期刊文献+

多孔钙磷玻璃陶瓷的制备及性能评价 被引量:5

Preparation and properties of porous calcium phosphate glass ceramics
暂未订购
导出
摘要  分别在500、680℃下烧结4h后制备二种多孔钙磷玻璃陶瓷,并评价了它们的降解性能和生物相容性.X射线衍射证实,500℃下烧结产物呈玻璃态;而680℃下烧结产物有晶体析出,其主晶相为β-Ca(PO3)2.扫描电镜观察了两者的形貌,发现后者比前者结构紧密,并测得两者孔径介于227~450μm.液体(水)静力称重法测定了两种多孔材料的吸水率(Wa)分别为31%和28%,显气孔率(Pa)为40%和37%,密度(ρb)为1 29和1 30g/cm3.分别将材料0 1000g浸泡于37℃50mL生理盐水中66h,发现浸泡液呈酸性,降解速度前者恒定,后者减少.血液相容性实验和细胞黏附实验表明前者生物相容性不佳,后者良好. In this paper, two kinds of porous calcium phosphate glass ceramics were sintered at 500℃ and 680℃ for 4 h respectives and degradation and biological compatibility properties were characterized. There are β-Ca(PO3)2 phases detected by X - ray diffraction in the latter glass ceramics (680℃ for 4h). Results of scanning electron microscopy show the latter glass ceramics is much more tightly than the former, and their apeaures are between 227 and 450μm. Results of weighing experiments show Water Absorption (Wa) of two samples is 31% and 28% ,and Apparent Porosity (Pa) is 40% and 36% ,and Bulk Density (Pb) is 1.29 and 1.31 g/cm^3, respectively. Results of the degradation demonstrate the former can degrade incessantly, but the degradation rate of the latter becomes smaller and smaller. The blood compatibility and cell compatibility experiments disclose the latter porous calcium metaphosphate glass ceramics have good biological compatibility.
出处 《暨南大学学报(自然科学与医学版)》 CAS CSCD 北大核心 2005年第3期364-368,共5页 Journal of Jinan University(Natural Science & Medicine Edition)
基金 广东省自然科学基金(021180)资助项目
关键词 玻璃陶瓷 降解 偏磷酸钙 多孔玻璃 glass ceramics degradation calcium metaphosphate porous glass
  • 相关文献

参考文献6

  • 1YOSHIO O, TOSHIHIRO K, YOSHIHIRO A, et al. Preparation and compressive strength behavior of porous ceramics with β- Ca(PO3)2[J]. Fiber Skeletons, 1997, 80(1): 225 - 231.
  • 2张淑霞,李建保,李惟,黄勇.用玻璃结晶化方法制备的偏磷酸钙晶须及其形貌[J].硅酸盐学报,1999,27(5):569-574. 被引量:4
  • 3LEE, Y M, SEOL Y J, LIM Y T, et al. Tissue- engineered growth of bone by marrow cell transplantation using porous calcium metaphosphate matrices[Jl. Journal of Biomedical Materials Research, 2001, 54(2) : 216 - 223.
  • 4KINGERYWD BOWERHK UHLMANNDR 陈皇钧译.陶瓷材料概论(上册)[M].台湾:晓园出版社,1988..
  • 5杨涵美,黄士忠,张玉峰,郭景坤,诸培南.增加TiO_2、Nb_2O_5晶核剂对烧结微晶玻璃结构与性能的影响[J].硅酸盐通报,1997,16(2):9-12. 被引量:2
  • 6LIU DEAN - MO. Influence of solid loading and particle size distribution on the porosity development of green alumina ceramic mouldings[J]. Ceramics International, 1997, 23: 135- 139.

二级参考文献5

共引文献4

同被引文献60

引证文献5

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部