期刊文献+

混合驱动五杆月球车动力学分析 被引量:2

Dynamics analysis of hybrid-driven five-bar lunar rover
在线阅读 下载PDF
导出
摘要 根据月球车腿式移动机构的优点,针对混合驱动五杆月球车用拉格朗日法推出混合驱动五杆月球车的动力模型,得出各杆线速度和驱动力的表达式。通过设置具体参数对混合驱动五杆月球车模型进行分析,得出了混合驱动月球车的五杆机构运动仿真图、主动关节等效惯量,耦合惯量和驱动力矩的变化规律。结果表明,对于给定的运动规律,机构的位形对系统的主动关节等效惯量、耦合惯量和驱动力矩的影响较大。 According to the advantages of the leg type travelling mechanism of the lunar rover,a dynamics model for hybrid-driven five-bar lunar rover is presented in it based on the Langange method,so that the expression for liner speed of each bar and driving force is obtained.Then by setting specific parameter the model of the lunar rover is analyzed to obtain simulation chart for five bar mechanism of the hybrid-driven lunar rover,equivalent inertia as well as changing law of coupling inertia and driving torques of the active joints of mechanism.The results show that for a given motion,the configuration has a significant influence on the equivalent inertia,coupling inertia and driving torques.
作者 杨家军 奚斌
出处 《机械设计与制造》 北大核心 2012年第5期223-224,共2页 Machinery Design & Manufacture
关键词 混合驱动 五杆机构 月球车 动力学 Hybrid-driven Five-bar Lunar rover Dynamics
  • 相关文献

参考文献7

二级参考文献25

  • 1罗磊,莫锦秋,王石刚,蔡建国.并联机构动力学建模和控制方法分析[J].上海交通大学学报,2005,39(1):75-78. 被引量:24
  • 2王树新,姜文兰,刘又午.多臂机器人系统的动力学分析与实验[J].天津大学学报,1996,29(4):533-537. 被引量:3
  • 3程光蕴,贺惠农.两自由度连杆机构精确实现平面轨迹的研究[J].东南大学学报(自然科学版),1990,20(3):7-12. 被引量:39
  • 4于红英,唐德威,王建宇.平面五杆机构运动学和动力学特性分析[J].哈尔滨工业大学学报,2007,39(6):940-943. 被引量:46
  • 5孔建益 W.Funk.具有一个受控原动件的五杆机构精确实现给定函数的研究[J].中国机械工程,1996,7:106-108.
  • 6Ouyang P R, Li Q, Zhang W J, et al. Design, modeling and control of a hybrid machine[J]. Mechatronics, 2004, 14(10) : 1 197-1 217.
  • 7Yu Hongnian. Modeling and control of hybrid systems- a five bar mechanism case[J]. Internal Journal of Automation and Computing, 2006, 3(3) : 235 -243.
  • 8Craig J. Introduction to robotics[M]. New York: Addison-Wesley Publishing Company, 1986.
  • 9Armstrong-Helouvry B, Pierre Dupont, Canudas De Wit C. A survey of models, analysis tools and compensation methods for the control of machine with friction[J]. Automatica, 1994, 30(7): 1 083-1 138.
  • 10Ce.Zhang,R.R.L.Norton.Optimization of Parmeters for Specified Path Generation Using An Atlas of Coupler Curves of Geared Five-Bar Linkages[J].MMT1984,19(6):459-466.

共引文献139

同被引文献50

引证文献2

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部