A fluid sensor based on the surface transverse wave (STW) delay line on ST-cut quartz has been developed and tested in a large number of fluids with different viscosity and permittivity levels.Influence of fluid mech...A fluid sensor based on the surface transverse wave (STW) delay line on ST-cut quartz has been developed and tested in a large number of fluids with different viscosity and permittivity levels.Influence of fluid mechanical and electrical properties on the sensor's response has been determined and the sensor's performance has been compared with a bulk acoustic wave (BAW) viscosity sensor.The result shows that the viscosity sensitivity of the developed STW sensor represented by the signal to noise ratio is lower than that of a 5 MHz BAW sensor.Applications of the sensor in detecting the quality of industrial fluids are discussed.展开更多
We report the first use of organic semiconductors （OSCs）-coated PAN nanofibrous mats as highly responsive fluorescence quenching-based chemosensors for 2,4,6-trinitrotoluene （TNT） and H2O2 detection in vapor phase...We report the first use of organic semiconductors （OSCs）-coated PAN nanofibrous mats as highly responsive fluorescence quenching-based chemosensors for 2,4,6-trinitrotoluene （TNT） and H2O2 detection in vapor phase. Conjugated polymers, poly（triphenylaminealt-biphenylene vinylene） （TPA- PBPV）, and small organic molecules, l-horonic-ester pyrene and 1,6-bisboron-ester pyrene, were coated onto the nanofibers fabricated by electrospinning. By introducing the nanofibers structure, a 9-fold fluorescence intensity enhancement and a 14-fold sensitivity enhancement were achieved, which could be attributed to its high area-to-volume ratio, excellent gas permeability, and more importantly, the evanescent-wave effect occurred once the diameters of the fibers were small enough. Since the organic semiconductors coated onto the nanofibrous mats could be replaced by other functional materials, the nanofibers-enhanced detection strategies could be extended to more general domains including chemical and environmental detection.展开更多
The interdigital transducer (IDT) can excite Lamb wave in a piezoelectric plate loading with a liquid layer, and the phase velocity of Lamb wave is associated with the properties of the liquid layer. In this paper, th...The interdigital transducer (IDT) can excite Lamb wave in a piezoelectric plate loading with a liquid layer, and the phase velocity of Lamb wave is associated with the properties of the liquid layer. In this paper, the concept of effective permittivity is introduced to study the Lamb wave's potential application in liquid sensing. Considering the measuring of ideal nonviscous liquid, the sensors array is designed to sense the density and the dielectric constant of the liquid layer simultaneously. Using LiNbO3 as piezoelectric material, in order to improve the sensors array sensitivity and the electro-mechanical coupling coefficient, the optimized results including plate thicknesses and cut orientations are presented by numerical simulation. These studies show that the Lamb wave sensors array can be potential in liquid sensing.展开更多
ZnO films on R-sapphire substrates are prepared and characterized by x-ray diffraction and scanning electron microscopy, which indicate that the thin films are well crystallized with （1120） texture. Love wave and Ra...ZnO films on R-sapphire substrates are prepared and characterized by x-ray diffraction and scanning electron microscopy, which indicate that the thin films are well crystallized with （1120） texture. Love wave and Rayleigh wave are used for fabrications of humidity sensors, which are excited in [1100] and [0001] directions of the （1120） ZnO piezoelectric films, respectively. The experimental results show that both kinds of sensors have good humidity response and repeatability, and the performances of the Love wave sensors are better than those of the Rayleigh wave sensors at room temperature. Moreover, the theoretical calculations of the mass sensitivity of the sensors are a/so carried out and the calculated results are in good agreement with the experimental measurements.展开更多
In order to monitor the basic mechanical properties and interior damage of concrete structures,the piezoelectric actuator/sensor based wave propagation method was investigated experimentally in the laboratory using a ...In order to monitor the basic mechanical properties and interior damage of concrete structures,the piezoelectric actuator/sensor based wave propagation method was investigated experimentally in the laboratory using a specifically designed test setup.The energy attenuation of stress waves was measured by the relative index between the output voltage of sensors and the excitation voltage at the actuator.Based on the experimental results of concrete cube and cylinder specimens,the effect of excitation frequencies,excitation amplitude,wave propagation paths and the curing age on the output signals of sensors are evaluated.The results show that the relative voltage attenuation coefficient RVAC is an effective indicator for measuring the attenuation of stress waves through the interior of concrete.展开更多
Surface acoustic wave （SAW） resonators are a type of ultraviolet （UV） light sensors with high sensitivity, and they have been extensively studied. Transparent SAW devices are very useful and can be developed into ...Surface acoustic wave （SAW） resonators are a type of ultraviolet （UV） light sensors with high sensitivity, and they have been extensively studied. Transparent SAW devices are very useful and can be developed into various sensors and microfluidics for sensing/monitoring and lab-on-chip applications. We report the fabrication of high sensitivity SAW UV sensors based on piezoelectric （PE） ZnO thin films deposited on glass substrates. The sensors were fabricated and their performances against the post-deposition annealing condition were investigated. It was found that the UV-light sensitivity is improved by more than one order of magnitude after annealing. The frequency response increases significantly and the response becomes much faster. The optimized devices also show a small temperature coefficient of frequency and excellent repeatability and stability, demonstrating its potential for UV-light sensing application.展开更多
Investigation of the propagation of the wave in SAW sensors is a basis for the research and design of the sensors. With the advance of the sensor, both the effect of environment on the surface ply and the geometry of ...Investigation of the propagation of the wave in SAW sensors is a basis for the research and design of the sensors. With the advance of the sensor, both the effect of environment on the surface ply and the geometry of waveguide are complicated. To consider the complication, a model with gradient surface ply and multilayer waveguide of SH wave propagation in sensor is proposed. The equation of wave velocity is derived by a transfer matrix method. Through the equation, the function of wave velocity increment via the change of parameters in the surface ply is obtained. The effect of the inhomogeneity on the function is also studied. Finally, some influencing factors of the behavior of the sensor are discussed.展开更多
A new type of the surface acoustic wave (SAW) sensor system was delivered. Urease from several kinds of plant seeds was extracted with different extracting solvents. The urease activity, Michaelis constant and other k...A new type of the surface acoustic wave (SAW) sensor system was delivered. Urease from several kinds of plant seeds was extracted with different extracting solvents. The urease activity, Michaelis constant and other kinetic parameters were estimated for the first time by means of the new device-SAW sensor system. Some factors such as pH, temperature, activators and inhibitors are also discussed. The method can be applied to the determination of urea content in human urine and the experimental results consist with those reported.展开更多
Wood nondestructive testing （NDT） is one of the high efficient methods in utilizing wood. This paper explained the principle of log defect testing by using stress wave, and analyzed the effects of sensor quantity on...Wood nondestructive testing （NDT） is one of the high efficient methods in utilizing wood. This paper explained the principle of log defect testing by using stress wave, and analyzed the effects of sensor quantity on defect testing results by using stress wave in terms of image fitting degree and error rate. The results showed that for logs with diameter ranging from 20 to 40 cm, at least 12 sensors were needed to meet the requirement which ensure a high testing accuracy of roughly 90% of fitness with 0.1 of error rate. And 10 sensors were recommended to judge the possible locations of defects and 6 sensors were sufficient to decide whether there were defects or not.展开更多
Summary: A new kind of biosensor for immunology was developed by ultrasonic technique and LB membrane. A double delay-line resonator was made by using ST-cut quartz crystal with working frequency of 149. 7 MHz. Then a...Summary: A new kind of biosensor for immunology was developed by ultrasonic technique and LB membrane. A double delay-line resonator was made by using ST-cut quartz crystal with working frequency of 149. 7 MHz. Then a layer of LB membrane was covered on it. When anti-IgM anti- body of various concentrations was added to it, the sensor can be used to detect IgM antigen. The biosensor was highly sensitive, small and light. The experimental results showed that the working frequency change of the sensor was proportional to the concentration of antibody with its dilution ratio between 1: 10000 and 1: 100. It was also first observed that the frequency curve of the sen- sor resulting from the reaction of IgM antigen and antibody undulated in the experiment.展开更多
文摘A fluid sensor based on the surface transverse wave (STW) delay line on ST-cut quartz has been developed and tested in a large number of fluids with different viscosity and permittivity levels.Influence of fluid mechanical and electrical properties on the sensor's response has been determined and the sensor's performance has been compared with a bulk acoustic wave (BAW) viscosity sensor.The result shows that the viscosity sensitivity of the developed STW sensor represented by the signal to noise ratio is lower than that of a 5 MHz BAW sensor.Applications of the sensor in detecting the quality of industrial fluids are discussed.
基金the financial support from the National Natural Science Foundation of China(Nos.51003118, 21273267)the Research Programs from the Ministry of Science and Technology of China(No.2012BAK06B03)+1 种基金the Shanghai Science and Technology Committee(No.11JC1414700)the Open Research Fund of State Key Laboratory of Bioelectronics, Southeast University
文摘We report the first use of organic semiconductors （OSCs）-coated PAN nanofibrous mats as highly responsive fluorescence quenching-based chemosensors for 2,4,6-trinitrotoluene （TNT） and H2O2 detection in vapor phase. Conjugated polymers, poly（triphenylaminealt-biphenylene vinylene） （TPA- PBPV）, and small organic molecules, l-horonic-ester pyrene and 1,6-bisboron-ester pyrene, were coated onto the nanofibers fabricated by electrospinning. By introducing the nanofibers structure, a 9-fold fluorescence intensity enhancement and a 14-fold sensitivity enhancement were achieved, which could be attributed to its high area-to-volume ratio, excellent gas permeability, and more importantly, the evanescent-wave effect occurred once the diameters of the fibers were small enough. Since the organic semiconductors coated onto the nanofibrous mats could be replaced by other functional materials, the nanofibers-enhanced detection strategies could be extended to more general domains including chemical and environmental detection.
基金This work was supported by the National Natural Science Foundation of China (Grant No. 10304012).
文摘The interdigital transducer (IDT) can excite Lamb wave in a piezoelectric plate loading with a liquid layer, and the phase velocity of Lamb wave is associated with the properties of the liquid layer. In this paper, the concept of effective permittivity is introduced to study the Lamb wave's potential application in liquid sensing. Considering the measuring of ideal nonviscous liquid, the sensors array is designed to sense the density and the dielectric constant of the liquid layer simultaneously. Using LiNbO3 as piezoelectric material, in order to improve the sensors array sensitivity and the electro-mechanical coupling coefficient, the optimized results including plate thicknesses and cut orientations are presented by numerical simulation. These studies show that the Lamb wave sensors array can be potential in liquid sensing.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174142,11304160 and 11404147the National Basic Research Program of China under Grant No 2012CB921504+2 种基金the PAPD Projectthe Natural Science Foundation of Jiangsu Higher Education Institutions of China under Grant No 13KJB140008the Foundation of Nanjing University of Posts and Telecommunications under Grant No NY213018
文摘ZnO films on R-sapphire substrates are prepared and characterized by x-ray diffraction and scanning electron microscopy, which indicate that the thin films are well crystallized with （1120） texture. Love wave and Rayleigh wave are used for fabrications of humidity sensors, which are excited in [1100] and [0001] directions of the （1120） ZnO piezoelectric films, respectively. The experimental results show that both kinds of sensors have good humidity response and repeatability, and the performances of the Love wave sensors are better than those of the Rayleigh wave sensors at room temperature. Moreover, the theoretical calculations of the mass sensitivity of the sensors are a/so carried out and the calculated results are in good agreement with the experimental measurements.
基金Funded by the National Natural Science Foundation of China (No.50708065)the National High-tech R&D Program(863 Program )(No.2007-AA-11-Z-113)the Key Projects in the Science and Technology Pillar Program of Tianjin(No.11ZCKFSF00300)
文摘In order to monitor the basic mechanical properties and interior damage of concrete structures,the piezoelectric actuator/sensor based wave propagation method was investigated experimentally in the laboratory using a specifically designed test setup.The energy attenuation of stress waves was measured by the relative index between the output voltage of sensors and the excitation voltage at the actuator.Based on the experimental results of concrete cube and cylinder specimens,the effect of excitation frequencies,excitation amplitude,wave propagation paths and the curing age on the output signals of sensors are evaluated.The results show that the relative voltage attenuation coefficient RVAC is an effective indicator for measuring the attenuation of stress waves through the interior of concrete.
基金supported by the National Natural Science Foundation of China(Grant Nos.61274037 and 61301046)the Research Fund for the Doctoral Program of Higher Education of China(Grant Nos.20120101110031 and 20120101110054)
文摘Surface acoustic wave （SAW） resonators are a type of ultraviolet （UV） light sensors with high sensitivity, and they have been extensively studied. Transparent SAW devices are very useful and can be developed into various sensors and microfluidics for sensing/monitoring and lab-on-chip applications. We report the fabrication of high sensitivity SAW UV sensors based on piezoelectric （PE） ZnO thin films deposited on glass substrates. The sensors were fabricated and their performances against the post-deposition annealing condition were investigated. It was found that the UV-light sensitivity is improved by more than one order of magnitude after annealing. The frequency response increases significantly and the response becomes much faster. The optimized devices also show a small temperature coefficient of frequency and excellent repeatability and stability, demonstrating its potential for UV-light sensing application.
基金This study was supported by the National Natural Science Foundation of China (No. 59635140)the Doctoral Education Foundation of the Ministry of Education of ChinaAeronautics Foundation of China.
文摘Investigation of the propagation of the wave in SAW sensors is a basis for the research and design of the sensors. With the advance of the sensor, both the effect of environment on the surface ply and the geometry of waveguide are complicated. To consider the complication, a model with gradient surface ply and multilayer waveguide of SH wave propagation in sensor is proposed. The equation of wave velocity is derived by a transfer matrix method. Through the equation, the function of wave velocity increment via the change of parameters in the surface ply is obtained. The effect of the inhomogeneity on the function is also studied. Finally, some influencing factors of the behavior of the sensor are discussed.
基金Project supported by the National Natural Science Foundation of China and the Foundation ofNational Education Commission of China.
文摘A new type of the surface acoustic wave (SAW) sensor system was delivered. Urease from several kinds of plant seeds was extracted with different extracting solvents. The urease activity, Michaelis constant and other kinetic parameters were estimated for the first time by means of the new device-SAW sensor system. Some factors such as pH, temperature, activators and inhibitors are also discussed. The method can be applied to the determination of urea content in human urine and the experimental results consist with those reported.
基金This paper was supported by the project "Devel-opment of Portable NDT Instrument (2002(39-1))" sponsored by Na-tional Forestry Administrative Bureau of China
文摘Wood nondestructive testing （NDT） is one of the high efficient methods in utilizing wood. This paper explained the principle of log defect testing by using stress wave, and analyzed the effects of sensor quantity on defect testing results by using stress wave in terms of image fitting degree and error rate. The results showed that for logs with diameter ranging from 20 to 40 cm, at least 12 sensors were needed to meet the requirement which ensure a high testing accuracy of roughly 90% of fitness with 0.1 of error rate. And 10 sensors were recommended to judge the possible locations of defects and 6 sensors were sufficient to decide whether there were defects or not.
基金This project was supported by a grant from Foundation of National Sensor Key Laboratory of China !(1994).
文摘Summary: A new kind of biosensor for immunology was developed by ultrasonic technique and LB membrane. A double delay-line resonator was made by using ST-cut quartz crystal with working frequency of 149. 7 MHz. Then a layer of LB membrane was covered on it. When anti-IgM anti- body of various concentrations was added to it, the sensor can be used to detect IgM antigen. The biosensor was highly sensitive, small and light. The experimental results showed that the working frequency change of the sensor was proportional to the concentration of antibody with its dilution ratio between 1: 10000 and 1: 100. It was also first observed that the frequency curve of the sen- sor resulting from the reaction of IgM antigen and antibody undulated in the experiment.
