The aim of this work is to establish volcanic seismic reflection configuration models in the rift basins of Northeast China from a new perspective,the volcanostratigraphic structure.Accordingly,the volcanostratigraphi...The aim of this work is to establish volcanic seismic reflection configuration models in the rift basins of Northeast China from a new perspective,the volcanostratigraphic structure.Accordingly,the volcanostratigraphic structure of an outcrop near the Hailaier Rift Basin was analyzed to understand the characteristics and causal factors of physical boundaries.Further,3D seismic reflection data and analysis of deep boreholes in the Songliao Rift Basin were used to establish the relationship between volcanic seismic reflection configurations and volcanostratigraphic structures.These studies suggested that in volcanic successions,physical boundaries coincide with volcanic boundaries,and their distributions are controlled by the stacking patterns of volcanic units.Therefore,volcanic seismic reflection configurations can be interpreted in terms of the stacking patterns of volcanic units.These are also referred to as general bedding patterns in volcanostratigraphy.Furthermore,four typical seismic reflection configurations were identified,namely,the chaotic,the parallel continuous,the hummocky,the multi-mound superimposed and the composite.The corresponding interpretation models comprised single massive unit,vertical,intersectional,lateral multi-mound,and composite stacking patterns.The hummocky and composite reflection configurations with intersectional and composite stacking patterns are the most favorable for the exploration of volcanic reservoirs in rift basins.展开更多
To improve the adaptability of TBMs in diverse geological environments,this paper proposes a reconfigurable Type-V thrust mechanism(V-TM)with rearrangeable working states,in which structural stiffness can be automatic...To improve the adaptability of TBMs in diverse geological environments,this paper proposes a reconfigurable Type-V thrust mechanism(V-TM)with rearrangeable working states,in which structural stiffness can be automatically altered during operation.Therefore,millions of configurations can be obtained,and thousands of instances of working status per configuration can be set respectively.Nonetheless,the complexity of configurations and diversity of working states contributes to further complications for the structural stiffness algorithm.This results in challenges such as difficulty calculating the payload compliance index and the environment adaptability index.To solve this problem,we use the configuration matrix to describe the relationship between propelling jacks under reconfiguration and adopt pattern vectors to describe the working state of each hydraulic cylinder.Then,both the dynamic compatible equation between propeller forces of the hydraulic cylinders and driving forces,and the kinematic harmonizing equation between the hydraulic cylinder displacements and their deformations are established.Next,we derive the stiffness analytical equation using Hooke’s law and the Jacobian Matrix.The proposed approach provides an effective algorithm to support structural rigidity analysis,and lays a solid theoretical foundation for calculating the performance indexes of the V-TM.We then analyze the rigidity characteristics of typical configurations under different working states,and obtain the main factors affecting structural stiffness of the V-TM.The results show the deviation degree of structural parameters in hydraulic cylinders within the same group,and the working status of propelling jacks.Finally,our constructive conclusions contribute valuable information for matching and optimization by drawing on the factors that affect the structural rigidity of the V-TM.展开更多
为保障复杂装备技术状态管理的有效集成和多方协同,实现技术状态管理业务数据的双重有序管控,提出基于领域系统(domain system,DS)的建模架构和设计方法。通过引入基于模式的系统工程(pattern-based system engineering,PBSE)框架,构建...为保障复杂装备技术状态管理的有效集成和多方协同,实现技术状态管理业务数据的双重有序管控,提出基于领域系统(domain system,DS)的建模架构和设计方法。通过引入基于模式的系统工程(pattern-based system engineering,PBSE)框架,构建基于DS的复杂装备技术状态管理基本架构,设计DS元模型、DS模型、DS模式的建模方法,将国防部体系架构元模型(Department of Defense Architecture framework metamodel,DM2)进行复杂装备技术状态管理领域化重组为DS元模型,并通过领域元数据映射为DS模型,使其有序组织为适用于具体装备技术状态管理的DS模式。为验证所提方法的有效性,以运载火箭结构系统多视图物料清单(X bill of material,XBOM)为案例,开展基于DS的技术状态管理应用。结果表明,所提方法可为其技术状态管理提供兼具建模的一致性和可追溯性的实施方案,为复杂装备技术状态管理的领域模型配置提供指导性思路。展开更多
基金Projects(41472304,41430322) supported by the National Natural Science Foundation of ChinaProject(2012CB822002) supported by National Major State Basic Research Program of China
文摘The aim of this work is to establish volcanic seismic reflection configuration models in the rift basins of Northeast China from a new perspective,the volcanostratigraphic structure.Accordingly,the volcanostratigraphic structure of an outcrop near the Hailaier Rift Basin was analyzed to understand the characteristics and causal factors of physical boundaries.Further,3D seismic reflection data and analysis of deep boreholes in the Songliao Rift Basin were used to establish the relationship between volcanic seismic reflection configurations and volcanostratigraphic structures.These studies suggested that in volcanic successions,physical boundaries coincide with volcanic boundaries,and their distributions are controlled by the stacking patterns of volcanic units.Therefore,volcanic seismic reflection configurations can be interpreted in terms of the stacking patterns of volcanic units.These are also referred to as general bedding patterns in volcanostratigraphy.Furthermore,four typical seismic reflection configurations were identified,namely,the chaotic,the parallel continuous,the hummocky,the multi-mound superimposed and the composite.The corresponding interpretation models comprised single massive unit,vertical,intersectional,lateral multi-mound,and composite stacking patterns.The hummocky and composite reflection configurations with intersectional and composite stacking patterns are the most favorable for the exploration of volcanic reservoirs in rift basins.
基金Supported by National Natural Science Foundation of China(Grant No.51675180)National Key Basic Research Program of China(973 Program,Grant No.2013CB037503)
文摘To improve the adaptability of TBMs in diverse geological environments,this paper proposes a reconfigurable Type-V thrust mechanism(V-TM)with rearrangeable working states,in which structural stiffness can be automatically altered during operation.Therefore,millions of configurations can be obtained,and thousands of instances of working status per configuration can be set respectively.Nonetheless,the complexity of configurations and diversity of working states contributes to further complications for the structural stiffness algorithm.This results in challenges such as difficulty calculating the payload compliance index and the environment adaptability index.To solve this problem,we use the configuration matrix to describe the relationship between propelling jacks under reconfiguration and adopt pattern vectors to describe the working state of each hydraulic cylinder.Then,both the dynamic compatible equation between propeller forces of the hydraulic cylinders and driving forces,and the kinematic harmonizing equation between the hydraulic cylinder displacements and their deformations are established.Next,we derive the stiffness analytical equation using Hooke’s law and the Jacobian Matrix.The proposed approach provides an effective algorithm to support structural rigidity analysis,and lays a solid theoretical foundation for calculating the performance indexes of the V-TM.We then analyze the rigidity characteristics of typical configurations under different working states,and obtain the main factors affecting structural stiffness of the V-TM.The results show the deviation degree of structural parameters in hydraulic cylinders within the same group,and the working status of propelling jacks.Finally,our constructive conclusions contribute valuable information for matching and optimization by drawing on the factors that affect the structural rigidity of the V-TM.
文摘为保障复杂装备技术状态管理的有效集成和多方协同,实现技术状态管理业务数据的双重有序管控,提出基于领域系统(domain system,DS)的建模架构和设计方法。通过引入基于模式的系统工程(pattern-based system engineering,PBSE)框架,构建基于DS的复杂装备技术状态管理基本架构,设计DS元模型、DS模型、DS模式的建模方法,将国防部体系架构元模型(Department of Defense Architecture framework metamodel,DM2)进行复杂装备技术状态管理领域化重组为DS元模型,并通过领域元数据映射为DS模型,使其有序组织为适用于具体装备技术状态管理的DS模式。为验证所提方法的有效性,以运载火箭结构系统多视图物料清单(X bill of material,XBOM)为案例,开展基于DS的技术状态管理应用。结果表明,所提方法可为其技术状态管理提供兼具建模的一致性和可追溯性的实施方案,为复杂装备技术状态管理的领域模型配置提供指导性思路。
