期刊文献+

含羧基聚酰亚胺薄膜的制备与性能研究 被引量:7

Preparation and Properties of Polyimide Film with Carboxyl Group
在线阅读 下载PDF
导出
摘要 以3,5-二氨基苯甲酸(35DABA)、4,4’-二氨基二苯醚(44ODA)和3,3,’4,4’-四甲酸联苯二酐(BPDA)为原料,在强极性非质子有机溶剂中进行聚合反应,制得了高粘度含羧基聚酰胺酸(CPAA)溶液,经涂膜、热亚胺化,得到了坚韧透明的含羧基聚酰亚胺(CPI)薄膜,并对其性能进行了研究。结果表明:CPI薄膜具有较高的表面能,在宽广的频率范围内,其电容、介质损耗基本保持不变,具有良好的高低频稳定性;薄膜的强度与韧性均较高,可应用于制作高性能柔性覆铜板;薄膜在紫外线短波长区具有良好的吸收能力,其截止波长为320 nm,在可见光波长范围内,其透过率达80%以上。 Using 3,5-diaminobenzoic acid(35DABA),4,4'-diaminodipehenyl ether(44ODA) and 3,3',4,4'-tetracarboxylbiphenyl dianhydride(BPDA) as raw materials,a highly viscous polyamide acid with carboxyl group(CPAA) solution was prepared in aprotic organic solvents.A tensile and transparent polyimide film with carboxyl group(CPI) was prepared by thermal imidization of CPAA thin layer,and the properties of the film were studied.The results show that the CPI film has high surface energy and good stability under high and low frequency;the capacitance value and dielectric loss do not change in a broad range of frequency.With high strength and good toughness,the film can be used to prepare high performance flexible copper clad laminate.The film also has good absorptive capacity in the short wavelength region of ultraviolet;its cutoff wavelength is 320 nm.The transmittance attains more than 80% in the visible light region.
出处 《绝缘材料》 CAS 北大核心 2011年第5期1-4,共4页 Insulating Materials
基金 上海市博士后基金重点项目(09R21421000) 中央高校基本科研业务费专项资金资助(11D10514)
关键词 3 5-二氨基苯甲酸 含羧基聚酰亚胺 薄膜 制备 性能 3 5-diaminobenzoic acid polyimide with carboxyl structure film preparation properties
  • 相关文献

参考文献15

  • 1Sava, Mitica. Synthesis and Properties of Polyaminoamide Containing Bismaleimide[J].Materiale Plastice(Bucharest, Romania), 2006,43(1) :46 - 50.
  • 2周超,许梅芳,虞鑫海.间位双酚A型聚酰亚胺薄膜的制备与性能研究[J].绝缘材料,2011,44(2):21-25. 被引量:4
  • 3Takashi Kurose,Vladimir E. Yudin, Joshua U. Otaigbe et al. Compatibilized Polyimide (R-BAPS)/BAPS - Modified Clay Nanocomposites with Improved Dispersion and Properties[J]. Polymer, 2007, 48(24) :7130 - 7138.
  • 4Shoji Kamiya, Harunori Furuta, Masaki Omiya. Adhesion Energy of Cu/Polyimide Interface in Flexible Printed Circuits[J]. Surface and Coatings Technology, 2007, 202 (4 - 7) : 1084- 1088.
  • 5费斐,虞鑫海,徐永芬,赵炯心,傅菊荪.4,4'-二氨基-4”-羟基三苯甲烷型聚酰亚胺薄膜的制备及其表面性能研究[J].绝缘材料,2008,41(2):22-25. 被引量:15
  • 6Villaluenga J P G,Seoane B,Hradil J,et al. Gas Permeation Characteristics of Heterogeneous ODPA-BISP Polyimide Membranes at Different Temperatures[J]. Journal of Membrane Science, 2007, 305(1 - 2) : 160 - 168.
  • 7虞鑫海,胡志强.3,3’-二氨基二苯醚的合成及其聚酰亚胺[J].绝缘材料,2001,34(4):13-16. 被引量:21
  • 8Shaikh Md. Mominul Alam, Tarek Agag, Takehiro Kawauchi,et al. Organic-inorganic Hybrids Containing Polyimide, Organically Modified Clay and In Situ Formed Polydimethylsiloxane[J].Reactive and Functional Poly- mers, 2007, 67(11) : 1218 - 1224.
  • 9虞鑫海,徐永芬,赵炯心,傅菊蓀.1,4-双(4-氨基苯氧基)苯及其聚酰亚胺树脂的合成[J].绝缘材料,2007,40(3):11-14. 被引量:19
  • 10Jaime Puig-Pey Gonzdlez, Alain Lamure and Francois Senocq. Polyimide(PI) Films by Chemical Vapor Deposition(CVD) :Novel Design,Experiments and Characterization[J]. Surface and Coatings Technology, 2007,201(22- 23) : 9437- 9441.

二级参考文献60

共引文献45

同被引文献98

引证文献7

二级引证文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部