We experimentally study the dynamic characteristics of a miniaturized spin-exchange relaxation-free(SERF) magnetometer based on uniform light field. The ceramic ferrule is used to expand the Gaussian beam to improve l...We experimentally study the dynamic characteristics of a miniaturized spin-exchange relaxation-free(SERF) magnetometer based on uniform light field. The ceramic ferrule is used to expand the Gaussian beam to improve light intensity uniformity, while the volume of the sensor is also reduced. This scheme makes the magnetometer have better sensitivity when the detected light intensity is less than 3.16 m W/cm^(2) at 120℃. When the temperature rises to 150℃ the sensitivity under the action of uniform light field is 18.5 f T/Hz^(1/2). The bandwidth of the sensor remains at the original level and meets application needs. The proposed structure improves transverse polarization uniformity within the miniaturized sensor, which is ideal for the magnetoencephalography and magnetocardiography imaging systems.展开更多
In this study, small- and large-particle-diameter phosphor powders were mixed together（hybrid phosphors）to balance light efficacy and angular color uniformity and pursue optimal results. Phosphor with small-particle...In this study, small- and large-particle-diameter phosphor powders were mixed together（hybrid phosphors）to balance light efficacy and angular color uniformity and pursue optimal results. Phosphor with small-particlediameter of 4 lm was employed and it was mixed into each large-particle-diameter phosphor of 10, 16, 22, and 26 lm,at mass percentage from 0 % to 50 % with an interval of10 %, respectively. Remote phosphor package was adopted and overall phosphor concentration was kept constant for better comparison. Moreover, absorption coefficient labs,scattering coefficient lscaand extinction coefficient lext of each hybrid phosphors were calculated based on Mie theory to further discuss the experiment results. Results show that, the introduction of small-particle-diameter phosphor to large one can highly improve angular color uniformity while only slightly reduce light efficacy. The optimal performance with angular color uniformity of91.6 % as well as normalized light efficacy of 95.7 % is achieved in the white light emitting diode with hybrid phosphors consisting of 60 wt% powder of 22 μm and40 wt% powder of 4 μm.展开更多
In a commercialized, fully artificial plant factory, artificial luminaire is arranged in a unified way using a general illumination theory, an actual measurement, or an empirical methodology. However, with these metho...In a commercialized, fully artificial plant factory, artificial luminaire is arranged in a unified way using a general illumination theory, an actual measurement, or an empirical methodology. However, with these methods, lightings are implemented without considering specific optical characteristics of lighting or material characteristics of each component that constructs a cultivation system, resulting in an amount of light that becomes irregular. The amount of lighting is closely related with the growth and quality of crops, and the deviation between points where cultivated crops are located causes quality difference in the produced crops, thus impairing the economic feasibility of a plant factory. In this regard, a simulation to figure out an optimum lighting layout was performed. Arrangements based on the spectrum distribution of light source and reflector materials were implemented to ascertain the distance between lighting and height of lighting and gather information in the pre-treatment process to improve the uniformity of light in the plant cultivation system. Improvement of around 15% in light uniformity is achieved compared with the existing system after the simulation is carried out. This result would reduce the deviation in crop growth to make uniform quality crop production possible.展开更多
A system with uniform light reflection in the inner surface within a horizontal 2/3 cylindrical structure for line-scan CCD of the print testing was designed. The design was based on diffuse reflection uniformity of t...A system with uniform light reflection in the inner surface within a horizontal 2/3 cylindrical structure for line-scan CCD of the print testing was designed. The design was based on diffuse reflection uniformity of the integrating sphere and requirement of the strip uniform illumination region. This system was called dome light. White light LED array light sources were used for uniform illumi- nation. The LEDs were filtrated to composite array light source based on coefficient of variation of a single LED. The standard white board and SG color checkers were used in the line-scan CCD imaging experiments under the dome light and ordinary illumination light source. The average color difference （AE） of SG color checkers in CIELAB space was 2. 091 under the dome light and 2. 286 under ordinary illumination light source respectively. Experimental results indicate that the dome light can satisfy illumination uniformity and color rendering consistency for line-scan CCD and provide a standard light source for uniform calibration of different cameras.展开更多
Polymer thin film with uniform thickness and flat surface profile is the key point for polymer light emitting diodes(PLEDs) by inkjet printing. However, the coffee ring effect is usually observed due to the mismatch b...Polymer thin film with uniform thickness and flat surface profile is the key point for polymer light emitting diodes(PLEDs) by inkjet printing. However, the coffee ring effect is usually observed due to the mismatch between the evaporation of the solvent and the decrease of solution volume, which promotes the formation of radial flow from the interior of the drop to the edge. In this paper, coffee ring effects of inkjet printed poly(spirobifluorene) films were proposed to be restrained by decreasing capillary force by adding co-solvent with high boiling point and high viscosity to the main solvent. The low evaporation rate of the co-solvent can reduce the driving force of the radial flow; meanwhile the high viscosity of the co-solvent can increase the resistance of the radial flow. Thus, polymer films with improve uniformity can be obtained due to the suppression of the radial flow. The device performance was greatly improved under the condition of proper film thickness and film uniformity and the maximum luminous efficiency of devices with inkjet printed poly(spirobifluorene) can reach 80% of the spin-coated devices.展开更多
LED can effectively promote the growth of crops and improve the yield of crops. In order to make the crops grow evenly in the agricultural greenhouse, the uniformity of illumination is very important. Because of the i...LED can effectively promote the growth of crops and improve the yield of crops. In order to make the crops grow evenly in the agricultural greenhouse, the uniformity of illumination is very important. Because of the importance of illumination uniformity to the growth of crops, this paper intends to establish the illuminance model of light source without considering the influence factors such as the difference of each light source group and air scattering. On this basis, the reasonable layout of each light source position in the light source group is considered. Therefore, a light replenishment scheduling strategy based on the displacement of light source group is proposed in this paper Improve the uniformity of illumination in agricultural greenhouse and reduce its operation cost. Experiments show that the strategy is effective.展开更多
基金the National Natural Science Foundation of China (Grant No. 62003020)。
文摘We experimentally study the dynamic characteristics of a miniaturized spin-exchange relaxation-free(SERF) magnetometer based on uniform light field. The ceramic ferrule is used to expand the Gaussian beam to improve light intensity uniformity, while the volume of the sensor is also reduced. This scheme makes the magnetometer have better sensitivity when the detected light intensity is less than 3.16 m W/cm^(2) at 120℃. When the temperature rises to 150℃ the sensitivity under the action of uniform light field is 18.5 f T/Hz^(1/2). The bandwidth of the sensor remains at the original level and meets application needs. The proposed structure improves transverse polarization uniformity within the miniaturized sensor, which is ideal for the magnetoencephalography and magnetocardiography imaging systems.
基金financially supported by the National Natural Science Foundation of China (No. 51272027)
文摘In this study, small- and large-particle-diameter phosphor powders were mixed together（hybrid phosphors）to balance light efficacy and angular color uniformity and pursue optimal results. Phosphor with small-particlediameter of 4 lm was employed and it was mixed into each large-particle-diameter phosphor of 10, 16, 22, and 26 lm,at mass percentage from 0 % to 50 % with an interval of10 %, respectively. Remote phosphor package was adopted and overall phosphor concentration was kept constant for better comparison. Moreover, absorption coefficient labs,scattering coefficient lscaand extinction coefficient lext of each hybrid phosphors were calculated based on Mie theory to further discuss the experiment results. Results show that, the introduction of small-particle-diameter phosphor to large one can highly improve angular color uniformity while only slightly reduce light efficacy. The optimal performance with angular color uniformity of91.6 % as well as normalized light efficacy of 95.7 % is achieved in the white light emitting diode with hybrid phosphors consisting of 60 wt% powder of 22 μm and40 wt% powder of 4 μm.
基金financially supported by the Ministry of Education, Science, and Technology (MEST)the National Research Foundation of Korea (NRF) through the Human Resource Training Project for Regional Innovationsupported by the Human Resources Development of the Korea Institute of Energy Technology Evaluation and Planning (No.20114010203040) grant funded by the Korean government’s Ministry of Knowledge Economy
文摘In a commercialized, fully artificial plant factory, artificial luminaire is arranged in a unified way using a general illumination theory, an actual measurement, or an empirical methodology. However, with these methods, lightings are implemented without considering specific optical characteristics of lighting or material characteristics of each component that constructs a cultivation system, resulting in an amount of light that becomes irregular. The amount of lighting is closely related with the growth and quality of crops, and the deviation between points where cultivated crops are located causes quality difference in the produced crops, thus impairing the economic feasibility of a plant factory. In this regard, a simulation to figure out an optimum lighting layout was performed. Arrangements based on the spectrum distribution of light source and reflector materials were implemented to ascertain the distance between lighting and height of lighting and gather information in the pre-treatment process to improve the uniformity of light in the plant cultivation system. Improvement of around 15% in light uniformity is achieved compared with the existing system after the simulation is carried out. This result would reduce the deviation in crop growth to make uniform quality crop production possible.
基金Supported by the National Natural Science Foundation of China(61078048)
文摘A system with uniform light reflection in the inner surface within a horizontal 2/3 cylindrical structure for line-scan CCD of the print testing was designed. The design was based on diffuse reflection uniformity of the integrating sphere and requirement of the strip uniform illumination region. This system was called dome light. White light LED array light sources were used for uniform illumi- nation. The LEDs were filtrated to composite array light source based on coefficient of variation of a single LED. The standard white board and SG color checkers were used in the line-scan CCD imaging experiments under the dome light and ordinary illumination light source. The average color difference （AE） of SG color checkers in CIELAB space was 2. 091 under the dome light and 2. 286 under ordinary illumination light source respectively. Experimental results indicate that the dome light can satisfy illumination uniformity and color rendering consistency for line-scan CCD and provide a standard light source for uniform calibration of different cameras.
基金financially supported by the National Natural Science Foundation of China (Nos. 21574130, 51473161, 51873212)the Ministry of Science and Technology of China (No. 2015CB655001)National Key R&D Program of "Strategic Advanced Electronic Materials" (Nos. 2016YFB0401301, 2016YFB04011001)
文摘Polymer thin film with uniform thickness and flat surface profile is the key point for polymer light emitting diodes(PLEDs) by inkjet printing. However, the coffee ring effect is usually observed due to the mismatch between the evaporation of the solvent and the decrease of solution volume, which promotes the formation of radial flow from the interior of the drop to the edge. In this paper, coffee ring effects of inkjet printed poly(spirobifluorene) films were proposed to be restrained by decreasing capillary force by adding co-solvent with high boiling point and high viscosity to the main solvent. The low evaporation rate of the co-solvent can reduce the driving force of the radial flow; meanwhile the high viscosity of the co-solvent can increase the resistance of the radial flow. Thus, polymer films with improve uniformity can be obtained due to the suppression of the radial flow. The device performance was greatly improved under the condition of proper film thickness and film uniformity and the maximum luminous efficiency of devices with inkjet printed poly(spirobifluorene) can reach 80% of the spin-coated devices.
文摘LED can effectively promote the growth of crops and improve the yield of crops. In order to make the crops grow evenly in the agricultural greenhouse, the uniformity of illumination is very important. Because of the importance of illumination uniformity to the growth of crops, this paper intends to establish the illuminance model of light source without considering the influence factors such as the difference of each light source group and air scattering. On this basis, the reasonable layout of each light source position in the light source group is considered. Therefore, a light replenishment scheduling strategy based on the displacement of light source group is proposed in this paper Improve the uniformity of illumination in agricultural greenhouse and reduce its operation cost. Experiments show that the strategy is effective.
