期刊文献+

霜形成对翅片管换热器空气侧表面传热系数影响的实验研究 被引量:3

An experimental investigation on the effect of the frosting on surface heat transfer coefficient of finned heat exchanger
在线阅读 下载PDF
导出
摘要 在空冷系统中,换热器空气侧的表面结霜问题是影响其应用和发展的主要问题。通过对结霜条件下翅片管换热器空气侧换热性能的实验研究,得出了空气湿度、翅片间距、风速等参数变化对空气侧当量表面传热系数的影响;结果表明在一定的范围内,结霜前期h0值随结霜时间τ急剧下降,在结霜后期,这些参数对h0值的影响大为削弱。 In an air - cooled system, the frosting of heat exchanger at air side is a main problem to limit its application and development. Heat transfer performance of finned - tube heat exchanger at air side was investigated experimentally at the condition of frosting. The effect of the variation of air humidity, fin space and wind speed on equivalent surface heat transfer at air side was obtained. The results showed that at the initial stage of frosting, ho decreases sharply with increasing frosting time ; at the later stage of frosting, these parameters have little effect on h0.
作者 陈瑞球 周广
出处 《低温与超导》 CAS CSCD 北大核心 2010年第4期54-56,共3页 Cryogenics and Superconductivity
关键词 换热器 翅片管 结霜 当量表面传热系数 Heat exchanger, Finned - tube, Frosting, Equivalent convective heat transfer coefficient
  • 相关文献

参考文献6

  • 1Tso C P,Cheng Y C,Lai A C K.An improved model for predicting performance of finned tube heat exchanger under frosting condition,with frost thickness variation along fin[J].Applied Thermal Engineering,2006,26:111-120.
  • 2Yan Wei-Mon,Li Hung-Yi,Tsay Yeong-Ley.Thermofluid characteristics of frosted finned-tube heat exchangers[J].International Journal of Heat and Mass Transfer,2005,48:3 073-3 080.
  • 3Qu Kaiyang,Komori Satoru,Jiang Yi.Local variation of frost layer thickness and morphology[J].International Journal of Thermal Sciences,2006,45:116-123.
  • 4Na Byeongchul,Webb Ralph L.New model for frost growth rate[J].International Journal of Heat and Mass Transfer,2004,47:925-936.
  • 5夏凊,周振宇,周兴禧.霜形成对翅片管式蒸发器性能影响的研究[J].工程热物理学报,1997,18(6):717-720. 被引量:10
  • 6陈瑞球,韩学廷.肋片管蒸发器结霜对传热性能影响的实验研究[J].暖通空调,2005,35(2):15-19. 被引量:8

二级参考文献12

  • 1加契洛夫TS.在结霜工况下翅片式空冷器的结构形状及其运行[A].刘训海译.见:第十五届国际制冷大会论文译丛(中册)[C].,1981.356-358.
  • 2Kondepudi S N, O' Neal D L. The effects of frost growth on extended surface heat exchanger performance: a review. In: ASHRAETrans. 1987, 93(2). 258- 274.
  • 3Abdel R M, Hifni M A, Sherif S A. Heat and mass transfer from a laminar humid air stream to a plate at subfreezing temperature. Int J Refrig, 1984, 7(1): 49-55.
  • 4加契洛夫TS 艾瓦诺娃VS 徐景贤 刘厚培译.翅片管空气冷却器表面结霜的特性[A].徐景贤,刘厚培译.见:第十五届国际制冷大会论文译丛(中册)[C].,1981.359-362.
  • 5Kondepudi S N, O'Neal D L. Performance of finnedtube heat exchangers under frosting conditions: Ⅰ&Ⅱ. Int J Refrig, 1993, 16(3): 175 - 184.
  • 6Oskarsson S P, Krakow K I, Lin S. Evaporator models for operation with dry, wet, and frosted finned surfaces part Ⅰ: heat transfer and fluid flow theory.In: ASHRAE Trans. 1990, 96(1). 373- 380.
  • 7Oskarsson S P, Krakow K I, Lin S. Evaporator models for operation with dry, wet, and frosted finned surfaces part Ⅱ: evaporator models and verificatior.In: ASHRAE Trans. 1990, 96(1). 381 - 392.
  • 8Sami S M, Duong T. Mass and heat transfer during forst growth. In: ASHRAETrans. 1989, 95(1). 158- 164.
  • 9夏凊,周振宇,周兴禧.霜形成对翅片管式蒸发器性能影响的研究[J].工程热物理学报,1997,18(6):717-720. 被引量:10
  • 10夏订,周兴禧,周振宇.翅片管式蒸发器结霜问题的数值分析与实验研究[J].上海交通大学学报,1998,32(7):28-31. 被引量:7

共引文献16

同被引文献28

  • 1中国编辑学会,等.出版专业实务(中级)[M].上海:上海辞书出版社,2007.
  • 2Catarino I,Afonso J,Martins D,et al.6K Solid State Engergy Storage Unit[J].Cryogenics,2010,50(2)102-110.
  • 3Takahiro Yamada,Chiharn Urano,Hidefumi Nishinaka,et al.Single-Chip 10-V Programmable Josephson Voltage Standard System Based on a Refrigerator and Its Precision Evaluation[J].IEEE Trans.on Applied Supercond.,2010,20(1):21-25.
  • 4LEE K S, KIM W S. The effects of design and operating factors on the frost growth and thermal performance of a fiat plate fin-tube heat exchanger under the frosting con- dition [ J ]. KSME International Journal, 1999,13 ( 12 ) : 973 - 981.
  • 5KONG T W, LEE S C, LEE Y H,et al. A study on the air vaporizer for liquefied natural gas with super low tem- perature[ C ]//Proceedings of the 3rd Asian Conference on Refrigeration and Air-conditioning. Gyeongju (South Korea) : [ s. n. ] ,2006.
  • 6JEONG H, CHUNG H. Optimum design of vaporizer fin with liquefied natural gas by numerical analysis [ J ]. KSME International Journal,2006,20 (4) : 545 - 553.
  • 7JEONG H, CHUNG H. Experimental study on the char- acteristics of longitudinal fin air-heating vaporizers in different seasons[J]. Journal of Mechanical Science and Technology, 2008,22 (5) : 981 - 990.
  • 8刘/J',JlI.结霜工况下翅片管换热器传热传质的数值模拟(硕士学位论文)[D].上海:上海交通大学,2007:9-68.
  • 9GAVELLI F. Computational fluid dynamics simulation of fog clouds due to ambient air vaporizers [ J ]. Journal of Loss Prevention in the Process Industries ,2010,23 (6) : 773 - 780.
  • 10KLIMNEKO V V. Heat transfer intensity at forced flow boiling of cryogenic liquids [ J ]. Cryogenic, 1982,22 (6) :569 -576.

引证文献3

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部