An active trailer braking controller to improve the lateral stability of car-trailer systems is presented. The special and complex structures of these types of vehicles exhibit unique unstable motion behavior, such as...An active trailer braking controller to improve the lateral stability of car-trailer systems is presented. The special and complex structures of these types of vehicles exhibit unique unstable motion behavior, such as the trailer swing, jack-knifing and rollover. These unstable motion modes may lead to fatal accidents. The effects of passive mechanical parameters on the stability of car-trailer systems have been thoroughly investigated. Some of the passive parameters, such as the center of gravity of the trailer, may be drastically varied during various operating conditions. Even for an optimal design of a car-trailer system, based on a specific passive parameter set, the lateral stability cannot be guaranteed. In order to improve the lateral stability of car-trailer systems, an active trailer braking controller is designed using the Linear Quadratic Regular （LQR） technique. To derive the controller, a vehicle model with 3 Degrees Of Freedom （DOF） is developed to represent the car-trailer system. A single lane-change maneuver has been simulated to examine the performance of the controller and the numerical results are compared with those of the baseline design. The benchmark investigation indicates that the optimal controller based on the LQR technique can effectively improve the high-speed lateral stability of the car-trailer system.展开更多
On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in nor...On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.展开更多
Rollover and jack-knifing of tractor semi-trailer are serious threats for vehicle safety, and accordingly active safety technologies have been widely used to reduce or prevent the occurrence of such accidents. However...Rollover and jack-knifing of tractor semi-trailer are serious threats for vehicle safety, and accordingly active safety technologies have been widely used to reduce or prevent the occurrence of such accidents. However, currently tractor semi-trailer stability control is generally only a single hazardous condition (rollover or jack-knifing) control, it is difficult to ensure the vehicle comprehensive stability of various dangerous conditions. The main objective of this study is to introduce a multi-objective stability control algorithm which can improve the vehicle stability of a tractor semi-trailer by using differential braking. A vehicle controller is designed to minimize the likelihood of rollover and jack-knifing. First a linear vehicle model of tractor semi-trailer is constructed. Then an optimal yaw control for tractor using differential braking is applied to minimize the yaw rate and lateral acceleration deviation of tractor, as well as the hitch articulation angle of tractor semi-trailer, so as to improve the vehicle stability. Second a braking scheme and variable structure control with sliding mode control are introduced in order to achieve the best braking effect. Last Fishhook maneuver is introduced to the active safety simulation and the active control system effect verification. The simulation results show that multi-objective stability control algorithm of semi-trailer could improve the vehicle stability significantly during the transient maneuvers. The proposed multi-objective stability control algorithm is effective to prevent the vehicle rollover and jackknifing.展开更多
A movie trailer is a common advertising tool in the entertainment industry. Detection of a viewer’s brain responses to a movie trailer can help film producers to tailor a more appealing trailer of a movie. In this st...A movie trailer is a common advertising tool in the entertainment industry. Detection of a viewer’s brain responses to a movie trailer can help film producers to tailor a more appealing trailer of a movie. In this study, we acquired electroencephalographic (EEG) signals from subjects when they watched movie trailers (labeled as Movie session), and compared with their resting state session (labeled as Resting session) or when they watch nature scenes (labeled as Nature session). We used Sample Entropy (SampEn) to analyze the EEG signals between different sessions. Results showed that the complexity ratios at Fp1, Fp2 and Fz channels derived from Movie session were significantly lower than that in Resting state or when subjects watched Nature session (p < 0.001). Our results suggest that the brain status can affect the complexity of their EEG. Further, the attraction of attention of a movie trailer can be observed from the change of EEG.展开更多
To analyze wheel wear discrepancy between motor car and trailer of an intercity train,a novel wheel wear rates calculation model was proposed,which was composed of the intercity train dynamics model,wheel-rail three-d...To analyze wheel wear discrepancy between motor car and trailer of an intercity train,a novel wheel wear rates calculation model was proposed,which was composed of the intercity train dynamics model,wheel-rail three-dimensional rolling contact FEM model and the wear model.The simulated results were contrasted with measured results in field test.The simulated results showed the motor car wheels had larger rotation rate and longitudinal creepage than the trailer wheels.Meanwhile,the motor car wheels encountered larger vertical forces and longitudinal forces from bogie because of the heavier car body and the impact of traction torque.The traction torque acting on motor car wheel could increase the slip rates in the rear part of wheel contact patch and weaken the spinning phenomenon of relative slip.Larger contact pressure and slip rates caused the higher wear rates of motor car wheel than those of trailer wheel.The overall trends of wheel wear depth in simulated and tested results were similar.And they both showed the motor car wheel encountered the more serious wear than the trailer wheel.These models can be used to study the effect of the traction characteristics curves on the wear of wheel.展开更多
In order to evaluate a full trailer’s vibration performance,lumped mass model of seven degrees of freedom is set up to predict the ride comfort of whole vehicle.The acceleration history and the transfer function of e...In order to evaluate a full trailer’s vibration performance,lumped mass model of seven degrees of freedom is set up to predict the ride comfort of whole vehicle.The acceleration history and the transfer function of each measuring point can be got from simulation.The analysis results show that the maximum acceleration RMS value of the vehicle mass center is about 0.3g,which satisfies the requirements of attenuating vibration of precision equipment being transported on particular roads and speeds.So the research provides valuable reference for the optimum selection of the suspension system’s parameters.展开更多
In order to evaluate two different schemes＇ structural dynamic characters, dynamic response analysis of a commercial truck＇s main chassis frames is carried out. On the basis of correlation study between the tested a...In order to evaluate two different schemes＇ structural dynamic characters, dynamic response analysis of a commercial truck＇s main chassis frames is carried out. On the basis of correlation study between the tested and calculated modal results, the assembled frames＇ finite element analysis （FEA） models with sufficient precision are built up. Random response analysis in frequency domain is carried out with these FEA models, RMS values of yon Mises and main principle stresses of these two frames are obtained. It shows that the analysis resuits of the distributing tendency and concrete value ranges are coincident very well with test results. And from the results, it could be concluded that frames of scheme A endures relative better loading conditions and should be adopted as the final scheme.展开更多
This research paper aims to identify the effect of tire size on the handling characteristics of a trailer attached to a vehicle. In various stability tests, different models with different tires from the market were t...This research paper aims to identify the effect of tire size on the handling characteristics of a trailer attached to a vehicle. In various stability tests, different models with different tires from the market were tested. A successful outcome of this research would generate an efficient tire selection process and improve the handling of a trailer attached to a vehicle while maximizing fuel efficiency. In this study, different accurate tire models using the magic formula were developed in vehicle dynamics modelling and simulation software. These models were then simulated on on-road conditions to predict vehicle and trailer behaviour under different conditions within the software. Two distinct tests were conducted, the J-Turn test and the Double Lane change test. The results of these tests were used to evaluate the handling characteristics and decide on a better tire size for the trailer attached to the vehicle.展开更多
Road transport safety has always been paid attention to by the safety production managers of enterprises. In this study, cloud model and analytic hierarchy process were applied to the safety of long-tube trailer trans...Road transport safety has always been paid attention to by the safety production managers of enterprises. In this study, cloud model and analytic hierarchy process were applied to the safety of long-tube trailer transport. The opinions of 30 experts were analyzed, from which 29 key parameters were selected. The study addressed the relevance of the parameters and the possibility of automatic collection and transmission to obtain 12 core risk factors. The macro-safety risk indicator system for long-tube trailers was established based on the identified risk indicators. Finally, a risk assessment model for road transport of long tube trailers consisting of 3 dimensions of likelihood, severity and sensitivity was constructed. This model provides a technical method for strengthening the risk control of road transport of long-tube trailers.展开更多
To provide a much more resilient transport scheme for tractor and trailer transportation systems,this paper explores the generation method of tractor and trailer transport schemes considering the influence of disrupte...To provide a much more resilient transport scheme for tractor and trailer transportation systems,this paper explores the generation method of tractor and trailer transport schemes considering the influence of disrupted events.Three states of tractors including towing loaded trailers,towing empty trailers,and idle driving are taken into account.Based on the disruption management theory,a scheduling model is constructed to minimize the total deviation cost including transportation time,transportation path,and number of used vehicles under the three states of tractors.A heuristics based on the contract net and simulated annealing algorithm is designed to solve the proposed model.Through comparative analysis of examples with different numbers of newly added transportation tasks and different types of road networks,the performance of the contract net algorithm in terms of deviations in idle driving paths,empty trailer paths,loaded trailer paths,time,number of used vehicles,and total deviation cost are analyzed.The results demonstrate the effectiveness of the model and algorithm,highlighting the superiority of the disruption management model and the contract net annealing algorithm.The study provides a reference for handling unexpected events in the tractor and trailer transportation industry.展开更多
The 3’ leader and the 5’ trailer of the rice yellow stunt rhabdovirus (RYSV) genomic RNA have been cloned and sequenced. Sequence data indicate that the RYSV leader region is composed of 203 nucleotides (nt) and the...The 3’ leader and the 5’ trailer of the rice yellow stunt rhabdovirus (RYSV) genomic RNA have been cloned and sequenced. Sequence data indicate that the RYSV leader region is composed of 203 nucleotides (nt) and the trailer region 191 nt. The terminal 9 nt of the two regions are complementary and capable of forming a putative panhandle structure common to rhabdovirus genomes. In comparison with the leader or trailer sequences of other rhab-doviruses reported so far, both the leader and trailer of RYSV are the longest and there is no obvious sequence homolo-gy between the counterparts except for a few terminal nt and the UGUU motif in the leader sequences. Polyadenylated plus-strand leader RNA has been detected in RYSV-infected rice plants by 3’ RACE. This is the second example in rhabdoviruses following the report for sonchus yellow net virus (SYNV) for existence of a polyadenylated leader RNA. No polyadenylated plus-strand transcripts of the RYSV trailer have been found using the similar method.展开更多
文摘An active trailer braking controller to improve the lateral stability of car-trailer systems is presented. The special and complex structures of these types of vehicles exhibit unique unstable motion behavior, such as the trailer swing, jack-knifing and rollover. These unstable motion modes may lead to fatal accidents. The effects of passive mechanical parameters on the stability of car-trailer systems have been thoroughly investigated. Some of the passive parameters, such as the center of gravity of the trailer, may be drastically varied during various operating conditions. Even for an optimal design of a car-trailer system, based on a specific passive parameter set, the lateral stability cannot be guaranteed. In order to improve the lateral stability of car-trailer systems, an active trailer braking controller is designed using the Linear Quadratic Regular （LQR） technique. To derive the controller, a vehicle model with 3 Degrees Of Freedom （DOF） is developed to represent the car-trailer system. A single lane-change maneuver has been simulated to examine the performance of the controller and the numerical results are compared with those of the baseline design. The benchmark investigation indicates that the optimal controller based on the LQR technique can effectively improve the high-speed lateral stability of the car-trailer system.
基金supported by the National Key Research and Development Program of China(No.2016YFC0208005)the Open Research Program of State Key Laboratory of Engine Combustion(No.K2018-11).
文摘On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.
基金supported by Open Research Fund of State Key Laboratory of Automobile Dynamics Simulation, China (Grant No. 20101103)National Natural Science Foundation of China (Grant No. 51075176)
文摘Rollover and jack-knifing of tractor semi-trailer are serious threats for vehicle safety, and accordingly active safety technologies have been widely used to reduce or prevent the occurrence of such accidents. However, currently tractor semi-trailer stability control is generally only a single hazardous condition (rollover or jack-knifing) control, it is difficult to ensure the vehicle comprehensive stability of various dangerous conditions. The main objective of this study is to introduce a multi-objective stability control algorithm which can improve the vehicle stability of a tractor semi-trailer by using differential braking. A vehicle controller is designed to minimize the likelihood of rollover and jack-knifing. First a linear vehicle model of tractor semi-trailer is constructed. Then an optimal yaw control for tractor using differential braking is applied to minimize the yaw rate and lateral acceleration deviation of tractor, as well as the hitch articulation angle of tractor semi-trailer, so as to improve the vehicle stability. Second a braking scheme and variable structure control with sliding mode control are introduced in order to achieve the best braking effect. Last Fishhook maneuver is introduced to the active safety simulation and the active control system effect verification. The simulation results show that multi-objective stability control algorithm of semi-trailer could improve the vehicle stability significantly during the transient maneuvers. The proposed multi-objective stability control algorithm is effective to prevent the vehicle rollover and jackknifing.
文摘A movie trailer is a common advertising tool in the entertainment industry. Detection of a viewer’s brain responses to a movie trailer can help film producers to tailor a more appealing trailer of a movie. In this study, we acquired electroencephalographic (EEG) signals from subjects when they watched movie trailers (labeled as Movie session), and compared with their resting state session (labeled as Resting session) or when they watch nature scenes (labeled as Nature session). We used Sample Entropy (SampEn) to analyze the EEG signals between different sessions. Results showed that the complexity ratios at Fp1, Fp2 and Fz channels derived from Movie session were significantly lower than that in Resting state or when subjects watched Nature session (p < 0.001). Our results suggest that the brain status can affect the complexity of their EEG. Further, the attraction of attention of a movie trailer can be observed from the change of EEG.
基金Project(51805374)supported by the National Natural Science Foundation of ChinaProject(208YFB1201603-08)supported by the Key R&D Program of Ministry of Science and Technology,China。
文摘To analyze wheel wear discrepancy between motor car and trailer of an intercity train,a novel wheel wear rates calculation model was proposed,which was composed of the intercity train dynamics model,wheel-rail three-dimensional rolling contact FEM model and the wear model.The simulated results were contrasted with measured results in field test.The simulated results showed the motor car wheels had larger rotation rate and longitudinal creepage than the trailer wheels.Meanwhile,the motor car wheels encountered larger vertical forces and longitudinal forces from bogie because of the heavier car body and the impact of traction torque.The traction torque acting on motor car wheel could increase the slip rates in the rear part of wheel contact patch and weaken the spinning phenomenon of relative slip.Larger contact pressure and slip rates caused the higher wear rates of motor car wheel than those of trailer wheel.The overall trends of wheel wear depth in simulated and tested results were similar.And they both showed the motor car wheel encountered the more serious wear than the trailer wheel.These models can be used to study the effect of the traction characteristics curves on the wear of wheel.
基金Supported by Program of Natural and Science Funds of Shandong Province(ZR2009FL014)the Program of Natural and Science Funds of Shandong Jiaotong University(Z201228)
文摘In order to evaluate a full trailer’s vibration performance,lumped mass model of seven degrees of freedom is set up to predict the ride comfort of whole vehicle.The acceleration history and the transfer function of each measuring point can be got from simulation.The analysis results show that the maximum acceleration RMS value of the vehicle mass center is about 0.3g,which satisfies the requirements of attenuating vibration of precision equipment being transported on particular roads and speeds.So the research provides valuable reference for the optimum selection of the suspension system’s parameters.
文摘In order to evaluate two different schemes＇ structural dynamic characters, dynamic response analysis of a commercial truck＇s main chassis frames is carried out. On the basis of correlation study between the tested and calculated modal results, the assembled frames＇ finite element analysis （FEA） models with sufficient precision are built up. Random response analysis in frequency domain is carried out with these FEA models, RMS values of yon Mises and main principle stresses of these two frames are obtained. It shows that the analysis resuits of the distributing tendency and concrete value ranges are coincident very well with test results. And from the results, it could be concluded that frames of scheme A endures relative better loading conditions and should be adopted as the final scheme.
文摘This research paper aims to identify the effect of tire size on the handling characteristics of a trailer attached to a vehicle. In various stability tests, different models with different tires from the market were tested. A successful outcome of this research would generate an efficient tire selection process and improve the handling of a trailer attached to a vehicle while maximizing fuel efficiency. In this study, different accurate tire models using the magic formula were developed in vehicle dynamics modelling and simulation software. These models were then simulated on on-road conditions to predict vehicle and trailer behaviour under different conditions within the software. Two distinct tests were conducted, the J-Turn test and the Double Lane change test. The results of these tests were used to evaluate the handling characteristics and decide on a better tire size for the trailer attached to the vehicle.
文摘Road transport safety has always been paid attention to by the safety production managers of enterprises. In this study, cloud model and analytic hierarchy process were applied to the safety of long-tube trailer transport. The opinions of 30 experts were analyzed, from which 29 key parameters were selected. The study addressed the relevance of the parameters and the possibility of automatic collection and transmission to obtain 12 core risk factors. The macro-safety risk indicator system for long-tube trailers was established based on the identified risk indicators. Finally, a risk assessment model for road transport of long tube trailers consisting of 3 dimensions of likelihood, severity and sensitivity was constructed. This model provides a technical method for strengthening the risk control of road transport of long-tube trailers.
基金support provided by the National Natural Science Foundation of China(Grant No.52362055)the Science and Technology Plan Project of Guangxi Zhuang Autonomous Region(Grant No.2021AC19334)Guangxi Science and Technology Major Program(Grant No.AA23062053).
文摘To provide a much more resilient transport scheme for tractor and trailer transportation systems,this paper explores the generation method of tractor and trailer transport schemes considering the influence of disrupted events.Three states of tractors including towing loaded trailers,towing empty trailers,and idle driving are taken into account.Based on the disruption management theory,a scheduling model is constructed to minimize the total deviation cost including transportation time,transportation path,and number of used vehicles under the three states of tractors.A heuristics based on the contract net and simulated annealing algorithm is designed to solve the proposed model.Through comparative analysis of examples with different numbers of newly added transportation tasks and different types of road networks,the performance of the contract net algorithm in terms of deviations in idle driving paths,empty trailer paths,loaded trailer paths,time,number of used vehicles,and total deviation cost are analyzed.The results demonstrate the effectiveness of the model and algorithm,highlighting the superiority of the disruption management model and the contract net annealing algorithm.The study provides a reference for handling unexpected events in the tractor and trailer transportation industry.
基金Project supported by Rice Biotechnology Program of the Rockefeller Foundation.
文摘The 3’ leader and the 5’ trailer of the rice yellow stunt rhabdovirus (RYSV) genomic RNA have been cloned and sequenced. Sequence data indicate that the RYSV leader region is composed of 203 nucleotides (nt) and the trailer region 191 nt. The terminal 9 nt of the two regions are complementary and capable of forming a putative panhandle structure common to rhabdovirus genomes. In comparison with the leader or trailer sequences of other rhab-doviruses reported so far, both the leader and trailer of RYSV are the longest and there is no obvious sequence homolo-gy between the counterparts except for a few terminal nt and the UGUU motif in the leader sequences. Polyadenylated plus-strand leader RNA has been detected in RYSV-infected rice plants by 3’ RACE. This is the second example in rhabdoviruses following the report for sonchus yellow net virus (SYNV) for existence of a polyadenylated leader RNA. No polyadenylated plus-strand transcripts of the RYSV trailer have been found using the similar method.
