摘要
介孔分子筛膜的制备在理论上有着极其重要的意义，尤其ＭＣＭ－４８分子筛膜可望在混合液的分离精制中发挥巨大作用。利用水热晶化法以十六烷基三甲基溴化铵（ＣＴＡＢ）、ＮａＯＨ、水、正硅酸乙酯（ＴＥＯＳ）为原料在二氧化硅玻璃片上合成出ＭＣＭ－４８分子筛膜。系统考察了溶胶浓度、晶化时间、晶化温度等因素对成膜的影响。结果表明，在一定的凝胶组成范围内，欲合成出理想的ＭＣＭ－４８分子筛膜，基片表面必须处理得当，晶化时间、晶化温度无法不宜作太大变动。结合样品的ＩＲ、ＸＲＤ谱图，确定了ＭＣＭ－４８膜的最佳制备条件：时间为２ｄ，温度为３７３Ｋ，配比为ｎ（Ｈ２Ｏ）：ｎ（ＣＴＡＢ）：ｎ（Ｎａ２Ｏ）：ｎ（ＳｉＯ２）＝１７８０：１６．９：７．１：３０．１。
The preparation of mesoporous molecular sieve film plays important role in theory, especially molecular sieve MCM-48 is probably going to play an important role in separating and refining of mixture solution. MCM-48 was prepared hydrothermally with CTAB NaON, H 2O, TEOS as source materials on SiO 2 sheet glass. Many influential factors in forming film, such as gel concentration, crystallzation time, crystallzation temperature have been systematically studied. The results show that the surface of base sheet must be treated properly, and crystallization time and crystallization temperature were not changed greatly. To synthesize the ideal MCM-48 in certain range of gel composition, IR, XRD spectrums of samples are used. The best preparation conditions of MCM-48 film are: time 2 d; temperature 373 K; proportion: n (H 2O): n (CTAB): n (Na 2O): n (SiO 2)=1 780:16.9:7.1:30.1.
出处
《抚顺石油学院学报》
1998年第4期16-19,共4页
Journal of Fushun Petroleum Institute
关键词
分子筛膜
制备
水热晶化法
介孔分子筛膜
Molecular sieve film MCM-48
Preparation
Hydrothermal crystallization method
