期刊文献+

板翅式热交换器中一种新型正弦波纹流道的数值模拟 被引量:2

Numerical Simulation of a New Type of Sine Channel of Plate-fin Heat Exchanger
在线阅读 下载PDF
导出
摘要 采用数值模拟方法对板翅式热交换器周期性正弦流道中层流流体的传热性能进行研究,得出了翅片流道截面结构尺寸、振幅和波长对正弦流道传热综合性能的影响。结果表明,传热综合性能随截面宽度增大而降低,随着波长的增大而增大。截面高度对传热综合性能的影响呈现出不规律性,当截面高度5mm时综合性能最佳。振幅对综合性能的影响随雷诺数不同而不同,Re=50时随振幅增大综合性能不断降低;Re≥100时,在相同Re下,随着振幅增大,综合性能也提高。模型截面宽度2.5mm、截面高度5mm、振幅2mm、正弦波长30mm时具有最佳的综合性能。 The performance of heat-transfer in the periodic sine channel of laminar flow was studied by numerical simulation to obtain the effect of the corrugated inclination structure size, amplitude, wavelength of periodic sine channel on the combination property. It was found that with the increase of the breadth, the performance of heat transfer combination property de- creased, and the effect of wavelength was reversed. The effect of the cross-section height dis- played irregular, and when the corrugated inclination h : 5 mm the heat transfer combination property was the best. On the condition of different Reynolds number, the effect of amplitude was different, and when the corrugated inclination Re: 50 the heat transfer combination property decreased with the amplitude increasing, else when the corrugated inclination Re≥100 the effect of amplitude was reversed. The model of breadth b: 2.5 mm, corrugated inclination h = 5 mm, amplitude a= 2 mm and wavelength l: 30 mm had the best combination property.
出处 《石油化工设备》 CAS 2012年第5期6-9,共4页 Petro-Chemical Equipment
基金 河南省重点实验室项目(102300413207)
关键词 板翅式热交换器 正弦流道 数值模拟 综合性能 plate-fin heat exchanger sine channel numerical simulation combination property
  • 相关文献

参考文献11

  • 1董其伍,张壶.换热器[M].北京:化学工业出版社,2009.
  • 2Jinn-Yuh Jiang , Mu-Cheng Wu , Wen-Jeng Chang . Numerical and Experimental Studies of Three-dimen- sional Plate-fin and Tube Heat Exchangers[J]. Inter- national Journal of Heat and Mass Transfer, 1996, 39 (14) :3057-3066.
  • 3Sparrow E M, Hajiloo A. Measurements of Heat Trans- fer and Pressure Drop for an Array of Staggered Plates A- ligned Parallel to an Air Flow [J].Transaction of the ASME8,1980, 102:426-432.
  • 4Shah R K, London A L. Effects of Nonuniform Passa- ges on Compact Heat Exchanger Performance[J]. Journal of Engineering for Power of ASME, 1980, 102A:653-659.
  • 5董其伍,王丹,刘敏珊,宫本希.板翅式换热器数值模拟研究[J].化工设备与管道,2008,45(2):25-27. 被引量:13
  • 6李媛,凌祥.板翅式换热器翅片表面性能的三维数值模拟[J].石油机械,2006,34(7):10-14. 被引量:20
  • 7姚华,郑康乐,杨善让.板翅式热交换器单通道三维数值模拟研究[C]//中国电机工程学会.中国电机工程学会第十届青年学术会议.吉林:2010.137-142.
  • 8李海风.板翅热交换器倾斜波纹翅片传热与流动特性研究[D].济南:山东大学,2006.
  • 9王武林,魏琪.错列翅片板翅式换热器传热性能数值研究[J].华东船舶工业学院学报,2003,17(4):13-16. 被引量:5
  • 10孙伟松,高嵩,石凤涛.板翅结构应力分析[J].石油化工设备,2010,39(B08):4-7. 被引量:2

二级参考文献19

  • 1张洪涛,陈怀宁,吴昌忠,林泉洪.不锈钢及其板翅式换热器钎焊技术[J].宇航材料工艺,2005,35(4):12-18. 被引量:9
  • 2李媛,凌祥,虞斌.铝板翅式换热器翅片表面性能的试验研究[J].石油机械,2005,33(10):1-4. 被引量:12
  • 3祝银海,厉彦忠.板翅式换热器翅片通道中流体流动与传热的计算流体力学模拟[J].化工学报,2006,57(5):1102-1106. 被引量:44
  • 4Fehle R,Klas J,Mayinger F.Investigation of Local Heat Transfer in Compact Heat Exchangers by Holographic Interferometry[J].Experimental Thermal and Fluid Science,1995,10(2):181-191.
  • 5Zhang L W,Balachandar S,Tafti D K,et al.Heat sfer Enhancement Mechanisms in Inline and Staggered Parallel-plate Fin Heat Exchangers[J].International Journal of Heat and Mass Transfer,1997,40(10):2307-2325.
  • 6Jiao Anjun,Li Yanzhong,Chen Chunzheng,et al.Experimental Investigation on Fluid Flow Maldistribution in Plate-fin Heat Exchangers[J].Heat Transfer Engineering,2003,24(4):25-31.
  • 7Ranganayakulu Ch,Seetharamu K N,Sreevatsan K V.Effects of Inlet Fluid Flow Nonuniformity on Thermal Performance and Pressure Drops in Crossflow Plate-fin Compact Heat Exchangers[J].International Journal of Heat and Mass Transfer,1997,40(1):27-38.
  • 8Alberto Traverso,Aristide F,Massardo.Optimal Design of Compact Recuperators for Microturbine Application[J].Applied Thermal Engineering,2005,25(14-15):2054-2071.
  • 9Kays W M,London A L.Compact heat exchanger,3rd ed.NY:MacGraw-Hill Book Company,1984
  • 10W T Sba,C I Yang,T T Kao,et al.multidimensional numerical modeling of heat exchanger.International Journal of Heat and Fluid Flow,2002,23:222 ~ 231

共引文献43

同被引文献48

  • 1Bhutta MMA,HayatN,BashirMH,etal.CFDapplicationsinvarious heat exchangers design:a review[J]. Appl AppliedThermalEngineering,2012,32(2):1-12.
  • 2Liu Z,Li H,Shi L,et al. Numerical study of the air inlet angleinfluence on the air- side performance of plate- fin heat ex-changers[J].AppliedThermalEngineering,2015,89:356-364.
  • 3Goyal M,Chakravarty A,Atrey M D. Two dimensional modelfor multistream plate fin heat exchangers[J]. Cryogenics,2014,61:70-78.
  • 4Liu Z,Li H,Shi L,et al. Numerical study of the air inlet angleinfluenceontheair-sideperformanceofplate-finheatexchang-ers[J].AppliedThermalEngineering,2015,89:356-364.
  • 5Villanueva H H S,de Mello P E B. Heat transfer and pressuredrop correlations for finned plate ceramic heat exchangers[J].Energy,2015,88:118-125.
  • 6Nagarajan V,Chen Y,Wang Q,et al. CFD modeling and simu-lation of sulfur trioxide decomposition in ceramic plate- finhigh temperature heat exchanger and decomposer[J]. Interna-tionalJournalofHeatandMassTransfer,2015,80:329-343.
  • 7Aliabadi M K,Hormozi F. Performance analysis of plate-finheat exchangers:different fin configurations and coolants[J].Journal of Thermophysics and Heat Transfer,2013,27(3):515-525.
  • 8Fernández-SearaJ,DizR,UhíaFJ.Pressdropandheattrans-fer characteristics of titanium brazed plate-fin heat exchangerwith offset strip fins[J]. Applied Thermal Engineering,2013,51:502-511.
  • 9Yang Y J ,Li Y Z,Biao S,et al. Performance Evaluation ofHeat Transfer Enhancement in Plate- fin Heat ExchangerswithOffsetStripFins[J].PhysicsProcedia,2015,67:543-550.
  • 10李晓宁,数个群,李团兵,等. -种新型高效低压降的板翅式换热器翅片:中国,CN103994686A[P].2014-8-20.

引证文献2

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部