Dynamic wheel-rail contact forces induced by a severe form of wheel tread damage have been measured by a wheel impact load detector during full-scale field tests at different vehicle speeds.Based on laser scanning,the...Dynamic wheel-rail contact forces induced by a severe form of wheel tread damage have been measured by a wheel impact load detector during full-scale field tests at different vehicle speeds.Based on laser scanning,the measured three-dimensional damage geometry is employed in simulations of dynamic vehicle-track interaction to calibrate and verify a simulation model.The relation between the magnitude of the impact load and various operational parameters,such as vehicle speed,lateral position of wheel-rail contact,track stiffness and position of impact within a sleeper bay,is investigated.The calibrated model is later employed in simulations featuring other forms of tread damage;their effects on impact load and subsequent fatigue impact on bearings,wheel webs and subsurface initiated rolling contact fatigue of the wheel tread are assessed.The results quantify the effects of wheel tread defects and are valuable in a shift towards condition-based maintenance of running gear,and for general assessment of the severity of different types of railway wheel tread damage.展开更多
The wet grip of tire has always been the focus because it is related to the personal safety of passengers directly.Many methods were employed to improve the wet grip of tire.Researchers paid more attention on bionics ...The wet grip of tire has always been the focus because it is related to the personal safety of passengers directly.Many methods were employed to improve the wet grip of tire.Researchers paid more attention on bionics method recent years.In nature,tree frogs have high adhesion ability in wet environment,which is mainly due to their footpads having fine polygon grooves(mainly hexagon grooves).To improve the performance of wet grip of tire,from the perspective of bionics,inspired by the footpad of tree frog,the bionic hexagon tread pattern was designed.The friction test was carried out to compare with the common tread patterns such as serrated,striped and square patterns.The results showed that the bionic hexagon tread pattern generally had high friction coefficient and directional stability of friction.The main reason was that the hexagon tread block was less affected by the friction-induced torque and the groove of bionic hexagon tread pattern had better drainage characteristic.The bionic hexagon tread pattern provides new idea and method for the design of tires with high wet grip.展开更多
A cell is a house to myriad biochemical reactions composed in a symphony of various pathways,both survival and apoptotic.Apoptosis is of fundamental significance to an organ by replacing weary and senile cells with ju...A cell is a house to myriad biochemical reactions composed in a symphony of various pathways,both survival and apoptotic.Apoptosis is of fundamental significance to an organ by replacing weary and senile cells with juvenile cells.展开更多
Treading barley (“Mugifumi” in Japanese) is a barley culturing process that is unique and indispensable in Japan. Generally, roller machines or human feet are used to tread young barley several times (Figure 1). As ...Treading barley (“Mugifumi” in Japanese) is a barley culturing process that is unique and indispensable in Japan. Generally, roller machines or human feet are used to tread young barley several times (Figure 1). As a model examination, a stainless steel instrument was used for treading barley in this study (Figure 2(a)). Treading damages plants and decreases growth, such as the height and weight of aerial parts, which then recover gradually. In our study, the total amino acid contents increased with the treading stress. The treading stress induced a 1.7-fold increase in aspartic acid contents and an approximately 1.6-fold increase in glutamic acid, proline, cystine, and methionine contents. Isolation and purification suggested that the main components of the methanol-eluted fraction from the young green barley were six known phenolic compounds. Saponarin and lutonarin were the main components. The saponarin content was about 160 mg/g (methanol-soluble fraction) at 10 days after germination. We found that the higher antioxidant activity was due to the increased lutonarin/saponarin ratio from 10% to 24%. Therefore, our results suggest that treading stress is useful for young green barley.展开更多
A finite element modeling technique is employed in this paper to predict the groove wander of longitudinal tread grooved tires. In generally, groove wander is the lateral force acting on a vehicle’s wheel resulting f...A finite element modeling technique is employed in this paper to predict the groove wander of longitudinal tread grooved tires. In generally, groove wander is the lateral force acting on a vehicle’s wheel resulting from the combination of rain grooves. If the lateral force of tire is generated by groove wander, unexpected lateral motion of vehicle will happen and it makes drivers uncomfortable. This paper describes the effect of groove wander according to the shape condition of tire tread groove and highway groove using the finite element analysis based on a static loading or a steady-state rolling assumption. The road groove can be located anywhere relative to the longitudinal tread groove. Therefore, the lateral force of the tire is changing depending on the location of the groove road. The numerical results for groove wander prediction of the longitudinal tread grooved tires are compared with the subjective evaluation. It is found that the waveform for the tire with varying grooved road position has a peak-to-peak lateral force in order to estimate the rating of groove wander. The effect of the road groove width and the pitch length on the peak-to-peak lateral force of tire is discussed. It is found that the prediction of FEA-based groove wander model using finite element analysis will be useful for the reliability design of the tire tread pattern design.展开更多
THE Chinese Government announced in early 2012 that the coun- try would continue implementing the proactive fiscal policy and prudent monetary policy to support a steady and relatively fast economic growth. On August ...THE Chinese Government announced in early 2012 that the coun- try would continue implementing the proactive fiscal policy and prudent monetary policy to support a steady and relatively fast economic growth. On August 2, the People＇s Bank of China, Chinas central bank, released the Report on the Implementation of Monetary Policies in Q2 2012, showing the policies＇ effectiveness.展开更多
This study investigates the effect of various tread designs to enhance grip on both dry and wet friction,aiming to reduce slip and fall accidents,especially in slipprone workplaces and among the elderly.The research i...This study investigates the effect of various tread designs to enhance grip on both dry and wet friction,aiming to reduce slip and fall accidents,especially in slipprone workplaces and among the elderly.The research involves analyzing frictional performance and deformation characteristics through dry and wet friction testing.Computeraided design(CAD)software was used to create digital models of various tread patterns,and two different additive manufacturing(AM)techniques,fused filament fabrication(FFF)and stereolithography(SLA)printing,were used for three-dimensional(3D)print block samples with tread patterns,and the materials used were thermoplastic rubber(TPR)filament and photocurable elastomeric resin.A specialized friction testing machine was used to measure the friction force of the treads on a glass surface under dry and wet conditions.A high-speed camera recorded the treads’deformation and water drainage during testing.The results revealed the influence of tread pattern designs with two different rubber-like materials on friction and deformation,as well as performance on various contact surfaces.展开更多
The shoe sole geometrical design parameters are believed to be important factors affecting the coefficient of friction （COF） between the shoe/floor interface. This study is concerned with the relationship between th...The shoe sole geometrical design parameters are believed to be important factors affecting the coefficient of friction （COF） between the shoe/floor interface. This study is concerned with the relationship between the measured COF and the tread groove orientation and width on the footwear pad. Friction measurements using the Brungraber Mark Ⅱ slipmeter were conducted. Six tread groove width/orientations designs on the footwear pads under 27 footwear material/floor/contamination conditions were tested. The results show that tread orientation and width affect the measured COF significantly. Wider grooved footwear pads result in higher COF values and footwear pads with tread grooves perpendicular to the friction measurement direction have higher COF values. A regression model using measured COF as the dependent variable and tread groove width, groove orientation, footwear material, floor, and contamination conditions as independent variables was established. The models are significant at p〈0.0001 with R^2 of 0.97, which may be used in predicting the COF at the shoe-floor interface .展开更多
基金funded from the European Union's Horizon 2020 research and innovation programme in the project In2Track3 under grant agreement No.101012456.
文摘Dynamic wheel-rail contact forces induced by a severe form of wheel tread damage have been measured by a wheel impact load detector during full-scale field tests at different vehicle speeds.Based on laser scanning,the measured three-dimensional damage geometry is employed in simulations of dynamic vehicle-track interaction to calibrate and verify a simulation model.The relation between the magnitude of the impact load and various operational parameters,such as vehicle speed,lateral position of wheel-rail contact,track stiffness and position of impact within a sleeper bay,is investigated.The calibrated model is later employed in simulations featuring other forms of tread damage;their effects on impact load and subsequent fatigue impact on bearings,wheel webs and subsurface initiated rolling contact fatigue of the wheel tread are assessed.The results quantify the effects of wheel tread defects and are valuable in a shift towards condition-based maintenance of running gear,and for general assessment of the severity of different types of railway wheel tread damage.
基金supported by the National Key R&D Plan(2016YFD0701102)the Graduate Innovation Fund of Jilin University(101832020CX166)+3 种基金the Science-Technology Development Plan Project of Jilin Province(20200403038SF,20200501013GX,20200403006SF)the"13th Five-Year Plan"Scientific Research Foundation of the Education Department of Jilin Province(JJKH20201000KJ,JJKH20211120KJ)the Talent Development Foundation of Jilin Province(2020015)the Fundamental Research Foundation for the Central Universities.
文摘The wet grip of tire has always been the focus because it is related to the personal safety of passengers directly.Many methods were employed to improve the wet grip of tire.Researchers paid more attention on bionics method recent years.In nature,tree frogs have high adhesion ability in wet environment,which is mainly due to their footpads having fine polygon grooves(mainly hexagon grooves).To improve the performance of wet grip of tire,from the perspective of bionics,inspired by the footpad of tree frog,the bionic hexagon tread pattern was designed.The friction test was carried out to compare with the common tread patterns such as serrated,striped and square patterns.The results showed that the bionic hexagon tread pattern generally had high friction coefficient and directional stability of friction.The main reason was that the hexagon tread block was less affected by the friction-induced torque and the groove of bionic hexagon tread pattern had better drainage characteristic.The bionic hexagon tread pattern provides new idea and method for the design of tires with high wet grip.
文摘A cell is a house to myriad biochemical reactions composed in a symphony of various pathways,both survival and apoptotic.Apoptosis is of fundamental significance to an organ by replacing weary and senile cells with juvenile cells.
文摘Treading barley (“Mugifumi” in Japanese) is a barley culturing process that is unique and indispensable in Japan. Generally, roller machines or human feet are used to tread young barley several times (Figure 1). As a model examination, a stainless steel instrument was used for treading barley in this study (Figure 2(a)). Treading damages plants and decreases growth, such as the height and weight of aerial parts, which then recover gradually. In our study, the total amino acid contents increased with the treading stress. The treading stress induced a 1.7-fold increase in aspartic acid contents and an approximately 1.6-fold increase in glutamic acid, proline, cystine, and methionine contents. Isolation and purification suggested that the main components of the methanol-eluted fraction from the young green barley were six known phenolic compounds. Saponarin and lutonarin were the main components. The saponarin content was about 160 mg/g (methanol-soluble fraction) at 10 days after germination. We found that the higher antioxidant activity was due to the increased lutonarin/saponarin ratio from 10% to 24%. Therefore, our results suggest that treading stress is useful for young green barley.
文摘A finite element modeling technique is employed in this paper to predict the groove wander of longitudinal tread grooved tires. In generally, groove wander is the lateral force acting on a vehicle’s wheel resulting from the combination of rain grooves. If the lateral force of tire is generated by groove wander, unexpected lateral motion of vehicle will happen and it makes drivers uncomfortable. This paper describes the effect of groove wander according to the shape condition of tire tread groove and highway groove using the finite element analysis based on a static loading or a steady-state rolling assumption. The road groove can be located anywhere relative to the longitudinal tread groove. Therefore, the lateral force of the tire is changing depending on the location of the groove road. The numerical results for groove wander prediction of the longitudinal tread grooved tires are compared with the subjective evaluation. It is found that the waveform for the tire with varying grooved road position has a peak-to-peak lateral force in order to estimate the rating of groove wander. The effect of the road groove width and the pitch length on the peak-to-peak lateral force of tire is discussed. It is found that the prediction of FEA-based groove wander model using finite element analysis will be useful for the reliability design of the tire tread pattern design.
文摘THE Chinese Government announced in early 2012 that the coun- try would continue implementing the proactive fiscal policy and prudent monetary policy to support a steady and relatively fast economic growth. On August 2, the People＇s Bank of China, Chinas central bank, released the Report on the Implementation of Monetary Policies in Q2 2012, showing the policies＇ effectiveness.
文摘This study investigates the effect of various tread designs to enhance grip on both dry and wet friction,aiming to reduce slip and fall accidents,especially in slipprone workplaces and among the elderly.The research involves analyzing frictional performance and deformation characteristics through dry and wet friction testing.Computeraided design(CAD)software was used to create digital models of various tread patterns,and two different additive manufacturing(AM)techniques,fused filament fabrication(FFF)and stereolithography(SLA)printing,were used for three-dimensional(3D)print block samples with tread patterns,and the materials used were thermoplastic rubber(TPR)filament and photocurable elastomeric resin.A specialized friction testing machine was used to measure the friction force of the treads on a glass surface under dry and wet conditions.A high-speed camera recorded the treads’deformation and water drainage during testing.The results revealed the influence of tread pattern designs with two different rubber-like materials on friction and deformation,as well as performance on various contact surfaces.
基金Supported by the National Science Council of Taiwan, China (NSC 92-2213-E-216-006)
文摘The shoe sole geometrical design parameters are believed to be important factors affecting the coefficient of friction （COF） between the shoe/floor interface. This study is concerned with the relationship between the measured COF and the tread groove orientation and width on the footwear pad. Friction measurements using the Brungraber Mark Ⅱ slipmeter were conducted. Six tread groove width/orientations designs on the footwear pads under 27 footwear material/floor/contamination conditions were tested. The results show that tread orientation and width affect the measured COF significantly. Wider grooved footwear pads result in higher COF values and footwear pads with tread grooves perpendicular to the friction measurement direction have higher COF values. A regression model using measured COF as the dependent variable and tread groove width, groove orientation, footwear material, floor, and contamination conditions as independent variables was established. The models are significant at p〈0.0001 with R^2 of 0.97, which may be used in predicting the COF at the shoe-floor interface .
