In this study,we developed a single-beam optical trap-based surface-enhanced Raman scattering(SERS)optofluidic molecular fingerprint spectroscopy detection system.This system utilizes a single-beam optical trap to con...In this study,we developed a single-beam optical trap-based surface-enhanced Raman scattering(SERS)optofluidic molecular fingerprint spectroscopy detection system.This system utilizes a single-beam optical trap to concentrate free silver nanoparticles(AgNPs)within an optofluidic chip,significantly enhancing SERS performance.We investigated the optical field distribution characteristics within the tapered fiber using COMSOL simulation software and established a MATLAB simulation model to validate the single-beam optical trap's effectiveness in capturing AgNPs,demonstrating the theoretical feasibility of our approach.To verify the particle capture efficacy of the system,we experimentally controlled the optical trap's on-off state to manage the capture and release of particles precisely.The experimental results indicated that the Raman signal intensity in the capture state was significantly higher than in the non-capture state,confirming that the single-beam optical trap effectively enhances the SERS detection capability of the optofluidic detection system.Furthermore,we employed Raman mapping techniques to investigate the impact of the capture area on the SERS effect,revealing that the spectral intensity of molecular fingerprints in the laser-trapping region is significantly improved.We successfully detected the Raman spectrum of crystal violet at a concentration of 10^(−9)mol/L and pesticide thiram at a concentration of 10^(−5)mol/L,further demonstrating the ability of the single-beam optical trap in enhancing the molecular fingerprint spectrum identification capability of the SERS optofluidic chips.The optical trapping SERS optofluidic detection system developed in this study,as a key component of an integrated optoelectronic sensing system,holds the potential for integration with portable high-power lasers and high-performance Raman spectrometers.This integration is expected to advance highly integrated technologies and significantly enhance the overall performance and portability of optoelectronic sensing systems.展开更多
The dynamic avalanche effect is a critical factor influencing the performance and reliability of the field-stop insulated gate bipolar transistors(FS-IGBT).Unclamped inductive switching(UIS)is the primary method for t...The dynamic avalanche effect is a critical factor influencing the performance and reliability of the field-stop insulated gate bipolar transistors(FS-IGBT).Unclamped inductive switching(UIS)is the primary method for testing the dynamic avalanche capability of FS-IGBTs.Numerous studies have demonstrated that factors such as device structure,avalanche-generating current filaments,and electrical parameters influence the dynamic avalanche effect of the FS-IGBT.However,few studies have focused on enhancing the avalanche reliability of the FS-IGBT by adjusting circuit parameters during operation.In this paper,the dynamic avalanche effect of the FS-IGBT under UIS conditions is comprehensively investigated through a series of comparative experiments with varying circuit parameters,including bus voltage V_(DC),gate voltage V_(G),gate resistance R_(g),load inductance L,and temperature TC.Furthermore,a method to enhance the dynamic avalanche reliability of the FS-IGBT under UIS by optimizing circuit parameters is proposed.In practical applications,reducing gate voltage,increasing load inductance,and lowering temperature can effectively improve the dynamic avalanche capability of the FS-IGBT.展开更多
The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show...The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show clinical potential,their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity(R^(2)>0.99 up to 1 MPa)in conventional designs.Inspired by the tactile sensing mechanism of human skin,where dermal stratification enables wide-range pressure adaptation and ion-channelregulated signaling maintains linear electrical responses,we developed a dual-mechanism flexible iontronic pressure sensor(FIPS).This innovative design synergistically combines two bioinspired components:interdigitated fabric microstructures enabling pressure-proportional contact area expansion(αP1/3)and iontronic film facilitating self-adaptive ion concentration modulation(αP^(2/3)),which together generate a linear capacitance-pressure response(CαP).The FIPS achieves breakthrough performance:242 kPa^(-1)sensitivity with 0.997linearity across 0-1 MPa,yielding a record linear sensing factor(LSF=242,000).The design is validated across various substrates and ionic materials,demonstrating its versatility.Finally,the FIPS-driven design enables a smart insole demonstrating 1.8%error in tibial load assessment during gait analysis,outperforming nonlinear counterparts(6.5%error)in early fracture-risk prediction.The biomimetic design framework establishes a universal approach for developing high-performance linear sensors,establishing generalized principles for medical-grade wearable devices.展开更多
Bulk and interface carrier nonradiative recombination losses impede the further improvement of power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs).It is highly necessary to develop multifunct...Bulk and interface carrier nonradiative recombination losses impede the further improvement of power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs).It is highly necessary to develop multifunctional strategy to minimize surface and interface nonradiative recombination losses.Herein,we report a bulk and interface defect passivation strategy via the synergistic effect of anions and cations,where multifunctional potassium sulphate(K_(2)SO_(4))is incorporated at SnO_(2)/perovskite interface.We find that K^(+)ions in K_(2)SO_(4)diffuse into perovskite layer and suppress the formation of bulk defects in perovskite films,and the SO_(4)^(2-)ions remain located at interface via the strong chemical interaction with SnO_(2)layer and perovskite layer,respectively.Through this synergistic modification strategy,effective defect passivation and improved energy band alignment are achieved simultaneously.These beneficial effects are translated into an efficiency increase from 19.45%to 21.18%with a low voltage deficit of0.53 V mainly as a result of boosted open-circuit voltage(V_(oc))after K_(2)SO_(4)modification.In addition,the K_(2)SO_(4)modification contributes to ameliorated stability.The present work provides a route to minimize bulk and interface nonradiative recombination losses for the simultaneous realization of PCE and stability enhancement by rational anion and cation synergistic engineering.展开更多
Solution-processed oxide semiconductors have been considered as a potential alternative to vacuum-based ones in printable electronics.However,despite spincoated InZnO(IZO)thin-film transistors(TFTs)have shown a relati...Solution-processed oxide semiconductors have been considered as a potential alternative to vacuum-based ones in printable electronics.However,despite spincoated InZnO(IZO)thin-film transistors(TFTs)have shown a relatively high mobil-ity,the lack of carrier suppressor and the high sensitivity to oxygen and water molecules in ambient air make them potentially suffer issues of poor stability.In this work,Al is used as the third cation doping element to study the effects on the electrical,optoelectronic,and physical properties of IZO TFTs.A hydrophobic self-assembled monolayer called octadecyltrimethoxysilane is introduced as the surface passivation layer,aiming to reduce the effects from air and understand the importance of top surface conditions in solution-processed,ultra-thin oxide TFTs.Owing to the reduced trap states within the film and at the top surface enabled by the doping and passivation,the optimized TFTs show an increased current on/off ratio,a reduced drain current hysteresis,and a significantly enhanced bias stress stability,compared with the untreated ones.By combining with high-capacitance AlO_(x),TFTs with a low operating voltage of 1.5 V,a current on/off ratio of>10^(4) and a mobility of 4.6 cm^(2)/(V·s)are demonstrated,suggesting the promising features for future low-cost,low-power electronics.展开更多
A two-dimensional(2D)surface-enhanced Raman scattering(SERS)substrate is fabricated by decorating carbon nanotube(CNT)films with Ag nanoparticles(Ag NPs)in different sizes,via simple and low-cost chemical reduction me...A two-dimensional(2D)surface-enhanced Raman scattering(SERS)substrate is fabricated by decorating carbon nanotube(CNT)films with Ag nanoparticles(Ag NPs)in different sizes,via simple and low-cost chemical reduction method and self-assembling method.The change of Raman and SERS activity of carbon nanotubes/Ag nanoparticles(CNTs/Ag NPs)composites with varying size of Ag NPs are investigated by using rhodamine 6G(R6G)as a probe molecule.Meanwhile,the scattering cross section of Ag NPs and the distribution of electric field of CNTs/Ag NPs composite are simulated through finite difference time domain(FDTD)method.Surface plasmon resonance(SPR)wavelength is redshifted as the size of Ag NPs increases,and the intensity of SERS and electric field increase with Ag NPs size increasing.The experiment and simulation results show a Raman scattering enhancement factor(EF)of 108for the hybrid substrate.展开更多
Thin-film transistors(TFTs)based on oxide semiconductors have gained a lot of attention in applications such as displays and sensors particularly in recent years due to the advantages of oxide semiconductors like high...Thin-film transistors(TFTs)based on oxide semiconductors have gained a lot of attention in applications such as displays and sensors particularly in recent years due to the advantages of oxide semiconductors like high mobility,good uniformity over large area and low deposition temperature[1−4].However,the defects/traps at dielectric/channel interface and top surface of oxide TFTs might dramatically degrade device performance including current on/off ratio,mobility and most importantly stability[5,6],making it quite urgent to systematically make effective interface engineering to improve TFT performance.展开更多
Metal halide perovskites(MHP)are potential candidates for the photocatalytic reduction of CO_(2)due to their long photogenerated carrier lifetime and charge diffusion length.However,the conventional long-chain ligand ...Metal halide perovskites(MHP)are potential candidates for the photocatalytic reduction of CO_(2)due to their long photogenerated carrier lifetime and charge diffusion length.However,the conventional long-chain ligand impedes the adsorption and activation of CO_(2)molecules in practical applications.Here,a ligand modulation technology is employed to enhance the photocatalytic CO_(2)reduction activity of lead-free Cs_(2)AgInCl_(6)microcrystals(MCs).The Cs_(2)AgInCl_(6)MCs passivated by Oleic acid(OLA)and Octanoic acid(OCA)are used for photocatalytic CO_(2)reduction.The results show that the surface defects and electronic properties of Cs_(2)AgInCl_(6)MCs can be adjusted through ligand modulation.Compared with the OLA-Cs_(2)AgInCl_(6),the OCA-Cs_(2)AgInCl_(6)catalyst demonstrated a significant improvement in the catalytic yield of CO and CH_(4).The CO and CH_(4)catalytic yields of OCA-Cs_(2)AgInCl_(6)reached 171.88 and34.15μmol g^(-1)h^(-1)which were 2.03 and 12.98 times higher than those of OLA-Cs_(2)AgInCl_(6),and the total electron consumption rate of OCA-Cs_(2)AgInCl_(6)was 615.2μmol g^(-1)h^(-1)which was 3.25 times higher than that of OLA-Cs_(2)AgInCl_(6).Furthermore,in situ diffuse reflectance infrared Fourier transform spectra revealed the enhancement of photocatalytic activity in Cs_(2)AgInCl_(6)MCs induced by ligand modulation.This study illustrates the potential of lead-free Cs_(2)AgInCl_(6)MCs for efficient photocatalytic CO_(2)reduction and provides a ligand modulation strategy for the active promotion of MHP photocatalysts.展开更多
Triboelectric nanogenerators(TENG),renowned for their remarkable capability to harness weak mechanical energy from the environment,have gained considerable attention owing to their cost-effectiveness,high output,and a...Triboelectric nanogenerators(TENG),renowned for their remarkable capability to harness weak mechanical energy from the environment,have gained considerable attention owing to their cost-effectiveness,high output,and adaptability.This review provides a unique perspective by conducting a comprehensive and in-depth analysis of magnetically assisted TENGs that encompass structures,materials,and self-powered sensing systems.We systematically summarize the diverse functions of the magnetic assistance for TENGs,including system stiffness,components of the hybrid electromagnetic-triboelectric generator,transmission,and interaction forces.In the material domain,we review the incorporation of magnetic nano-composites materials,along with ferrofluid-based TENG and microstructure verification,which have also been summarized based on existing research.Furthermore,we delve into the research progress on physical quantity sensing and human-machine interface in magnetic-assisted TENGs.Our analysis highlights that magnetic assistance extends beyond the repulsive and suction forces under a magnetic field,thereby playing multifaceted roles in improving the output performance and environmental adaptability of the TENGs.Finally,we present the prevailing challenges and offer insights into the future trajectory of the magnetic-assisted TENGs development.展开更多
Frequency-swept interferometry(FSI) is a well-known ranging technique, but it suffers from three problems, namely, the Doppler effect, the frequency-sweep nonlinearity, as well as the slow frequency-sweep rate. The fi...Frequency-swept interferometry(FSI) is a well-known ranging technique, but it suffers from three problems, namely, the Doppler effect, the frequency-sweep nonlinearity, as well as the slow frequency-sweep rate. The first two problems hinder the measurement accuracy, while the third problem limits the measurement rate. In this paper, we present a dynamic FSI(DFSI) that solves these three fundamental problems simultaneously. The DFSI consists of two auxiliary interferometers(AU1 and AU2) and two measurement interferometers(FSI and frequency-fixed interferometry(FFI)). We use FSI to obtain the Doppler and nonlinearity affected ranging signal, AU1 to monitor the frequency-tuning nonlinearity in the frequency-swept laser(FSL), and FFI and AU2 to constitute a laser vibrometer for monitoring the target motion-induced Doppler effect. Then, a novel signal fusion processing technique is applied to reconstruct the real dynamic distance from the above-measured signals. The dynamic ranging error caused by the Doppler effect and frequency-sweep nonlinearity in FSI can be eliminated and the dynamic distance at each sampling point can be obtained. The validity of this method is demonstrated by numerical experiments.展开更多
Perovskite solar cells(PSCs)are taking a leading position in thin-film optoelectronic devices due to their excellent optical,physical and electrical properties[1-4].Nevertheless,the stability issue of metal halide per...Perovskite solar cells(PSCs)are taking a leading position in thin-film optoelectronic devices due to their excellent optical,physical and electrical properties[1-4].Nevertheless,the stability issue of metal halide perovskite precursor solution severely retards the future industrialization of PSCs[5-7].In stoichiometry,slight solution composition change will induce severe degradation of device performance.展开更多
Low-dimensional lead-free metal halides have emerged as promising candidates for anti-counterfeiting applications,characterized by their low toxicity,diverse crystal structures,and exceptional optical properties.Conve...Low-dimensional lead-free metal halides have emerged as promising candidates for anti-counterfeiting applications,characterized by their low toxicity,diverse crystal structures,and exceptional optical properties.Conventional anti-counterfeiting technologies based on low-dimensional metal halides are often constrained by complex and time-consuming heating and solvent treatments that may insufficiently modify the luminescent characteristics of emitters,thus hindering their practical implementation in effective anti-counterfeiting strategies.In this study,we employ an innovative alloying strategy in low-dimensional zinc halides Cs_(2)ZnCl_(4) to enhance their luminescent performance.By introducing self-trapped exciton(STE)states through the alloying of Cu^(+)and Sb^(3+)ions in Cs_(2)ZnCl_(4),we achieve bright blue and red photoluminescence(PL)centered at 492 nm and 744 nm,respectively,under 266 nm excitation,with only red emission observed under 365 nm excitation.This approach enables instant and reliable anti-counterfeiting applications.This work presents new opportunities for developing robust anti-counterfeiting and information encryption/decryption technologies.展开更多
A multi-wavelength and transversely mode-switchable fiber laser based on a ring-core fiber Bragg grating(RCFBG) is proposed. Two RCFBGs with high and low reflectivity are inscribed using a femtosecond laser and the ph...A multi-wavelength and transversely mode-switchable fiber laser based on a ring-core fiber Bragg grating(RCFBG) is proposed. Two RCFBGs with high and low reflectivity are inscribed using a femtosecond laser and the phase mask scanning technique, serving as the mirrors in an all-fiber laser linear resonator. Leveraging the polarization dependence of the RCFBG through side exposure, we can readily achieve switchable single-wavelength, dual-wavelength, or triple-wavelength laser outputs by adjusting the polarization controller(PC) inside the resonator. Additionally, three distinct modes, namely, cylindrical vector beam(CVB), fundamental and mixed modes, are successfully obtained in single-wavelength laser operation.Azimuthally or radially polarized lasers can be realized by tuning two PCs inside and outside the resonator while operating in CVB mode. This innovative multi-wavelength and transversely mode-switchable fiber laser based on RCFBGs holds significant potential for applications in wavelength division multiplexing and mode division multiplexing systems.展开更多
Electronic skin has showcased superior sensing capabilities inspired from human skin.However,most preceding studies focused on the dermis of the skin rather than the epidermis.In particular,the pseudo-porous structura...Electronic skin has showcased superior sensing capabilities inspired from human skin.However,most preceding studies focused on the dermis of the skin rather than the epidermis.In particular,the pseudo-porous structural domain of the epidermis increases the skin's tolerance while ensuring its susceptibility to touch.Yet,most endeavors on the porous structures failed to replicate the superior sensing performance of skin-like counterparts in terms of sensitivity and/or detection range.Stimulated by the strategy that the epidermis of the skin absorbs energy while producing ionic conduction to the nerves,this work initiatively introduced an easy-to-produce,and low-cost pressure sensor based on ionic-gel foam,and achieved a high sensitivity(2893 kPa^(-1))within a wide pressure range(up to~1 MPa),which ranked among the best cases thus far.Moreover,the factors affecting the sensor performance were explored while the sensing principles were enriched.Inspiringly,the plantar pressure measurement by harnessing the as-prepared sensor unveiled an ultra-broad detection range(100 Pa-1 MPa),thus delivering a huge application potential in the field of robot and health monitoring.展开更多
All-inorganic CsPbBr_(3) perovskite quantum dots(QDs)have received great attention in white light emission because of their outstanding properties.However,their practical application is hindered by poor stability.Here...All-inorganic CsPbBr_(3) perovskite quantum dots(QDs)have received great attention in white light emission because of their outstanding properties.However,their practical application is hindered by poor stability.Herein,we propose a simple strategy to synthesize excellent stability and efficient emission of CsPbBr_(3) QDs by using 2-hexyldecanoic acid(DA)as a ligand to replace the regular oleic acid(OA)ligand.Thanks to the strong binding energy between DA ligand and QDs,the modified QDs not only show a high photoluminescence quantum yield(PLQY)of 96%but also exhibit high stability against ethanol and water.Thereby warm white light-emitting diodes(WLEDs)are constructed by combining lig-and modified CsPbBr_(3) QDs with red AgInZnS QDs on blue emitting InGaN chips,exhibiting a color rendering index of 93,a power efficiency of 64.8 lm/W,a CIE coordinate of(0.44,0.42)and correlated color temperature value of 3018 K.In ad-dition,WLEDs based on ligand modified CsPbBr_(3) QDs also exhibit better thermal performance than that of WLEDs based on the regular CsPbBr_(3) QDs.The combination of improved efficiency and better thermal stability with high color quality indicates that the modified CsPbBr_(3) QDs are ideal for WLEDs application.展开更多
Colloidal semiconductor nanocrystals have been proven to be promising candidates for applications in low‐cost and high‐performance photovoltaics,bioimaging,and photocatalysis due to their novel size‐and shape‐depe...Colloidal semiconductor nanocrystals have been proven to be promising candidates for applications in low‐cost and high‐performance photovoltaics,bioimaging,and photocatalysis due to their novel size‐and shape‐dependent properties.Among the colloidal systems,I‐III‐VI semiconductor nanocrystals(NCs)have drawn much attention in the past few decades.Compared to binary NCs,ternary I‐III‐VI NCs not only exhibit low toxicity,but also a high performance similar to that of binary NCs.In this review,we mainly focus on the synthesis,properties,and applications of I‐III‐VI NCs.We summarize the major synthesis methods,analyze their photophysical and electronic properties,and highlight some of the latest applications of I‐III‐VI NCs in solar cells,light‐emitting diodes,bioimaging,and photocatalysis.Finally,based on the information reviewed,we highlight the existing problems and challenges.展开更多
The defects from electron transport layer,perovskite layer and their interface would result in carrier nonradiative recombination losses.Poor buried interfacial contact is detrimental to charge extraction and device s...The defects from electron transport layer,perovskite layer and their interface would result in carrier nonradiative recombination losses.Poor buried interfacial contact is detrimental to charge extraction and device stability.Here,we report a bottom-up holistic carrier management strategy induced synergistically by multiple chemical bonds to minimize bulk and interfacial energy losses for high-performance perovskite photovoltaics.4-trifluoromethyl-benzamidine hydrochloride(TBHCl)containing–CF_(3),amidine cation and Cl^(-)is in advance incorporated into SnO_(2)colloid solution to realize bottom-up modification.The synergistic effect of multiple functional groups and multiple-bond-induced chemical interaction are revealed theoretically and experimentally.F and Cl^(-)can passivate oxygen vacancy and/or undercoordinated Sn^(4+)defects by coordinating with Sn^(4+).The F can suppress cation migration and modulate crystallization via hydrogen bond with FA^(+),and can passivate lead defects by coordinating with Pb^(2+).The–NH_(2)–C=NH^(+)_(2)and Cl^(-)can passivate cation and anion vacancy defects through ionic bonds with perovskites,respectively.Through TBHCl modification,the suppression of agglomeration of SnO_(2)nanoparticles,bulk and interfacial defect passivation,and release of tensile strains of perovskite films are demonstrated,which resulted in a PCE enhancement from 21.28%to 23.40%and improved stability.With post-treatment,the efficiency is further improved to 23.63%.展开更多
All-inorganic lead-free palladium(Pd)halogen perovskites with prominent optoelectronic properties provide admirable potential for selective photo-and electroreduction of CO_(2).But it remains unachieved for effectivel...All-inorganic lead-free palladium(Pd)halogen perovskites with prominent optoelectronic properties provide admirable potential for selective photo-and electroreduction of CO_(2).But it remains unachieved for effectively converting the CO_(2)to CO with high selectivity on Pd-based perovskites driven by solar light or electricity.Herein,high-quality Cs_(2)PdBr_(6)microcrystals and nanocrystals were synthesized through a facile antisolvent method.Among all the reported pure-phase perovskites,the Cs_(2)PdBr_(6)nanocrystals synthesized at 50℃performed the highest effectiveness on CO_(2)to CO conversion generating 73.8μmol g^(-1)of CO yield with 100%selectivity under visible light illumination(λ>420 nm)for 3 h.Meanwhile,for the first time,we report a new application of lead-free perovskites,in which they are applied to electrocatalysis of CO_(2)reduction reaction.Noticeably,they showed significant electrocatalytic activity(Faradaic yield:78%for CO)and operation stability(10 h).And the surface reaction intermediates were dynamically monitored and precisely unraveled according to the in situ diffuse reflectance infrared Fourier transform spectra investigation.In combination with the density functional theory calculation,the reaction mechanism and pathways were revealed.This work not only provides significant strategies to enhance the photocatalytic performance of perovskites,but also shows excellent potential for their application in electrocatalysis.展开更多
Inverted perovskite solar cells(PSCs)have attracted interest due to their simple fabrication,long-term stability,and small hysteresis[1-3].It is noteworthy that the quality of the hole-transport layer(HTL)largely dete...Inverted perovskite solar cells(PSCs)have attracted interest due to their simple fabrication,long-term stability,and small hysteresis[1-3].It is noteworthy that the quality of the hole-transport layer(HTL)largely determines the device performance.Nickel oxide(NiO_(x))has been paid great attention as a hole-transport material in PSCs because of its natural p-type property,low cost,good stability,and high transmittance[4,5].展开更多
The NiO_(x)/perovskite interface in NiO_(x)-based inverted perovskite solar cells(PSCs)is one of the main issues that restrict device performance and long-term stability,as the unwanted interfacial defects and undesir...The NiO_(x)/perovskite interface in NiO_(x)-based inverted perovskite solar cells(PSCs)is one of the main issues that restrict device performance and long-term stability,as the unwanted interfacial defects and undesirable redox reactions cause severe interfacial non-radiative recombination and open-circuit voltage(Voc)loss.Herein,a series of self-assembled molecules(SAMs)are employed to bind,bridge,and stabilize the NiO_(x)/perovskite interface by regulating the electrostatic potential.Based on systematically theoretical and experimental studies,4-pyrazolecarboxylic acid(4-PCA)is proven as an efficient molecule to simultaneously passivate the NiO_(x)and perovskite surface traps,release the interfacial tensile stress as well as quench the detrimental interface redox reactions,thus effectively suppressing the interfacial non-radiative recombination and enhancing the quality of perovskite crystals.Consequently,the PSCs with 4-PCA treatment exhibited an eminently increased Voc,leading to a significant increase in power conversion efficiency from 21.28%to 23.77%.Furthermore,the unencapsulated devices maintain 92.6%and 81.3%of their initial PCEs after storing in air with a relative humidity of 20%–30%for 1000 h and heating at 65℃for 500 h in a N_(2)-filled glovebox,respectively.展开更多
基金financial supports from National Natural Science Foundation of China(62175023).
文摘In this study,we developed a single-beam optical trap-based surface-enhanced Raman scattering(SERS)optofluidic molecular fingerprint spectroscopy detection system.This system utilizes a single-beam optical trap to concentrate free silver nanoparticles(AgNPs)within an optofluidic chip,significantly enhancing SERS performance.We investigated the optical field distribution characteristics within the tapered fiber using COMSOL simulation software and established a MATLAB simulation model to validate the single-beam optical trap's effectiveness in capturing AgNPs,demonstrating the theoretical feasibility of our approach.To verify the particle capture efficacy of the system,we experimentally controlled the optical trap's on-off state to manage the capture and release of particles precisely.The experimental results indicated that the Raman signal intensity in the capture state was significantly higher than in the non-capture state,confirming that the single-beam optical trap effectively enhances the SERS detection capability of the optofluidic detection system.Furthermore,we employed Raman mapping techniques to investigate the impact of the capture area on the SERS effect,revealing that the spectral intensity of molecular fingerprints in the laser-trapping region is significantly improved.We successfully detected the Raman spectrum of crystal violet at a concentration of 10^(−9)mol/L and pesticide thiram at a concentration of 10^(−5)mol/L,further demonstrating the ability of the single-beam optical trap in enhancing the molecular fingerprint spectrum identification capability of the SERS optofluidic chips.The optical trapping SERS optofluidic detection system developed in this study,as a key component of an integrated optoelectronic sensing system,holds the potential for integration with portable high-power lasers and high-performance Raman spectrometers.This integration is expected to advance highly integrated technologies and significantly enhance the overall performance and portability of optoelectronic sensing systems.
基金supported in part by the National Natural Science Foundation of China under Grant 62071073in part by the Fundamental Research Funds for Central Universities under Grant 2023CDJXY-041in part by the Foundation from Guangxi Key Laboratory of Optoelectronic Information Processing under Grant GD20201.
文摘The dynamic avalanche effect is a critical factor influencing the performance and reliability of the field-stop insulated gate bipolar transistors(FS-IGBT).Unclamped inductive switching(UIS)is the primary method for testing the dynamic avalanche capability of FS-IGBTs.Numerous studies have demonstrated that factors such as device structure,avalanche-generating current filaments,and electrical parameters influence the dynamic avalanche effect of the FS-IGBT.However,few studies have focused on enhancing the avalanche reliability of the FS-IGBT by adjusting circuit parameters during operation.In this paper,the dynamic avalanche effect of the FS-IGBT under UIS conditions is comprehensively investigated through a series of comparative experiments with varying circuit parameters,including bus voltage V_(DC),gate voltage V_(G),gate resistance R_(g),load inductance L,and temperature TC.Furthermore,a method to enhance the dynamic avalanche reliability of the FS-IGBT under UIS by optimizing circuit parameters is proposed.In practical applications,reducing gate voltage,increasing load inductance,and lowering temperature can effectively improve the dynamic avalanche capability of the FS-IGBT.
基金supported by the National Natural Science Foundation of China(NSFC 52175281,52475315)Youth Innovation Promotion Association of CAS(2021382)。
文摘The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show clinical potential,their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity(R^(2)>0.99 up to 1 MPa)in conventional designs.Inspired by the tactile sensing mechanism of human skin,where dermal stratification enables wide-range pressure adaptation and ion-channelregulated signaling maintains linear electrical responses,we developed a dual-mechanism flexible iontronic pressure sensor(FIPS).This innovative design synergistically combines two bioinspired components:interdigitated fabric microstructures enabling pressure-proportional contact area expansion(αP1/3)and iontronic film facilitating self-adaptive ion concentration modulation(αP^(2/3)),which together generate a linear capacitance-pressure response(CαP).The FIPS achieves breakthrough performance:242 kPa^(-1)sensitivity with 0.997linearity across 0-1 MPa,yielding a record linear sensing factor(LSF=242,000).The design is validated across various substrates and ionic materials,demonstrating its versatility.Finally,the FIPS-driven design enables a smart insole demonstrating 1.8%error in tibial load assessment during gait analysis,outperforming nonlinear counterparts(6.5%error)in early fracture-risk prediction.The biomimetic design framework establishes a universal approach for developing high-performance linear sensors,establishing generalized principles for medical-grade wearable devices.
基金financially supported by the Defense Industrial Technology Development Program(JCKY2017110C0654)the National Natural Science Foundation of China(11974063,61904023)the Chongqing Special Postdoctoral Science Foundation(cstc2019jcyj-bsh0026)。
文摘Bulk and interface carrier nonradiative recombination losses impede the further improvement of power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs).It is highly necessary to develop multifunctional strategy to minimize surface and interface nonradiative recombination losses.Herein,we report a bulk and interface defect passivation strategy via the synergistic effect of anions and cations,where multifunctional potassium sulphate(K_(2)SO_(4))is incorporated at SnO_(2)/perovskite interface.We find that K^(+)ions in K_(2)SO_(4)diffuse into perovskite layer and suppress the formation of bulk defects in perovskite films,and the SO_(4)^(2-)ions remain located at interface via the strong chemical interaction with SnO_(2)layer and perovskite layer,respectively.Through this synergistic modification strategy,effective defect passivation and improved energy band alignment are achieved simultaneously.These beneficial effects are translated into an efficiency increase from 19.45%to 21.18%with a low voltage deficit of0.53 V mainly as a result of boosted open-circuit voltage(V_(oc))after K_(2)SO_(4)modification.In addition,the K_(2)SO_(4)modification contributes to ameliorated stability.The present work provides a route to minimize bulk and interface nonradiative recombination losses for the simultaneous realization of PCE and stability enhancement by rational anion and cation synergistic engineering.
文摘Solution-processed oxide semiconductors have been considered as a potential alternative to vacuum-based ones in printable electronics.However,despite spincoated InZnO(IZO)thin-film transistors(TFTs)have shown a relatively high mobil-ity,the lack of carrier suppressor and the high sensitivity to oxygen and water molecules in ambient air make them potentially suffer issues of poor stability.In this work,Al is used as the third cation doping element to study the effects on the electrical,optoelectronic,and physical properties of IZO TFTs.A hydrophobic self-assembled monolayer called octadecyltrimethoxysilane is introduced as the surface passivation layer,aiming to reduce the effects from air and understand the importance of top surface conditions in solution-processed,ultra-thin oxide TFTs.Owing to the reduced trap states within the film and at the top surface enabled by the doping and passivation,the optimized TFTs show an increased current on/off ratio,a reduced drain current hysteresis,and a significantly enhanced bias stress stability,compared with the untreated ones.By combining with high-capacitance AlO_(x),TFTs with a low operating voltage of 1.5 V,a current on/off ratio of>10^(4) and a mobility of 4.6 cm^(2)/(V·s)are demonstrated,suggesting the promising features for future low-cost,low-power electronics.
基金the National Natural Science Foundation of China(Grant No.61875024)the Natural Science Foundation of Chongqing,China(Grant Nos.cstc2019jcyjmsxm X0639 and cstc2020jcyj-msxm0605)the Scientific and Technology Research Program of Chongqing Municipal Education Commission,China(Grant Nos.KJQN202000648 and KJQN201900602)。
文摘A two-dimensional(2D)surface-enhanced Raman scattering(SERS)substrate is fabricated by decorating carbon nanotube(CNT)films with Ag nanoparticles(Ag NPs)in different sizes,via simple and low-cost chemical reduction method and self-assembling method.The change of Raman and SERS activity of carbon nanotubes/Ag nanoparticles(CNTs/Ag NPs)composites with varying size of Ag NPs are investigated by using rhodamine 6G(R6G)as a probe molecule.Meanwhile,the scattering cross section of Ag NPs and the distribution of electric field of CNTs/Ag NPs composite are simulated through finite difference time domain(FDTD)method.Surface plasmon resonance(SPR)wavelength is redshifted as the size of Ag NPs increases,and the intensity of SERS and electric field increase with Ag NPs size increasing.The experiment and simulation results show a Raman scattering enhancement factor(EF)of 108for the hybrid substrate.
基金W.Cai and Z.Zang thank National Natural Science Foundation of China(11974063)Natural Science Foundation of Chongqing(cstc2020jcyj-jqX0028)+2 种基金China Postdoctoral Science Foundation(2020M683242)and Chongqing Special Postdoctoral Science Foundation(cstc2020jcyj-bshX0123)for financial support.L.Ding thanks National Key Research and Development Program of China(2017YFA0206600)National Natural Science Foundation of China(51773045,21772030,51922032,and 21961160720)for financial support.
文摘Thin-film transistors(TFTs)based on oxide semiconductors have gained a lot of attention in applications such as displays and sensors particularly in recent years due to the advantages of oxide semiconductors like high mobility,good uniformity over large area and low deposition temperature[1−4].However,the defects/traps at dielectric/channel interface and top surface of oxide TFTs might dramatically degrade device performance including current on/off ratio,mobility and most importantly stability[5,6],making it quite urgent to systematically make effective interface engineering to improve TFT performance.
基金the National Natural Science Foundation of China(Grant No.62375032)the Natural Science Foundation of Chongqing(Grant No.CSTB2023TIADKPX0017)+2 种基金the Open Fund of the State Key Laboratory of High Field Laser Physics(Shanghai Institute of Optics and Fine Mechanics)the China Postdoctoral Science Foundation(Grant No.BX20230355)the Department of Education of Guizhou Province(Guizhou Teaching and Technology[2023]015)。
文摘Metal halide perovskites(MHP)are potential candidates for the photocatalytic reduction of CO_(2)due to their long photogenerated carrier lifetime and charge diffusion length.However,the conventional long-chain ligand impedes the adsorption and activation of CO_(2)molecules in practical applications.Here,a ligand modulation technology is employed to enhance the photocatalytic CO_(2)reduction activity of lead-free Cs_(2)AgInCl_(6)microcrystals(MCs).The Cs_(2)AgInCl_(6)MCs passivated by Oleic acid(OLA)and Octanoic acid(OCA)are used for photocatalytic CO_(2)reduction.The results show that the surface defects and electronic properties of Cs_(2)AgInCl_(6)MCs can be adjusted through ligand modulation.Compared with the OLA-Cs_(2)AgInCl_(6),the OCA-Cs_(2)AgInCl_(6)catalyst demonstrated a significant improvement in the catalytic yield of CO and CH_(4).The CO and CH_(4)catalytic yields of OCA-Cs_(2)AgInCl_(6)reached 171.88 and34.15μmol g^(-1)h^(-1)which were 2.03 and 12.98 times higher than those of OLA-Cs_(2)AgInCl_(6),and the total electron consumption rate of OCA-Cs_(2)AgInCl_(6)was 615.2μmol g^(-1)h^(-1)which was 3.25 times higher than that of OLA-Cs_(2)AgInCl_(6).Furthermore,in situ diffuse reflectance infrared Fourier transform spectra revealed the enhancement of photocatalytic activity in Cs_(2)AgInCl_(6)MCs induced by ligand modulation.This study illustrates the potential of lead-free Cs_(2)AgInCl_(6)MCs for efficient photocatalytic CO_(2)reduction and provides a ligand modulation strategy for the active promotion of MHP photocatalysts.
基金supported by the General Program of the National Natural Science Foundation of China(NSFC,No.52075061)the Key Program of the National Natural Science Foundation of China(NSFC,No.U22B2089)the Science Fund for Distinguished Young Scholars of Chongqing(No.CSTB2022 NSCQ-JQX0006).
文摘Triboelectric nanogenerators(TENG),renowned for their remarkable capability to harness weak mechanical energy from the environment,have gained considerable attention owing to their cost-effectiveness,high output,and adaptability.This review provides a unique perspective by conducting a comprehensive and in-depth analysis of magnetically assisted TENGs that encompass structures,materials,and self-powered sensing systems.We systematically summarize the diverse functions of the magnetic assistance for TENGs,including system stiffness,components of the hybrid electromagnetic-triboelectric generator,transmission,and interaction forces.In the material domain,we review the incorporation of magnetic nano-composites materials,along with ferrofluid-based TENG and microstructure verification,which have also been summarized based on existing research.Furthermore,we delve into the research progress on physical quantity sensing and human-machine interface in magnetic-assisted TENGs.Our analysis highlights that magnetic assistance extends beyond the repulsive and suction forces under a magnetic field,thereby playing multifaceted roles in improving the output performance and environmental adaptability of the TENGs.Finally,we present the prevailing challenges and offer insights into the future trajectory of the magnetic-assisted TENGs development.
基金supported by the Sustainably Supported Foundation of SASTIND (No.HTKJ2021KL504008)the National Natural Science Foundation of China (No.51805054)+1 种基金the China Postdoctoral Science Foundation (No.2018M643405)the Technology Innovation Platform Project of Aero Engine Corporation of China (No.SHYS-GXDPL-18)。
文摘Frequency-swept interferometry(FSI) is a well-known ranging technique, but it suffers from three problems, namely, the Doppler effect, the frequency-sweep nonlinearity, as well as the slow frequency-sweep rate. The first two problems hinder the measurement accuracy, while the third problem limits the measurement rate. In this paper, we present a dynamic FSI(DFSI) that solves these three fundamental problems simultaneously. The DFSI consists of two auxiliary interferometers(AU1 and AU2) and two measurement interferometers(FSI and frequency-fixed interferometry(FFI)). We use FSI to obtain the Doppler and nonlinearity affected ranging signal, AU1 to monitor the frequency-tuning nonlinearity in the frequency-swept laser(FSL), and FFI and AU2 to constitute a laser vibrometer for monitoring the target motion-induced Doppler effect. Then, a novel signal fusion processing technique is applied to reconstruct the real dynamic distance from the above-measured signals. The dynamic ranging error caused by the Doppler effect and frequency-sweep nonlinearity in FSI can be eliminated and the dynamic distance at each sampling point can be obtained. The validity of this method is demonstrated by numerical experiments.
基金supported by the National Natural Science Foundation of China(62004058,U21A2076,21701041,52071048)the National Natural Science Foundation of China(21961160720)+6 种基金Natural Science Foundation of Hebei Province(F2020202022)the Open Fund of the State Key Laboratory of Integrated Optoelectronics(IOSKL2020KF09)State Key Laboratory of Reliability and Intelligence of Electrical Equipment(EERI_PI20200005)the Support Plan for Overseas Students to Return to China for Entrepreneurship and Innovation(cx2020003)the Fundamental Research Funds for the Central Universities(2020CDJ-LHZZ-074)Natural Science Foundation of Chongqing(cstc2020jcyj-msxm X0629)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)。
文摘Perovskite solar cells(PSCs)are taking a leading position in thin-film optoelectronic devices due to their excellent optical,physical and electrical properties[1-4].Nevertheless,the stability issue of metal halide perovskite precursor solution severely retards the future industrialization of PSCs[5-7].In stoichiometry,slight solution composition change will induce severe degradation of device performance.
基金supported by Chongqing Natural Science Foundation Innovation and Development Joint Fund(CSTB2025NSCQ-LZX0001)Ongoing Research Funding Program,(ORF-2025-762)King Saud University,Riyadh,Saudi Arabia,National Natural Science Foundationof China(11974063).
文摘Low-dimensional lead-free metal halides have emerged as promising candidates for anti-counterfeiting applications,characterized by their low toxicity,diverse crystal structures,and exceptional optical properties.Conventional anti-counterfeiting technologies based on low-dimensional metal halides are often constrained by complex and time-consuming heating and solvent treatments that may insufficiently modify the luminescent characteristics of emitters,thus hindering their practical implementation in effective anti-counterfeiting strategies.In this study,we employ an innovative alloying strategy in low-dimensional zinc halides Cs_(2)ZnCl_(4) to enhance their luminescent performance.By introducing self-trapped exciton(STE)states through the alloying of Cu^(+)and Sb^(3+)ions in Cs_(2)ZnCl_(4),we achieve bright blue and red photoluminescence(PL)centered at 492 nm and 744 nm,respectively,under 266 nm excitation,with only red emission observed under 365 nm excitation.This approach enables instant and reliable anti-counterfeiting applications.This work presents new opportunities for developing robust anti-counterfeiting and information encryption/decryption technologies.
基金Project supported by the National Natural Science Foundation of China (Grant No. 62075182)the National Key Research and Development Program of China (Grant No. 2022YFB3207502)。
文摘A multi-wavelength and transversely mode-switchable fiber laser based on a ring-core fiber Bragg grating(RCFBG) is proposed. Two RCFBGs with high and low reflectivity are inscribed using a femtosecond laser and the phase mask scanning technique, serving as the mirrors in an all-fiber laser linear resonator. Leveraging the polarization dependence of the RCFBG through side exposure, we can readily achieve switchable single-wavelength, dual-wavelength, or triple-wavelength laser outputs by adjusting the polarization controller(PC) inside the resonator. Additionally, three distinct modes, namely, cylindrical vector beam(CVB), fundamental and mixed modes, are successfully obtained in single-wavelength laser operation.Azimuthally or radially polarized lasers can be realized by tuning two PCs inside and outside the resonator while operating in CVB mode. This innovative multi-wavelength and transversely mode-switchable fiber laser based on RCFBGs holds significant potential for applications in wavelength division multiplexing and mode division multiplexing systems.
基金supported the Chongqing Natural Science Foundation(CSTB2023NSCQ-MSX0459&CSTB2023NSCQ-MSX0231)the Graduate Research and Innovation Foundation of Chongqing,China(CYB23048)+1 种基金the Fundamental Research Program under Grant(JCKY2022603C017)National Natural Science Foundation of China(NSFC 52175281).
文摘Electronic skin has showcased superior sensing capabilities inspired from human skin.However,most preceding studies focused on the dermis of the skin rather than the epidermis.In particular,the pseudo-porous structural domain of the epidermis increases the skin's tolerance while ensuring its susceptibility to touch.Yet,most endeavors on the porous structures failed to replicate the superior sensing performance of skin-like counterparts in terms of sensitivity and/or detection range.Stimulated by the strategy that the epidermis of the skin absorbs energy while producing ionic conduction to the nerves,this work initiatively introduced an easy-to-produce,and low-cost pressure sensor based on ionic-gel foam,and achieved a high sensitivity(2893 kPa^(-1))within a wide pressure range(up to~1 MPa),which ranked among the best cases thus far.Moreover,the factors affecting the sensor performance were explored while the sensing principles were enriched.Inspiringly,the plantar pressure measurement by harnessing the as-prepared sensor unveiled an ultra-broad detection range(100 Pa-1 MPa),thus delivering a huge application potential in the field of robot and health monitoring.
基金supported by the National Natural Science Foundation of China(NSFC)(Grant Nos.11974063,11904156)Postdoctoral Science Foundation of China(No.2019M653336).The calcu-lations were done at the Center for Computational Science and Engineering of Southern University of Science and Technology(SUSTech).
文摘All-inorganic CsPbBr_(3) perovskite quantum dots(QDs)have received great attention in white light emission because of their outstanding properties.However,their practical application is hindered by poor stability.Herein,we propose a simple strategy to synthesize excellent stability and efficient emission of CsPbBr_(3) QDs by using 2-hexyldecanoic acid(DA)as a ligand to replace the regular oleic acid(OA)ligand.Thanks to the strong binding energy between DA ligand and QDs,the modified QDs not only show a high photoluminescence quantum yield(PLQY)of 96%but also exhibit high stability against ethanol and water.Thereby warm white light-emitting diodes(WLEDs)are constructed by combining lig-and modified CsPbBr_(3) QDs with red AgInZnS QDs on blue emitting InGaN chips,exhibiting a color rendering index of 93,a power efficiency of 64.8 lm/W,a CIE coordinate of(0.44,0.42)and correlated color temperature value of 3018 K.In ad-dition,WLEDs based on ligand modified CsPbBr_(3) QDs also exhibit better thermal performance than that of WLEDs based on the regular CsPbBr_(3) QDs.The combination of improved efficiency and better thermal stability with high color quality indicates that the modified CsPbBr_(3) QDs are ideal for WLEDs application.
文摘Colloidal semiconductor nanocrystals have been proven to be promising candidates for applications in low‐cost and high‐performance photovoltaics,bioimaging,and photocatalysis due to their novel size‐and shape‐dependent properties.Among the colloidal systems,I‐III‐VI semiconductor nanocrystals(NCs)have drawn much attention in the past few decades.Compared to binary NCs,ternary I‐III‐VI NCs not only exhibit low toxicity,but also a high performance similar to that of binary NCs.In this review,we mainly focus on the synthesis,properties,and applications of I‐III‐VI NCs.We summarize the major synthesis methods,analyze their photophysical and electronic properties,and highlight some of the latest applications of I‐III‐VI NCs in solar cells,light‐emitting diodes,bioimaging,and photocatalysis.Finally,based on the information reviewed,we highlight the existing problems and challenges.
基金financially supported by the Support Plan for Overseas Students to Return to China for Entrepreneurship and Innovation(cx2020003)the Fundamental Research Funds for the Central Universities(2020CDJ-LHZZ-074)the Natural Science Foundation of Chongqing(cstc2020jcyj-msxm X0629)。
文摘The defects from electron transport layer,perovskite layer and their interface would result in carrier nonradiative recombination losses.Poor buried interfacial contact is detrimental to charge extraction and device stability.Here,we report a bottom-up holistic carrier management strategy induced synergistically by multiple chemical bonds to minimize bulk and interfacial energy losses for high-performance perovskite photovoltaics.4-trifluoromethyl-benzamidine hydrochloride(TBHCl)containing–CF_(3),amidine cation and Cl^(-)is in advance incorporated into SnO_(2)colloid solution to realize bottom-up modification.The synergistic effect of multiple functional groups and multiple-bond-induced chemical interaction are revealed theoretically and experimentally.F and Cl^(-)can passivate oxygen vacancy and/or undercoordinated Sn^(4+)defects by coordinating with Sn^(4+).The F can suppress cation migration and modulate crystallization via hydrogen bond with FA^(+),and can passivate lead defects by coordinating with Pb^(2+).The–NH_(2)–C=NH^(+)_(2)and Cl^(-)can passivate cation and anion vacancy defects through ionic bonds with perovskites,respectively.Through TBHCl modification,the suppression of agglomeration of SnO_(2)nanoparticles,bulk and interfacial defect passivation,and release of tensile strains of perovskite films are demonstrated,which resulted in a PCE enhancement from 21.28%to 23.40%and improved stability.With post-treatment,the efficiency is further improved to 23.63%.
基金support from the Fundamental Research Funds for the National Key Research and Development Program of China(Grant no.2018YFB2200500)the National Natural Science Foundation of China(61975023,51775070,22072010,61875211)+5 种基金the Guangdong Province International Scientific and Technological Cooperation Projects(grant number 2020A0505100011)the CAS Interdisciplinary Innovation Team and the Open Fund of the State Key Laboratory of High Field Laser Physics(Shanghai Institute of Optics and Fine Mechanics)the Opening Project of State Key Laboratory of Advanced Technology for Float Glassthe State Key Laboratory of Advanced Technology for Materials Synthesis and Processing(Wuhan University of Technology,No.2021-KF-19)the Natural Science Foundation of Chongqing(Grant No.cstc2021ycjh-bgzxm0181)the Science and Technology Research Program of Chongqing Municipal Education Commission(Grant No.KJZD-K202100601).
文摘All-inorganic lead-free palladium(Pd)halogen perovskites with prominent optoelectronic properties provide admirable potential for selective photo-and electroreduction of CO_(2).But it remains unachieved for effectively converting the CO_(2)to CO with high selectivity on Pd-based perovskites driven by solar light or electricity.Herein,high-quality Cs_(2)PdBr_(6)microcrystals and nanocrystals were synthesized through a facile antisolvent method.Among all the reported pure-phase perovskites,the Cs_(2)PdBr_(6)nanocrystals synthesized at 50℃performed the highest effectiveness on CO_(2)to CO conversion generating 73.8μmol g^(-1)of CO yield with 100%selectivity under visible light illumination(λ>420 nm)for 3 h.Meanwhile,for the first time,we report a new application of lead-free perovskites,in which they are applied to electrocatalysis of CO_(2)reduction reaction.Noticeably,they showed significant electrocatalytic activity(Faradaic yield:78%for CO)and operation stability(10 h).And the surface reaction intermediates were dynamically monitored and precisely unraveled according to the in situ diffuse reflectance infrared Fourier transform spectra investigation.In combination with the density functional theory calculation,the reaction mechanism and pathways were revealed.This work not only provides significant strategies to enhance the photocatalytic performance of perovskites,but also shows excellent potential for their application in electrocatalysis.
基金This work was supported by the National Natural Science Foundation of China(62004058 and U21A2076)Natural Science Foundation of Hebei Province(F2020202022)+5 种基金State Key Laboratory of Reliability and Intelligence of Electrical Equipment(EERI_PI20200005)S&T Program of Hebei(215676146H and 225676163GH)Hebei Graduate Innovation Funding Project(CXZZBS2023037 and CXZZSS2023026)L.Ding thanks the National Key Research and Development Program of China(2022YFB3803300)the open research fund of Songshan Lake Materials Laboratory(2021SLABFK02)the National Natural Science Foundation of China(21961160720).
文摘Inverted perovskite solar cells(PSCs)have attracted interest due to their simple fabrication,long-term stability,and small hysteresis[1-3].It is noteworthy that the quality of the hole-transport layer(HTL)largely determines the device performance.Nickel oxide(NiO_(x))has been paid great attention as a hole-transport material in PSCs because of its natural p-type property,low cost,good stability,and high transmittance[4,5].
基金financially supported by the National Natural Science Foundation of China (U22A2078)Fundamental Research Funds for the Central Universities (2022CDJQY-007)
文摘The NiO_(x)/perovskite interface in NiO_(x)-based inverted perovskite solar cells(PSCs)is one of the main issues that restrict device performance and long-term stability,as the unwanted interfacial defects and undesirable redox reactions cause severe interfacial non-radiative recombination and open-circuit voltage(Voc)loss.Herein,a series of self-assembled molecules(SAMs)are employed to bind,bridge,and stabilize the NiO_(x)/perovskite interface by regulating the electrostatic potential.Based on systematically theoretical and experimental studies,4-pyrazolecarboxylic acid(4-PCA)is proven as an efficient molecule to simultaneously passivate the NiO_(x)and perovskite surface traps,release the interfacial tensile stress as well as quench the detrimental interface redox reactions,thus effectively suppressing the interfacial non-radiative recombination and enhancing the quality of perovskite crystals.Consequently,the PSCs with 4-PCA treatment exhibited an eminently increased Voc,leading to a significant increase in power conversion efficiency from 21.28%to 23.77%.Furthermore,the unencapsulated devices maintain 92.6%and 81.3%of their initial PCEs after storing in air with a relative humidity of 20%–30%for 1000 h and heating at 65℃for 500 h in a N_(2)-filled glovebox,respectively.
