期刊文献+

电机定子虚拟样机建模与模态仿真研究

Modeling and Mode Analysis of Stator of Electrical Machine Based on Virtual Prototype Technology
在线阅读 下载PDF
导出
摘要 根据电机定子的结构特点及定子叠片和机座通风隔板对振动的影响分析,采用Pro/E软件建立了YKSL1730电机定子虚拟样机模型,导入V isualNastran仿真软件中进行模态仿真研究,得到定子的固有频率和三个典型频率区域振型,分析了在不同定子内径下定子的固有频率情况,仿真结果对振动实验和定子结构优化具有指导意义. Based on the structeere features of stators,laminated cylinders and well-ventilated block, virtual prototyping models of stators are established by a 3-D modeling software, Pro/Engineer. With the models, mode analysis is carried out by a finite element analysis software, and visualNastran. Natural frequencies and three kinds of vibration shape are obtained. By changing the inside diameter value of stator, influences of inside diameter on the natural frequencies are investigated. Simulation results show that it is hepful to the vibrational test and optimization of the stator.
出处 《湖南工程学院学报(自然科学版)》 2007年第1期34-38,共5页 Journal of Hunan Institute of Engineering(Natural Science Edition)
关键词 电机定子 定子内径 虚拟样机建模 模态仿真 固有频率 振型 stator inside diameter of stator virtual prototyping model mode analysis natural frequency vibration shape
  • 相关文献

参考文献6

  • 1Singal R K,Williams R,Virma P.Theoretical and experimental study of vibrational behaviour of laminated stators of electrical machines[J].Mechanical System and Signal Processing,1992,(6):535-549.
  • 2W ang H.The Vibrational Modes of Thick Cylinders and the Influence ofLaminations[D].PhD Thesis,University of Saskatchewan,Saskatoon,Canada,1995.
  • 3Wang H,Williams K.A vibrational mode analysis of free finite -length thick cylinders using the finite element method[J].J.of ASME Vibration and Acoustics,1998,120:371-377.
  • 4吴建华.基于物理模型开关磁阻电机定子模态和固有频率的研究[J].中国电机工程学报,2004,24(8):109-114. 被引量:70
  • 5王宏华,王治平,江泉.开关型磁阻电动机固有频率解析计算[J].中国电机工程学报,2005,25(12):133-137. 被引量:38
  • 6Y.J.Lin and R.Farahati.CAD-Based Virtual Assembly Prototyping-A Case Study.The International Journal of Advanced Manufacturing Technology,2003.

二级参考文献23

  • 1吴建华.基于物理模型开关磁阻电机定子模态和固有频率的研究[J].中国电机工程学报,2004,24(8):109-114. 被引量:70
  • 2Camerson D E, Lang J H, Umans S D. The origin and reduction of acoustic noise in doubly salient variable-reluctance motors [J]. IEEE Trans. on Industry Application, 1992, 28(6): 1250-1255.
  • 3Besbes M, Ren Z. Vibration diagnostic for doubly salient variable reluctance motors [C]. Proc. of ICEM 94, Paris, France, 1994.
  • 4Cai W, PillayP, Omekanda A. Analytical formulae for calculating SRM modal frequencies for reduced vibration and acoustic noise design[C]. IEEE IEMDC, Boston, MA, 2001, 203-207.
  • 5Long S A, Zhu Z Q, Howe D. Vibration behaviour of stators of switched reluctance motors [J]. IEE Proc. on Electrical Power Application, 2001, 148(3): 257-264.
  • 6Pillay P, Cai W. An investigation into vibration in switched reluctance motors [J]. IEEE Trans. on Industry Applications, 1999, 35(3):589-596.
  • 7Tang Zhangjun. Vibration analysis and reduction in switched reluctance motors [D]. Ph.D. thesis, Clarkson University, 2002.
  • 8Cai W, Tang Zhanjun. Impact of stator windings and end-bells on resonant frequencies and mode shape of switched reluctance motors[J]. IEEE Trans. on IndustryApplications, 2002, 38(4): 1027-1036.
  • 9Husain I. Minimization of torque ripple in SRM drives[J]. IEEE Trans on IE, 2002, 49(1): 28-39.
  • 10Cameron D E, Lang J H, Umans S D. The origin and reduction of acoustic noise in doubly salient variable-reluctance motors[J]. IEEE Trans. onIA, 1992, 28(6): 1250-1255.

共引文献89

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部