摘要
针对大型模锻压机机架的疲劳失效形式,在承受拉、压复合作用下,以等效应力作为裂纹寿命估算的依据,并采用有限元进行疲劳寿命数值分析。分别计算不同应力集中系数、过载荷、残余应力、表面粗糙度取值下的疲劳寿命,并进行相应的敏度分析。通过仿真分析,得到影响疲劳寿命的关键因素变化趋势,为改进疲劳寿命提供直接依据。
About the fatigue failure of the large forging press frame,a foundation of calculating crack life was proposed based on equivalent stress under the composite action of tension and pressure,and the fatigue life numerical analysis was proceeded by using finite element.The fatigue life was calculated under different values of stress concentration coefficient,overload,the residual stress and the surface roughness respectively,and the corresponding sensitivity analysis was done.Through the simulation analysis,the variation tendency of fatigue life key factors is established,which provides direct basis for the fatigue life improvement.
出处
《机械强度》
CAS
CSCD
北大核心
2012年第2期303-307,共5页
Journal of Mechanical Strength
基金
国家重点基础研究发展计划(973计划)资助(2005CB724102)~~
关键词
组合机架
应力分析
等效应力
疲劳寿命
敏度分析
Combination frame
Stress analysis
Equivalent stress
Fatigue life
Sensitivity analysis
