期刊文献+

基于血液撞击损伤机理的高速螺旋血泵仿真分析 被引量:16

Simulation analysis of high-speed spiral blood pump based on impacting injure principle of blood
暂未订购
导出
摘要 采用血液流变学及应力波理论,对高速螺旋血泵中血液撞击损伤机理进行研究,分析红细胞-固壁撞击破碎的过程和红细胞膜冲击破碎的条件;通过血液撞击损伤实验,对不同撞击速度下血液生理性能指标变化及红细胞微观形态进行观测分析,得出红细胞破碎的临界撞击速度;结合所设计的螺旋轴流血泵及螺旋混流血泵,应用多相悬浮体CFD仿真技术,对血泵中的速度场进行仿真分析。研究结果表明:当垂直撞击速度达到6m/s以上时,红细胞有可能发生破裂而导致溶血;所设计的螺旋混流血泵中血液由于红细胞撞击破碎而导致的溶血情况并不严重,其血液撞击损伤程度比螺旋轴流血泵的撞击损伤程度低。 The impacting injure principle of blood in the high-speed spiral blood pump was researched using the theory of hernorheology and stress wave. The fragmentation process and conditions of impacting between red blood cell and solid wall were analyzed. Through the observation analysis on the blood living performance and red blood cell micro shapes at several impacting speeds, the critical impact speed on the red blood cell fragmentation was obtained by blood impacting experiment. Combining the designed spiral axial blood pump and spiral mixed blood pump, the speed field of blood pump Were simulated and analyzed using the multiphase suspend body CFD simulation technology. The research results indicate that red blood cell may be broken to lead hemolysis if the perpendicular impact speed is larger than 6 m/s. The hemolysis status caused by red blood cell impact fragmentation is not severe in the designed spiral mixed blood pump. The injure degree of blood impacting is lower than that of spiral axial blood pump.
作者 云忠 谭建平
出处 《中南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2008年第1期135-142,共8页 Journal of Central South University:Science and Technology
基金 国家自然科学基金资助项目(50775223) 湖南省自然科学基金资助项目(02JJY2080)
关键词 螺旋血泵 撞击 溶血 仿真 spiral blood pump impacting hemolysis simulation
  • 相关文献

参考文献15

  • 1Weiss W J. Recent improvement in a completely implanted total artificial heart[J]. ASAIO Journal, 1996, 42: 342-345.
  • 2李津荣,翁铭庆.人工心脏研究进展[J].国外医学(生物医学工程分册),2000,23(2):103-106. 被引量:12
  • 3云忠,龚中良,谭建平,李国荣,徐先懂.旋转叶轮血泵的发展与展望[J].生物医学工程学杂志,2005,22(1):151-154. 被引量:13
  • 4Sezai A. Major organ function under mechanical support: Comparative studies of pulsatile and nonpulsatile circulation[J]. Artif Organs, 1999, 23(3): 280-284.
  • 5徐先懂,龚中良,谭建平.基于外磁场耦合的血泵驱动系统[J].中南大学学报(自然科学版),2007,38(4):711-714. 被引量:12
  • 6蔺嫦燕,李冰一,姜以岭,王景,阎殿甲,吴汉琨,刘婷,孙衍庆.螺旋血泵的研制及其实验研究[J].北京生物医学工程,2003,22(2):136-139. 被引量:17
  • 7Kamcncva M V, Burgreen G W, Kono K, ct al. Effects of turbulent stresses upon mechanical hemolysis: Experimental and computational analysis[J]. ASAIO Journal, 2004, 50(5): 418-423.
  • 8Philip J L, Jaffrin M Y, Ding L. Hemolysis during membrane plasma separation with pulsed flow filtration enhancement[J]. Journal of Biomechanical Engineering, 1994, 116(4): 514-520.
  • 9Tamagawa M, Minakawa S. Predictions of index of hemolysis in shear blood flow: Effects of exposure time under shear stress on prediction accuracy[J]. JSME ,International Journal, Series C: Mechanical Systems, MaChine Elements and Manufacturing, 2003, 46(2): 604-613.
  • 10Kim D W, Mitamura Y. Prediction of hemolysis in intracardiac axial flow blood pumps for optimization of the impellers[J]. Transactions of the Korean Institute of Electrical Engineers, 2002, 51(9): 431-437.

二级参考文献75

  • 1揭贵生,马伟明.一种基于自适应输入—输出线性化的无刷直流电机参数辨识方法[J].中南大学学报(自然科学版),2005,36(6):1069-1073. 被引量:4
  • 2蔺嫦燕,孙衍庆,董培青,魏文宁,王建华,王秀敏.微型血泵的研制及其模拟实验研究[J].中国生物医学工程学报,1997,16(1):64-69. 被引量:18
  • 3Eggers J. Nonlinear dynamics and break up of free-surface flows [J]. Review of Modern Physics, 1997,69 (3) : 865- 929.
  • 4Reznik S N, Yarin A L. Spreading of a viscous drop due to gravity and capillarity on a horizontal or an inclined dry wall [J]. Phys Fluids, 2002, 14(1):118 -132.
  • 5Javier F, Castellanos G A. One-dimensional models for slender axisymmetric viscous liquid bridges [J].Phys Fluids, 1996,8(11) : 2837 - 2846.
  • 6Gennes D P G. Wettingt statics and dynamics [J].Review of Modern Physics, 1985, 57(3):827 - 863.
  • 7Cox R G. The dynamics of the spreading of liquids on a solid surface. Part 1 : Viscous flow [J]. Journal of Fluid Mechanics, 1986, 168:169- 194.
  • 8Francois M, Shyy W. Micro-scale drop dynamics for heat transfer enhancement [J]. Progress in Aerospace Sciences, 2002, 38(2): 275- 304.
  • 9LI Jian-ping, DENG Gui-ling, Technology development and basic theory study of fluid dispensing-A review[C]. Proceedings of the Sixth IEEE CPMT Conference on High Density Microsystem Design and Packaging and Component Failure Analysis, HDP'04. Piscataway:institute of Electrical and Electronics Engineers Inc, 2004: 198-205.
  • 10Chen X B, Shoenau G, Zhang W J. Modeling of time-pressure fluid dispensing processes [J] IEEE Transactions on Electronics Packaging Manufacturing, 2000,23(4):300 - 305.

共引文献63

同被引文献139

引证文献16

二级引证文献56

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部