Aiming at the problem that back propagation(BP)neural network predicts the low accuracy rate of fluff fabric after fluffing process,a BP neural network model optimized by particle swarm optimization(PSO)algorithm is p...Aiming at the problem that back propagation(BP)neural network predicts the low accuracy rate of fluff fabric after fluffing process,a BP neural network model optimized by particle swarm optimization(PSO)algorithm is proposed.The sliced image is obtained by the principle of light-cutting imaging.The fluffy region of the adaptive image segmentation is extracted by the Freeman chain code principle.The upper edge coordinate information of the fabric is subjected to one-dimensional discrete wavelet decomposition to obtain high frequency information and low frequency information.After comparison and analysis,the BP neural network was trained by high frequency information,and the PSO algorithm was used to optimize the BP neural network.The optimized BP neural network has better weights and thresholds.The experimental results show that the accuracy of the optimized BP neural network after applying high-frequency information training is 97.96%,which is 3.79%higher than that of the unoptimized BP neural network,and has higher detection accuracy.展开更多
Electronic components' reliability has become the key of the complex system mission execution. Analog circuit is an important part of electronic components. Its fault diagnosis is far more challenging than that of...Electronic components' reliability has become the key of the complex system mission execution. Analog circuit is an important part of electronic components. Its fault diagnosis is far more challenging than that of digital circuit. Simulations and applications have shown that the methods based on BP neural network are effective in analog circuit fault diagnosis. Aiming at the tolerance of analog circuit,a combinatorial optimization diagnosis scheme was proposed with back propagation( BP) neural network( BPNN).The main contributions of this scheme included two parts:( 1) the random tolerance samples were added into the nominal training samples to establish new training samples,which were used to train the BP neural network based diagnosis model;( 2) the initial weights of the BP neural network were optimized by genetic algorithm( GA) to avoid local minima,and the BP neural network was tuned with Levenberg-Marquardt algorithm( LMA) in the local solution space to look for the optimum solution or approximate optimal solutions. The experimental results show preliminarily that the scheme substantially improves the whole learning process approximation and generalization ability,and effectively promotes analog circuit fault diagnosis performance based on BPNN.展开更多
Feedforward Neural Network(FNN)is one of the most popular neural network models that is utilized to solve a wide range of nonlinear and complex problems.Several models such as stochastic gradient descent have been dev...Feedforward Neural Network(FNN)is one of the most popular neural network models that is utilized to solve a wide range of nonlinear and complex problems.Several models such as stochastic gradient descent have been developed to train FNNs.However,they mainly suffer from falling into local optima leading to reduce the accuracy of FNNs.Moreover,the convergence speed of training process depends on the initial values of weights and biases in FNNs.Generally,these values are randomly determined by most of the training models.To deal with these issues,in this paper,we develop a novel evolutionary algorithm by modifying the original version of Whale Optimization Algorithm(WOA).To this end,a nonlinear function is introduced to improve the exploration and exploitation phases in the search process of WOA.Then,the modified WOA is applied to automatically obtain the initial values of weights and biases in FNN leading to reduce the probability of falling into local optima.In addition,the FNN model trained by the modified WOA is used to develop a classification approach for medical diagnosis problems.Ten medical diagnosis datasets are utilized to evaluate the efficiency of the proposed method.Also,four evaluation metrics including accuracy,AUC,specificity,and sensitivity are used in the experiments to compare the performance of classification models.The experimental results demonstrate that the proposed method is better than other competing classification models due to achieving higher values of accuracy,AUC,specificity,and sensitivity metrics for the used datasets.展开更多
The paper proposes a wireless sensor network(WSN)localization algorithm based on adaptive whale neural network and extended Kalman filtering to address the problem of excessive reliance on environmental parameters A a...The paper proposes a wireless sensor network(WSN)localization algorithm based on adaptive whale neural network and extended Kalman filtering to address the problem of excessive reliance on environmental parameters A and signal constant n in traditional signal propagation path loss models.This algorithm utilizes the adaptive whale optimization algorithm to iteratively optimize the parameters of the backpropagation(BP)neural network,thereby enhancing its prediction performance.To address the issue of low accuracy and large errors in traditional received signal strength indication(RSSI),the algorithm first uses the extended Kalman filtering model to smooth the RSSI signal values to suppress the influence of noise and outliers on the estimation results.The processed RSSI values are used as inputs to the neural network,with distance values as outputs,resulting in more accurate ranging results.Finally,the position of the node to be measured is determined by combining the weighted centroid algorithm.Experimental simulation results show that compared to the standard centroid algorithm,weighted centroid algorithm,BP weighted centroid algorithm,and whale optimization algorithm(WOA)-BP weighted centroid algorithm,the proposed algorithm reduces the average localization error by 58.23%,42.71%,31.89%,and 17.57%,respectively,validating the effectiveness and superiority of the algorithm.展开更多
With the continuous increase in the proportional use of wind energy across the globe,the reduction of power generation efficiency and safety hazards caused by the icing on wind turbine blades have attracted more consi...With the continuous increase in the proportional use of wind energy across the globe,the reduction of power generation efficiency and safety hazards caused by the icing on wind turbine blades have attracted more consideration for research.Therefore,it is crucial to accurately analyze the thickness of icing on wind turbine blades,which can serve as a basis for formulating corresponding control measures and ensure a safe and stable operation of wind turbines in winter times and/or in high altitude areas.This paper fully utilized the advantages of the support vector machine(SVM)and back-propagation neural network(BPNN),with the incorporation of particle swarm optimization(PSO)algorithms to optimize the parameters of the SVM.The paper proposes a hybrid assessment model of PSO-SVM and BPNN based on dynamic weighting rules.Three sets of icing data under a rotating working state of the wind turbine were used as examples for model verification.Based on a comparative analysis with other models,the results showed that the proposed model has better accuracy and stability in analyzing the icing on wind turbine blades.展开更多
This paper introduced the Genetic Algorithms (GAs) and Artificial Neural Networks (ANNs), which have been widely used in optimization of allocating. The combination way of the two optimizing algorithms was used in boa...This paper introduced the Genetic Algorithms (GAs) and Artificial Neural Networks (ANNs), which have been widely used in optimization of allocating. The combination way of the two optimizing algorithms was used in board allocating of furniture production. In the experiment, the rectangular flake board of 3650 mm 1850 mm was used as raw material to allocate 100 sets of Table Bucked. The utilizing rate of the board reached 94.14 % and the calculating time was only 35 s. The experiment result proofed that the method by using the GA for optimizing the weights of the ANN can raise the utilizing rate of the board and can shorten the time of the design. At the same time, this method can simultaneously searched in many directions, thus greatly in-creasing the probability of finding a global optimum.展开更多
Though traditional methods could recognize some facies, e.g. lagoon facies, backshoal facies and foreshoal facies, they couldn't recognize reef facies and shoal facies well. To solve this problem, back propagation...Though traditional methods could recognize some facies, e.g. lagoon facies, backshoal facies and foreshoal facies, they couldn't recognize reef facies and shoal facies well. To solve this problem, back propagation neural network(BP-ANN) and an improved BP-ANN with better stability and suitability, optimized by a particle swarm optimizer(PSO) algorithm(PSO-BP-ANN) were proposed to solve the microfacies' auto discrimination of M formation from the R oil field in Iraq. Fourteen wells with complete core, borehole and log data were chosen as the standard wells and 120 microfacies samples were inferred from these 14 wells. Besides, the average value of gamma, neutron and density logs as well as the sum of squares of deviations of gamma were extracted as key parameters to build log facies(facies from log measurements)-microfacies transforming model. The total 120 log facies samples were divided into 12 kinds of log facies and 6 kinds of microfacies, e.g. lagoon bioclasts micrite limestone microfacies, shoal bioclasts grainstone microfacies, backshoal bioclasts packstone microfacies, foreshoal bioclasts micrite limestone microfacies, shallow continental micrite limestone microfacies and reef limestone microfacies. Furthermore, 68 samples of these 120 log facies samples were chosen as training samples and another 52 samples were gotten as testing samples to test the predicting ability of the discrimination template. Compared with conventional methods, like Bayes stepwise discrimination, both the BP-ANN and PSO-BP-ANN can integrate more log details with a correct rate higher than 85%. Furthermore, PSO-BP-ANN has more simple structure, smaller amount of weight and threshold and less iteration time.展开更多
Phishing attacks present a persistent and evolving threat in the cybersecurity land-scape,necessitating the development of more sophisticated detection methods.Traditional machine learning approaches to phishing detec...Phishing attacks present a persistent and evolving threat in the cybersecurity land-scape,necessitating the development of more sophisticated detection methods.Traditional machine learning approaches to phishing detection have relied heavily on feature engineering and have often fallen short in adapting to the dynamically changing patterns of phishingUniformResource Locator(URLs).Addressing these challenge,we introduce a framework that integrates the sequential data processing strengths of a Recurrent Neural Network(RNN)with the hyperparameter optimization prowess of theWhale Optimization Algorithm(WOA).Ourmodel capitalizes on an extensive Kaggle dataset,featuring over 11,000 URLs,each delineated by 30 attributes.The WOA’s hyperparameter optimization enhances the RNN’s performance,evidenced by a meticulous validation process.The results,encapsulated in precision,recall,and F1-score metrics,surpass baseline models,achieving an overall accuracy of 92%.This study not only demonstrates the RNN’s proficiency in learning complex patterns but also underscores the WOA’s effectiveness in refining machine learning models for the critical task of phishing detection.展开更多
The parallel stabilized platform is an important equipment to ensure the stability of marine operations,which can effectively mitigate collisions of lifted goods.The 3UPU_UP parallel stabilized platform system is prop...The parallel stabilized platform is an important equipment to ensure the stability of marine operations,which can effectively mitigate collisions of lifted goods.The 3UPU_UP parallel stabilized platform system is proposed,and the kinematics and dynamics of the 3UPU_UP parallel stabilized platform are researched,where U denotes universal joint;P denotes prismatic joint.The platform motion can be realized by controlling the actuators to realize compensation ship motion.While conventional control algorithms are difficult to cope with complex nonlinear systems,the optimization control method has been proposed.Based on the back propagation(BP)neural network proportional-integral-derivative(PID)controller,the particle swarm optimization(PSO)is combined with the BP neural network,and the combined PSO-BP PID controller optimization algorithm is introduced into the servo control system.Compared with classic PID and BP PID,the overshoot of PSO-BP PID to the response of step signal is reduced by 10.2%and 11.48%,respectively,and 0.36s and 0.17s reduce the time required to reach stable states.By comparing the reduction of the error under various sea conditions,the upper platform tracking error curve is flatter under a PID controller based on PSO-BP,the tracking motion is closer to the theoretical value and the control accuracy is improved.The maximum tracking error of the upper platform is smaller,the overall motion vibration of the platform is reduced,and the anti-interference ability is enhanced.The PSO-BP PID controller for wave compensated platform servo system control is more reasonable,more adaptable to the complex and changing environment.展开更多
Rail profile optimization is a critical strategy for mitigating wear and extending service life.However,damage at the wheel-rail contact surface goes beyond simple rail wear,as it also involves fatigue phenomena.Focus...Rail profile optimization is a critical strategy for mitigating wear and extending service life.However,damage at the wheel-rail contact surface goes beyond simple rail wear,as it also involves fatigue phenomena.Focusing solely on wear and not addressing fatigue in profile optimization can lead to the propagation of rail cracks,the peeling of material off the rail,and even rail fractures.Therefore,we propose an optimization approach that balances rail wear and fatigue for heavy-haul railway rails to mitigate rail fatigue damage.Initially,we performed a field investigation to acquire essential data and understand the characteristics of track damage.Based on theory and measured data,a simulation model for wear and fatigue was then established.Subsequently,the control points of the rail profile according to cubic non-uniform rational B-spline(NURBS)theory were set as the research variables.The rail’s wear rate and fatigue crack propagation rate were adopted as the objective functions.A multi-objective,multi-variable,and multi-constraint nonlinear optimization model was then constructed,specifically using a Levenberg Marquardt-back propagation neural network as optimized by the particle swarm optimization algorithm(PSO-LM-BP neural network).Ultimately,optimal solutions from the model were identified using a chaos microvariation adaptive genetic algorithm,and the effectiveness of the optimization was validated using a dynamics model and a rail damage model.展开更多
Body Area Networks(BODYNETs)or Wireless Body Area Networks(WBAN),being an important type of ad-hoc network,plays a vital role in multimedia,safety,and traffic management applications.In BODYNETs,rapid topology changes...Body Area Networks(BODYNETs)or Wireless Body Area Networks(WBAN),being an important type of ad-hoc network,plays a vital role in multimedia,safety,and traffic management applications.In BODYNETs,rapid topology changes occur due to high node mobility,which affects the scalability of the network.Node clustering is one mechanism among many others,which is used to overcome this issue in BODYNETs.There are many clustering algorithms used in this domain to overcome this issue.However,these algorithms generate a large number of Cluster Heads(CHs),which results in scarce resource utilization and degraded performance.In this research,an efficient clustering technique is proposed to handle these problems.The transmission range of BODYNET nodes is dynamically tuned accordingly as per their operational requirements.By optimizing the transmission range,the packet loss ratio is minimized,and link quality is improved,which leads to reduced energy consumption.To select optimal CHs the Whale Optimization Algorithm(WOA)is used based on their fitness,which enhances the network performance by reducing routing overhead.Our proposed scheme outclasses the existing state-of-the-art techniques,e.g.,Ant Colony Optimization(ACO),Gray Wolf Optimization(GWO),and Dragonfly Optimization Algorithm(DFA)in terms of energy consumption and cluster building time.展开更多
SDN (Software Defined Network) has many security problems, and DDoS attack is undoubtedly the most serious harm to SDN architecture network. How to accurately and effectively detect DDoS attacks has always been a diff...SDN (Software Defined Network) has many security problems, and DDoS attack is undoubtedly the most serious harm to SDN architecture network. How to accurately and effectively detect DDoS attacks has always been a difficult point and focus of SDN security research. Based on the characteristics of SDN, a DDoS attack detection method combining generalized entropy and PSOBP neural network is proposed. The traffic is pre-detected by the generalized entropy method deployed on the switch, and the detection result is divided into normal and abnormal. Locate the switch that issued the abnormal alarm. The controller uses the PSO-BP neural network to detect whether a DDoS attack occurs by further extracting the flow features of the abnormal switch. Experiments show that compared with other methods, the detection accurate rate is guaranteed while the CPU load of the controller is reduced, and the detection capability is better.展开更多
In order to investigate the boron removal effect in slag refining process,intermediate frequency furnace was used to purify boron in SiO2-CaO-Na3 AlF6-CaSiO3 slag system at 1,550℃,and back propagation(BP)neural netwo...In order to investigate the boron removal effect in slag refining process,intermediate frequency furnace was used to purify boron in SiO2-CaO-Na3 AlF6-CaSiO3 slag system at 1,550℃,and back propagation(BP)neural network was used to model the relationship between slag compositions and boron content in SiO2-CaO-Na3 AlF6-CaSiO3 slag system.The BP neural network predicted error is below 2.38%.The prediction results show that the slag composition has a significant influence on boron removal.Increasing the basicity of slag by adding CaO or Na3 AlF6 to CaSiO3-based slag could contribute to the boron removal,and the addition of Na3 AlF6 has a better removal effect in comparison with the addition of CaO.The oxidizing characteristic of CaSiO3 results in the ineffective removal with the addition of SiO2.The increase of oxygen potential(pO2)in the CaO-Na3 AlF6-CaSiO3 slag system by varying the SiO2 proportion can also contribute to the boron removal in silicon ingot.The best slag composition to remove boron was predicted by BP neural network using genetic algorithm(GA).The predicted results show that the mass fraction of boron in silicon reduces from 14.0000×10-6 to0.4366×10-6 after slag melting using 23.12%SiO2-10.44%CaO-16.83%Na3 AlF6-49.61%CaSiO3 slag system,close to the experimental boron content in silicon which is below 0.5×10-6.展开更多
High-resolution laser additive manufacturing(LAM)significantly releases design free-dom,promoting the development of topology optimization(TO)and advancing structural design methods.In order to fully take advantage of...High-resolution laser additive manufacturing(LAM)significantly releases design free-dom,promoting the development of topology optimization(TO)and advancing structural design methods.In order to fully take advantage of voxelated forming methods and establish the quantitative relationship between the mechanical properties of printing components and multiple process factors(laser-and process-parameters),the concurrent optimization design method based on LAM should cover the process-performance relationship.This study proposes a novel artificial intelligence-facilitated TO method for LAM to concurrently design microscale material property and macroscale structural topology of 3D components by adopting heuristic and gradient-based algorithms.The process–structure–property relationship of selective laser sintering is established by the back propagation neural network,and it is integrated into the TO algorithm for providing a systematic design scheme of structural topology and process parameter.Compared with the classical optimization method,numerical examples show that this method is able to improve the mechanical performance of the macrostructure significantly.In addition,the collaborative design method is able to be widely applied for complex functional part design and optimization,as well as case studies on artificial intelligence-facilitated product evaluation.展开更多
The prediction of wind speed is imperative nowadays due to the increased and effective generation of wind power.Wind power is the clean,free and conservative renewable energy.It is necessary to predict the wind speed,...The prediction of wind speed is imperative nowadays due to the increased and effective generation of wind power.Wind power is the clean,free and conservative renewable energy.It is necessary to predict the wind speed,to implement wind power generation.This paper proposes a new model,named WT-GWO-BPNN,by integrating Wavelet Transform(WT),Back Propagation Neural Network(BPNN)and GreyWolf Optimization(GWO).The wavelet transform is adopted to decompose the original time series data(wind speed)into approximation and detailed band.GWO-BPNN is applied to predict the wind speed.GWO is used to optimize the parameters of back propagation neural network and to improve the convergence state.This work uses wind power data of six months with 25,086 data points to test and verify the performance of the proposed model.The proposed work,WT-GWO-BPNN,predicts the wind speed using a three-step procedure and provides better results.Mean Absolute Error(MAE),Mean Squared Error(MSE),Mean absolute percentage error(MAPE)and Root mean squared error(RMSE)are calculated to validate the performance of the proposed model.Experimental results demonstrate that the proposed model has better performance when compared to other methods in the literature.展开更多
A significant advantage of medical image processing is that it allows non-invasive exploration of internal anatomy in great detail.It is possible to create and study 3D models of anatomical structures to improve treatm...A significant advantage of medical image processing is that it allows non-invasive exploration of internal anatomy in great detail.It is possible to create and study 3D models of anatomical structures to improve treatment outcomes,develop more effective medical devices,or arrive at a more accurate diagnosis.This paper aims to present a fused evolutionary algorithm that takes advantage of both whale optimization and bacterial foraging optimization to optimize feature extraction.The classification process was conducted with the aid of a convolu-tional neural network(CNN)with dual graphs.Evaluation of the performance of the fused model is carried out with various methods.In the initial input Com-puter Tomography(CT)image,150 images are pre-processed and segmented to identify cancerous and non-cancerous nodules.The geometrical,statistical,struc-tural,and texture features are extracted from the preprocessed segmented image using various methods such as Gray-level co-occurrence matrix(GLCM),Histo-gram-oriented gradient features(HOG),and Gray-level dependence matrix(GLDM).To select the optimal features,a novel fusion approach known as Whale-Bacterial Foraging Optimization is proposed.For the classification of lung cancer,dual graph convolutional neural networks have been employed.A com-parison of classification algorithms and optimization algorithms has been con-ducted.According to the evaluated results,the proposed fused algorithm is successful with an accuracy of 98.72%in predicting lung tumors,and it outper-forms other conventional approaches.展开更多
Based on the critical position of the endpoint quality prediction for basic oxygen furnaces （BOFs） in steelmaking, and the latest results in computational intelligence （C1）, this paper deals with the development ...Based on the critical position of the endpoint quality prediction for basic oxygen furnaces （BOFs） in steelmaking, and the latest results in computational intelligence （C1）, this paper deals with the development of a novel memetic algorithm （MA） for neural network （NN） lcarnmg. Included in this is the integration of extremal optimization （EO） and Levenberg-Marquardt （LM） pradicnt search, and its application in BOF endpoint quality prediction. The fundamental analysis reveals that the proposed EO-LM algorithm may provide superior performance in generalization, computation efficiency, and avoid local minima, compared to traditional NN learning methods. Experimental results with production-scale BOF data show that the proposed method can effectively improve the NN model for BOF endpoint quality prediction.展开更多
Dynamic analysis of scissor hydraulic lift platform has been performed to invest/gate the key factors which determine size and shape of the platfolan. By using MATLAB, the position of hydraulic cylinder has been optim...Dynamic analysis of scissor hydraulic lift platform has been performed to invest/gate the key factors which determine size and shape of the platfolan. By using MATLAB, the position of hydraulic cylinder has been optimized to reduce jacking force of piston and the whole system. Thus structure deformation decreases which is beneficial to control accuracy. Additionally, a new proportion integration differentiation （PID） control mode based on BP neural network has been developed to improve the stability and accuracy for the pasitio^L control in this system. Compared with existing PID tuning meth~~ls and fuzzy self-adjusted PID controllers, the proposed back propagation （BP） based PID controller can achieve better performance for a wide range of complex processes and realize self-tuning of parameters. It was confirmed that the performance of the lift platform regarding the force variation and position accuracy was greatly enhanced by optimizing of the system both in structure and control. Considerable economic benefit can also be achieved thrangh the application of this intelligent PID system.展开更多
The permanent magnet eddy current coupler(PMEC)solves the problem of flexible connection and speed regulation between the motor and the load and is widely used in electrical transmission systems.It provides torque to ...The permanent magnet eddy current coupler(PMEC)solves the problem of flexible connection and speed regulation between the motor and the load and is widely used in electrical transmission systems.It provides torque to the load and generates heat and losses,reducing its energy transfer efficiency.This issue has become an obstacle for PMEC to develop toward a higher power.This paper aims to improve the overall performance of PMEC through multi-objective optimization methods.Firstly,a PMEC modeling method based on the Levenberg-Marquardt back propagation(LMBP)neural network is proposed,aiming at the characteristics of the complex input-output relationship and the strong nonlinearity of PMEC.Then,a novel competition mechanism-based multi-objective particle swarm optimization algorithm(NCMOPSO)is proposed to find the optimal structural parameters of PMEC.Chaotic search and mutation strategies are used to improve the original algorithm,which improves the shortcomings of multi-objective particle swarm optimization(MOPSO),which is too fast to converge into a global optimum,and balances the convergence and diversity of the algorithm.In order to verify the superiority and applicability of the proposed algorithm,it is compared with several popular multi-objective optimization algorithms.Applying them to the optimization model of PMEC,the results show that the proposed algorithm has better comprehensive performance.Finally,a finite element simulation model is established using the optimal structural parameters obtained by the proposed algorithm to verify the optimization results.Compared with the prototype,the optimized PMEC has reduced eddy current losses by 1.7812 kW,increased output torque by 658.5 N·m,and decreased costs by 13%,improving energy transfer efficiency.展开更多
基金Natural Science Basic Research Plan in Shaanxi Province of China(No.2017JM5141)Shaanxi Provincial Education Department,China(No.17JK0334)+2 种基金Xi’an Polytechnic University Graduate Innovation Fund,China(No.chx2019083)Xi’an Science and Technology Bureau for Research Plan,China(No.201805030YD8CG14(5))Science Foundation for Doctorate Research of Xi’an Polytechnic University,China(No.BS1535)
文摘Aiming at the problem that back propagation(BP)neural network predicts the low accuracy rate of fluff fabric after fluffing process,a BP neural network model optimized by particle swarm optimization(PSO)algorithm is proposed.The sliced image is obtained by the principle of light-cutting imaging.The fluffy region of the adaptive image segmentation is extracted by the Freeman chain code principle.The upper edge coordinate information of the fabric is subjected to one-dimensional discrete wavelet decomposition to obtain high frequency information and low frequency information.After comparison and analysis,the BP neural network was trained by high frequency information,and the PSO algorithm was used to optimize the BP neural network.The optimized BP neural network has better weights and thresholds.The experimental results show that the accuracy of the optimized BP neural network after applying high-frequency information training is 97.96%,which is 3.79%higher than that of the unoptimized BP neural network,and has higher detection accuracy.
基金National Natural Science Foundation of China(No.61371024)Aviation Science Fund of China(No.2013ZD53051)+2 种基金Aerospace Technology Support Fund of Chinathe Industry-Academy-Research Project of AVIC,China(No.cxy2013XGD14)the Open Research Project of Guangdong Key Laboratory of Popular High Performance Computers/Shenzhen Key Laboratory of Service Computing and Applications,China
文摘Electronic components' reliability has become the key of the complex system mission execution. Analog circuit is an important part of electronic components. Its fault diagnosis is far more challenging than that of digital circuit. Simulations and applications have shown that the methods based on BP neural network are effective in analog circuit fault diagnosis. Aiming at the tolerance of analog circuit,a combinatorial optimization diagnosis scheme was proposed with back propagation( BP) neural network( BPNN).The main contributions of this scheme included two parts:( 1) the random tolerance samples were added into the nominal training samples to establish new training samples,which were used to train the BP neural network based diagnosis model;( 2) the initial weights of the BP neural network were optimized by genetic algorithm( GA) to avoid local minima,and the BP neural network was tuned with Levenberg-Marquardt algorithm( LMA) in the local solution space to look for the optimum solution or approximate optimal solutions. The experimental results show preliminarily that the scheme substantially improves the whole learning process approximation and generalization ability,and effectively promotes analog circuit fault diagnosis performance based on BPNN.
文摘Feedforward Neural Network(FNN)is one of the most popular neural network models that is utilized to solve a wide range of nonlinear and complex problems.Several models such as stochastic gradient descent have been developed to train FNNs.However,they mainly suffer from falling into local optima leading to reduce the accuracy of FNNs.Moreover,the convergence speed of training process depends on the initial values of weights and biases in FNNs.Generally,these values are randomly determined by most of the training models.To deal with these issues,in this paper,we develop a novel evolutionary algorithm by modifying the original version of Whale Optimization Algorithm(WOA).To this end,a nonlinear function is introduced to improve the exploration and exploitation phases in the search process of WOA.Then,the modified WOA is applied to automatically obtain the initial values of weights and biases in FNN leading to reduce the probability of falling into local optima.In addition,the FNN model trained by the modified WOA is used to develop a classification approach for medical diagnosis problems.Ten medical diagnosis datasets are utilized to evaluate the efficiency of the proposed method.Also,four evaluation metrics including accuracy,AUC,specificity,and sensitivity are used in the experiments to compare the performance of classification models.The experimental results demonstrate that the proposed method is better than other competing classification models due to achieving higher values of accuracy,AUC,specificity,and sensitivity metrics for the used datasets.
基金supported by the National Natural Science Foundation of China(Nos.62265010,62061024)Gansu Province Science and Technology Plan(No.23YFGA0062)Gansu Province Innovation Fund(No.2022A-215)。
文摘The paper proposes a wireless sensor network(WSN)localization algorithm based on adaptive whale neural network and extended Kalman filtering to address the problem of excessive reliance on environmental parameters A and signal constant n in traditional signal propagation path loss models.This algorithm utilizes the adaptive whale optimization algorithm to iteratively optimize the parameters of the backpropagation(BP)neural network,thereby enhancing its prediction performance.To address the issue of low accuracy and large errors in traditional received signal strength indication(RSSI),the algorithm first uses the extended Kalman filtering model to smooth the RSSI signal values to suppress the influence of noise and outliers on the estimation results.The processed RSSI values are used as inputs to the neural network,with distance values as outputs,resulting in more accurate ranging results.Finally,the position of the node to be measured is determined by combining the weighted centroid algorithm.Experimental simulation results show that compared to the standard centroid algorithm,weighted centroid algorithm,BP weighted centroid algorithm,and whale optimization algorithm(WOA)-BP weighted centroid algorithm,the proposed algorithm reduces the average localization error by 58.23%,42.71%,31.89%,and 17.57%,respectively,validating the effectiveness and superiority of the algorithm.
基金supported by the Natural Science Foundation of China(Project No.51665052).
文摘With the continuous increase in the proportional use of wind energy across the globe,the reduction of power generation efficiency and safety hazards caused by the icing on wind turbine blades have attracted more consideration for research.Therefore,it is crucial to accurately analyze the thickness of icing on wind turbine blades,which can serve as a basis for formulating corresponding control measures and ensure a safe and stable operation of wind turbines in winter times and/or in high altitude areas.This paper fully utilized the advantages of the support vector machine(SVM)and back-propagation neural network(BPNN),with the incorporation of particle swarm optimization(PSO)algorithms to optimize the parameters of the SVM.The paper proposes a hybrid assessment model of PSO-SVM and BPNN based on dynamic weighting rules.Three sets of icing data under a rotating working state of the wind turbine were used as examples for model verification.Based on a comparative analysis with other models,the results showed that the proposed model has better accuracy and stability in analyzing the icing on wind turbine blades.
基金This paper is supported by the Nature Science Foundation of Heilongjiang Province.
文摘This paper introduced the Genetic Algorithms (GAs) and Artificial Neural Networks (ANNs), which have been widely used in optimization of allocating. The combination way of the two optimizing algorithms was used in board allocating of furniture production. In the experiment, the rectangular flake board of 3650 mm 1850 mm was used as raw material to allocate 100 sets of Table Bucked. The utilizing rate of the board reached 94.14 % and the calculating time was only 35 s. The experiment result proofed that the method by using the GA for optimizing the weights of the ANN can raise the utilizing rate of the board and can shorten the time of the design. At the same time, this method can simultaneously searched in many directions, thus greatly in-creasing the probability of finding a global optimum.
基金Project(41272137) supported by the National Natural Science Foundation of China
文摘Though traditional methods could recognize some facies, e.g. lagoon facies, backshoal facies and foreshoal facies, they couldn't recognize reef facies and shoal facies well. To solve this problem, back propagation neural network(BP-ANN) and an improved BP-ANN with better stability and suitability, optimized by a particle swarm optimizer(PSO) algorithm(PSO-BP-ANN) were proposed to solve the microfacies' auto discrimination of M formation from the R oil field in Iraq. Fourteen wells with complete core, borehole and log data were chosen as the standard wells and 120 microfacies samples were inferred from these 14 wells. Besides, the average value of gamma, neutron and density logs as well as the sum of squares of deviations of gamma were extracted as key parameters to build log facies(facies from log measurements)-microfacies transforming model. The total 120 log facies samples were divided into 12 kinds of log facies and 6 kinds of microfacies, e.g. lagoon bioclasts micrite limestone microfacies, shoal bioclasts grainstone microfacies, backshoal bioclasts packstone microfacies, foreshoal bioclasts micrite limestone microfacies, shallow continental micrite limestone microfacies and reef limestone microfacies. Furthermore, 68 samples of these 120 log facies samples were chosen as training samples and another 52 samples were gotten as testing samples to test the predicting ability of the discrimination template. Compared with conventional methods, like Bayes stepwise discrimination, both the BP-ANN and PSO-BP-ANN can integrate more log details with a correct rate higher than 85%. Furthermore, PSO-BP-ANN has more simple structure, smaller amount of weight and threshold and less iteration time.
基金Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2024R 343)PrincessNourah bint Abdulrahman University,Riyadh,Saudi ArabiaDeanship of Scientific Research at Northern Border University,Arar,Kingdom of Saudi Arabia,for funding this researchwork through the project number“NBU-FFR-2024-1092-02”.
文摘Phishing attacks present a persistent and evolving threat in the cybersecurity land-scape,necessitating the development of more sophisticated detection methods.Traditional machine learning approaches to phishing detection have relied heavily on feature engineering and have often fallen short in adapting to the dynamically changing patterns of phishingUniformResource Locator(URLs).Addressing these challenge,we introduce a framework that integrates the sequential data processing strengths of a Recurrent Neural Network(RNN)with the hyperparameter optimization prowess of theWhale Optimization Algorithm(WOA).Ourmodel capitalizes on an extensive Kaggle dataset,featuring over 11,000 URLs,each delineated by 30 attributes.The WOA’s hyperparameter optimization enhances the RNN’s performance,evidenced by a meticulous validation process.The results,encapsulated in precision,recall,and F1-score metrics,surpass baseline models,achieving an overall accuracy of 92%.This study not only demonstrates the RNN’s proficiency in learning complex patterns but also underscores the WOA’s effectiveness in refining machine learning models for the critical task of phishing detection.
基金supported by the Shanghai Sailing Program(No.19YF1419100,19YF1418900)。
文摘The parallel stabilized platform is an important equipment to ensure the stability of marine operations,which can effectively mitigate collisions of lifted goods.The 3UPU_UP parallel stabilized platform system is proposed,and the kinematics and dynamics of the 3UPU_UP parallel stabilized platform are researched,where U denotes universal joint;P denotes prismatic joint.The platform motion can be realized by controlling the actuators to realize compensation ship motion.While conventional control algorithms are difficult to cope with complex nonlinear systems,the optimization control method has been proposed.Based on the back propagation(BP)neural network proportional-integral-derivative(PID)controller,the particle swarm optimization(PSO)is combined with the BP neural network,and the combined PSO-BP PID controller optimization algorithm is introduced into the servo control system.Compared with classic PID and BP PID,the overshoot of PSO-BP PID to the response of step signal is reduced by 10.2%and 11.48%,respectively,and 0.36s and 0.17s reduce the time required to reach stable states.By comparing the reduction of the error under various sea conditions,the upper platform tracking error curve is flatter under a PID controller based on PSO-BP,the tracking motion is closer to the theoretical value and the control accuracy is improved.The maximum tracking error of the upper platform is smaller,the overall motion vibration of the platform is reduced,and the anti-interference ability is enhanced.The PSO-BP PID controller for wave compensated platform servo system control is more reasonable,more adaptable to the complex and changing environment.
基金supported by the National Natural Science Foundation of China(No.52388102)the Sichuan Science and Technology Program(No.2023ZDZX0008)China.The authors would like to thank the Guoneng Shuo-Huang Railway Development Company,China for providing vehicle parameters and line data for this project.The authors would also like to acknowledge the Xplorer Prize for sponsoring the project.
文摘Rail profile optimization is a critical strategy for mitigating wear and extending service life.However,damage at the wheel-rail contact surface goes beyond simple rail wear,as it also involves fatigue phenomena.Focusing solely on wear and not addressing fatigue in profile optimization can lead to the propagation of rail cracks,the peeling of material off the rail,and even rail fractures.Therefore,we propose an optimization approach that balances rail wear and fatigue for heavy-haul railway rails to mitigate rail fatigue damage.Initially,we performed a field investigation to acquire essential data and understand the characteristics of track damage.Based on theory and measured data,a simulation model for wear and fatigue was then established.Subsequently,the control points of the rail profile according to cubic non-uniform rational B-spline(NURBS)theory were set as the research variables.The rail’s wear rate and fatigue crack propagation rate were adopted as the objective functions.A multi-objective,multi-variable,and multi-constraint nonlinear optimization model was then constructed,specifically using a Levenberg Marquardt-back propagation neural network as optimized by the particle swarm optimization algorithm(PSO-LM-BP neural network).Ultimately,optimal solutions from the model were identified using a chaos microvariation adaptive genetic algorithm,and the effectiveness of the optimization was validated using a dynamics model and a rail damage model.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea Government(MSIT)(No.NRF-2018R1C1B5038818).
文摘Body Area Networks(BODYNETs)or Wireless Body Area Networks(WBAN),being an important type of ad-hoc network,plays a vital role in multimedia,safety,and traffic management applications.In BODYNETs,rapid topology changes occur due to high node mobility,which affects the scalability of the network.Node clustering is one mechanism among many others,which is used to overcome this issue in BODYNETs.There are many clustering algorithms used in this domain to overcome this issue.However,these algorithms generate a large number of Cluster Heads(CHs),which results in scarce resource utilization and degraded performance.In this research,an efficient clustering technique is proposed to handle these problems.The transmission range of BODYNET nodes is dynamically tuned accordingly as per their operational requirements.By optimizing the transmission range,the packet loss ratio is minimized,and link quality is improved,which leads to reduced energy consumption.To select optimal CHs the Whale Optimization Algorithm(WOA)is used based on their fitness,which enhances the network performance by reducing routing overhead.Our proposed scheme outclasses the existing state-of-the-art techniques,e.g.,Ant Colony Optimization(ACO),Gray Wolf Optimization(GWO),and Dragonfly Optimization Algorithm(DFA)in terms of energy consumption and cluster building time.
基金supported by the Hebei Province Innovation Capacity Improvement Program of China under Grant No.179676278Dthe Ministry of Education Fund Project of China under Grant No.2017A20004
文摘SDN (Software Defined Network) has many security problems, and DDoS attack is undoubtedly the most serious harm to SDN architecture network. How to accurately and effectively detect DDoS attacks has always been a difficult point and focus of SDN security research. Based on the characteristics of SDN, a DDoS attack detection method combining generalized entropy and PSOBP neural network is proposed. The traffic is pre-detected by the generalized entropy method deployed on the switch, and the detection result is divided into normal and abnormal. Locate the switch that issued the abnormal alarm. The controller uses the PSO-BP neural network to detect whether a DDoS attack occurs by further extracting the flow features of the abnormal switch. Experiments show that compared with other methods, the detection accurate rate is guaranteed while the CPU load of the controller is reduced, and the detection capability is better.
基金financially supported by the National High Technology Research and Development Program of China (No.2012AA062302)。
文摘In order to investigate the boron removal effect in slag refining process,intermediate frequency furnace was used to purify boron in SiO2-CaO-Na3 AlF6-CaSiO3 slag system at 1,550℃,and back propagation(BP)neural network was used to model the relationship between slag compositions and boron content in SiO2-CaO-Na3 AlF6-CaSiO3 slag system.The BP neural network predicted error is below 2.38%.The prediction results show that the slag composition has a significant influence on boron removal.Increasing the basicity of slag by adding CaO or Na3 AlF6 to CaSiO3-based slag could contribute to the boron removal,and the addition of Na3 AlF6 has a better removal effect in comparison with the addition of CaO.The oxidizing characteristic of CaSiO3 results in the ineffective removal with the addition of SiO2.The increase of oxygen potential(pO2)in the CaO-Na3 AlF6-CaSiO3 slag system by varying the SiO2 proportion can also contribute to the boron removal in silicon ingot.The best slag composition to remove boron was predicted by BP neural network using genetic algorithm(GA).The predicted results show that the mass fraction of boron in silicon reduces from 14.0000×10-6 to0.4366×10-6 after slag melting using 23.12%SiO2-10.44%CaO-16.83%Na3 AlF6-49.61%CaSiO3 slag system,close to the experimental boron content in silicon which is below 0.5×10-6.
基金supported by National Natural Science Foundation of China(U1930207)Key Project of National Natural Science Foundation of China(51790171)+2 种基金National Natural Science Foundation of China for Excellent Young Scholars(11722219)National Natural Science Foundation of China for Young Scholars(51905439)111 Project(B21013)。
文摘High-resolution laser additive manufacturing(LAM)significantly releases design free-dom,promoting the development of topology optimization(TO)and advancing structural design methods.In order to fully take advantage of voxelated forming methods and establish the quantitative relationship between the mechanical properties of printing components and multiple process factors(laser-and process-parameters),the concurrent optimization design method based on LAM should cover the process-performance relationship.This study proposes a novel artificial intelligence-facilitated TO method for LAM to concurrently design microscale material property and macroscale structural topology of 3D components by adopting heuristic and gradient-based algorithms.The process–structure–property relationship of selective laser sintering is established by the back propagation neural network,and it is integrated into the TO algorithm for providing a systematic design scheme of structural topology and process parameter.Compared with the classical optimization method,numerical examples show that this method is able to improve the mechanical performance of the macrostructure significantly.In addition,the collaborative design method is able to be widely applied for complex functional part design and optimization,as well as case studies on artificial intelligence-facilitated product evaluation.
文摘The prediction of wind speed is imperative nowadays due to the increased and effective generation of wind power.Wind power is the clean,free and conservative renewable energy.It is necessary to predict the wind speed,to implement wind power generation.This paper proposes a new model,named WT-GWO-BPNN,by integrating Wavelet Transform(WT),Back Propagation Neural Network(BPNN)and GreyWolf Optimization(GWO).The wavelet transform is adopted to decompose the original time series data(wind speed)into approximation and detailed band.GWO-BPNN is applied to predict the wind speed.GWO is used to optimize the parameters of back propagation neural network and to improve the convergence state.This work uses wind power data of six months with 25,086 data points to test and verify the performance of the proposed model.The proposed work,WT-GWO-BPNN,predicts the wind speed using a three-step procedure and provides better results.Mean Absolute Error(MAE),Mean Squared Error(MSE),Mean absolute percentage error(MAPE)and Root mean squared error(RMSE)are calculated to validate the performance of the proposed model.Experimental results demonstrate that the proposed model has better performance when compared to other methods in the literature.
文摘A significant advantage of medical image processing is that it allows non-invasive exploration of internal anatomy in great detail.It is possible to create and study 3D models of anatomical structures to improve treatment outcomes,develop more effective medical devices,or arrive at a more accurate diagnosis.This paper aims to present a fused evolutionary algorithm that takes advantage of both whale optimization and bacterial foraging optimization to optimize feature extraction.The classification process was conducted with the aid of a convolu-tional neural network(CNN)with dual graphs.Evaluation of the performance of the fused model is carried out with various methods.In the initial input Com-puter Tomography(CT)image,150 images are pre-processed and segmented to identify cancerous and non-cancerous nodules.The geometrical,statistical,struc-tural,and texture features are extracted from the preprocessed segmented image using various methods such as Gray-level co-occurrence matrix(GLCM),Histo-gram-oriented gradient features(HOG),and Gray-level dependence matrix(GLDM).To select the optimal features,a novel fusion approach known as Whale-Bacterial Foraging Optimization is proposed.For the classification of lung cancer,dual graph convolutional neural networks have been employed.A com-parison of classification algorithms and optimization algorithms has been con-ducted.According to the evaluated results,the proposed fused algorithm is successful with an accuracy of 98.72%in predicting lung tumors,and it outper-forms other conventional approaches.
基金Project (No. 60721062) supported by the National Creative Research Groups Science Foundation of China
文摘Based on the critical position of the endpoint quality prediction for basic oxygen furnaces （BOFs） in steelmaking, and the latest results in computational intelligence （C1）, this paper deals with the development of a novel memetic algorithm （MA） for neural network （NN） lcarnmg. Included in this is the integration of extremal optimization （EO） and Levenberg-Marquardt （LM） pradicnt search, and its application in BOF endpoint quality prediction. The fundamental analysis reveals that the proposed EO-LM algorithm may provide superior performance in generalization, computation efficiency, and avoid local minima, compared to traditional NN learning methods. Experimental results with production-scale BOF data show that the proposed method can effectively improve the NN model for BOF endpoint quality prediction.
文摘Dynamic analysis of scissor hydraulic lift platform has been performed to invest/gate the key factors which determine size and shape of the platfolan. By using MATLAB, the position of hydraulic cylinder has been optimized to reduce jacking force of piston and the whole system. Thus structure deformation decreases which is beneficial to control accuracy. Additionally, a new proportion integration differentiation （PID） control mode based on BP neural network has been developed to improve the stability and accuracy for the pasitio^L control in this system. Compared with existing PID tuning meth~~ls and fuzzy self-adjusted PID controllers, the proposed back propagation （BP） based PID controller can achieve better performance for a wide range of complex processes and realize self-tuning of parameters. It was confirmed that the performance of the lift platform regarding the force variation and position accuracy was greatly enhanced by optimizing of the system both in structure and control. Considerable economic benefit can also be achieved thrangh the application of this intelligent PID system.
基金supported by the National Natural Science Foundation of China under Grant 52077027.
文摘The permanent magnet eddy current coupler(PMEC)solves the problem of flexible connection and speed regulation between the motor and the load and is widely used in electrical transmission systems.It provides torque to the load and generates heat and losses,reducing its energy transfer efficiency.This issue has become an obstacle for PMEC to develop toward a higher power.This paper aims to improve the overall performance of PMEC through multi-objective optimization methods.Firstly,a PMEC modeling method based on the Levenberg-Marquardt back propagation(LMBP)neural network is proposed,aiming at the characteristics of the complex input-output relationship and the strong nonlinearity of PMEC.Then,a novel competition mechanism-based multi-objective particle swarm optimization algorithm(NCMOPSO)is proposed to find the optimal structural parameters of PMEC.Chaotic search and mutation strategies are used to improve the original algorithm,which improves the shortcomings of multi-objective particle swarm optimization(MOPSO),which is too fast to converge into a global optimum,and balances the convergence and diversity of the algorithm.In order to verify the superiority and applicability of the proposed algorithm,it is compared with several popular multi-objective optimization algorithms.Applying them to the optimization model of PMEC,the results show that the proposed algorithm has better comprehensive performance.Finally,a finite element simulation model is established using the optimal structural parameters obtained by the proposed algorithm to verify the optimization results.Compared with the prototype,the optimized PMEC has reduced eddy current losses by 1.7812 kW,increased output torque by 658.5 N·m,and decreased costs by 13%,improving energy transfer efficiency.
