In the wave of intelligent transformation in the textile printing and dyeing industry,Changzhou Hongda Intelligence Technology Co.,Ltd.stands as a leading enterprise specializing in online inspection equipment and int...In the wave of intelligent transformation in the textile printing and dyeing industry,Changzhou Hongda Intelligence Technology Co.,Ltd.stands as a leading enterprise specializing in online inspection equipment and intelligent digital production lines.The company boasts strong independent innovation capabilities and internationally advanced technologies.With core strengths rooted in a deep understanding and research of smart manufacturing for the industry,Hongda possesses cutting-edge expertise in machine vision,artificial intelligence,digital twin,and automation technologies.It leads the development of intelligent manufacturing in textile printing and dyeing and has become an industry benchmark.展开更多
In order to study the propulsive force on the water-jet to the flying weft in water-jet looms, a dynamic model has been established. Based on the analysis and example testing, an experiential formula of the propulsive...In order to study the propulsive force on the water-jet to the flying weft in water-jet looms, a dynamic model has been established. Based on the analysis and example testing, an experiential formula of the propulsive force of the water-jet to the flying weft is obtained for the first time. The formula will profit the further research of the water-jet weft insertion and the production of textile.展开更多
On the basis of the analysis of typical orthogonal crankrocking lever spatial mechanism for the weft insertion in rapier looms, the rules of the outputting lever motion and the mechanism pressure-angle variety are stu...On the basis of the analysis of typical orthogonal crankrocking lever spatial mechanism for the weft insertion in rapier looms, the rules of the outputting lever motion and the mechanism pressure-angle variety are studied when the maximum swing angle of rocking lever and the length of outputting lever have different values, and the optimum parameters suitable for motion transmission can be chosen. At the same time some existing shortpoints of the mechanism are also pointed out.展开更多
A novel weft insertion mechanism named eccentric conjugate non-circular gear & crank-rocker & gears train weft insertion mechanism was proposed in order to better meet the requirements of rapier loom's wef...A novel weft insertion mechanism named eccentric conjugate non-circular gear & crank-rocker & gears train weft insertion mechanism was proposed in order to better meet the requirements of rapier loom's weft insertion mechanism as well as reduce the manufacturing difficulty. Meanwhile, based on the working principle of this mechanism, kinematical mathematic models of this mechanism were established and an aided analysis and simulation software was compiled. The influences of eccentricity ratio, deformation coefficient, and other important parameters on the kinematics characteristics of this mechanism were analyzed by using the software. A group of preferable parameters which could meet the requirements of weft insertion technology were obtained by means of human-computer interactive optimization method. The maximum velocity, maximum acceleration, and variation of acceleration of this mechanism are smaller than those of the conjugate cam weft insertion mechanism applied on TT96 rapier loom under the conditions of the same unilateral total stroke of rapier head and the same rotary speed of loom spindle; meanwhile the other demands of weaving technology can be met by this novel weft insertion mechanism.展开更多
Seven kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/epoxy composite laminates. Tensile tests were carried out to examine and compare the mechanical properties in course...Seven kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/epoxy composite laminates. Tensile tests were carried out to examine and compare the mechanical properties in course and wale direction of these composites. On the basis of experimental results, attempts have been made to analyze some main factors influencing stress-strain curve, ultimate tensile strength and initial elastic modulus of specimens.展开更多
By analyzing a combined and spatial 6-bar linkage weft insertion mechanism, its practical model for optimization design is set up and the modification of penalty strategy is put forward so that the genetic algorithm c...By analyzing a combined and spatial 6-bar linkage weft insertion mechanism, its practical model for optimization design is set up and the modification of penalty strategy is put forward so that the genetic algorithm can be better used in optimization design for mechanisms with non- linear constraints. The design result is discussed.展开更多
A new theory and method that differs from the tradition-al single plated weft - knitting theory and method hasbeen expounded after theoretical analyzing and experi-mental proving. If the new method is used when platin...A new theory and method that differs from the tradition-al single plated weft - knitting theory and method hasbeen expounded after theoretical analyzing and experi-mental proving. If the new method is used when platingstitch is knitted on large diameter weft knitting machine,the thorny problem of long standing that ground yarn iseasy to appear on the face side of fabric is solved. Thenew method, i.e, the production of physical ability oftraining uniform for serviceman has been used.展开更多
Weft knitted fancy fabrics are widely used in knitted garment design. Due to the complexity of the structures, their modeling and simulation needs to be solved in three-dimensional (3D) CAD developments. In this paper...Weft knitted fancy fabrics are widely used in knitted garment design. Due to the complexity of the structures, their modeling and simulation needs to be solved in three-dimensional (3D) CAD developments. In this paper, 3D loop geometrical models of weft knitted fancy structures, including tuck stitch, jacquard stitch, transfer stitch and fleecy stitch, were developed based on an improved model of plain loop, and their central axes as some 3D space curves were achieved by using Non-Uniform Rational B-Splines (NURBS). The 3D visual simulation programme was written in C++ programming language using OpenGL, which was a function library of 3D graphics. Some examples of weft knitted fancy fabrics were generated and practical application of 3D simulation was discussed.展开更多
In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given...In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given,and the mathematical model of reverse solution for this mechanism was established.The parameters of this mechanism were obtained by reverse solution on the basis of the given ideal kinematic curves and kinematic requirements.The parametric design platform which was integrated with the functions of parametric reverse solution,motion simulation,three-dimensional modeling and virtual assembly was developed based on VB.NET and Unigraphics(UG) NX.After entering the technological parameters of weft insertion process and essential structural parameters by users,three-dimensional drawing of the main parts such as the conjugate cam and shaft,can be obtained by this platform,also the processing data of the cam can be calculated.This platform provides a rapid approach for parametric design of weft insertion mechanism.展开更多
For the purpose of obtaining satisfactory performance of the non-circular gear & crank-rocker & gear trains (NCCRG) weft insertion mechanism which was proposed in this paper, the ideal kinematic curve of this ...For the purpose of obtaining satisfactory performance of the non-circular gear & crank-rocker & gear trains (NCCRG) weft insertion mechanism which was proposed in this paper, the ideal kinematic curve of this weft insertion mechanism was given, and the reverse solution models of this mechanism were established. A reverse design and simulation software was compiled based on Visual Basic 6.0 to obtain the mechanism parameters, including the pitch curves and tooth profiles of the non-circular gears. A test-bed of this mechanism was developed according to these parameters. The kinematic performance of this weft insertion mechanism was tested by high-speed video tape recorder with its corresponding video analytical software Blaster's MAS. And the test results were identical with the theoretical calculation. Compared with the conjugate cam weft insertion mechanism which is applied on TT96 rapier loom, under the condition of same weft insertion rate, the variation of acceleration of this mechanism is smaller. This novel weft insertion mechanism can meet the requirements of weft insertion on rapier looms with smooth and steady motion.展开更多
Several different kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/polyester composite laminates. Flexural tests were carried out to examine stress- deflection process and...Several different kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/polyester composite laminates. Flexural tests were carried out to examine stress- deflection process and compare the mechanical properties in course and wale directions of these composites. The experimental results indicate that the numbers of load-bearing yarn in course and wale direction and the fabric density are the main factors influencing the ultimate tensile strength and initial elastic modulus of specimens.展开更多
A 3D model of the spatial four-bar weft insertion mechanism was built with unigraphics NX(UG) according to the actual requirement,and dynamics simulation was carried out by importing the model into ADAMS.Without consi...A 3D model of the spatial four-bar weft insertion mechanism was built with unigraphics NX(UG) according to the actual requirement,and dynamics simulation was carried out by importing the model into ADAMS.Without considering the clearance,the motion characteristic curve of the sword belt was generated through ADAMS combined with MATLAB.In this paper the hinge between the rod and the sector gear was selected as an example with different values of clearance,outputting the motion characteristic curve of the sword belt.Finite element analysis(FEA)was conducted,the flexible body was generated by importing the forked frame into ANSYS,and flexible dynamics simulation was carried out by importing the flexible body into ADAMS to replace the rigid rod.A comprehensive comparison of the output characteristics of the sword belt was conducted in the consideration of the clearance or flexible.Analysis of the force on the left hinge of the rod was carried out with the ADAMS post processing module.With the same clearance,considering the flexibility,amplitude of fluctuation of the force on the hinge increased obviously.展开更多
This paper is focused on change in shrinkage, GSM, Wales per Inch and Course per Inch due to structure and count variation and state variation. This work was carried out with 12 samples of single jersey, single lacost...This paper is focused on change in shrinkage, GSM, Wales per Inch and Course per Inch due to structure and count variation and state variation. This work was carried out with 12 samples of single jersey, single lacoste and weft lock knit fabrics of different counts which were scoured with NaOH. After pretreatment process the samples were tested for widthwise shrinkage, width, GSM, Wales per Inch and Course per Inch and compared between different states like grey state and finished state. The result obtained in this research indicated that physical properties like structures with tuck stitch possess higher value of widthwise shrinkage, width, GSM and Wales per Inch and Course per Inch value lowers prominently in those structures having float or miss stitches. In both cases i.e. grey state and RFD state values of those properties are high in coarser yarn and low in finer yarn. During project knitted fabrics specification along with machine specification and major factors which are necessary to calculate different types of variation and variables on which the whole fabric construction depends were managed to watch carefully. Main efforts were to develop a dependable way so that the resulting fabric specifications with required configuration can be easily visualized and be forecasted. A great emphasization was provided to the adjustable points on which fabric GSM, stitch length, fabric width and shrinkage percentage directly or indirectly depends.展开更多
This paper introduces the construction of the multi-layered biaxial weft knitted fabric （MBWK fabric） and studies the locking angle of this kind of fabric. Moreover, a locking angle model of the MBWK fabric is estab...This paper introduces the construction of the multi-layered biaxial weft knitted fabric （MBWK fabric） and studies the locking angle of this kind of fabric. Moreover, a locking angle model of the MBWK fabric is established for the first time according to its unique construction. Two kinds of locking angles are considered under different restraint conditions: the locking angle θ1 controlled by the inserting yarns and the locking angle θ2 controlled by the stitch yarns. It is concluded that the ultimate value of the locking angle θ is the larger one of the two angles.展开更多
With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we...With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we designed three-dimensional woven spacer fabrics(3DWSFs)and 3DWSCs with the weft V-shape to improve the compression performance of traditional 3DWSFs.The effects of weft binding structures,V-pile densities,and V-shaped angle were investigated in this paper.It is found that the compression resistance of 3DWSFs with the weft V-shape is improved compared to that with the weft I-shape,the fabric height recovery rate is as high as 95.7%,and the average elastic recovery rate is 59.39%.When the interlayer pile yarn density is the same,the weft V-shaped and weft I-shaped 3DWSCs have similar flatwise pressure and edgewise pressure performance.The compression properties of the composite improve as the density of the V-pile yarns increases.The flatwise compression load decreases as the V-shaped angle decreases.When the V-shaped angle is 28°and 42°,the latitudinal V-shaped 3DWSCs perform exceptionally well in terms of anti-compression cushioning.The V-shaped weft binding method offers a novel approach to structural design of 3DWSCs.展开更多
In order to realize parametric simulation of three-dimensional(3D)fabric structure based on web,a 3D model describing a plain knitted fabric,in which the cross-section of the yarn is circular shape and the path of the...In order to realize parametric simulation of three-dimensional(3D)fabric structure based on web,a 3D model describing a plain knitted fabric,in which the cross-section of the yarn is circular shape and the path of the yarn is cubic B-spline curve,is proposed in this paper.With this model,the 3D simulation of the loop and of the basic structures of the knitted fabric is realized by using Virtual Reality Modeling Language(VRML).The virtual simulation scene is suitable for network transmission with freely available VRML browsers and can be translated,scaled and rotated quite arbitrarily.By using Java and External Authoring Interface(EAI)technology,the web-based interactive simulation platform of weft knitted fabric is established.The user can input type of structures,basic fabric parameters,and yarn colors interactively to obtain a more realistic simulation result in real-time.A new approach is provided to imitate the knitted fabric 3D appearance on network.展开更多
In this paper the significance analysis has been made of the factors influencing the yarn appearing of single plated weft-knit fabrics knitted on large diameter machine by a mathematical statistical method. By means o...In this paper the significance analysis has been made of the factors influencing the yarn appearing of single plated weft-knit fabrics knitted on large diameter machine by a mathematical statistical method. By means of orthogonal test and variance analysis, it is known that the feeding tension is the significant factor influencing the yarn appearance and the ground yarn tension should be larger than the face yarn tension. Through comparison, it is also known that the drawing off force should be regulated suitably, the carrier should be near the first closed needle, and the sinker should be out late slightly.展开更多
The work investigated surface and mechanical properties of untreated and treated three-layered weftknitted spacer fabrics.In order to optimize the mechanical properties of weft-knitted spacer fabrics,silica aerogels(S...The work investigated surface and mechanical properties of untreated and treated three-layered weftknitted spacer fabrics.In order to optimize the mechanical properties of weft-knitted spacer fabrics,silica aerogels(SAs)coating was employed.Scanning electron microscopy(SEM)images of untreated and treated spacer fabrics were analyzed to ensure the presence of SAs on the coated spacer fabrics.The basic properties of uncoated and coated weftknitted spacer fabrics were studied and compared.Tensile strength and initial modulus were studied according to the GB/T3923 test standard YG026 MB-250 by testing machine.Moreover,compression properties of spacer fabrics were also tested by HD026 G test instrument.In this testing,work of compression,the linearity of compression,recovery work of compression and other parameters were calculated from stress and strain curves.It was found that SAs coating has a significant influence on the mechanical properties of weftknitted spacer fabrics.The statistical analysis also verified the significant performance(P value smaller than 0.05)of treated fabric samples at the 0.05 level.展开更多
This paper was to develop a weft-knitted stent coated by a drng-loaded electro-spun fibrous membrane and then investigate its morphology, mechan/cal properties and in vitro drug release property. This work was started...This paper was to develop a weft-knitted stent coated by a drng-loaded electro-spun fibrous membrane and then investigate its morphology, mechan/cal properties and in vitro drug release property. This work was started by weft-knitting of an inner layer of such stent using polydioxanone （PDO） and silkf＇dment. Subsequently, 5-fluorouracil （5-FU） and curcnmin（CUR） loaded silk fibroin （SF） membranes were coated on the surface of the weft- knitted stent using electro-spinning technique to endow the drug delivery funct/on of the stent. The results show that the radial compression strength and c/renmferentlal expanding strength can reach above （9.1±0.4） cN/cm2 and （205.0± 0.2） cN/mm, respectively. The drug releasing behaviors can be sustained for 400 h. It is concluded that the stents have potential application as anintestinal stent in the future.展开更多
文摘In the wave of intelligent transformation in the textile printing and dyeing industry,Changzhou Hongda Intelligence Technology Co.,Ltd.stands as a leading enterprise specializing in online inspection equipment and intelligent digital production lines.The company boasts strong independent innovation capabilities and internationally advanced technologies.With core strengths rooted in a deep understanding and research of smart manufacturing for the industry,Hongda possesses cutting-edge expertise in machine vision,artificial intelligence,digital twin,and automation technologies.It leads the development of intelligent manufacturing in textile printing and dyeing and has become an industry benchmark.
文摘In order to study the propulsive force on the water-jet to the flying weft in water-jet looms, a dynamic model has been established. Based on the analysis and example testing, an experiential formula of the propulsive force of the water-jet to the flying weft is obtained for the first time. The formula will profit the further research of the water-jet weft insertion and the production of textile.
文摘On the basis of the analysis of typical orthogonal crankrocking lever spatial mechanism for the weft insertion in rapier looms, the rules of the outputting lever motion and the mechanism pressure-angle variety are studied when the maximum swing angle of rocking lever and the length of outputting lever have different values, and the optimum parameters suitable for motion transmission can be chosen. At the same time some existing shortpoints of the mechanism are also pointed out.
基金National Natural Science Foundation of China(No.50875243)
文摘A novel weft insertion mechanism named eccentric conjugate non-circular gear & crank-rocker & gears train weft insertion mechanism was proposed in order to better meet the requirements of rapier loom's weft insertion mechanism as well as reduce the manufacturing difficulty. Meanwhile, based on the working principle of this mechanism, kinematical mathematic models of this mechanism were established and an aided analysis and simulation software was compiled. The influences of eccentricity ratio, deformation coefficient, and other important parameters on the kinematics characteristics of this mechanism were analyzed by using the software. A group of preferable parameters which could meet the requirements of weft insertion technology were obtained by means of human-computer interactive optimization method. The maximum velocity, maximum acceleration, and variation of acceleration of this mechanism are smaller than those of the conjugate cam weft insertion mechanism applied on TT96 rapier loom under the conditions of the same unilateral total stroke of rapier head and the same rotary speed of loom spindle; meanwhile the other demands of weaving technology can be met by this novel weft insertion mechanism.
文摘Seven kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/epoxy composite laminates. Tensile tests were carried out to examine and compare the mechanical properties in course and wale direction of these composites. On the basis of experimental results, attempts have been made to analyze some main factors influencing stress-strain curve, ultimate tensile strength and initial elastic modulus of specimens.
文摘By analyzing a combined and spatial 6-bar linkage weft insertion mechanism, its practical model for optimization design is set up and the modification of penalty strategy is put forward so that the genetic algorithm can be better used in optimization design for mechanisms with non- linear constraints. The design result is discussed.
文摘A new theory and method that differs from the tradition-al single plated weft - knitting theory and method hasbeen expounded after theoretical analyzing and experi-mental proving. If the new method is used when platingstitch is knitted on large diameter weft knitting machine,the thorny problem of long standing that ground yarn iseasy to appear on the face side of fabric is solved. Thenew method, i.e, the production of physical ability oftraining uniform for serviceman has been used.
基金Natural Science Foundation of Tianjin,China( No. 11JCYBJC26400) Tianjin High School Scientific and Technology Fund Planning Project,China( No. 20100310)
文摘Weft knitted fancy fabrics are widely used in knitted garment design. Due to the complexity of the structures, their modeling and simulation needs to be solved in three-dimensional (3D) CAD developments. In this paper, 3D loop geometrical models of weft knitted fancy structures, including tuck stitch, jacquard stitch, transfer stitch and fleecy stitch, were developed based on an improved model of plain loop, and their central axes as some 3D space curves were achieved by using Non-Uniform Rational B-Splines (NURBS). The 3D visual simulation programme was written in C++ programming language using OpenGL, which was a function library of 3D graphics. Some examples of weft knitted fancy fabrics were generated and practical application of 3D simulation was discussed.
基金National Natural Science Foundation of China (No.50875243)Natural Science Foundation of Zhejiang Province,China (No.Y1110100)
文摘In order to realize the parametric design of the conjugate cam weft insertion mechanism,according to the necessary parameters of weft insertion process,ideal kinematic curves of the weft insertion mechanism were given,and the mathematical model of reverse solution for this mechanism was established.The parameters of this mechanism were obtained by reverse solution on the basis of the given ideal kinematic curves and kinematic requirements.The parametric design platform which was integrated with the functions of parametric reverse solution,motion simulation,three-dimensional modeling and virtual assembly was developed based on VB.NET and Unigraphics(UG) NX.After entering the technological parameters of weft insertion process and essential structural parameters by users,three-dimensional drawing of the main parts such as the conjugate cam and shaft,can be obtained by this platform,also the processing data of the cam can be calculated.This platform provides a rapid approach for parametric design of weft insertion mechanism.
基金National Natural Science Foundation of China(No.50875243)
文摘For the purpose of obtaining satisfactory performance of the non-circular gear & crank-rocker & gear trains (NCCRG) weft insertion mechanism which was proposed in this paper, the ideal kinematic curve of this weft insertion mechanism was given, and the reverse solution models of this mechanism were established. A reverse design and simulation software was compiled based on Visual Basic 6.0 to obtain the mechanism parameters, including the pitch curves and tooth profiles of the non-circular gears. A test-bed of this mechanism was developed according to these parameters. The kinematic performance of this weft insertion mechanism was tested by high-speed video tape recorder with its corresponding video analytical software Blaster's MAS. And the test results were identical with the theoretical calculation. Compared with the conjugate cam weft insertion mechanism which is applied on TT96 rapier loom, under the condition of same weft insertion rate, the variation of acceleration of this mechanism is smaller. This novel weft insertion mechanism can meet the requirements of weft insertion on rapier looms with smooth and steady motion.
文摘Several different kinds of weft knitted fabrics from glass fiber yarns were used as reinforcement to make fabric/polyester composite laminates. Flexural tests were carried out to examine stress- deflection process and compare the mechanical properties in course and wale directions of these composites. The experimental results indicate that the numbers of load-bearing yarn in course and wale direction and the fabric density are the main factors influencing the ultimate tensile strength and initial elastic modulus of specimens.
基金National Natural Science Foundation of China(No.51175475)Natural Science Foundation of Zhejiang Province,China(No.LY14E050027)
文摘A 3D model of the spatial four-bar weft insertion mechanism was built with unigraphics NX(UG) according to the actual requirement,and dynamics simulation was carried out by importing the model into ADAMS.Without considering the clearance,the motion characteristic curve of the sword belt was generated through ADAMS combined with MATLAB.In this paper the hinge between the rod and the sector gear was selected as an example with different values of clearance,outputting the motion characteristic curve of the sword belt.Finite element analysis(FEA)was conducted,the flexible body was generated by importing the forked frame into ANSYS,and flexible dynamics simulation was carried out by importing the flexible body into ADAMS to replace the rigid rod.A comprehensive comparison of the output characteristics of the sword belt was conducted in the consideration of the clearance or flexible.Analysis of the force on the left hinge of the rod was carried out with the ADAMS post processing module.With the same clearance,considering the flexibility,amplitude of fluctuation of the force on the hinge increased obviously.
文摘This paper is focused on change in shrinkage, GSM, Wales per Inch and Course per Inch due to structure and count variation and state variation. This work was carried out with 12 samples of single jersey, single lacoste and weft lock knit fabrics of different counts which were scoured with NaOH. After pretreatment process the samples were tested for widthwise shrinkage, width, GSM, Wales per Inch and Course per Inch and compared between different states like grey state and finished state. The result obtained in this research indicated that physical properties like structures with tuck stitch possess higher value of widthwise shrinkage, width, GSM and Wales per Inch and Course per Inch value lowers prominently in those structures having float or miss stitches. In both cases i.e. grey state and RFD state values of those properties are high in coarser yarn and low in finer yarn. During project knitted fabrics specification along with machine specification and major factors which are necessary to calculate different types of variation and variables on which the whole fabric construction depends were managed to watch carefully. Main efforts were to develop a dependable way so that the resulting fabric specifications with required configuration can be easily visualized and be forecasted. A great emphasization was provided to the adjustable points on which fabric GSM, stitch length, fabric width and shrinkage percentage directly or indirectly depends.
文摘This paper introduces the construction of the multi-layered biaxial weft knitted fabric （MBWK fabric） and studies the locking angle of this kind of fabric. Moreover, a locking angle model of the MBWK fabric is established for the first time according to its unique construction. Two kinds of locking angles are considered under different restraint conditions: the locking angle θ1 controlled by the inserting yarns and the locking angle θ2 controlled by the stitch yarns. It is concluded that the ultimate value of the locking angle θ is the larger one of the two angles.
基金Fundamental Research Funds for the Central Universities,China(Nos.2232022D-11 and 22D128102/007)Jiangsu Transformation and Upgrading Funding Program for Industrial and Information Industry,ChinaShanghai Natural Science Foundation of Shanghai Municipal Science and Technology Commission,China(No.20ZR1401600)。
文摘With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we designed three-dimensional woven spacer fabrics(3DWSFs)and 3DWSCs with the weft V-shape to improve the compression performance of traditional 3DWSFs.The effects of weft binding structures,V-pile densities,and V-shaped angle were investigated in this paper.It is found that the compression resistance of 3DWSFs with the weft V-shape is improved compared to that with the weft I-shape,the fabric height recovery rate is as high as 95.7%,and the average elastic recovery rate is 59.39%.When the interlayer pile yarn density is the same,the weft V-shaped and weft I-shaped 3DWSCs have similar flatwise pressure and edgewise pressure performance.The compression properties of the composite improve as the density of the V-pile yarns increases.The flatwise compression load decreases as the V-shaped angle decreases.When the V-shaped angle is 28°and 42°,the latitudinal V-shaped 3DWSCs perform exceptionally well in terms of anti-compression cushioning.The V-shaped weft binding method offers a novel approach to structural design of 3DWSCs.
基金Jiangsu Natural Science Foundation of University,China(No.07KJD540178)Foundation of Nantong Science and Technology of China(No.K2007009)Graduate Innovation Project of Nantong University,China(No.YKC09056)
文摘In order to realize parametric simulation of three-dimensional(3D)fabric structure based on web,a 3D model describing a plain knitted fabric,in which the cross-section of the yarn is circular shape and the path of the yarn is cubic B-spline curve,is proposed in this paper.With this model,the 3D simulation of the loop and of the basic structures of the knitted fabric is realized by using Virtual Reality Modeling Language(VRML).The virtual simulation scene is suitable for network transmission with freely available VRML browsers and can be translated,scaled and rotated quite arbitrarily.By using Java and External Authoring Interface(EAI)technology,the web-based interactive simulation platform of weft knitted fabric is established.The user can input type of structures,basic fabric parameters,and yarn colors interactively to obtain a more realistic simulation result in real-time.A new approach is provided to imitate the knitted fabric 3D appearance on network.
文摘In this paper the significance analysis has been made of the factors influencing the yarn appearing of single plated weft-knit fabrics knitted on large diameter machine by a mathematical statistical method. By means of orthogonal test and variance analysis, it is known that the feeding tension is the significant factor influencing the yarn appearance and the ground yarn tension should be larger than the face yarn tension. Through comparison, it is also known that the drawing off force should be regulated suitably, the carrier should be near the first closed needle, and the sinker should be out late slightly.
文摘The work investigated surface and mechanical properties of untreated and treated three-layered weftknitted spacer fabrics.In order to optimize the mechanical properties of weft-knitted spacer fabrics,silica aerogels(SAs)coating was employed.Scanning electron microscopy(SEM)images of untreated and treated spacer fabrics were analyzed to ensure the presence of SAs on the coated spacer fabrics.The basic properties of uncoated and coated weftknitted spacer fabrics were studied and compared.Tensile strength and initial modulus were studied according to the GB/T3923 test standard YG026 MB-250 by testing machine.Moreover,compression properties of spacer fabrics were also tested by HD026 G test instrument.In this testing,work of compression,the linearity of compression,recovery work of compression and other parameters were calculated from stress and strain curves.It was found that SAs coating has a significant influence on the mechanical properties of weftknitted spacer fabrics.The statistical analysis also verified the significant performance(P value smaller than 0.05)of treated fabric samples at the 0.05 level.
基金National Natural Science Foundation of China(No.51603140)Natural Science Foundation of Jiangsu Province,China(No.BK20150372)+2 种基金University Science Research Project of Jiangsu Province,China(No.16KJB540003)Key Industry Technology Innovation,Science and Technology Project of Suzhou,China(No.SYG201638)Sino-Germany Joint Project,China(No.GZ1094)
文摘This paper was to develop a weft-knitted stent coated by a drng-loaded electro-spun fibrous membrane and then investigate its morphology, mechan/cal properties and in vitro drug release property. This work was started by weft-knitting of an inner layer of such stent using polydioxanone （PDO） and silkf＇dment. Subsequently, 5-fluorouracil （5-FU） and curcnmin（CUR） loaded silk fibroin （SF） membranes were coated on the surface of the weft- knitted stent using electro-spinning technique to endow the drug delivery funct/on of the stent. The results show that the radial compression strength and c/renmferentlal expanding strength can reach above （9.1±0.4） cN/cm2 and （205.0± 0.2） cN/mm, respectively. The drug releasing behaviors can be sustained for 400 h. It is concluded that the stents have potential application as anintestinal stent in the future.
