摘要
为了更好分析系统的放电特性和工作状态,优化脉冲功率源系统的设计,研制了一套1.2MV重复频率高功率微波驱动电源测试诊断系统。通过研究高电压、大电流测试技术和数据采集、信号处理、故障诊断技术,同时运用虚拟仪器和电磁兼容等技术,探索开发了一套重复频率脉冲电压电流测试诊断系统。结合系统的研制需求,通过分析各种数据采集设备的优缺点,硬件选用了凌华公司的PXI数据采集系统,软件采用LabVIEW,设计开发了重复频率快信号的采集诊断程序,研制出实时诊断系统,并在1.2MV重复频率脉冲电源系统中应用,实现了对重复频率电源关键点电压电流的测试以及数据的诊断、处理和远程在线监测,出现故障时报警、存储数据并自动断电等功能。
In order to analyze the discharge performance and improve the design of the power system, a set of measurement and diagnosis system for the 1.2 MV repetitive pulsed power source, which supplies the drive power for a high power microwave source, has been designed by studying the high-voltage, high-current testing technology, data acquisition, signal processing, fault diagnosis, virtual instruments and electromagnetic compatibility technology, etc. A resistive-capacitive divider and a Rogowski coil are adopted in measurement; ADLINK corporation’s PXI chips are used in data acquisition; data transmission system, condition monitoring and data analysis are developed by LabVIEW. This system can realize on-line monitoring and data analysis for the repetitive pulsed power source.
出处
《强激光与粒子束》
EI
CAS
CSCD
北大核心
2010年第1期207-210,共4页
High Power Laser and Particle Beams
基金
国家高技术发展计划项目
关键词
重复频率
脉冲功率源
测试
诊断
repetitive frequency
pulsed power source
measurement
diagnosis
