摘要
进行了电刷镀技术在紫铜基体上刷镀Ni-Fe-W合金的工艺研究。结果表明,所用的合金镀液有较好的刷镀性能,镀层在回火时有明显的二次硬化现象,在400℃回火时最高硬度可达935H_、
The technological investigation of the brush plating Ni-Fe-W alloy solution on copper plates by the use of brush technology is introduced. The experimental results show that this solution has the better brush plating properties. The plated layer has an obvious secondary-harden phenomenon which occured at higher temperature. The layer gets the highest hardness 935HV_(0.05) alter tempering at 400℃.
出处
《大连铁道学院学报》
1993年第1期63-67,共5页
Journal of Dalian Railway Institute
