Level set methods are widely used for predicting evolutions of complex free surface topologies,such as the crystal and crack growth,bubbles and droplets deformation,spilling and breaking waves,and two-phase flow pheno...Level set methods are widely used for predicting evolutions of complex free surface topologies,such as the crystal and crack growth,bubbles and droplets deformation,spilling and breaking waves,and two-phase flow phenomena.This paper presents a characteristic level set equation which is derived from the two-dimensional level set equation by using the characteristic-based scheme.An explicit finite volume element method is developed to discretize the equation on triangular grids.Several examples are presented to demonstrate the performance of the proposed method for calculating interface evolutions in time.The proposed level set method is also coupled with the Navier-Stokes equations for two-phase immiscible incompressible flow analysis with surface tension.The Rayleigh-Taylor instability problem is used to test and evaluate the effectiveness of the proposed scheme.展开更多
The finite volume method （FVM） has many advantages in 2-D shallow water numerical simulation. In this study, the finite volume method is used with unstructured triangular grids to simulate the tidal currents. The Ro...The finite volume method （FVM） has many advantages in 2-D shallow water numerical simulation. In this study, the finite volume method is used with unstructured triangular grids to simulate the tidal currents. The Roe scheme is applied in the calculation of the intercell numerical flux, and the MUSCL method is introduced to improve its accuracy. The time integral is a two-step scheme of forecast and revision. For the verification of the present method, the Stoker＇s problem is calculated and the result is compared with the mathematically analytic solutions. The comparison indicates that the method is feasible. A sea area of a port is used as an example to test the method established here. The result shows that the present computational method is satisfactory, and it could be applied to the engineering fields.展开更多
A numerical study of vortex-induced rotations(VIRs) of an equivalent triangular cylinder, which is free to rotate in the azimuthal direction in a uniform flow, is presented. Based on an immersed boundary method, the n...A numerical study of vortex-induced rotations(VIRs) of an equivalent triangular cylinder, which is free to rotate in the azimuthal direction in a uniform flow, is presented. Based on an immersed boundary method, the numerical model is established, and is verified through the benchmark problem of flow past a freely rotating rectangular body.The computation is performed for a fixed reduced mass of m~*=2.0 and the structural stiffness and damping ratio are set to zero. The effects of Reynolds number(Re=25-180) on the characteristics of VIR are studied. It is found that the dynamic response of the triangular cylinder exhibits four distinct modes with increasing Re: a rest position,periodic rotational oscillation, random rotation and autorotation. For the rotational oscillation mode, the cylinder undergoes a periodic vibration around an equilibrium position with one side facing the incoming flow. Since the rotation effect, the outset of vortex shedding from cylinder shifts to a much lower Reynolds number. Further increase in Re leads to 2 P and P+S vortex shedding modes besides the typical 2 S pattern. Our simulation results also elucidate that the free rotation significantly changes the drag and lift forces. Inspired by these facts, the effect of free rotation on flow-induced vibration of a triangular cylinder in the in-line and transverse directions is investigated. The results show that when the translational vibration is coupled with rotation, the triangular cylinder presents a galloping response instead of vortex-induced vibration(VIV).展开更多
This paper studies the eigenfunction expansion method to solve the two dimensional （2D） elasticity problems based on the stress formulation. The fundamental system of partial differential equations of the 2D problem...This paper studies the eigenfunction expansion method to solve the two dimensional （2D） elasticity problems based on the stress formulation. The fundamental system of partial differential equations of the 2D problems is rewritten as an upper tri angular differential system based on the known results, and then the associated upper triangular operator matrix matrix is obtained. By further research, the two simpler com plete orthogonal systems of eigenfunctions in some space are obtained, which belong to the two block operators arising in the operator matrix. Then, a more simple and conve nient general solution to the 2D problem is given by the eigenfunction expansion method. Furthermore, the boundary conditions for the 2D problem, which can be solved by this method, are indicated. Finally, the validity of the obtained results is verified by a specific example.展开更多
The quadrilateral discrete Kirchhoff thin plate bending element DKQ is based on the isoparametric element Q8, however, the accuracy of the isoparametric quadrilateral elements will drop significantly due to mesh disto...The quadrilateral discrete Kirchhoff thin plate bending element DKQ is based on the isoparametric element Q8, however, the accuracy of the isoparametric quadrilateral elements will drop significantly due to mesh distortions. In a previous work, we constructed an 8-node quadrilateral spline element L8 using the triangular area coordinates and the B- net method, which can be insensitive to mesh distortions and possess the second order completeness in the Cartesian co- ordinates. In this paper, a thin plate spline element is devel- oped based on the spline element L8 and the refined tech- nique. Numerical examples show that the present element indeed possesses higher accuracy than the DKQ element for distorted meshes.展开更多
We use a new updated algorithm scheme to investigate the critical behaviour of the two-dimensional ferromagnetic Ising model on a triangular lattice with the nearest neighbour interactions. The transition is examined ...We use a new updated algorithm scheme to investigate the critical behaviour of the two-dimensional ferromagnetic Ising model on a triangular lattice with the nearest neighbour interactions. The transition is examined by generating accurate data for lattices with L=8, 10, 12, 15, 20, 25, 30, 40 and 50. The updated spin algorithm we employ has the advantages of both a Metropolis algorithm and a single-update method. Our study indicates that the transition is continuous at Тc=3.6403（2）. A convincing finite-size scaling analysis of the model yields ν=0.9995（21）, β/ν=0.12400（17）, γ/v=1.75223（22）, γ^1/ν=1.7555（22）, α/ν=0.00077（420） （scaling） and α/ν=0.0010（42） （hyperscaling）. The present scheme yields more accurate estimates for all the critical exponents than the Monte Carlo method, and our estimates are shown to be in excellent agreement with their predicted values.展开更多
Absolute phononic band gaps can be substantially improved in two-dimensional lattices by using a symmetry reduction approach. In this paper, the propagation of elastic waves in a two-dirnensional hybrid triangular lat...Absolute phononic band gaps can be substantially improved in two-dimensional lattices by using a symmetry reduction approach. In this paper, the propagation of elastic waves in a two-dirnensional hybrid triangular lattice structure consisting of stainless steel cylinders in air is investigated theoretically. The band structure is calculated with the plane wave expansion （PWE） method. The hybrid triangular Bravais lattice is formed by two kinds of triangular lattices. Different from ordinary triangular lattices, the band gap opens at low frequency （between the first and the second bands） regime because of lifting the bands degeneracy at high symmetry points of the Brillouin zone. The location and width of the band gaps can be tuned by the position of the additional rods.展开更多
The interaction between an elastic triangular inclusion and a crack is investigated. The problem is formulated using the boundary integral equations for traction boundary value problems derived by Chau and Wang as bas...The interaction between an elastic triangular inclusion and a crack is investigated. The problem is formulated using the boundary integral equations for traction boundary value problems derived by Chau and Wang as basic equations. By using the continuity condition of traction and displacement on interface as supplement equations, a set of equations for solving the interaction problem between an inclusion and a crack are obtained, which are solved by using a new boundary element method. The results in terms of stress intensity factors (SIFs) are calculated for a variety of crack_inclusion arrangements and the elastic constants of the matrix and the inclusion. The results are valuable for studying new composite materials.展开更多
A numerical research on magnetohydrodynamic mixed convection flow in a lid-driven trapezoidal enclosure at non-uniform heating of bottom wall has been studied numerically. The enclosure consists of insulated top wall ...A numerical research on magnetohydrodynamic mixed convection flow in a lid-driven trapezoidal enclosure at non-uniform heating of bottom wall has been studied numerically. The enclosure consists of insulated top wall and cold side walls, too. It also contains a heated triangular block (<em>Rot</em> = 0<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">°</span> - 90<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">°</span>) located somewhere inside the enclosure. The boundary top wall of the enclosure is moving through uniform speed <em>U</em><sub>0</sub>. The geometry of the model has been represented mathematically by coupled governing equations in accordance with proper boundary conditions and then a two-dimensional Galerkin finite element based numerical approach has been adopted to solve this paper. The numerical computations have been carried out for the wide range of parameters Prandtl number (0.5 ≤ <em>Pr</em> ≤ 2), Reynolds number (60 ≤ <em>Re</em> ≤ 120), Rayleigh number (<em>Ra</em> = 10<sup>3</sup>) and Hartmann number (<em>Ha</em> = 20) taking with different rotations of heated triangular block. The results have been shown in the form of streamlines, temperature patterns or isotherms, average Nusselt number and average bulk temperature of the fluid in the enclosure at non-uniform heating of bottom wall. It is also indicated that both the streamlines, isotherm patterns strongly depend on the aforesaid governing parameters and location of the triangular block but the thermal conductivity of the triangular block has a noteworthy role on the isotherm pattern lines. Moreover, the variation of <em>Nu</em><sub>av</sub> of hot bottom wall and <em>θ</em><sub>av</sub> in the enclosure is demonstrated here to show the characteristics of heat transfer in the enclosure.展开更多
With the application of Hammer integral formulas of a continuous function on a triangular element, the numerical integral formulas of some discrete functions on the element are derived by means of decomposition and re...With the application of Hammer integral formulas of a continuous function on a triangular element, the numerical integral formulas of some discrete functions on the element are derived by means of decomposition and recombination of base functions. Hammer integral formulas are the special examples of those of the paper.展开更多
This paper proposes an eigenfunction expansion method to solve twodimensional （2D） elasticity problems based on stress formulation. By introducing appropriate state functions, the fundamental system of partial diffe...This paper proposes an eigenfunction expansion method to solve twodimensional （2D） elasticity problems based on stress formulation. By introducing appropriate state functions, the fundamental system of partial differential equations of the above 2D problems is rewritten as an upper triangular differential system. For the associated operator matrix, the existence and the completeness of two normed orthogonal eigenfunction systems in some space are obtained, which belong to the two block operators arising in the operator matrix. Moreover, the general solution to the above 2D problem is given by the eigenfunction expansion method.展开更多
The phenomena of magneto-hydrodynamic natural convection in a two-dimensional semicircular top enclosure with triangular obstacle in the rectangular cavity were studied numerically. The governing differential equation...The phenomena of magneto-hydrodynamic natural convection in a two-dimensional semicircular top enclosure with triangular obstacle in the rectangular cavity were studied numerically. The governing differential equations are solved by using the most important method which is finite element method (weighted-residual method). The top wall is placed at cold T<sub>c</sub> and bottom wall is heated T<sub>h</sub>. Here the sidewalls of the cavity assumed adiabatic. Also all the wall are occupied to be no-slip condition. A heated triangular obstacle is located at the center of the cavity. The study accomplished for Prandtl number Pr = 0.71;the Rayleigh number Ra = 10<sup>3</sup>, 10<sup>5</sup>, 5 × 10<sup>5</sup>, 10<sup>6</sup> and for Hartmann number Ha = 0, 20, 50, 100. The results represent the streamlines, isotherms, velocity and temperature fields as well as local Nusselt number.展开更多
Constructing Bernstein-Bezier triangular interpolating curve surface interpolating a series of arbitrary disordered data points is of considerable importance for the design and modeling of surfaces with a variety of c...Constructing Bernstein-Bezier triangular interpolating curve surface interpolating a series of arbitrary disordered data points is of considerable importance for the design and modeling of surfaces with a variety of continuity information. In this article. a kind of simple and reliable algorithm that can process complex field triangular grid generating is presented, and a group of formulae for determining triangular curved surface with wholly C1 continuity are given. It can process arbitrary non-convex boundary and can be used to construct surfaces inner holes.展开更多
基金King Mongkut’s University of Technology North Bangkok (KMUTNB)the Office of the Higher Education Commission (OHEC)the National Metal and Materials Technology Center (MTEC) for supporting this research work
文摘Level set methods are widely used for predicting evolutions of complex free surface topologies,such as the crystal and crack growth,bubbles and droplets deformation,spilling and breaking waves,and two-phase flow phenomena.This paper presents a characteristic level set equation which is derived from the two-dimensional level set equation by using the characteristic-based scheme.An explicit finite volume element method is developed to discretize the equation on triangular grids.Several examples are presented to demonstrate the performance of the proposed method for calculating interface evolutions in time.The proposed level set method is also coupled with the Navier-Stokes equations for two-phase immiscible incompressible flow analysis with surface tension.The Rayleigh-Taylor instability problem is used to test and evaluate the effectiveness of the proposed scheme.
基金This paper was supported bythe Natural Science Foundation of Shandong Province (Grant No.y2004f13)
文摘The finite volume method （FVM） has many advantages in 2-D shallow water numerical simulation. In this study, the finite volume method is used with unstructured triangular grids to simulate the tidal currents. The Roe scheme is applied in the calculation of the intercell numerical flux, and the MUSCL method is introduced to improve its accuracy. The time integral is a two-step scheme of forecast and revision. For the verification of the present method, the Stoker＇s problem is calculated and the result is compared with the mathematically analytic solutions. The comparison indicates that the method is feasible. A sea area of a port is used as an example to test the method established here. The result shows that the present computational method is satisfactory, and it could be applied to the engineering fields.
基金financially supported by the Fundamental Research Funds for the Central Universities(Grant Nos.2018B56414 and2019B12014)the National Natural Science Foundation of China(Grant No.51609077)
文摘A numerical study of vortex-induced rotations(VIRs) of an equivalent triangular cylinder, which is free to rotate in the azimuthal direction in a uniform flow, is presented. Based on an immersed boundary method, the numerical model is established, and is verified through the benchmark problem of flow past a freely rotating rectangular body.The computation is performed for a fixed reduced mass of m~*=2.0 and the structural stiffness and damping ratio are set to zero. The effects of Reynolds number(Re=25-180) on the characteristics of VIR are studied. It is found that the dynamic response of the triangular cylinder exhibits four distinct modes with increasing Re: a rest position,periodic rotational oscillation, random rotation and autorotation. For the rotational oscillation mode, the cylinder undergoes a periodic vibration around an equilibrium position with one side facing the incoming flow. Since the rotation effect, the outset of vortex shedding from cylinder shifts to a much lower Reynolds number. Further increase in Re leads to 2 P and P+S vortex shedding modes besides the typical 2 S pattern. Our simulation results also elucidate that the free rotation significantly changes the drag and lift forces. Inspired by these facts, the effect of free rotation on flow-induced vibration of a triangular cylinder in the in-line and transverse directions is investigated. The results show that when the translational vibration is coupled with rotation, the triangular cylinder presents a galloping response instead of vortex-induced vibration(VIV).
基金supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 20070126002)the National Natural Science Foundation of China (No. 10962004)
文摘This paper studies the eigenfunction expansion method to solve the two dimensional （2D） elasticity problems based on the stress formulation. The fundamental system of partial differential equations of the 2D problems is rewritten as an upper tri angular differential system based on the known results, and then the associated upper triangular operator matrix matrix is obtained. By further research, the two simpler com plete orthogonal systems of eigenfunctions in some space are obtained, which belong to the two block operators arising in the operator matrix. Then, a more simple and conve nient general solution to the 2D problem is given by the eigenfunction expansion method. Furthermore, the boundary conditions for the 2D problem, which can be solved by this method, are indicated. Finally, the validity of the obtained results is verified by a specific example.
基金supported by the National Natural Science Foundation of China(11001037,11102037,11290143)the Fundamental Research Funds for the Central Universities(DUT13LK07)
文摘The quadrilateral discrete Kirchhoff thin plate bending element DKQ is based on the isoparametric element Q8, however, the accuracy of the isoparametric quadrilateral elements will drop significantly due to mesh distortions. In a previous work, we constructed an 8-node quadrilateral spline element L8 using the triangular area coordinates and the B- net method, which can be insensitive to mesh distortions and possess the second order completeness in the Cartesian co- ordinates. In this paper, a thin plate spline element is devel- oped based on the spline element L8 and the refined tech- nique. Numerical examples show that the present element indeed possesses higher accuracy than the DKQ element for distorted meshes.
基金Project supported partially by Guangdong Natural Science Foundation (GDNSF) of China (Grant No 07300793)One of authors(Loan Mushtaq) was partially supported by the Guangdong Ministry of Education,China
文摘We use a new updated algorithm scheme to investigate the critical behaviour of the two-dimensional ferromagnetic Ising model on a triangular lattice with the nearest neighbour interactions. The transition is examined by generating accurate data for lattices with L=8, 10, 12, 15, 20, 25, 30, 40 and 50. The updated spin algorithm we employ has the advantages of both a Metropolis algorithm and a single-update method. Our study indicates that the transition is continuous at Тc=3.6403（2）. A convincing finite-size scaling analysis of the model yields ν=0.9995（21）, β/ν=0.12400（17）, γ/v=1.75223（22）, γ^1/ν=1.7555（22）, α/ν=0.00077（420） （scaling） and α/ν=0.0010（42） （hyperscaling）. The present scheme yields more accurate estimates for all the critical exponents than the Monte Carlo method, and our estimates are shown to be in excellent agreement with their predicted values.
基金supported by the National Natural Science Foundation of China(No.10632020).
文摘Absolute phononic band gaps can be substantially improved in two-dimensional lattices by using a symmetry reduction approach. In this paper, the propagation of elastic waves in a two-dirnensional hybrid triangular lattice structure consisting of stainless steel cylinders in air is investigated theoretically. The band structure is calculated with the plane wave expansion （PWE） method. The hybrid triangular Bravais lattice is formed by two kinds of triangular lattices. Different from ordinary triangular lattices, the band gap opens at low frequency （between the first and the second bands） regime because of lifting the bands degeneracy at high symmetry points of the Brillouin zone. The location and width of the band gaps can be tuned by the position of the additional rods.
文摘The interaction between an elastic triangular inclusion and a crack is investigated. The problem is formulated using the boundary integral equations for traction boundary value problems derived by Chau and Wang as basic equations. By using the continuity condition of traction and displacement on interface as supplement equations, a set of equations for solving the interaction problem between an inclusion and a crack are obtained, which are solved by using a new boundary element method. The results in terms of stress intensity factors (SIFs) are calculated for a variety of crack_inclusion arrangements and the elastic constants of the matrix and the inclusion. The results are valuable for studying new composite materials.
文摘A numerical research on magnetohydrodynamic mixed convection flow in a lid-driven trapezoidal enclosure at non-uniform heating of bottom wall has been studied numerically. The enclosure consists of insulated top wall and cold side walls, too. It also contains a heated triangular block (<em>Rot</em> = 0<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">°</span> - 90<span style="font-family:Verdana, Helvetica, Arial;white-space:normal;background-color:#FFFFFF;">°</span>) located somewhere inside the enclosure. The boundary top wall of the enclosure is moving through uniform speed <em>U</em><sub>0</sub>. The geometry of the model has been represented mathematically by coupled governing equations in accordance with proper boundary conditions and then a two-dimensional Galerkin finite element based numerical approach has been adopted to solve this paper. The numerical computations have been carried out for the wide range of parameters Prandtl number (0.5 ≤ <em>Pr</em> ≤ 2), Reynolds number (60 ≤ <em>Re</em> ≤ 120), Rayleigh number (<em>Ra</em> = 10<sup>3</sup>) and Hartmann number (<em>Ha</em> = 20) taking with different rotations of heated triangular block. The results have been shown in the form of streamlines, temperature patterns or isotherms, average Nusselt number and average bulk temperature of the fluid in the enclosure at non-uniform heating of bottom wall. It is also indicated that both the streamlines, isotherm patterns strongly depend on the aforesaid governing parameters and location of the triangular block but the thermal conductivity of the triangular block has a noteworthy role on the isotherm pattern lines. Moreover, the variation of <em>Nu</em><sub>av</sub> of hot bottom wall and <em>θ</em><sub>av</sub> in the enclosure is demonstrated here to show the characteristics of heat transfer in the enclosure.
文摘With the application of Hammer integral formulas of a continuous function on a triangular element, the numerical integral formulas of some discrete functions on the element are derived by means of decomposition and recombination of base functions. Hammer integral formulas are the special examples of those of the paper.
基金Project supported by the National Natural Science Foundation of China (No. 10962004)the Special-ized Research Fund for the Doctoral Program of Higher Education of China (No. 20070126002)+1 种基金the Chunhui Program of Ministry of Education of China (No. Z2009-1-01010)the Natural Science Foundation of Inner Mongolia (No. 2009BS0101)
文摘This paper proposes an eigenfunction expansion method to solve twodimensional （2D） elasticity problems based on stress formulation. By introducing appropriate state functions, the fundamental system of partial differential equations of the above 2D problems is rewritten as an upper triangular differential system. For the associated operator matrix, the existence and the completeness of two normed orthogonal eigenfunction systems in some space are obtained, which belong to the two block operators arising in the operator matrix. Moreover, the general solution to the above 2D problem is given by the eigenfunction expansion method.
文摘The phenomena of magneto-hydrodynamic natural convection in a two-dimensional semicircular top enclosure with triangular obstacle in the rectangular cavity were studied numerically. The governing differential equations are solved by using the most important method which is finite element method (weighted-residual method). The top wall is placed at cold T<sub>c</sub> and bottom wall is heated T<sub>h</sub>. Here the sidewalls of the cavity assumed adiabatic. Also all the wall are occupied to be no-slip condition. A heated triangular obstacle is located at the center of the cavity. The study accomplished for Prandtl number Pr = 0.71;the Rayleigh number Ra = 10<sup>3</sup>, 10<sup>5</sup>, 5 × 10<sup>5</sup>, 10<sup>6</sup> and for Hartmann number Ha = 0, 20, 50, 100. The results represent the streamlines, isotherms, velocity and temperature fields as well as local Nusselt number.
文摘Constructing Bernstein-Bezier triangular interpolating curve surface interpolating a series of arbitrary disordered data points is of considerable importance for the design and modeling of surfaces with a variety of continuity information. In this article. a kind of simple and reliable algorithm that can process complex field triangular grid generating is presented, and a group of formulae for determining triangular curved surface with wholly C1 continuity are given. It can process arbitrary non-convex boundary and can be used to construct surfaces inner holes.
