Thefield of energy storage devices is primarily dominated by lithium-ion batteries(LIBs)due to their mature manufacturing processes and stable performance.However,immature lithium recovery technology cannot stop the co...Thefield of energy storage devices is primarily dominated by lithium-ion batteries(LIBs)due to their mature manufacturing processes and stable performance.However,immature lithium recovery technology cannot stop the continuous increase in the cost of LIBs.Along with the rapid development of electric transportation,it has become inevitable to trigger a new round of competition in alternative energy storage systems.Some monovalent rechargeable metal ion batteries(sodium ion batteries(SIBs)and potassium ion batteries(PIBs),etc.)and multi-valent rechargeable metal-ion batteries(magnesium ion batteries(MIBs),calcium ion batteries(CIBs),zinc ion batteries(ZIBs),and aluminum ion batteries(AIBs),etc.)are potential candidates,which can replace LIBs in some of the scenarios to alleviate the pressure on supply.The cathode material plays a crucial role in determining the battery capacity.Transition metal compounds dominated by layered transition metal oxides as key cathode materials for secondary batteries play an important role in the advancement of various battery energy storage systems.In summary,this manuscript aims to review and summarize the research progress on transition metal compounds used as cathodes in different metal ion batteries,with the aim of providing valuable guidance for the exploration and design of high-performance integrated battery systems.展开更多
Magnonics and magnonic materials have attracted widespread interest in the spintronics community and demonstrate potential for applications in the next generation of information technology.Recent advances in manganite...Magnonics and magnonic materials have attracted widespread interest in the spintronics community and demonstrate potential for applications in the next generation of information technology.Recent advances in manganite thin films highlight their promise for magnonics,in which enhanced film quality and strain control of spin and electronic structures play a crucial role in reducing magnetic damping.Here,we report the fabrication of La_(0.67)Sr_(0.33)MnO_(3) thin films of varying quality via pulsed laser deposition.The quality of epitaxial films is characterized using atomic force microscopy and x-ray diffraction.A pronounced fourfold anisotropy in the magnetic damping(with a ratio of about 150%)is observed,where the minimum damping occurs along the[110]crystalline orientation.Notably,improved sample quality significantly reduces the magnetic damping at low temperatures.The highest-quality sample,featuring atomic-scale terraces,exhibits a magnetic damping of~2.5×10^(-3)at 5 K.Our results not only demonstrate effective reduction of low-temperature magnetic damping in high-quality correlated oxide systems but also provides a strategy and material platform for exploring novel quantum phenomena and for designing low-temperature magnonic devices.展开更多
Solar-blind deep-ultraviolet(DUV)photodetectors based on Ga_(2)O_(3)have attracted great attention due to their potential applications for many military and civil purposes.However,the development of device integration...Solar-blind deep-ultraviolet(DUV)photodetectors based on Ga_(2)O_(3)have attracted great attention due to their potential applications for many military and civil purposes.However,the development of device integration for optoelectronic system applications remains a huge challenge.Herein,we report a facile method for patterned-growth of high-qualityβ-Ga_(2)O_(3)thin films,which are assembled into a photodetectors array comprising 8×8 device units.A representative detector exhibits outstanding photoresponse performance,in terms of an ultra-low dark current of 0.62 pA,a large Ilight/Idark ratio exceeding 10^(4),a high responsivity of 0.72 A W^(-1) and a decent specific detectivity of 4.18×10^(11)Jones,upon 265 nm DUV illumination.What is more,the DUV/visible(250/400 nm)rejection ratio is as high as 10^(3) with a sharp response cut-off wave length at 280 nm.Further optoelectronic analysis reveals that the photodetectors array has good uniformity and repeatability,endowing it the capability to serve as a reliable DUV light image sensor with a decent spatial resolution.These results suggest that the proposed technique offers an effective avenue for patterned growth ofβ-Ga_(2)O_(3)thin films for multifunctional DUV optoelectronic applications.展开更多
Starch-nanoparticles were synthesized in water-in-oil microemusion at room temperature, and the starch-nanoparticles were coated with poly-L-lysine. The surface of the starch-nanoparticles was combined with fluorescen...Starch-nanoparticles were synthesized in water-in-oil microemusion at room temperature, and the starch-nanoparticles were coated with poly-L-lysine. The surface of the starch-nanoparticles was combined with fluorescence material Ru(bpy)32+·6H2O, and then the particles were characterized via transmission electron microscope. The fluorescence nanoparticles were conjugated with plasmid DNA to form complexes, and then treated with ultrasound and DNase I. pEGAD plasmid DNA-nanoparticle complexes were co-cultured with plant suspension cells of Dioscrea Zigiberensis G H Wright, and treated with ultrasound. The results show that the diameter of the fluorescence starch-nanoparticles is 50-100 nm. DNA-nanoparticle complexes can protect DNA from ultrasound damage as well as from DNase I cleavage. Mediated by ultrasound, pEGAD plasmid DNA-nanoparticle complexes can pierce into the cell wall, cell membrane and nucleus membrane of plant suspension cells. The green fluorescence protein(GFP) gene at a high frequency exceeds 5%. This nano-biomaterial can efficiently solve the problem that exterior genes cannot traverse the plant cell wall easily.展开更多
The microstructures and corrosion behaviors of the Al−6.5Si−0.45Mg casting alloys with the addition of Sc were investigated by using scanning electron microscopy,X-ray diffraction,electrochemical measurement technique...The microstructures and corrosion behaviors of the Al−6.5Si−0.45Mg casting alloys with the addition of Sc were investigated by using scanning electron microscopy,X-ray diffraction,electrochemical measurement techniques and immersion corrosion tests and compared with those of Sr-modified alloy.The results show that Sc has evident refining and modifying effects on the primaryα(Al)and the eutectic Si phase of the alloy,and the effects can be enhanced with the increase of Sc content.When the Sc content is increased to 0.58 wt.%,its modifying effect on the eutectic Si is almost same as that of Sr.Sc can improve the corrosion resistance of the test alloy in NaCl solution when compared with Sr,but the excessively high Sc content cannot further increase the corrosion resistance of the alloy.The corrosion of the alloys mainly occurs in the eutectic region of the alloy,and mostly the eutecticα(Al)is dissolved.This confirms that Si phase is more noble thanα(Al)phase,and the galvanic couplings can be formed between the eutectic Si andα(Al)phases.展开更多
Interface engineering has been regarded as an effective strategy to manipulate the thermoelectric performance of materials.Here,we use a facile chemical electroless plating and a spark plasma sintering process to fabr...Interface engineering has been regarded as an effective strategy to manipulate the thermoelectric performance of materials.Here,we use a facile chemical electroless plating and a spark plasma sintering process to fabricate Ag-plated SnTe bulk.After sintering,a small amount of plated Ag can be doped into SnTe to suppress the Sn vacancies and the others form Ag precipitates with a size distribution from nanoscale to microscale,which introduces Ag/SnTe interfaces to enhance the Seebeck coefficient via energy filtering effect.Simultaneously,these structures result in strong scattering to reach a low lattice thermal conductivity of-0.62 W·m^(–1)·K^(–1).Consequently,a maximum figure of merit(zT)of-0.67 at 823 K is achieved in 2 wt%Ag-plated SnTe,which is-60%higher than that of pristine SnTe.Moreover,the microhardness indentation test results show that the mean microhardness of 2 wt%Ag-plated SnTe is HV 64.26,which is much higher than that of pristine SnTe,indicating that Ag electroless plating can improve the mechanical properties of SnTe.This work has provided a facile and eco-friendly method to realize the interface engineering for manipulating the thermoelectric and mechanical properties of SnTe.展开更多
In this study,we have developed a high-sensitivity,near-infrared photodetector based on PdSe2/GaAs heterojunction,which was made by transferring a multilayered PdSe2 film onto a planar GaAs.The as-fabricated PdSe2/GaA...In this study,we have developed a high-sensitivity,near-infrared photodetector based on PdSe2/GaAs heterojunction,which was made by transferring a multilayered PdSe2 film onto a planar GaAs.The as-fabricated PdSe2/GaAs heterojunction device exhibited obvious photovoltaic behavior to 808 nm illumination,indicating that the near-infrared photodetector can be used as a self-driven device without external power supply.Further device analysis showed that the hybrid heterojunction exhibited a high on/off ratio of 1.16×10^5 measured at 808 nm under zero bias voltage.The responsivity and specific detectivity of photodetector were estimated to be 171.34 mA/W and 2.36×10^11 Jones,respectively.Moreover,the device showed excellent stability and reliable repeatability.After 2 months,the photoelectric characteristics of the near-infrared photodetector hardly degrade in air,attributable to the good stability of the PdSe2.Finally,the PdSe2/GaAs-based heterojunction device can also function as a near-infrared light sensor.展开更多
The Shanghai laser electron gamma source(SLEGS)is a powerful tool for exploring photonuclear physics,such as giant dipole resonance(GDR)and pygmy dipole resonance,which are the main mechanisms of collective nuclear mo...The Shanghai laser electron gamma source(SLEGS)is a powerful tool for exploring photonuclear physics,such as giant dipole resonance(GDR)and pygmy dipole resonance,which are the main mechanisms of collective nuclear motion.The goal of the SLEGS neutron time-of-flight(TOF)spectrometer is to measure GDR and specific nuclear structures in the energy region above the neutron threshold.The SLEGS TOF spectrometer was designed to hold 20 sets of EJ301 and LaBr3 detectors.Geant4 was used to simulate the efficiency of each detector and the entire spectrometer,which provides a reference for the selection of detectors and layout of the SLEGS TOF spectrometer.Under the events of 208Pb,implementations of coincidence and time-of-flight technology for complex experiments are available;thus,and neutron decay events can be separated.The performance of SLEGS TOF spectrometer was systematically evaluated using offline experiments,in which the time resolution reached approximately 0.9 ns.展开更多
The Al-3.40Mg-1.08Sc alloy plates were manufactured by selective laser melting(SLM) at platform temperatures of 35 ℃ and 200 ℃, respectively, and the corrosion performance of them was studied along height direction....The Al-3.40Mg-1.08Sc alloy plates were manufactured by selective laser melting(SLM) at platform temperatures of 35 ℃ and 200 ℃, respectively, and the corrosion performance of them was studied along height direction. The results show that the corrosion resistance of the alloy plate built at platform temperature of 35 ℃ along height direction is basically the same due to a uniform microstructure;While the corrosion resistance of the alloy plate built at platform temperature of 200 ℃ along height direction is different. The evolution of microstructure and the distribution of secondary phases are investigated, and the results show that the Cu-rich phases in alloy play a key role on corrosion performance. At higher platform temperature, the cooling rate is relative slow and a certain degree of in situ ageing leads to the significantly different distribution of Cu-rich phases along grain boundary. Specimens built at the platform temperature of 200 ℃ are inclined to locate at the crossed grain boundary, rather than continuous segregation of Cu-rich phases along grain boundary that is built at platform temperature of 35 ℃. Therefore, the corrosion resistance of Al-3.40Mg-1.08Sc alloy plate manufactured at platform temperature of 200 ℃ is higher, and presents a gradually decreasing trend along height direction.展开更多
Diamond crystals were synthesized with different doping proportions of N-H-O at 5.5 GPa-7.1 GPa and 1370℃-1450℃. With the increase in the N-H-O doping ratio, the crystal growth rate decreased, the temperature and pr...Diamond crystals were synthesized with different doping proportions of N-H-O at 5.5 GPa-7.1 GPa and 1370℃-1450℃. With the increase in the N-H-O doping ratio, the crystal growth rate decreased, the temperature and pressure conditions required for diamond nucleation became increasingly stringent, and the diamond crystallization process was affected. [111] became the dominant plane of diamonds;surface morphology became block-like;and growth texture,stacking faults, and etch pits increased. The diamond crystals had a two-dimensional growth habit. Increasing the doping concentration also increased the amount of N that entered the diamond crystals as confirmed via Fourier transform infrared spectroscopy. However, crystal quality gradually deteriorated as verified by the red-shifting of Raman peak positions and the widening of the Raman full width at half maximum. With the increase in the doping ratio, the photoluminescence property of the diamond crystals also drastically changed. The intensity of the N vacancy center of the diamond crystals changed, and several Ni-related defect centers, such as the NE1 and NE3 centers, appeared. Diamond synthesis in N-H-O-bearing fluid provides important information for deepening our understanding of the growth characteristics of diamonds in complex systems and the formation mechanism of natural diamonds, which are almost always N-rich and full of various defect centers. Meanwhile, this study proved that the type of defect centers in diamond crystals could be regulated by controlling the N-H-O impurity contents of the synthesis system.展开更多
A novel device, lateral PIN photodiode gated by transparent electrode （LPIN PD-GTE） fabricated on fully-depleted SOI film was proposed. ITO film was adopted in the device as gate electrode to reduce the light absorp...A novel device, lateral PIN photodiode gated by transparent electrode （LPIN PD-GTE） fabricated on fully-depleted SOI film was proposed. ITO film was adopted in the device as gate electrode to reduce the light absorption. Thin Si film was fully depleted under gate voltage to achieve low dark current and high photo4o-dark current ratio. The model of gate voltage was obtained and the numerical simulations were presented by ATLAS. Current-voltage characteristics of LPIN PD-GTE obtained in dark （dark current） and under 570 nm illumination （photo current） were studied to achieve the greatest photo-to-dark current ratio for active channel length from 2 to 12 /am. The results show that the photo-to-dark current ratio is 2.0×10^7, with dark current of around 5×10^-4 pA under VGK=0.6 V, PrN=5 mW/cm2, for a total area of 10μm×10μm in fully depleted SOI technology. Thus, the LPIN PD-GTE can be suitable for high-grade photoelectric systems such as blue DVD.展开更多
We have performed first principles calculations of Fe-doped BaTiO3 and SrTiO3. Dopant formation energy, structure distortion, band structure and density of states have been computed. The dopant formation energy is fou...We have performed first principles calculations of Fe-doped BaTiO3 and SrTiO3. Dopant formation energy, structure distortion, band structure and density of states have been computed. The dopant formation energy is found to be 6.8eV and 6.5eV for Fe-doped BaTiO3 and SrTiO3 respectively. The distances between Fe impurity and its nearest O atoms and between Fe atom and Ba or Sr atoms are smaller than those of the corresponding undoped bulk systems. The Fe defect energy band is obtained, which mainly originates from Fe 3d electrons. The band gap is still an indirect one after Fe doping for both BaTiO3 and SrWiO3, but the gap changes from Γ-R point to Γ-X point.展开更多
Electronic properties of the （001） surface of cubic BaZrO3 with BaO and ZrO2 terminations have been studied using first-principles calculations. Surface structure, partial density of states, band structure and surfa...Electronic properties of the （001） surface of cubic BaZrO3 with BaO and ZrO2 terminations have been studied using first-principles calculations. Surface structure, partial density of states, band structure and surface energy have been obtained. We find that the largest relaxation appears in the first layer of atoms, and the relaxation of the BaO-terminated surface is larger than that of the ZrO2-terminated surface. The surface rumpling of the BaO-terminated surface is also larger than that of the ZrO2-terminated surface. Results of surface energy calculations reveal that the BaZrO3 surface is likely to be more stable than the PbZrO3 surface.展开更多
The structure properties for even–even nuclei around^(230)U,located on the hexadecapoledeformation island,are investigated using the potential-energy-surface calculation within the framework of the macroscopic-micros...The structure properties for even–even nuclei around^(230)U,located on the hexadecapoledeformation island,are investigated using the potential-energy-surface calculation within the framework of the macroscopic-microscopic model.The impact of different deformation degrees of freedom(including axial and nonaxial quadrupole and hexadecapole deformations)on total energy,shell,and pairing contributions is analyzed,based on the projected energy maps and curves.The single-particle structure is presented and briefly discussed.To a large extent,a much better agreement with experimental data and other theoretical results is obtained if the hexadecapole deformations,especially the axial one,are taken into account.These results could provide useful insights into understanding the effects of different quadrupole and hexadecapole deformations.展开更多
The extremely high structural tolerance of ceria to oxygen vacancies(Ov)has made it a desirable catalytic material for the hydrocarbon oxidation to chemicals and pharmaceuticals and the reduction of gaseous pollutants...The extremely high structural tolerance of ceria to oxygen vacancies(Ov)has made it a desirable catalytic material for the hydrocarbon oxidation to chemicals and pharmaceuticals and the reduction of gaseous pollutants.It is proposed that the formation and diffusion of Ov originate from its outstanding reduction property.However,the formation and diffusion process of Ov over the surface of ceria at the atomic level is still unknown.Herein,the structural and valence evolution of CeO_(2)(111)surfaces in reductive,oxidative and vacuum environments from room temperature up to 700℃was studied with in situ aberration-corrected environmental transmission electron microscopy(ETEM)experiments.Ov is found to form under a high vacuum at elevated temperatures;however,the surface can recover to the initial state through the adsorption of oxygen atoms in an oxygen-contained environment.Furthermore,in hydrogen environment,the step-CeO_(2)(111)surface is not stable at elevated temperatures;thus,the steps tend to be eliminated with increasing temperature.Combined with first-principles density function calculations(DFT),it is proposed that O-terminated surfaces would develop in a hypoxic environment due to the dynamic diffusion of Ov from the outer surface to the subsurface.Furthermore,in a reductive environment,H2 facilitates the formation and diffusion of Ov while Ce-terminated surfaces develope.These results reveal dynamic atomic-scale interplay between the nanoceria surface and gas,thereby providing fundamental insights into the Ov-dependent reaction of nano-CeO_(2) during catalytic processes.展开更多
Substituting effects of Nd for La in La 0.5 Ba 0.5 CoO 3 compounds were studied systematically. The results show that Nd doping does not change the itinerant properties of the Co3d electrons. The molecular ma...Substituting effects of Nd for La in La 0.5 Ba 0.5 CoO 3 compounds were studied systematically. The results show that Nd doping does not change the itinerant properties of the Co3d electrons. The molecular magnetic moment of the materials decreases monotonically with increasing Nd dopant. When Nd content x ≥0.45, a magnetic phase separation appears in the materials. When x ≤0.45, the Curie temperature decreases monotonically with increasing Nd dopant. This is due to the size effects of the rare earth ions. The electric resistance measurements show that in the studied temperature range, the conduction of the materials belongs to the thermo diffusion conduction below the Curie temperature, while it belongs to the variable range hopping conduction of polarons over the Curie temperature.展开更多
The novel CuO-doped dense tin oxide varistor ceramics are investigated.The densification of tin oxide varistor ceramics could be greatly improved by doping copper oxide additives.The introduction of antimony additives...The novel CuO-doped dense tin oxide varistor ceramics are investigated.The densification of tin oxide varistor ceramics could be greatly improved by doping copper oxide additives.The introduction of antimony additives into a SnO2.CuO ceramic system would make it possess excellent nonlinearity.The sample doped with 0.05 mol%Sb203 possesses the highest nonlinearity coefficient(α=17.9)and the lowest leakage current density(JL=52μA cm^-2)among all the samples.A modified defect barrier model is introduced to explain the formation of the grainboundary barrier.The nonlinear behaviour of(Cu,Sb)-doped SnO2 varistor system could be explained by the barrier model.展开更多
Magnetic starch particles （MSPs） were synthesized in water-in-oil mieroemulsion at room temperature. MSPs were characterized by transmission electron microscopy （TEM）, Fourier transform infrared spectrometry （FTI...Magnetic starch particles （MSPs） were synthesized in water-in-oil mieroemulsion at room temperature. MSPs were characterized by transmission electron microscopy （TEM）, Fourier transform infrared spectrometry （FTIR）, zeta potential system, thermogravimetric analysis （TGA） and vibrating sample magnetometry （VSM）. The average diameter of the MSPs was 220 nm, dispersed with well-proportioned size and magnetic resonance, the saturation magnetization was 3.64 A.mR/kg. MSP was coated with poly-L-lysine （PLL）, and then the surface of PLL-MSP was combined with fluorescein isothiocynate （FITC）. Results show that fluorescent/magnetic starch particles （FMSPs） are of stable photo-bleaching capability compared with free FITC, with low bio-toxicity and certain function of magnetic separation. It is expected that FMSPs are bifimctional nano-materials including fluorescence labelling and magnetic separation.展开更多
Mass production of ZnO nanobelts and hexagonal nanorods has been successfully synthesized on CuO catalyzed porous silicon （PS） using a simple vapour-solid （VS） growth method. A comparison of their morphologies is ...Mass production of ZnO nanobelts and hexagonal nanorods has been successfully synthesized on CuO catalyzed porous silicon （PS） using a simple vapour-solid （VS） growth method. A comparison of their morphologies is investigated by scanning electron microscopy （SEM）. The transmission electron microscopy （TEM） confirms that ZnO nanobelts and nanorods are single crystalline with the growth direction of （0110） and （0001）, respectively. Field emission tests indicate that the ZnO nanostructures on porous silicon have low turn-on field of about 3.6 V/μm （at 1.0μA/cm^2） and the threshold field of about 8.3 V/μm （at 1.0mA/cm^2）, high emission site density （ESD） of approximately 104 cm^-2.展开更多
The two-dimensional(2 D) Ruddlesden–Popper-type perovskites, possessing tunable bandgap, narrow light emission,strong quantum confinement effect, as well as a simple preparation method, are identified as a new genera...The two-dimensional(2 D) Ruddlesden–Popper-type perovskites, possessing tunable bandgap, narrow light emission,strong quantum confinement effect, as well as a simple preparation method, are identified as a new generation of candidate materials for efficient light-emitting diodes. However, the preparation of high-quality quasi-2 D perovskite films is still a challenge currently, such as the severe mixing of phases and a high density of defects within the films, impeding the further promotion of device performance. Here, we prepared the quasi-2 D PEA_(2) MA_(n-1) Pbn Br_(3 n+1) perovskite films by a modified spin-coating method, and the phases with large bandgap were effectively suppressed by the vacuum evaporation treatment. We systematically investigated the optical properties and stability of the optimized films, and the photoluminescence(PL) quantum yield of the treated films was enhanced from 23% to 45%. We also studied the emission mechanisms by temperature-dependent PL spectra. Moreover, the stability of films against moisture, ultraviolet light, and heat was also greatly improved.展开更多
基金support from the Nuclear Fuel Pellet Appearance Quality Inspection Device Project(20190304 A).
文摘Thefield of energy storage devices is primarily dominated by lithium-ion batteries(LIBs)due to their mature manufacturing processes and stable performance.However,immature lithium recovery technology cannot stop the continuous increase in the cost of LIBs.Along with the rapid development of electric transportation,it has become inevitable to trigger a new round of competition in alternative energy storage systems.Some monovalent rechargeable metal ion batteries(sodium ion batteries(SIBs)and potassium ion batteries(PIBs),etc.)and multi-valent rechargeable metal-ion batteries(magnesium ion batteries(MIBs),calcium ion batteries(CIBs),zinc ion batteries(ZIBs),and aluminum ion batteries(AIBs),etc.)are potential candidates,which can replace LIBs in some of the scenarios to alleviate the pressure on supply.The cathode material plays a crucial role in determining the battery capacity.Transition metal compounds dominated by layered transition metal oxides as key cathode materials for secondary batteries play an important role in the advancement of various battery energy storage systems.In summary,this manuscript aims to review and summarize the research progress on transition metal compounds used as cathodes in different metal ion batteries,with the aim of providing valuable guidance for the exploration and design of high-performance integrated battery systems.
基金supported by the National Key Research and Development Program of China(Grant Nos.2023YFA1406500,J.Z.,2021YFA0718700,J.Z.)the National Natural Science Foundation of China(Grant Nos.T2350005,J.Z.,12404119,Y.Z.,52225205,J.Z.)+1 种基金the Beijing Natural Science Foundation(Grant No.Z240008,J.Z.)the Fundamental Research Funds for the Central Universities(Y.Z.and J.Z.)。
文摘Magnonics and magnonic materials have attracted widespread interest in the spintronics community and demonstrate potential for applications in the next generation of information technology.Recent advances in manganite thin films highlight their promise for magnonics,in which enhanced film quality and strain control of spin and electronic structures play a crucial role in reducing magnetic damping.Here,we report the fabrication of La_(0.67)Sr_(0.33)MnO_(3) thin films of varying quality via pulsed laser deposition.The quality of epitaxial films is characterized using atomic force microscopy and x-ray diffraction.A pronounced fourfold anisotropy in the magnetic damping(with a ratio of about 150%)is observed,where the minimum damping occurs along the[110]crystalline orientation.Notably,improved sample quality significantly reduces the magnetic damping at low temperatures.The highest-quality sample,featuring atomic-scale terraces,exhibits a magnetic damping of~2.5×10^(-3)at 5 K.Our results not only demonstrate effective reduction of low-temperature magnetic damping in high-quality correlated oxide systems but also provides a strategy and material platform for exploring novel quantum phenomena and for designing low-temperature magnonic devices.
基金supported by the National Natural Science Foundation of China(NSFC,Nos.51902078,62074048)the Fundamental Research Funds for the Central Universities(PA2020GDKC0014,JZ2020HGTB0051,JZ2018HGXC0001)the Anhui Provincial Natural Science Foundation(2008085MF205)。
文摘Solar-blind deep-ultraviolet(DUV)photodetectors based on Ga_(2)O_(3)have attracted great attention due to their potential applications for many military and civil purposes.However,the development of device integration for optoelectronic system applications remains a huge challenge.Herein,we report a facile method for patterned-growth of high-qualityβ-Ga_(2)O_(3)thin films,which are assembled into a photodetectors array comprising 8×8 device units.A representative detector exhibits outstanding photoresponse performance,in terms of an ultra-low dark current of 0.62 pA,a large Ilight/Idark ratio exceeding 10^(4),a high responsivity of 0.72 A W^(-1) and a decent specific detectivity of 4.18×10^(11)Jones,upon 265 nm DUV illumination.What is more,the DUV/visible(250/400 nm)rejection ratio is as high as 10^(3) with a sharp response cut-off wave length at 280 nm.Further optoelectronic analysis reveals that the photodetectors array has good uniformity and repeatability,endowing it the capability to serve as a reliable DUV light image sensor with a decent spatial resolution.These results suggest that the proposed technique offers an effective avenue for patterned growth ofβ-Ga_(2)O_(3)thin films for multifunctional DUV optoelectronic applications.
基金Project(200501) supported the "985" Program of China
文摘Starch-nanoparticles were synthesized in water-in-oil microemusion at room temperature, and the starch-nanoparticles were coated with poly-L-lysine. The surface of the starch-nanoparticles was combined with fluorescence material Ru(bpy)32+·6H2O, and then the particles were characterized via transmission electron microscope. The fluorescence nanoparticles were conjugated with plasmid DNA to form complexes, and then treated with ultrasound and DNase I. pEGAD plasmid DNA-nanoparticle complexes were co-cultured with plant suspension cells of Dioscrea Zigiberensis G H Wright, and treated with ultrasound. The results show that the diameter of the fluorescence starch-nanoparticles is 50-100 nm. DNA-nanoparticle complexes can protect DNA from ultrasound damage as well as from DNase I cleavage. Mediated by ultrasound, pEGAD plasmid DNA-nanoparticle complexes can pierce into the cell wall, cell membrane and nucleus membrane of plant suspension cells. The green fluorescence protein(GFP) gene at a high frequency exceeds 5%. This nano-biomaterial can efficiently solve the problem that exterior genes cannot traverse the plant cell wall easily.
文摘The microstructures and corrosion behaviors of the Al−6.5Si−0.45Mg casting alloys with the addition of Sc were investigated by using scanning electron microscopy,X-ray diffraction,electrochemical measurement techniques and immersion corrosion tests and compared with those of Sr-modified alloy.The results show that Sc has evident refining and modifying effects on the primaryα(Al)and the eutectic Si phase of the alloy,and the effects can be enhanced with the increase of Sc content.When the Sc content is increased to 0.58 wt.%,its modifying effect on the eutectic Si is almost same as that of Sr.Sc can improve the corrosion resistance of the test alloy in NaCl solution when compared with Sr,but the excessively high Sc content cannot further increase the corrosion resistance of the alloy.The corrosion of the alloys mainly occurs in the eutectic region of the alloy,and mostly the eutecticα(Al)is dissolved.This confirms that Si phase is more noble thanα(Al)phase,and the galvanic couplings can be formed between the eutectic Si andα(Al)phases.
基金This work was financially supported by the National Natural Science Foundation of China(No.51802205)Australian Research Council.
文摘Interface engineering has been regarded as an effective strategy to manipulate the thermoelectric performance of materials.Here,we use a facile chemical electroless plating and a spark plasma sintering process to fabricate Ag-plated SnTe bulk.After sintering,a small amount of plated Ag can be doped into SnTe to suppress the Sn vacancies and the others form Ag precipitates with a size distribution from nanoscale to microscale,which introduces Ag/SnTe interfaces to enhance the Seebeck coefficient via energy filtering effect.Simultaneously,these structures result in strong scattering to reach a low lattice thermal conductivity of-0.62 W·m^(–1)·K^(–1).Consequently,a maximum figure of merit(zT)of-0.67 at 823 K is achieved in 2 wt%Ag-plated SnTe,which is-60%higher than that of pristine SnTe.Moreover,the microhardness indentation test results show that the mean microhardness of 2 wt%Ag-plated SnTe is HV 64.26,which is much higher than that of pristine SnTe,indicating that Ag electroless plating can improve the mechanical properties of SnTe.This work has provided a facile and eco-friendly method to realize the interface engineering for manipulating the thermoelectric and mechanical properties of SnTe.
基金supported by the National Natural Science Foundation of China(No.61575059,No.61675062,No.21501038)the Fundamental Research Funds for the Central Universities(No.JZ2018HGPB0275,No.JZ2018HGTA0220,and No.JZ2018HGXC0001).
文摘In this study,we have developed a high-sensitivity,near-infrared photodetector based on PdSe2/GaAs heterojunction,which was made by transferring a multilayered PdSe2 film onto a planar GaAs.The as-fabricated PdSe2/GaAs heterojunction device exhibited obvious photovoltaic behavior to 808 nm illumination,indicating that the near-infrared photodetector can be used as a self-driven device without external power supply.Further device analysis showed that the hybrid heterojunction exhibited a high on/off ratio of 1.16×10^5 measured at 808 nm under zero bias voltage.The responsivity and specific detectivity of photodetector were estimated to be 171.34 mA/W and 2.36×10^11 Jones,respectively.Moreover,the device showed excellent stability and reliable repeatability.After 2 months,the photoelectric characteristics of the near-infrared photodetector hardly degrade in air,attributable to the good stability of the PdSe2.Finally,the PdSe2/GaAs-based heterojunction device can also function as a near-infrared light sensor.
基金supported by the National Natural Science Foundation of China (Nos.12275338,12005280,11905274 and 11875311)the Key Laboratory of Nuclear Data foundation (JCKY2022201C152)+1 种基金National key research and development program (No.2022YFA1602404)the Strategic Priority Research Program of the CAS (No.XDB34030000).
文摘The Shanghai laser electron gamma source(SLEGS)is a powerful tool for exploring photonuclear physics,such as giant dipole resonance(GDR)and pygmy dipole resonance,which are the main mechanisms of collective nuclear motion.The goal of the SLEGS neutron time-of-flight(TOF)spectrometer is to measure GDR and specific nuclear structures in the energy region above the neutron threshold.The SLEGS TOF spectrometer was designed to hold 20 sets of EJ301 and LaBr3 detectors.Geant4 was used to simulate the efficiency of each detector and the entire spectrometer,which provides a reference for the selection of detectors and layout of the SLEGS TOF spectrometer.Under the events of 208Pb,implementations of coincidence and time-of-flight technology for complex experiments are available;thus,and neutron decay events can be separated.The performance of SLEGS TOF spectrometer was systematically evaluated using offline experiments,in which the time resolution reached approximately 0.9 ns.
基金Project(51901207) supported by the National Natural Science Foundation of ChinaProject(2018M632796) supported by the China Postdoctoral Science FoundationProjects(19A430024, 21A430037) supported by the Plan of Henan Key Scientific Research Project of Universities,China。
文摘The Al-3.40Mg-1.08Sc alloy plates were manufactured by selective laser melting(SLM) at platform temperatures of 35 ℃ and 200 ℃, respectively, and the corrosion performance of them was studied along height direction. The results show that the corrosion resistance of the alloy plate built at platform temperature of 35 ℃ along height direction is basically the same due to a uniform microstructure;While the corrosion resistance of the alloy plate built at platform temperature of 200 ℃ along height direction is different. The evolution of microstructure and the distribution of secondary phases are investigated, and the results show that the Cu-rich phases in alloy play a key role on corrosion performance. At higher platform temperature, the cooling rate is relative slow and a certain degree of in situ ageing leads to the significantly different distribution of Cu-rich phases along grain boundary. Specimens built at the platform temperature of 200 ℃ are inclined to locate at the crossed grain boundary, rather than continuous segregation of Cu-rich phases along grain boundary that is built at platform temperature of 35 ℃. Therefore, the corrosion resistance of Al-3.40Mg-1.08Sc alloy plate manufactured at platform temperature of 200 ℃ is higher, and presents a gradually decreasing trend along height direction.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 51772120, 11604246, 51872112, and 11804305)the Project of Jilin Science and Technology Development Plan (Grant No. 20180201079GX)+1 种基金the Fundamental Research Funds for the Central Universities, the Natural Science Foundation of Chongqing, China (Grant No. cstc2019jcyj-msxm X0391)the Science and Technology Research Program of Chongqing Municipal Education Commission (Grant No. KJQN201901405)。
文摘Diamond crystals were synthesized with different doping proportions of N-H-O at 5.5 GPa-7.1 GPa and 1370℃-1450℃. With the increase in the N-H-O doping ratio, the crystal growth rate decreased, the temperature and pressure conditions required for diamond nucleation became increasingly stringent, and the diamond crystallization process was affected. [111] became the dominant plane of diamonds;surface morphology became block-like;and growth texture,stacking faults, and etch pits increased. The diamond crystals had a two-dimensional growth habit. Increasing the doping concentration also increased the amount of N that entered the diamond crystals as confirmed via Fourier transform infrared spectroscopy. However, crystal quality gradually deteriorated as verified by the red-shifting of Raman peak positions and the widening of the Raman full width at half maximum. With the increase in the doping ratio, the photoluminescence property of the diamond crystals also drastically changed. The intensity of the N vacancy center of the diamond crystals changed, and several Ni-related defect centers, such as the NE1 and NE3 centers, appeared. Diamond synthesis in N-H-O-bearing fluid provides important information for deepening our understanding of the growth characteristics of diamonds in complex systems and the formation mechanism of natural diamonds, which are almost always N-rich and full of various defect centers. Meanwhile, this study proved that the type of defect centers in diamond crystals could be regulated by controlling the N-H-O impurity contents of the synthesis system.
基金Project(61040061) supported by the National Natural Science Foundation of ChinaProject supported by Hunan Provincial Innovation Foundation for Postgraduate Students,China
文摘A novel device, lateral PIN photodiode gated by transparent electrode （LPIN PD-GTE） fabricated on fully-depleted SOI film was proposed. ITO film was adopted in the device as gate electrode to reduce the light absorption. Thin Si film was fully depleted under gate voltage to achieve low dark current and high photo4o-dark current ratio. The model of gate voltage was obtained and the numerical simulations were presented by ATLAS. Current-voltage characteristics of LPIN PD-GTE obtained in dark （dark current） and under 570 nm illumination （photo current） were studied to achieve the greatest photo-to-dark current ratio for active channel length from 2 to 12 /am. The results show that the photo-to-dark current ratio is 2.0×10^7, with dark current of around 5×10^-4 pA under VGK=0.6 V, PrN=5 mW/cm2, for a total area of 10μm×10μm in fully depleted SOI technology. Thus, the LPIN PD-GTE can be suitable for high-grade photoelectric systems such as blue DVD.
文摘We have performed first principles calculations of Fe-doped BaTiO3 and SrTiO3. Dopant formation energy, structure distortion, band structure and density of states have been computed. The dopant formation energy is found to be 6.8eV and 6.5eV for Fe-doped BaTiO3 and SrTiO3 respectively. The distances between Fe impurity and its nearest O atoms and between Fe atom and Ba or Sr atoms are smaller than those of the corresponding undoped bulk systems. The Fe defect energy band is obtained, which mainly originates from Fe 3d electrons. The band gap is still an indirect one after Fe doping for both BaTiO3 and SrWiO3, but the gap changes from Γ-R point to Γ-X point.
基金Project supported by the National Basic Research Program of China (Grant No 2007CB607504)the National Natural Science Foundation of China (Grant No 10474057)
文摘Electronic properties of the （001） surface of cubic BaZrO3 with BaO and ZrO2 terminations have been studied using first-principles calculations. Surface structure, partial density of states, band structure and surface energy have been obtained. We find that the largest relaxation appears in the first layer of atoms, and the relaxation of the BaO-terminated surface is larger than that of the ZrO2-terminated surface. The surface rumpling of the BaO-terminated surface is also larger than that of the ZrO2-terminated surface. Results of surface energy calculations reveal that the BaZrO3 surface is likely to be more stable than the PbZrO3 surface.
基金the National Natural Science Foundation of China(No.11975209,No.U2032211,and No.12075287)the Physics Research and Development Program of Zhengzhou University(No.32410017)the Project of Youth Backbone Teachers of Colleges and Universities of Henan Province(No.2017GGJS008)
文摘The structure properties for even–even nuclei around^(230)U,located on the hexadecapoledeformation island,are investigated using the potential-energy-surface calculation within the framework of the macroscopic-microscopic model.The impact of different deformation degrees of freedom(including axial and nonaxial quadrupole and hexadecapole deformations)on total energy,shell,and pairing contributions is analyzed,based on the projected energy maps and curves.The single-particle structure is presented and briefly discussed.To a large extent,a much better agreement with experimental data and other theoretical results is obtained if the hexadecapole deformations,especially the axial one,are taken into account.These results could provide useful insights into understanding the effects of different quadrupole and hexadecapole deformations.
基金Project supported by the National Key Research and Development Plan(2021YFA1200201)the Natural Science Foundation of China(51872008)+1 种基金the"111"Project under the DB18015 grantBeijing Outstanding Young Scientists Projects(BJJWZYJH01201910005018)。
文摘The extremely high structural tolerance of ceria to oxygen vacancies(Ov)has made it a desirable catalytic material for the hydrocarbon oxidation to chemicals and pharmaceuticals and the reduction of gaseous pollutants.It is proposed that the formation and diffusion of Ov originate from its outstanding reduction property.However,the formation and diffusion process of Ov over the surface of ceria at the atomic level is still unknown.Herein,the structural and valence evolution of CeO_(2)(111)surfaces in reductive,oxidative and vacuum environments from room temperature up to 700℃was studied with in situ aberration-corrected environmental transmission electron microscopy(ETEM)experiments.Ov is found to form under a high vacuum at elevated temperatures;however,the surface can recover to the initial state through the adsorption of oxygen atoms in an oxygen-contained environment.Furthermore,in hydrogen environment,the step-CeO_(2)(111)surface is not stable at elevated temperatures;thus,the steps tend to be eliminated with increasing temperature.Combined with first-principles density function calculations(DFT),it is proposed that O-terminated surfaces would develop in a hypoxic environment due to the dynamic diffusion of Ov from the outer surface to the subsurface.Furthermore,in a reductive environment,H2 facilitates the formation and diffusion of Ov while Ce-terminated surfaces develope.These results reveal dynamic atomic-scale interplay between the nanoceria surface and gas,thereby providing fundamental insights into the Ov-dependent reaction of nano-CeO_(2) during catalytic processes.
文摘Substituting effects of Nd for La in La 0.5 Ba 0.5 CoO 3 compounds were studied systematically. The results show that Nd doping does not change the itinerant properties of the Co3d electrons. The molecular magnetic moment of the materials decreases monotonically with increasing Nd dopant. When Nd content x ≥0.45, a magnetic phase separation appears in the materials. When x ≤0.45, the Curie temperature decreases monotonically with increasing Nd dopant. This is due to the size effects of the rare earth ions. The electric resistance measurements show that in the studied temperature range, the conduction of the materials belongs to the thermo diffusion conduction below the Curie temperature, while it belongs to the variable range hopping conduction of polarons over the Curie temperature.
基金Supported by the National Natural Science Foundation of China under Grant No 50572056the Natural Science Foundation of Shandong Province of China under Grant No Z2003F04.
文摘The novel CuO-doped dense tin oxide varistor ceramics are investigated.The densification of tin oxide varistor ceramics could be greatly improved by doping copper oxide additives.The introduction of antimony additives into a SnO2.CuO ceramic system would make it possess excellent nonlinearity.The sample doped with 0.05 mol%Sb203 possesses the highest nonlinearity coefficient(α=17.9)and the lowest leakage current density(JL=52μA cm^-2)among all the samples.A modified defect barrier model is introduced to explain the formation of the grainboundary barrier.The nonlinear behaviour of(Cu,Sb)-doped SnO2 varistor system could be explained by the barrier model.
基金Project(200501) supported by the "985" Program of China
文摘Magnetic starch particles （MSPs） were synthesized in water-in-oil mieroemulsion at room temperature. MSPs were characterized by transmission electron microscopy （TEM）, Fourier transform infrared spectrometry （FTIR）, zeta potential system, thermogravimetric analysis （TGA） and vibrating sample magnetometry （VSM）. The average diameter of the MSPs was 220 nm, dispersed with well-proportioned size and magnetic resonance, the saturation magnetization was 3.64 A.mR/kg. MSP was coated with poly-L-lysine （PLL）, and then the surface of PLL-MSP was combined with fluorescein isothiocynate （FITC）. Results show that fluorescent/magnetic starch particles （FMSPs） are of stable photo-bleaching capability compared with free FITC, with low bio-toxicity and certain function of magnetic separation. It is expected that FMSPs are bifimctional nano-materials including fluorescence labelling and magnetic separation.
基金Supported by the National Natural Science Foundation of China under Grant No 60476004, the Foundation of State Key Laboratory of Advanced Technology for Materials Synthesis and Processing of Wuhan University of Technology under Grant No WUT2004 Z01, and GS of ECNU （No ECNU 2005）.
文摘Mass production of ZnO nanobelts and hexagonal nanorods has been successfully synthesized on CuO catalyzed porous silicon （PS） using a simple vapour-solid （VS） growth method. A comparison of their morphologies is investigated by scanning electron microscopy （SEM）. The transmission electron microscopy （TEM） confirms that ZnO nanobelts and nanorods are single crystalline with the growth direction of （0110） and （0001）, respectively. Field emission tests indicate that the ZnO nanostructures on porous silicon have low turn-on field of about 3.6 V/μm （at 1.0μA/cm^2） and the threshold field of about 8.3 V/μm （at 1.0mA/cm^2）, high emission site density （ESD） of approximately 104 cm^-2.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11774318, 12074347, 12004346, and 61935009)the Open Fund of State Key Laboratory of Integrated Optoelectronics (Grant No. IOSKL2020KF04)。
文摘The two-dimensional(2 D) Ruddlesden–Popper-type perovskites, possessing tunable bandgap, narrow light emission,strong quantum confinement effect, as well as a simple preparation method, are identified as a new generation of candidate materials for efficient light-emitting diodes. However, the preparation of high-quality quasi-2 D perovskite films is still a challenge currently, such as the severe mixing of phases and a high density of defects within the films, impeding the further promotion of device performance. Here, we prepared the quasi-2 D PEA_(2) MA_(n-1) Pbn Br_(3 n+1) perovskite films by a modified spin-coating method, and the phases with large bandgap were effectively suppressed by the vacuum evaporation treatment. We systematically investigated the optical properties and stability of the optimized films, and the photoluminescence(PL) quantum yield of the treated films was enhanced from 23% to 45%. We also studied the emission mechanisms by temperature-dependent PL spectra. Moreover, the stability of films against moisture, ultraviolet light, and heat was also greatly improved.
