摘要
对厚壁件内孔拉削精度进行了试验研究，结果表明：刀具初期磨损阶段，工件孔径尺寸偏大，且变化较快；刀具正常磨损阶段，工件孔径尺寸偏小，尺寸稳定；入口处锥度较大．由于振动原因入口处椭圆度较大．上述规律对于控制均匀厚壁零件内孔拉削精度是有益的．
Experimental study of broaching precision of heavy wall workpiece shows that workpiece aperture turns large in initiative wearing stage of the tool,and the change is fast;workpiece aperture turns small in normal wearing stage,and the dimension is stable.The coning of entry is larger;the ovality of entry is larger because of vibration The results are useful in broaching precision control of heavy wall workpiece.
出处
《哈尔滨理工大学学报》
CAS
1998年第2期1-3,共3页
Journal of Harbin University of Science and Technology
关键词
厚壁件
内孔拉削
精度
heavy wall workpiece
hole broaching
precision
