摘要
利用２ＫＷ横流ＣＯ２激光器，在Ａ３钢基材表面进行钴基自熔合金激光熔铸的工艺试验。着重研究激光输出功率、扫描速度、光束辐照状态、预热温度、粉末粒度以及涂层粘结剂等工艺参数对熔铸涂层几何外形主要参数界面角Φ及高宽比Ｗ的影响。
Melt-casting technique was used to build up Co-base alloy clading on A 3 plain steel plate. It follows that the characters of the shape of the build up, i.e. the wetting angle and the ratio of hight to width of the build up are stongly dependent upon the laser out-put power,scan rate of the laser spot, pre-heating temperature, the maner of irradiation, and the particle size of alloy as well as bonding reagent.
出处
《激光杂志》
CAS
CSCD
北大核心
1998年第5期36-38,共3页
Laser Journal
关键词
激光熔铸
界面角
高宽比
金属材料
涂层
laser melt-casting, wetting angle, the ratio of height/width.
