摘要
探讨在ZA205i-190型喷气织机上消除稀密路疵点的各项措施。通过分析机械磨损产生稀密路的原因,可有针对性地采取检查、更换等措施;通过在织机上加装验布装置检查稀密路的措施以及合理设定"防止档疵"功能键参数,可提升坯布质量和档次;通过合理设定上机张力、经位置线等工艺参数,也可有效减少稀密路。综合以上措施,可使入库一等品率由98.2%上升到99.5%。
Measures of eliminating motion mark on ZA205i-190 airjet loom were discussed. Inspection and replace et al measures should be adopted clearly through analysing causes of motion mark by mechanical abrasion. Gray goods quality and classification could be improved by installing cloth inspecting device to check motion mark and setting param- eter rationally of preventing mark function button. By setting loom tension, warp shed line et al parameter, motion mark could be reduced effectively ,finally first grade products that put in storage could be improved from 98.2% to 99.5%.
出处
《棉纺织技术》
CAS
CSCD
北大核心
2009年第12期47-48,共2页
Cotton Textile Technology
关键词
喷气织机
稀密路
机械磨损
灯光-检验
倒转量
上机张力
Airjet Loom,Motion Mark,Mechanical Abrasion, Light Test,Amount of Reversal, Loom Tension
