期刊文献+

MB8镁合金高周疲劳实验研究 被引量:2

Experimental Investigation on High Cycle Fatigue Behaviors of MB8 Magnesium Alloy
在线阅读 下载PDF
导出
摘要 采用升降法对MB8镁合金室温高周疲劳行为进行实验研究。结果表明:利用升降法计算出MB8镁合金在应力比R=0.1,循环基数为107条件下的疲劳强度为90.2MPa,相当于其抗拉强度的34%左右;合金的疲劳裂纹萌生于试样表面,裂纹扩展区由小的平面状断面组成,没有明显的疲劳辉纹存在,合金疲劳断口呈现韧性断裂特征。 The high cycle fatigue behavior of MB8 magnesium alloy at room temperature was investigated by fatigue test using up-and-down method.The fatigue strength of MB8 magnesium alloy was 90.2MPa under stress ratio R=0.1 and cycles N=107 conditions.The fatigue strength was about 34% of its tensile strength.The fatigue cracks initiated at surface of the samples.The fatigue crack propagation regions of MB8 alloy were composed of some facets,and without obvious fatigue striations.The fatigue fracture surface of specimens revealed the fracture characteristics of dimple.
作者 杨友
出处 《材料工程》 EI CAS CSCD 北大核心 2010年第12期44-46,共3页 Journal of Materials Engineering
基金 吉林省科技厅应用基础研究资助项目(20090544)
关键词 MB8镁合金 高周疲劳 升降法 疲劳强度 MB8 magnesium alloy high cycle fatigue up-and-down method fatigue strength
  • 相关文献

参考文献8

  • 1张丁非,彭建,丁培道,潘复生.镁及镁合金的资源、应用及其发展现状[J].材料导报,2004,18(4):72-76. 被引量:63
  • 2訾炳涛,王辉.镁合金及其在工业中的应用[J].稀有金属,2004,28(1):229-232. 被引量:93
  • 3MORDIKE B L,EBERT T.Magnesium:properties-applicationspotential[J].Materials Science and Engineering A,2001,(1):37-45.
  • 4余琨,黎文献,王日初,马正青.变形镁合金的研究、开发及应用[J].中国有色金属学报,2003,13(2):277-288. 被引量:417
  • 5LI F,WANG Y,CHEN L J,et al.Low-cycle fatigue behavior of two magnesium alloys[J].Journal of Materials Science Letters,2005,(40):1529-1531.
  • 6OGAREVIC V V,STEPHENS R I.Fatigue of magnesium alloys[J].Annual Review Materials Science,1990,(20):141-177.
  • 7MAYER H,LIPOWSKY H,PAPAKYRIACOU M,et al.Fatigue properties of high pressure die cast magnesium alloys at high numbers of cycles[A].Process 7th International Fatigue Conference[C].Beijing:Higher Education Press,1999.
  • 8徐灏.疲劳强度[M].北京:高等教育出版社,1987.

二级参考文献78

共引文献558

同被引文献10

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部