期刊文献+

高分子发光二极管载流子注入过程研究 被引量:9

Carrier injection process of polymer light-emitting diodes
原文传递
导出
摘要 采用交流阻抗谱,电容-电压,电容-频率等实验方法,研究了共轭高分子MEH-PPV(poly[2-methoxy,5-(2-ethylhexoxy)-1,4-phenylene vinylene])发光二极管的载流子注入过程.对于结构为ITO/PEDOT/MEH-PPV/Ba/Al的发光器件,实验结果表明,电极界面是欧姆接触的,载流子的注入是非平衡的,器件薄膜中存在陷阱容易俘获注入电荷,形成空间电荷区,陷阱密度约为3.75×1016cm-3. The carrier injection process of polymer light- emitting diodes (PLEDs) with MEH- PPV ( poly [ 2- methoxy, 5 - ( 2- ethylhexoxy) - 1,4-phenylene vinylene] ) as the light-emitting layer, was investigated using impedance spectroscopy, capacitance-voltage (C-V) and capacitance-frequency (C-F) techniques. The diodes have the configuration of ITO/PEDOT/MEH-PPV/Ba/AI. The experiments showed that there is an ohmic contact between electrodes and MEH-PPV, and holes and electrons injected from the cathodes are unbalanced. Charged traps in the MEH-PPV result in space-charge under positive bias, and the trap concentration was estimated at about 3.75 × 10^16 cm^-3
出处 《物理学报》 SCIE EI CAS CSCD 北大核心 2007年第5期2974-2978,共5页 Acta Physica Sinica
基金 国家自然科学基金(批准号:90201031 50573024) 教育部科学技术研究重点项目(批准号:104208) 国家重点基础研究发展计划(973)项目(批准号:2002CB61340205)资助的课题~~
关键词 高分子发光二极管 交流阻抗谱 cole-cole图 载流子注入 polymer light-emitting diodes (PLEDs), impedance spectroscopy, cole-cole figure, carrier injection
  • 相关文献

参考文献17

二级参考文献80

共引文献67

同被引文献99

引证文献9

二级引证文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部