This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This researc...This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This research examines the flow of a three-layered viscous fluid,considering the combined influence of heat and solutal buoyancy driven Rayleigh-Bénard convection,as well as thermal and solutal Marangoni convection.The homotopy perturbation method is used to examine and simulate complex fluid flow and transport phenomena,providing important understanding of the fundamental physics and assisting in the optimization of various battery configurations.The inquiry examines the primary elements that influence Marangoni convection and its impact on battery performance,providing insights on possible enhancements in energy storage devices.The findings indicate that the velocity profiles shown graphically exhibit a prominent core zone characterized by the maximum speed,which progressively decreases as it approaches the walls of the channel.This study enhances our comprehension of fluid dynamics and the transmission of heat and mass in intricate systems,which has substantial ramifications for the advancement of sustainable energy solutions.展开更多
Information plays a crucial role in guiding behavioral decisions during public health emergencies. Individuals communicate to acquire relevant knowledge about an epidemic, which influences their decisions to adopt pro...Information plays a crucial role in guiding behavioral decisions during public health emergencies. Individuals communicate to acquire relevant knowledge about an epidemic, which influences their decisions to adopt protective measures.However, whether to disseminate specific information is also a behavioral decision. In light of this understanding, we develop a coupled information–vaccination–epidemic model to depict these co-evolutionary dynamics in a three-layer network. Negative information dissemination and vaccination are treated as separate decision-making processes. We then examine the combined effects of herd and risk motives on information dissemination and vaccination decisions through the lens of game theory. The microscopic Markov chain approach(MMCA) is used to describe the dynamic process and to derive the epidemic threshold. Simulation results indicate that increasing the cost of negative information dissemination and providing timely clarification can effectively control the epidemic. Furthermore, a phenomenon of diminishing marginal utility is observed as the cost of dissemination increases, suggesting that authorities do not need to overinvest in suppressing negative information. Conversely, reducing the cost of vaccination and increasing vaccine efficacy emerge as more effective strategies for outbreak control. In addition, we find that the scale of the epidemic is greater when the herd motive dominates behavioral decision-making. In conclusion, this study provides a new perspective for understanding the complexity of epidemic spreading by starting with the construction of different behavioral decisions.展开更多
Accurate acquisition of the rock stress is crucial for various rock engineering applications.The hollow inclusion (HI) technique is widely used for measuring in-situ rock stress.This technique calculates the stress te...Accurate acquisition of the rock stress is crucial for various rock engineering applications.The hollow inclusion (HI) technique is widely used for measuring in-situ rock stress.This technique calculates the stress tensor by measuring strain using an HI strain cell.However,existing analytical solutions for stress calculation based on an HI strain cell in a double-layer medium are not applicable when an HI strain cell is used in a three-layer medium,leading to erroneous stress calculations.To address this issue,this paper presents a method for calculating stress tensors in a three-layer medium using numerical simulations,specifically by obtaining a constitutive matrix that relates strain measurements to stress tensors in a three-layer medium.Furthermore,using Latin hypercube sampling (LHS) and orthogonal experimental design strategies,764 groups of numerical models encompassing various stress measurement scenarios have been established and calculated using FLAC^(3D)software.Finally,a surrogate model based on artificial neural network (ANN) was developed to predict constitutive matrices,achieving a goodness of fit (R^(2)) of 0.999 and a mean squared error (MSE) of 1.254.A software program has been developed from this surrogate model for ease of use in practical engineering applications.The method’s accuracy was verified through numerical simulations,analytical solution and laboratory experiment,demonstrating its effectiveness in calculating stress in a three-layer medium.The surrogate model was applied to calculate mining-induced stress in the roadway roof rock of a coal mine,a typical case for stress measurement in a three-layer medium.Errors in stress calculations arising from the use of existing analytical solutions were corrected.The study also highlights the significant errors associated with using double-layer analytical solutions in a three-layer medium,which could lead to inappropriate engineering design.展开更多
Buried interface passivation is crucial for high-efficiency,stable perovskite solar cells(PSCs).Herein,we design a three-layer passivation structure toward the buried interface of inverted PSCs,consisting of NiO_(x),p...Buried interface passivation is crucial for high-efficiency,stable perovskite solar cells(PSCs).Herein,we design a three-layer passivation structure toward the buried interface of inverted PSCs,consisting of NiO_(x),poly(V-p-TPD)and PFN-Br(V-p-TPD,N,N'-di-p-tolyl-N,-N'-bis(4-vinylphenyl)-[1,1'-biphenyl]-4,4'-diamine;PFN-Br,poly[(9,9-bis(3'-((N,N-dimethyl)-N-ethylammonium)-propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)]dibromide).Typically,in situ poly(V-p-TPD)layer on the NiO_(x) surface was obtained by a simple thermal crosslinking process.This poly(V-p-TPD)/NiO_(x) bilayer structure is beneficial for hole extraction and high-quality perovskite films with larger grain sizes and less lattice distortion.On this basis,the PFN-Br is further introduced as a surface modification layer,which can not only optimize the energy level alignment with the perovskite but also passivate defects and suppress carrier recombination at the perovskite bottom interface.Finally,inverted PSCs based on(FA_(0.95)Cs_(0.05))PbI_(3) present 25.5%efficiency with a low V_(OC)deficit.Besides,the devices could maintain 91.15%of the initial efficiency after being stored at 85℃for 1080 h,indicating excellent thermal stability.This work highlights the potential of a three-layered passivation structure based on crosslinking polymer HTLs for highly efficient and stable PSCs.展开更多
In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with l...In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.展开更多
Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were i...Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were introduced as green solvents for separation of 2-MF/MeOH through liquid–liquid equilibrium(LLE)experiment.Three ILs,namely 1-ethyl-3-methylimidazole dihydrogen phosphate([EMIM][H_(2)PO_(4)]),1-propyl-3-methylimidazole dihydrogen phosphate([PMIM][H_(2)PO_(4)])and 1-butyl-3-methylimidazole dihydrogen phosphate([BMIM][H_(2)PO_(4)]),were screened out from 425 candidates using the conductor-like screening model for real solvents(COSMO-RS).Then,the ternary LLE data of 2-MF(1)+MeOH(2)+ILs(3)were determined at 30℃ and 101.32 kPa.Results confirmed[EMIM][H_(2)PO_(4)]as the best performer,achieving a selectivity of 343.86 and a distribution coefficient of 36.66 for MeOH—significantly higher than[PMIM][H_(2)PO_(4)]and[BMIM][H_(2)PO_(4)].The accuracy of the LLE data was verified by Othmer–Tobias and Hand equations(R^(2)>0.90).The non-random two liquid model was used to correlate the experimental data(RMSD<2%).Besides,the combination of electrostatic surfaces potential,independent gradient model based on Hirshfeld partition,mean square displacement and radial distribution functions revealed strong electrostatic interactions between[H_(2)PO_(4)]^(–) and MeOH.Interaction energy analysis further emphasizes the mechanism of MeOH separation from a mixture of 2-MF and MeOH by ILs.This work provides a multiscale strategy for the separation of 2-MF and MeOH azeotropes,highlighting the potential of ILs to improve biofuel purification while reducing energy and environmental costs.展开更多
This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization usin...This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization using high-speed camera imaging.The T-junction microchannel has a cross-sectional width of 0.6 mm and a total length of 27.3 mm.The solution of cyclohexane with 2%and 3%mass concentrations of sorbitan trioleate surfactant were used as the continuous phase,and water was used as the dispersed phase.Slug flow,characteristic of squeezing regime,were predominantly observed.The effects of liquid–liquid two-phase flow rate ratio,and dimensionless number on droplet size,and pressure drop were investigated.The squeezing regime was mapped for 0.0005≤Ca_(c)≤0.0052(capillary number)and 0.1≤q≤10(flow rate ratio).The pressure drops of slugs were in the range from 40 Pa to 200 Pa.The slug lengths were measured between 1 mm and 9 mm.A universal flow map dependent on Ca_(c)Re_(d)^(0.5) are projected to investigate the droplet formation behavior in T-junction microchannel.Correlation expressions are proposed to predict pressure drops and the slug lengths for liquid–liquid two-phase flow in a square T-junction microchannel,using dimensionless numbers such as flow rate ratio and capillary number.The result shows that large continuous phase flow rates facilitate smaller slugs,whereas higher dispersed phase flow rates result in longer shorts.展开更多
As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized fo...As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.展开更多
Liquid metals have garnered widespread attention in the fields of electronics and materials science due to their unique combination of fluidity and electrical conductivity.Conventional liquid metal droplet generators ...Liquid metals have garnered widespread attention in the fields of electronics and materials science due to their unique combination of fluidity and electrical conductivity.Conventional liquid metal droplet generators typically rely on piezoelectric actuators to impose mechanical perturbations on the jet to control droplet formation.In this work,we present a new method for generating a uniform and controllable stream of liquid metal microdroplets by applying periodic electrostatic perturbations to the jet.Using a nozzle with an inner diameter of 25??m,we achieved continuous generation of droplets approximately 51μm in diameter at a frequency of 110 kHz.By adjusting the nozzle diameter,flow rate,and the frequency of the applied voltage,the size and spacing of the droplets can be effectively tuned.Moreover,a comparison between experimental observations and theoretical predictions under various conditions demonstrates that the Rayleigh-Plateau instability theory accurately describes the disturbance growth and droplet formation under electric field excitation.Our study provides both theoretical and experimental foundations for the controlled generation of gallium-based liquid metal droplets.展开更多
Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the deve...Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the development of melt crystallization is hampered by lacking solid–liquid equilibrium (SLE) data for some isomers.Therefore,the SLE data of both binary and ternary mixtures of 2,3-dimethylphenol (2,3-DMP),3,5-dimethylphenol (3,5-DMP),and 3,4-dimethylphenol (3,4-DMP) were determined by using differential scanning calorimetry in this work.Additionally,crystallographic analysis was conducted to investigate the thermodynamic characteristics of these mixtures.The experimental results indicated that all the systems investigated in this research exhibited eutectic behavior.The experimentally obtained SLE data were well correlated with the Wilson and non-random two-liquid models.The excess thermodynamic functions were calculated to analyze the types and intensities of the molecular interactions occurring in the mixtures.Furthermore,this study developed a model for the correlation between the theoretical crystallization yield and the actual cooling yield and final yield in melt crystallization.This study has furnished reliable data essential for developing and optimizing the melt crystallization process of mixtures of 2,3-DMP,3,5-DMP,and 3,4-DMP.展开更多
Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection ...Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection challenging,they are linked to problems.Diagnostic methods like imaging and tissue biopsy are only effective when the tumor has reached a size that can be identified.The liquid biopsy technique,the least intrusive and most convenient diagnostic method,is the subject of this review.It focuses on the significance of single cell analysis in examining uncommon cancer types.The many biomarkers found in bodily fluids and the cancer types they are linked to in children have been assessed,as has the potential route towards early detection and cancer recurrence forecasting.Combining the single cell liquid biopsy with the newest technologies,such as computational and multi-omics approaches,which have improved the efficiency of processing massive and unique genetic data,appears promising.This article discusses on a number of case reports for uncommon pediatric malignancies,such as Neuroblastoma,Medulloblastoma,Wilms Tumor,Rhabdomyosarcoma,Ewing Sarcoma,and Retinoblastoma,as well as their liquid biopsy profiles.Furthermore,the findings raise ethical questions regarding the therapeutic application of the technology as well as possible difficulties related to clinical translation.The likelihood that this single cell liquid biopsy will be clinically validated and eventually used as a routine diagnostic tool for uncommon pediatric cancers will rise with the realistic approach to sensitivity monitoring,specificity upgrading,and optimization.展开更多
While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfa...While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.展开更多
Structural engineering of Pt-based nanoalloys is crucial for the rational design and manufacturing of high-performance and low-cost electrocatalysts for hydrogen evolution reaction(HER).Here,we reported PtNi nanoparti...Structural engineering of Pt-based nanoalloys is crucial for the rational design and manufacturing of high-performance and low-cost electrocatalysts for hydrogen evolution reaction(HER).Here,we reported PtNi nanoparticles with a refined size of 2.71 nm and regular strains loaded on carbon black,synthesized using the high-temperature liquid shock(HTLS)method.This approach offers significant advantages over conventional synthesis methods,including high scalability,rapid reaction rates,and precise control over the size and shape of nanocrystals.Importantly,the synthesized PtNi electrocatalysts demonstrate outstanding catalytic activity and long-term stability for HER,achieving low overpotentials of 19 and 203 mV at current densities of 10 and 1000 mA/cm^(2),respectively.The superior performance can be attributed to the combination of a refined particle size,lattice strains,and synergistic effects between Pt and Ni.This rapid liquid-state synthesis demonstrated here holds great potential for scalable and industrial manufacturing of micro-/nano-catalysts.展开更多
Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can r...Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can replenish the propellant for the emitter online,thus prolonging the lifetime of the thruster.In order to gain a deeper understanding of its operating characteristics,the changes in thruster performance before and after propellant replenishment deserve to be scrutinized.In this study,the performance changes of a porous electrowetting ionic liquid electrospray thruster are tested by voltage-current test and time-of-flight mass spectrometry over a long operating time.The experimental results show that asymmetric operation with a negative current less than positive current for a long period of time causes anions to compensate for the emission after accumulation at the emitter,resulting in a phenomenon that the negative current is much larger than positive current.The reason for the difference in emission characteristics between the positive and negative modes is that the plume in the positive mode is quite ionized while the plume in the negative mode contains liquid droplets.This study provides a reference for the selection of operating conditions for ionic liquid electrospray thrusters.展开更多
The water hammer problem is an important issue in the dynamics of liquid propulsion system.This paper aims to use the Lattice Boltzmann Method(LBM)with entropy limiter to study the water hammer problems in propellant ...The water hammer problem is an important issue in the dynamics of liquid propulsion system.This paper aims to use the Lattice Boltzmann Method(LBM)with entropy limiter to study the water hammer problems in propellant feedlines.The dynamic characteristics of valve-closing water hammer and filling water hammer are investigated by this method,and the sensitivity of filling water hammer is analyzed with a single factor sensitivity analysis with 8 factors and 9 levels and a multi-factor sensitivity analysis with L_(27)(3^(13))orthogonal experiment based on range method.It is found that the solving result of LBM with entropy limiter is basically in good agreement with finite volume method,and using the entropy limiter can eliminate numerical oscillations when solving valve-closing water hammer problems and solve the numerical"blow up"when solving filling water hammer problems.It can be seen that the dynamic characteristics of valve-closing water hammer are relatively simple,while there are many factors that affect the filling water hammer and the degree of these effects varies.The effects on the maximum water hammer pressure are relatively uniform,but those on the water hammer response time vary greatly through the skewness analysis.展开更多
The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here...The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here,we proposed a microchannel reaction system for the CO_(2) cycloaddition reaction catalyzed by ionic liquid within an aqueous environment.The effect of liquid flow rate,temperature and residence time on gas-liquid flow pattern,catalytic performance and mass transfer were systematically investigated.The results revealed that the PC generation rate reached 560.11 mmol·ml^(−1)·h^(−1)at a 50 cm of flow distance under reaction conditions of 105℃,2.5 MPa,QG=176 ml·min^(−1) and QL=0.3 ml·min^(−1).Variations in mass transfer rate and reaction rate at different flow distances were experimentally studied.The reaction efficiency gradually decreased with increasing flow distance,which were attributed to the reduction of mass transfer caused by decreasing bubble velocity.Optimizing bubble velocity at an appropriate position enhanced reaction efficiency by improving mass transfer,achieving a 97.7%PC yield within 2.85 min.Furthermore,a kinetic model coupling intrinsic kinetics with gas-liquid mass transfer was developed for CO_(2) cycloaddition reaction.The kinetic model was applied to predict PC reaction rates in microchannel reactors at various temperatures and liquid flow rates,achieving an average relative error of 9.6%.展开更多
The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than prev...The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than previously reported for a recoverable nine-engine liquid-propellant rocket.Based on the Radiative Transfer Equation(RTE),this study employs the discrete transfer method to solve the transient RTE problem using physical properties to describe the problem while avoiding the need to directly solve mathematical equations.The proposed method can effectively determine the radiative heat flux of the flow field and is applicable to problems involving various geometries.Calculations reveal that during the ascent phase of the rocket,the radiative heat flux at the base of the vehicle reaches its maximum in the initial stages of the lift-off,reaching a maximum of~50 kW/m^(2),which is 2.24 times the maximum value during the return phase.During the deceleration stage of re-entry into the atmosphere,the maximum radiative heat flux recorded on the sidewall of the rocket is 29.1 kW/m^(2);the maximum heat flux on the bottom surface is approximately 22.3 kW/m^(2),accounting for 76.6%of that on the rocket's sidewall.This provides a basis for the thermal protection design of the rocket's bottom and walls as well as for the thermal management of cryogenic propellant tanks.Future research will involve ground engine testing and flight experiments to further validate the proposed model.展开更多
Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated fo...Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated for the first time that a chiral metal-organic cage(MOC),[Zn_(6)M_(4)],as a universal chiral recognition material for both multi-mode high-performance liquid chromatography(HPLC) and capillary gas chromatography(GC) enantioseparation.Two novel HPLC CSPs with different bonding arms(CSP-A with a cationic imidazolium bonding arm and CSP-B with an alkyl chain bonding arm) were prepared by clicking of functionalized chiral MOC [Zn_(6)M_(4)] onto thiolated silica via thiol-ene click chemistry.Meanwhile,a capillary GC column statically coated with the chiral MOC [Zn_(6)M_(4)] was also fabricated.The results showed that the chiral MOC exhibits excellent enantioselectivity not only in normal phase HPLC(NP-HPLC) and reversed phase(RP-HPLC) but also in GC,and various racemates were well separated,including alcohols,diols,esters,ketones,ethers,amines,and epoxides.Importantly,CSP-A and CSP-B are complementary to commercially available Chiralcel OD-H and Chiralpak AD-H columns in enantioseparation,which can separate some racemates that could not be or could not well be separated by the two widely used commercial columns,suggesting the great potential of the two prepared CSPs in enantioseparation.This work reveals that the chiral MOC is potential versatile chiral recognition materials for both HPLC and GC,and also paves the way to expand the potential applications of MOCs.展开更多
With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity ...With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity and operational stability.Based on real-time field data and gas-liquid physicochemical analyses,this study elucidates the mechanisms governing liquid loading formation under varying temperature,pressure,and water saturation conditions.An HYSYS model is employed to determine the water dew point,while the Turner model is used to evaluate the critical conditions for liquid holdup.The results indicate that gas water saturation exerts the dominant influence on liquid loading risk,followed by pressure,whereas temperature plays a comparatively minor role.When water saturation exceeds 2%and the operating temperature falls below the dew point,condensation-driven liquid loading increases sharply.To further characterize the spatial distribution of liquid accumulation,a steady-state OLGA model of a DN100 gathering pipeline network is developed to examine the effects of pipe diameter,water saturation,and soil temperature.The simulations show that larger pipe diameters and higher water saturation significantly aggravate liquid holdup,while elevated soil temperature mitigates liquid accumulation.Moreover,the liquid holdup ratio is found to correlate closely with flow regime transitions,confirming its suitability as a key indicator of liquid loading risk.Based on these findings,optimization strategies for pipeline design and operation are proposed.To mitigate liquid loading,the gathering pipeline velocity should be maintained above the critical value of 1.63 m/s,and the gas water content should be strictly controlled below 2%.Under operating conditions representative of the Hancheng block,it is recommended to reduce the pipeline diameter from DN130 to DN100 to enhance self-cleaning capacity.In addition,thermal insulation should be applied during winter operation to maintain the pipe wall temperature above 10◦C,thereby suppressing condensation-induced liquid accumulation.展开更多
基金Project(52276068)supported by the National Natural Science Foundation of China。
文摘This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This research examines the flow of a three-layered viscous fluid,considering the combined influence of heat and solutal buoyancy driven Rayleigh-Bénard convection,as well as thermal and solutal Marangoni convection.The homotopy perturbation method is used to examine and simulate complex fluid flow and transport phenomena,providing important understanding of the fundamental physics and assisting in the optimization of various battery configurations.The inquiry examines the primary elements that influence Marangoni convection and its impact on battery performance,providing insights on possible enhancements in energy storage devices.The findings indicate that the velocity profiles shown graphically exhibit a prominent core zone characterized by the maximum speed,which progressively decreases as it approaches the walls of the channel.This study enhances our comprehension of fluid dynamics and the transmission of heat and mass in intricate systems,which has substantial ramifications for the advancement of sustainable energy solutions.
基金Project supported by the National Natural Science Foundation of China (Grant No. 72174121)the Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learning, and the Soft Science Research Project of Shanghai (Grant No. 22692112600)。
文摘Information plays a crucial role in guiding behavioral decisions during public health emergencies. Individuals communicate to acquire relevant knowledge about an epidemic, which influences their decisions to adopt protective measures.However, whether to disseminate specific information is also a behavioral decision. In light of this understanding, we develop a coupled information–vaccination–epidemic model to depict these co-evolutionary dynamics in a three-layer network. Negative information dissemination and vaccination are treated as separate decision-making processes. We then examine the combined effects of herd and risk motives on information dissemination and vaccination decisions through the lens of game theory. The microscopic Markov chain approach(MMCA) is used to describe the dynamic process and to derive the epidemic threshold. Simulation results indicate that increasing the cost of negative information dissemination and providing timely clarification can effectively control the epidemic. Furthermore, a phenomenon of diminishing marginal utility is observed as the cost of dissemination increases, suggesting that authorities do not need to overinvest in suppressing negative information. Conversely, reducing the cost of vaccination and increasing vaccine efficacy emerge as more effective strategies for outbreak control. In addition, we find that the scale of the epidemic is greater when the herd motive dominates behavioral decision-making. In conclusion, this study provides a new perspective for understanding the complexity of epidemic spreading by starting with the construction of different behavioral decisions.
基金funding support from the National Natural Science Foundation of China (Nos. 42477208 and 52079134)the Natural Science Foundation of Hubei Province, China (No. 2024AFA072)+2 种基金the Youth Innovation Promotion Association CAS (No. 2022332)the National Key R&D Program of China (No. 2024YFF0508203)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety (Nos. SKLGME-JBGS2402 and SKLGME022022)。
文摘Accurate acquisition of the rock stress is crucial for various rock engineering applications.The hollow inclusion (HI) technique is widely used for measuring in-situ rock stress.This technique calculates the stress tensor by measuring strain using an HI strain cell.However,existing analytical solutions for stress calculation based on an HI strain cell in a double-layer medium are not applicable when an HI strain cell is used in a three-layer medium,leading to erroneous stress calculations.To address this issue,this paper presents a method for calculating stress tensors in a three-layer medium using numerical simulations,specifically by obtaining a constitutive matrix that relates strain measurements to stress tensors in a three-layer medium.Furthermore,using Latin hypercube sampling (LHS) and orthogonal experimental design strategies,764 groups of numerical models encompassing various stress measurement scenarios have been established and calculated using FLAC^(3D)software.Finally,a surrogate model based on artificial neural network (ANN) was developed to predict constitutive matrices,achieving a goodness of fit (R^(2)) of 0.999 and a mean squared error (MSE) of 1.254.A software program has been developed from this surrogate model for ease of use in practical engineering applications.The method’s accuracy was verified through numerical simulations,analytical solution and laboratory experiment,demonstrating its effectiveness in calculating stress in a three-layer medium.The surrogate model was applied to calculate mining-induced stress in the roadway roof rock of a coal mine,a typical case for stress measurement in a three-layer medium.Errors in stress calculations arising from the use of existing analytical solutions were corrected.The study also highlights the significant errors associated with using double-layer analytical solutions in a three-layer medium,which could lead to inappropriate engineering design.
基金financial support from the Ministry of Science and Technology of China(2021YFB3800103)Natural Science Foundation of China(U24A6003,52361145847,52172260,52227803,52222212)Chinese Academy of Sciences-Commonwealth Scientific and Industrial Research Organization(CAS-CSIRO)Joint Project(112111KYSB20210017)。
文摘Buried interface passivation is crucial for high-efficiency,stable perovskite solar cells(PSCs).Herein,we design a three-layer passivation structure toward the buried interface of inverted PSCs,consisting of NiO_(x),poly(V-p-TPD)and PFN-Br(V-p-TPD,N,N'-di-p-tolyl-N,-N'-bis(4-vinylphenyl)-[1,1'-biphenyl]-4,4'-diamine;PFN-Br,poly[(9,9-bis(3'-((N,N-dimethyl)-N-ethylammonium)-propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)]dibromide).Typically,in situ poly(V-p-TPD)layer on the NiO_(x) surface was obtained by a simple thermal crosslinking process.This poly(V-p-TPD)/NiO_(x) bilayer structure is beneficial for hole extraction and high-quality perovskite films with larger grain sizes and less lattice distortion.On this basis,the PFN-Br is further introduced as a surface modification layer,which can not only optimize the energy level alignment with the perovskite but also passivate defects and suppress carrier recombination at the perovskite bottom interface.Finally,inverted PSCs based on(FA_(0.95)Cs_(0.05))PbI_(3) present 25.5%efficiency with a low V_(OC)deficit.Besides,the devices could maintain 91.15%of the initial efficiency after being stored at 85℃for 1080 h,indicating excellent thermal stability.This work highlights the potential of a three-layered passivation structure based on crosslinking polymer HTLs for highly efficient and stable PSCs.
文摘In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.
基金supported by the National Natural Science Foundation of China(22278272)Natural Science Foundation of Liaoning Province(2024-MS-129).
文摘Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were introduced as green solvents for separation of 2-MF/MeOH through liquid–liquid equilibrium(LLE)experiment.Three ILs,namely 1-ethyl-3-methylimidazole dihydrogen phosphate([EMIM][H_(2)PO_(4)]),1-propyl-3-methylimidazole dihydrogen phosphate([PMIM][H_(2)PO_(4)])and 1-butyl-3-methylimidazole dihydrogen phosphate([BMIM][H_(2)PO_(4)]),were screened out from 425 candidates using the conductor-like screening model for real solvents(COSMO-RS).Then,the ternary LLE data of 2-MF(1)+MeOH(2)+ILs(3)were determined at 30℃ and 101.32 kPa.Results confirmed[EMIM][H_(2)PO_(4)]as the best performer,achieving a selectivity of 343.86 and a distribution coefficient of 36.66 for MeOH—significantly higher than[PMIM][H_(2)PO_(4)]and[BMIM][H_(2)PO_(4)].The accuracy of the LLE data was verified by Othmer–Tobias and Hand equations(R^(2)>0.90).The non-random two liquid model was used to correlate the experimental data(RMSD<2%).Besides,the combination of electrostatic surfaces potential,independent gradient model based on Hirshfeld partition,mean square displacement and radial distribution functions revealed strong electrostatic interactions between[H_(2)PO_(4)]^(–) and MeOH.Interaction energy analysis further emphasizes the mechanism of MeOH separation from a mixture of 2-MF and MeOH by ILs.This work provides a multiscale strategy for the separation of 2-MF and MeOH azeotropes,highlighting the potential of ILs to improve biofuel purification while reducing energy and environmental costs.
基金supports for this project from the National Natural Science Foundation of China(22378295).
文摘This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization using high-speed camera imaging.The T-junction microchannel has a cross-sectional width of 0.6 mm and a total length of 27.3 mm.The solution of cyclohexane with 2%and 3%mass concentrations of sorbitan trioleate surfactant were used as the continuous phase,and water was used as the dispersed phase.Slug flow,characteristic of squeezing regime,were predominantly observed.The effects of liquid–liquid two-phase flow rate ratio,and dimensionless number on droplet size,and pressure drop were investigated.The squeezing regime was mapped for 0.0005≤Ca_(c)≤0.0052(capillary number)and 0.1≤q≤10(flow rate ratio).The pressure drops of slugs were in the range from 40 Pa to 200 Pa.The slug lengths were measured between 1 mm and 9 mm.A universal flow map dependent on Ca_(c)Re_(d)^(0.5) are projected to investigate the droplet formation behavior in T-junction microchannel.Correlation expressions are proposed to predict pressure drops and the slug lengths for liquid–liquid two-phase flow in a square T-junction microchannel,using dimensionless numbers such as flow rate ratio and capillary number.The result shows that large continuous phase flow rates facilitate smaller slugs,whereas higher dispersed phase flow rates result in longer shorts.
基金financially supported by the National Natural Science Foundation of China(Nos.22005226 and 52203124)Center for Carbon Neutral Chemistry,Institute of Chemistry,Chinese Academy of Sciences(No.CCNC-202402)+1 种基金the Basic and Advanced Research Project from Wuhan Science and Technology Bureau(No.2022013988065201)Hubei Integrative Technology and Innovation Center for Advanced Fiberous Materials,project(No.XC2024G3013)。
文摘As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.
基金supported by the National Natural Science Foundation of China(Grant Nos.U2341281,12272026,12502287)the Natural Science Foundation of Beijing Municipality(Grant No.L248008)。
文摘Liquid metals have garnered widespread attention in the fields of electronics and materials science due to their unique combination of fluidity and electrical conductivity.Conventional liquid metal droplet generators typically rely on piezoelectric actuators to impose mechanical perturbations on the jet to control droplet formation.In this work,we present a new method for generating a uniform and controllable stream of liquid metal microdroplets by applying periodic electrostatic perturbations to the jet.Using a nozzle with an inner diameter of 25??m,we achieved continuous generation of droplets approximately 51μm in diameter at a frequency of 110 kHz.By adjusting the nozzle diameter,flow rate,and the frequency of the applied voltage,the size and spacing of the droplets can be effectively tuned.Moreover,a comparison between experimental observations and theoretical predictions under various conditions demonstrates that the Rayleigh-Plateau instability theory accurately describes the disturbance growth and droplet formation under electric field excitation.Our study provides both theoretical and experimental foundations for the controlled generation of gallium-based liquid metal droplets.
基金funded by the National Natural Science Foundation of China(22308358,22208346,22421003)IPE Project for Frontier Basic Research(QYJC-2023-05)CAS Project for Young Scientists in Basic Research(YSBR-038).
文摘Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the development of melt crystallization is hampered by lacking solid–liquid equilibrium (SLE) data for some isomers.Therefore,the SLE data of both binary and ternary mixtures of 2,3-dimethylphenol (2,3-DMP),3,5-dimethylphenol (3,5-DMP),and 3,4-dimethylphenol (3,4-DMP) were determined by using differential scanning calorimetry in this work.Additionally,crystallographic analysis was conducted to investigate the thermodynamic characteristics of these mixtures.The experimental results indicated that all the systems investigated in this research exhibited eutectic behavior.The experimentally obtained SLE data were well correlated with the Wilson and non-random two-liquid models.The excess thermodynamic functions were calculated to analyze the types and intensities of the molecular interactions occurring in the mixtures.Furthermore,this study developed a model for the correlation between the theoretical crystallization yield and the actual cooling yield and final yield in melt crystallization.This study has furnished reliable data essential for developing and optimizing the melt crystallization process of mixtures of 2,3-DMP,3,5-DMP,and 3,4-DMP.
文摘Pediatric cancers are particularly significant due to their uncommon occurrence in children,driven by a variety of underlying factors.Because of their distinct molecular and genetic makeup,which makes early detection challenging,they are linked to problems.Diagnostic methods like imaging and tissue biopsy are only effective when the tumor has reached a size that can be identified.The liquid biopsy technique,the least intrusive and most convenient diagnostic method,is the subject of this review.It focuses on the significance of single cell analysis in examining uncommon cancer types.The many biomarkers found in bodily fluids and the cancer types they are linked to in children have been assessed,as has the potential route towards early detection and cancer recurrence forecasting.Combining the single cell liquid biopsy with the newest technologies,such as computational and multi-omics approaches,which have improved the efficiency of processing massive and unique genetic data,appears promising.This article discusses on a number of case reports for uncommon pediatric malignancies,such as Neuroblastoma,Medulloblastoma,Wilms Tumor,Rhabdomyosarcoma,Ewing Sarcoma,and Retinoblastoma,as well as their liquid biopsy profiles.Furthermore,the findings raise ethical questions regarding the therapeutic application of the technology as well as possible difficulties related to clinical translation.The likelihood that this single cell liquid biopsy will be clinically validated and eventually used as a routine diagnostic tool for uncommon pediatric cancers will rise with the realistic approach to sensitivity monitoring,specificity upgrading,and optimization.
基金supported by National Key Research and Development Program of China(2022YFB3804902,2022YFB3804900)the National Natural Science Foundation of China(52203226,52161145406,42376045)the Fundamental Research Funds for the Central Universities(2232024Y-01,2232025D-02).
文摘While desalination is a key solution for global freshwater scarcity,its implementation faces environmental challenges due to concentrated brine byproducts mainly disposed of via coastal discharge systems.Solar interfacial evaporation offers sustainable management potential,yet inevitable salt nucleation at evaporation interfaces degrades photothermal conversion and operational stability via light scattering and pathway blockage.Inspired by the mangrove leaf,we propose a photothermal 3D polydopamine and polypyrrole polymerized spacer fabric(PPSF)-based upward hanging model evaporation configuration with a reverse water feeding mechanism.This design enables zero-liquiddischarge(ZLD)desalination through phase-separation crystallization.The interconnected porous architecture and the rough surface of the PPSF enable superior water transport,achieving excellent solar-absorbing efficiency of 97.8%.By adjusting the tilt angle(θ),the evaporator separates the evaporation and salt crystallization zones via controlled capillary-driven brine transport,minimizing heat dissipation from brine discharge.At an optimal tilt angle of 52°,the evaporator reaches an evaporation rate of 2.81 kg m^(−2) h^(−1) with minimal heat loss(0.366 W)under 1-sun illumination while treating a 7 wt%waste brine solution.Furthermore,it sustains an evaporation rate of 2.71 kg m^(−2) h^(−1) over 72 h while ensuring efficient salt recovery.These results highlight a scalable,energy-efficient approach for sustainable ZLD desalination.
基金supported by the National Natural Science Foundation of China(No.12205165)Hebei Province Innovation Ability Improvement Plan Project(No.225676111H).
文摘Structural engineering of Pt-based nanoalloys is crucial for the rational design and manufacturing of high-performance and low-cost electrocatalysts for hydrogen evolution reaction(HER).Here,we reported PtNi nanoparticles with a refined size of 2.71 nm and regular strains loaded on carbon black,synthesized using the high-temperature liquid shock(HTLS)method.This approach offers significant advantages over conventional synthesis methods,including high scalability,rapid reaction rates,and precise control over the size and shape of nanocrystals.Importantly,the synthesized PtNi electrocatalysts demonstrate outstanding catalytic activity and long-term stability for HER,achieving low overpotentials of 19 and 203 mV at current densities of 10 and 1000 mA/cm^(2),respectively.The superior performance can be attributed to the combination of a refined particle size,lattice strains,and synergistic effects between Pt and Ni.This rapid liquid-state synthesis demonstrated here holds great potential for scalable and industrial manufacturing of micro-/nano-catalysts.
基金co-supported by the National Key R&D Program of China(Nos.2020YFC2201103 and 2022YFB4601300)the National Natural Science Foundation of China(No.U22B20120)+1 种基金the Program of Beijing Engineering Research Center of Efficient and Green Aerospace Propulsion Technology,China(No.Lab ASP-2024-09)the Beijing Institute of Technology Research Fund Program for Young Scholars,China。
文摘Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can replenish the propellant for the emitter online,thus prolonging the lifetime of the thruster.In order to gain a deeper understanding of its operating characteristics,the changes in thruster performance before and after propellant replenishment deserve to be scrutinized.In this study,the performance changes of a porous electrowetting ionic liquid electrospray thruster are tested by voltage-current test and time-of-flight mass spectrometry over a long operating time.The experimental results show that asymmetric operation with a negative current less than positive current for a long period of time causes anions to compensate for the emission after accumulation at the emitter,resulting in a phenomenon that the negative current is much larger than positive current.The reason for the difference in emission characteristics between the positive and negative modes is that the plume in the positive mode is quite ionized while the plume in the negative mode contains liquid droplets.This study provides a reference for the selection of operating conditions for ionic liquid electrospray thrusters.
基金supported by the Natural Science BasicResearch Program of Shaanxi,China(No.2021JC-14)。
文摘The water hammer problem is an important issue in the dynamics of liquid propulsion system.This paper aims to use the Lattice Boltzmann Method(LBM)with entropy limiter to study the water hammer problems in propellant feedlines.The dynamic characteristics of valve-closing water hammer and filling water hammer are investigated by this method,and the sensitivity of filling water hammer is analyzed with a single factor sensitivity analysis with 8 factors and 9 levels and a multi-factor sensitivity analysis with L_(27)(3^(13))orthogonal experiment based on range method.It is found that the solving result of LBM with entropy limiter is basically in good agreement with finite volume method,and using the entropy limiter can eliminate numerical oscillations when solving valve-closing water hammer problems and solve the numerical"blow up"when solving filling water hammer problems.It can be seen that the dynamic characteristics of valve-closing water hammer are relatively simple,while there are many factors that affect the filling water hammer and the degree of these effects varies.The effects on the maximum water hammer pressure are relatively uniform,but those on the water hammer response time vary greatly through the skewness analysis.
基金supported by the National Key Projects for Fundamental Research and development of China(2020YFA0710202)the China Postdoctoral Science Foundation(2024M761567)Shandong Postdoctoral Science Foundation(SDCX-ZG-202400271).
文摘The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here,we proposed a microchannel reaction system for the CO_(2) cycloaddition reaction catalyzed by ionic liquid within an aqueous environment.The effect of liquid flow rate,temperature and residence time on gas-liquid flow pattern,catalytic performance and mass transfer were systematically investigated.The results revealed that the PC generation rate reached 560.11 mmol·ml^(−1)·h^(−1)at a 50 cm of flow distance under reaction conditions of 105℃,2.5 MPa,QG=176 ml·min^(−1) and QL=0.3 ml·min^(−1).Variations in mass transfer rate and reaction rate at different flow distances were experimentally studied.The reaction efficiency gradually decreased with increasing flow distance,which were attributed to the reduction of mass transfer caused by decreasing bubble velocity.Optimizing bubble velocity at an appropriate position enhanced reaction efficiency by improving mass transfer,achieving a 97.7%PC yield within 2.85 min.Furthermore,a kinetic model coupling intrinsic kinetics with gas-liquid mass transfer was developed for CO_(2) cycloaddition reaction.The kinetic model was applied to predict PC reaction rates in microchannel reactors at various temperatures and liquid flow rates,achieving an average relative error of 9.6%.
文摘The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than previously reported for a recoverable nine-engine liquid-propellant rocket.Based on the Radiative Transfer Equation(RTE),this study employs the discrete transfer method to solve the transient RTE problem using physical properties to describe the problem while avoiding the need to directly solve mathematical equations.The proposed method can effectively determine the radiative heat flux of the flow field and is applicable to problems involving various geometries.Calculations reveal that during the ascent phase of the rocket,the radiative heat flux at the base of the vehicle reaches its maximum in the initial stages of the lift-off,reaching a maximum of~50 kW/m^(2),which is 2.24 times the maximum value during the return phase.During the deceleration stage of re-entry into the atmosphere,the maximum radiative heat flux recorded on the sidewall of the rocket is 29.1 kW/m^(2);the maximum heat flux on the bottom surface is approximately 22.3 kW/m^(2),accounting for 76.6%of that on the rocket's sidewall.This provides a basis for the thermal protection design of the rocket's bottom and walls as well as for the thermal management of cryogenic propellant tanks.Future research will involve ground engine testing and flight experiments to further validate the proposed model.
基金supported by the National Natural Science Foundation of China (Nos.22064020,22364022,and 22174125)the Applied Basic Research Foundation of Yunnan Province (Nos.202101AT070101 and 202201AT070029)。
文摘Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated for the first time that a chiral metal-organic cage(MOC),[Zn_(6)M_(4)],as a universal chiral recognition material for both multi-mode high-performance liquid chromatography(HPLC) and capillary gas chromatography(GC) enantioseparation.Two novel HPLC CSPs with different bonding arms(CSP-A with a cationic imidazolium bonding arm and CSP-B with an alkyl chain bonding arm) were prepared by clicking of functionalized chiral MOC [Zn_(6)M_(4)] onto thiolated silica via thiol-ene click chemistry.Meanwhile,a capillary GC column statically coated with the chiral MOC [Zn_(6)M_(4)] was also fabricated.The results showed that the chiral MOC exhibits excellent enantioselectivity not only in normal phase HPLC(NP-HPLC) and reversed phase(RP-HPLC) but also in GC,and various racemates were well separated,including alcohols,diols,esters,ketones,ethers,amines,and epoxides.Importantly,CSP-A and CSP-B are complementary to commercially available Chiralcel OD-H and Chiralpak AD-H columns in enantioseparation,which can separate some racemates that could not be or could not well be separated by the two widely used commercial columns,suggesting the great potential of the two prepared CSPs in enantioseparation.This work reveals that the chiral MOC is potential versatile chiral recognition materials for both HPLC and GC,and also paves the way to expand the potential applications of MOCs.
基金supported by PetroChina Coalbed Methane Co.,Ltd.
文摘With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity and operational stability.Based on real-time field data and gas-liquid physicochemical analyses,this study elucidates the mechanisms governing liquid loading formation under varying temperature,pressure,and water saturation conditions.An HYSYS model is employed to determine the water dew point,while the Turner model is used to evaluate the critical conditions for liquid holdup.The results indicate that gas water saturation exerts the dominant influence on liquid loading risk,followed by pressure,whereas temperature plays a comparatively minor role.When water saturation exceeds 2%and the operating temperature falls below the dew point,condensation-driven liquid loading increases sharply.To further characterize the spatial distribution of liquid accumulation,a steady-state OLGA model of a DN100 gathering pipeline network is developed to examine the effects of pipe diameter,water saturation,and soil temperature.The simulations show that larger pipe diameters and higher water saturation significantly aggravate liquid holdup,while elevated soil temperature mitigates liquid accumulation.Moreover,the liquid holdup ratio is found to correlate closely with flow regime transitions,confirming its suitability as a key indicator of liquid loading risk.Based on these findings,optimization strategies for pipeline design and operation are proposed.To mitigate liquid loading,the gathering pipeline velocity should be maintained above the critical value of 1.63 m/s,and the gas water content should be strictly controlled below 2%.Under operating conditions representative of the Hancheng block,it is recommended to reduce the pipeline diameter from DN130 to DN100 to enhance self-cleaning capacity.In addition,thermal insulation should be applied during winter operation to maintain the pipe wall temperature above 10◦C,thereby suppressing condensation-induced liquid accumulation.
