期刊文献+

氧热法电石合成的反应平衡和热匹配分析 被引量:9

Thermodynamic analysis of calcium carbide synthesis and its thermal coupling with coke combustion
在线阅读 下载PDF
导出
摘要 针对氧热法电石合成中吸热的生成反应和放热的碳燃烧反应耦合,从热力学角度对电石生成途径、反应化学计量平衡以及吸、放热反应热耦合进行了分析。结果表明:(1)电石由CaO+3C→CaC2+CO一步直接生成的可能性更大;(2)不同化学计量对应4种不同反应体系,各体系电石平衡转化率都随温度升高而升高,随压强增大而减小,电石与氧化钙发生副反应的转化率大致为随温度升高而先升后降;(3)反应热匹配量和匹配条件取决于电石生成反应物料处理量和电石纯度要求。电石生成反应与燃烧供热反应耦合于同一反应器是可行的。 A thermodynamic analysis of the oxygen-heating calcium carbide synthesis process, where the endothermic calcium carbide synthesis is coupled with exothermic coke combustion, was conducted in order to select appropriate process conditions, in terms of reaction mechanisms, stoichiometry and heat coupling system. The results indicate that: (1) calcium carbide is most likely to be formed via a one-step mechanism (CaO +3C →CaC2 + CO ) ; (2) Four different systems having different ratios of feedstocks were analyzed and showed common features in that the equilibrium conversion rate increased with an increase in temperature or a decrease in pressure, and the conversion of the side reaction proceeding with calcium carbide initially increased, and then decreased with increasing temperature; (3) The heat matching feeds and matching conditions depend on the throughput and the purity of calcium carbide; coupling calcium carbide synthesis with coke combustion in a reactor is feasible under appropriate conditions.
出处 《北京化工大学学报(自然科学版)》 CAS CSCD 北大核心 2012年第2期1-6,共6页 Journal of Beijing University of Chemical Technology(Natural Science Edition)
基金 国家"973"计划(2011CB201306)
关键词 电石 热匹配 平衡转化率 热力学分析 calcium carbide thermal matching equilibrium conversion rate thermodynamic analysis
  • 相关文献

参考文献7

  • 1刘振宇,刘清雅,李国栋,等.一种电石生产方法:中国,101327928A[P].2008-12-24.
  • 2姚润生.电石反应热力学初探[J].维纶通讯,1992,12(3):10-12. 被引量:1
  • 3El-Naas M H,Munz R J,Ajersch F.Solid-phase synthe-sis of calcium carbide in a plasma reactor[J].Plasma Chemistry and Plasma Processing,1998,18(3):409-427.
  • 4Tagawa H,Sugawara H.The kinetics of the formation of calcium carbide in a solid-solid reaction[J].Bulletin of the Chemical Society of Japan,1962,35(8):12761279.
  • 5黄海芳.再谈炉外法冶炼热平衡计算[J].中国钼业,1999,23(1):24-28. 被引量:3
  • 6Li G D, Liu Q Y, Liu Z Y, et al. Production of calcium carbide from fine biochars [ J]. Angew Chem Int Ed,2010, 49(45): 8480-8483.
  • 7熊谟远.电石生产及其深加工产品[M].北京:化学工业出版社,1985.

二级参考文献10

  • 1李洪桂.稀有金属冶金原理工艺,第七章部分[M].北京:冶金工业出版社,..
  • 2(俄)M.N.加西克 张烽 等.铁合金生产的理论和工艺[M].北京:冶金工业出版社,1994.15,16,330,370,371.
  • 3(西德)G.福尔克特 俞辉.铁合金冶金学[M].上海:上海科技出版社,1978.51-58,388(15119·1938).
  • 4(苏)M.A雷斯 周进华 等.铁合金冶炼[M].北京:冶金工业出版社,1986.235,270,284(15062·3743).
  • 5杨洪祥.铁合金生产工艺[M].冶金部技工学校教材办,1984.7,8,204.
  • 6张文钲 康泰成 等.钼冶炼[M].西安:西安交通大学出版社,1991.333,334.
  • 7(苏)A.伏尔斯基 董庆和.冶金过程理论[M].北京:科学出版社,1987.284.
  • 8(英)O·库巴谢夫斯基 邱竹贤.冶金热化学[M].北京:冶金工业出版社,1985.262.
  • 9黄海芳.钼精矿焙烧“干基产出率”和“元素富集率”等参数的推导及应用[J].铁合金,1997,28(5):16-20. 被引量:6
  • 10黄海芳.炉外法金属热还原冶炼热平衡探讨及钼铁配料实践[J].中国钼业,1997,21(4):26-30. 被引量:11

共引文献4

同被引文献119

引证文献9

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部