In today's era of continuous advancement in materials science,the properties of materials are constantly being enhanced,and their application fields are also expanding continuously.SAF(Super Absorbent Fiber),one s...In today's era of continuous advancement in materials science,the properties of materials are constantly being enhanced,and their application fields are also expanding continuously.SAF(Super Absorbent Fiber),one such material,stands out.Compared to traditional SAP(Super Absorbent Polymer),SAF boasts a unique fibrous form and exceptional performance,presenting broad application prospects.展开更多
The compact super-fluorescent fiber source （SFS） output spectra variations at different pump currents and under different dose of gamma-ray radiation were measured and compared respectively. The radiation-induced at...The compact super-fluorescent fiber source （SFS） output spectra variations at different pump currents and under different dose of gamma-ray radiation were measured and compared respectively. The radiation-induced attenuation （RIA） self-compensating effect in SFS based on photo-bleaching was found and the general mathematic model of SFS output spectra variations was made. The radiation-induced background attenuation （RIBA） at the pump wavelength was identified to be the main cause of the total output power and spectra variations and the variations can then be compensated by active control of the pump power to enhance the self-compensating effect. With closed-loop feedback control of pump current, double-pass backward （DPB） configuration and spectrum re-shaping technology, an SFS prototype was made and tested. The mean-wavelength stability of about 87.4 ppm and output power instability of less than 5% were achieved under up to 200 krad （Si） gamma-ray irradiation.展开更多
The primariy application of rare - earth spin finishes on PET/PA composite super - fine denier fiber has been studied in this paper. It results in the improvement of fi-ber’s properties, such as increased whiteness, ...The primariy application of rare - earth spin finishes on PET/PA composite super - fine denier fiber has been studied in this paper. It results in the improvement of fi-ber’s properties, such as increased whiteness, brightness and brilliance, effective and uniform spliting of compos-ite fiber into super - fine denier fiber and enhanced dye-ing effect.展开更多
Recently, a tunable fiber Bragg grating(FBG) was developed by using stress-responsive colloidal crystals. In this paper, we have simulated the application of these nanoparticles into the super-structured fiber Bragg g...Recently, a tunable fiber Bragg grating(FBG) was developed by using stress-responsive colloidal crystals. In this paper, we have simulated the application of these nanoparticles into the super-structured fiber Bragg grating(SSFBG) written with perfect sequences derived from a short maximal-length sequence. A tunable SSFBG will be available to overcome the prohibitive temperature variation of the optical codecs. Nevertheless,we presented a method to implement coherent time spreading optical code-division multiple-access(OCDMA) where a unique code(or perfect sequence) can be reused and mixed with different wavelengths to obtain a tunable wavelength-division multiplexing(WDM)system. In order to maximize the binary throughput, we have selected a unique short maximal-length sequence composed of 7 chips that can be tuned with 7 different optical wavelengths. We found thousands of different tunable combinations that presented power contrast ratios(P/C) higher than 12 dB. When a WDM-OCDMA system used 2 different combinations simultaneously, the perfect binary detection with error correction codes was achieved successfully. The tunable SSFBG with colloidal crystals will be a simple and good alternative choice for fiber-to-the-home(FTTH) communications.展开更多
The influences of the anthesis date and the fruiting branch positions on parameters of cotton fiber quality and super-molecular structure were studied. Fiber quality parameters, such as cotton fiber length, micronair,...The influences of the anthesis date and the fruiting branch positions on parameters of cotton fiber quality and super-molecular structure were studied. Fiber quality parameters, such as cotton fiber length, micronair, maturity and fiber strength deteriorated with postponing the anthesis date and decreasing temperature. When anthesis happened on the same date, the fruiting branch positions affected the fiber quality parameters, and the fiber quality parameters of the lower portion turned out to be higher than that of the upper portion, although the difference was insignificant. The super-molecular structure of the lower portion turned out to be superior to that of the upper portion at the early anthesis date and high temperature, which is in accordance with what was mentioned above, but the fruiting branch positions did not affect the impact of the anthesis date on the super-molecular structure.展开更多
The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and al...The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and alternating currents, dielectric parameters of ε, and ε,, were measured. It is shown that specific resistance and dielectric parameters of super-thin basalt fiber change essentially after hydrochloric or sulphuric acid treatment. The temperature dependences of these parameters were studied, too, and their non–monotonic behavior was observed. The probable variation of mentioned STBF parameters is explained by different water absorption capacity of pores as a result of acid treatment.展开更多
A novel super-hybrid composite (NSHC) is prepared with three-dimension reticulated SiC ceramic (3DRC), high performance carbon fibers and modified phenolic resin (BPR) in this paper. Ablation performance of super-hybr...A novel super-hybrid composite (NSHC) is prepared with three-dimension reticulated SiC ceramic (3DRC), high performance carbon fibers and modified phenolic resin (BPR) in this paper. Ablation performance of super-hybrid composite is studied. The results show that the NSHC has less linear ablation rate compared with pure BPR and CF/BPR composite, for example, its linear ablation rate is 50% of CF/BPR at the same fiber content. Mass ablation rate of the NSHC is slightly lower than that of pure BPR and CF/BPR composite because of their difference in the density. Scanning electron microscopic analysis indicates that 3DRC can increase anti-erosion capacity of materials because its special reticulated structure can control the deformation of materials and strengthen the stability of integral structure.展开更多
随着网络业务流量的增长,通信业务对密集波分复用(DWDM)的性能要求越来越高。为了提高传输效率,传输频谱逐渐向C+L Band传输扩展,Super C Band传输应运而生,但目前与之对应的掺铒光纤放大器(EDFA)相关研究较少。针对这一问题,文章提出...随着网络业务流量的增长,通信业务对密集波分复用(DWDM)的性能要求越来越高。为了提高传输效率,传输频谱逐渐向C+L Band传输扩展,Super C Band传输应运而生,但目前与之对应的掺铒光纤放大器(EDFA)相关研究较少。针对这一问题,文章提出了一种针对Super C Band传输的EDFA结构,基于Giles模型,分析了EDFA在Super C Band的特性,利用多级泵浦机制,设计了一种可以在Super C Band范围内进行放大的EDFA。结果表明,在-9.3 dBm入光时,该EDFA可以实现26 dB的平坦增益,16.7 dBm的输出功率,此时噪声指数小于5 dB,Ripple小于0.1 dB。并且根据需要,在入光处于-15.0~-3.5 dBm范围内时,通过调节泵浦功率与可调衰减器,均能够实现7~26 dB的可调增益。该EDFA可应用于5G传输和数据中心之间光纤通信等场合。展开更多
The road surface of cement concrete in highway is easily cracked and even destroyed due to inhomogeneous subsiding of the road foundation. In this work, a super-thin-coating material is prepared in order to repair the...The road surface of cement concrete in highway is easily cracked and even destroyed due to inhomogeneous subsiding of the road foundation. In this work, a super-thin-coating material is prepared in order to repair the destroyed thin road surface, in which polymers and steel-fiber are added into ordinary concrete to form a steel fiber reinforced polymer-cement-based composite, the composite was successfully used to repair road surface. Microstructure and mechanical properties of the composites are measured and analyzed.展开更多
A novel super-hybrid composite (NSHC) was boron-modified phenolic resin (BPR) with three-dimensional reticulated SiC ceramic (3DRC) and high silica fibers. Ablation performance of the NSHC was studied. The results sho...A novel super-hybrid composite (NSHC) was boron-modified phenolic resin (BPR) with three-dimensional reticulated SiC ceramic (3DRC) and high silica fibers. Ablation performance of the NSHC was studied. The results show that the linear ablation rate of NSHC was lower than that of pure BPR and the high silica/BPR composite. Its linear ablation rate is 1/17 of the high silica/BPR. Mass ablation rate of the NSHC is very close to that of the pure BPR and the high silica/BPR composite. Scanning electron microscope (SEM) analysis indicates that 3DRC has scarcely changed its shape at the ablation temperature. Its special reticulated structure can restrict the materials deformation and prevent high velocity heat flow from eroding the surface of the materials largely and thus increase ablation resistance of the NSHC.展开更多
文摘In today's era of continuous advancement in materials science,the properties of materials are constantly being enhanced,and their application fields are also expanding continuously.SAF(Super Absorbent Fiber),one such material,stands out.Compared to traditional SAP(Super Absorbent Polymer),SAF boasts a unique fibrous form and exceptional performance,presenting broad application prospects.
基金supported by the Special Fund for Development of National Major Scientific Instruments of China(Grant No.2013YQ04081504)the Program for Innovative Research Team in University,China(Grant No.IRT 1203)
文摘The compact super-fluorescent fiber source （SFS） output spectra variations at different pump currents and under different dose of gamma-ray radiation were measured and compared respectively. The radiation-induced attenuation （RIA） self-compensating effect in SFS based on photo-bleaching was found and the general mathematic model of SFS output spectra variations was made. The radiation-induced background attenuation （RIBA） at the pump wavelength was identified to be the main cause of the total output power and spectra variations and the variations can then be compensated by active control of the pump power to enhance the self-compensating effect. With closed-loop feedback control of pump current, double-pass backward （DPB） configuration and spectrum re-shaping technology, an SFS prototype was made and tested. The mean-wavelength stability of about 87.4 ppm and output power instability of less than 5% were achieved under up to 200 krad （Si） gamma-ray irradiation.
文摘The primariy application of rare - earth spin finishes on PET/PA composite super - fine denier fiber has been studied in this paper. It results in the improvement of fi-ber’s properties, such as increased whiteness, brightness and brilliance, effective and uniform spliting of compos-ite fiber into super - fine denier fiber and enhanced dye-ing effect.
文摘Recently, a tunable fiber Bragg grating(FBG) was developed by using stress-responsive colloidal crystals. In this paper, we have simulated the application of these nanoparticles into the super-structured fiber Bragg grating(SSFBG) written with perfect sequences derived from a short maximal-length sequence. A tunable SSFBG will be available to overcome the prohibitive temperature variation of the optical codecs. Nevertheless,we presented a method to implement coherent time spreading optical code-division multiple-access(OCDMA) where a unique code(or perfect sequence) can be reused and mixed with different wavelengths to obtain a tunable wavelength-division multiplexing(WDM)system. In order to maximize the binary throughput, we have selected a unique short maximal-length sequence composed of 7 chips that can be tuned with 7 different optical wavelengths. We found thousands of different tunable combinations that presented power contrast ratios(P/C) higher than 12 dB. When a WDM-OCDMA system used 2 different combinations simultaneously, the perfect binary detection with error correction codes was achieved successfully. The tunable SSFBG with colloidal crystals will be a simple and good alternative choice for fiber-to-the-home(FTTH) communications.
文摘The influences of the anthesis date and the fruiting branch positions on parameters of cotton fiber quality and super-molecular structure were studied. Fiber quality parameters, such as cotton fiber length, micronair, maturity and fiber strength deteriorated with postponing the anthesis date and decreasing temperature. When anthesis happened on the same date, the fruiting branch positions affected the fiber quality parameters, and the fiber quality parameters of the lower portion turned out to be higher than that of the upper portion, although the difference was insignificant. The super-molecular structure of the lower portion turned out to be superior to that of the upper portion at the early anthesis date and high temperature, which is in accordance with what was mentioned above, but the fruiting branch positions did not affect the impact of the anthesis date on the super-molecular structure.
文摘The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and alternating currents, dielectric parameters of ε, and ε,, were measured. It is shown that specific resistance and dielectric parameters of super-thin basalt fiber change essentially after hydrochloric or sulphuric acid treatment. The temperature dependences of these parameters were studied, too, and their non–monotonic behavior was observed. The probable variation of mentioned STBF parameters is explained by different water absorption capacity of pores as a result of acid treatment.
文摘A novel super-hybrid composite (NSHC) is prepared with three-dimension reticulated SiC ceramic (3DRC), high performance carbon fibers and modified phenolic resin (BPR) in this paper. Ablation performance of super-hybrid composite is studied. The results show that the NSHC has less linear ablation rate compared with pure BPR and CF/BPR composite, for example, its linear ablation rate is 50% of CF/BPR at the same fiber content. Mass ablation rate of the NSHC is slightly lower than that of pure BPR and CF/BPR composite because of their difference in the density. Scanning electron microscopic analysis indicates that 3DRC can increase anti-erosion capacity of materials because its special reticulated structure can control the deformation of materials and strengthen the stability of integral structure.
文摘随着网络业务流量的增长,通信业务对密集波分复用(DWDM)的性能要求越来越高。为了提高传输效率,传输频谱逐渐向C+L Band传输扩展,Super C Band传输应运而生,但目前与之对应的掺铒光纤放大器(EDFA)相关研究较少。针对这一问题,文章提出了一种针对Super C Band传输的EDFA结构,基于Giles模型,分析了EDFA在Super C Band的特性,利用多级泵浦机制,设计了一种可以在Super C Band范围内进行放大的EDFA。结果表明,在-9.3 dBm入光时,该EDFA可以实现26 dB的平坦增益,16.7 dBm的输出功率,此时噪声指数小于5 dB,Ripple小于0.1 dB。并且根据需要,在入光处于-15.0~-3.5 dBm范围内时,通过调节泵浦功率与可调衰减器,均能够实现7~26 dB的可调增益。该EDFA可应用于5G传输和数据中心之间光纤通信等场合。
文摘The road surface of cement concrete in highway is easily cracked and even destroyed due to inhomogeneous subsiding of the road foundation. In this work, a super-thin-coating material is prepared in order to repair the destroyed thin road surface, in which polymers and steel-fiber are added into ordinary concrete to form a steel fiber reinforced polymer-cement-based composite, the composite was successfully used to repair road surface. Microstructure and mechanical properties of the composites are measured and analyzed.
文摘A novel super-hybrid composite (NSHC) was boron-modified phenolic resin (BPR) with three-dimensional reticulated SiC ceramic (3DRC) and high silica fibers. Ablation performance of the NSHC was studied. The results show that the linear ablation rate of NSHC was lower than that of pure BPR and the high silica/BPR composite. Its linear ablation rate is 1/17 of the high silica/BPR. Mass ablation rate of the NSHC is very close to that of the pure BPR and the high silica/BPR composite. Scanning electron microscope (SEM) analysis indicates that 3DRC has scarcely changed its shape at the ablation temperature. Its special reticulated structure can restrict the materials deformation and prevent high velocity heat flow from eroding the surface of the materials largely and thus increase ablation resistance of the NSHC.
