The sticking behavior of pellets affects the continuity of production in hydrogen-based shaft furnace.The coupling influences of V_(2)O_(5) and reduction temperature on reduction sticking behavior and mechanism evolut...The sticking behavior of pellets affects the continuity of production in hydrogen-based shaft furnace.The coupling influences of V_(2)O_(5) and reduction temperature on reduction sticking behavior and mechanism evolution of pellets under hydrogen atmosphere are investigated.The increase in V_(2)O_(5) addition aggravated the reduction sticking behavior,which is attributed to the combined functions of the development of unique interwoven structure in the metallic iron interconnections at the reduction sticking interface and the deterioration of reduction swelling behavior of pellets.In addition,the strength of metallic iron interconnections enhanced and reduction sticking behavior aggravated with the increase in reduction temperature.Importantly,compared to other reduction temperatures,the reduction sticking behavior of pellets was most significantly aggravated with the increase in V_(2)O_(5) addition at 1000℃.And the values of sticking index increased from 10.22%to 15.36% as the V_(2)O_(5) addition increased from 0 to 1.00 wt.%at 1000℃.展开更多
Direct reduction based on hydrogen metallurgical gas-based shaft furnace is a promising technology for the efficient and low-carbon smelting of vanadium-titanium magnetite.However,in this process,the sticking of pelle...Direct reduction based on hydrogen metallurgical gas-based shaft furnace is a promising technology for the efficient and low-carbon smelting of vanadium-titanium magnetite.However,in this process,the sticking of pellets occurs due to the aggregation of metal-lic iron between the contact surfaces of adjacent pellets and has a serious negative effect on the continuous operation.This paper presents a detailed experimental study of the effect of TiO2 on the sticking behavior of pellets during direct reduction under different conditions.Results showed that the sticking index(SI)decreased linearly with the increasing TiO2 addition.This phenomenon can be attributed to the increase in unreduced FeTiO3 during reduction,leading to a decrease in the number and strength of metallic iron interconnections at the sticking interface.When the TiO2 addition amount was raised from 0 to 15wt%at 1100°C,the SI also increased from 0.71%to 59.91%.The connection of the slag phase could be attributed to the sticking at a low reduction temperature,corresponding to the low sticking strength.Moreover,the interconnection of metallic iron became the dominant factor,and the SI increased sharply with the increase in re-duction temperature.TiO2 had a greater effect on SI at a high reduction temperature than at a low reduction temperature.展开更多
Objective: To study the application effect of mouth-opening training sticks combined with oral massage on patients with mouth-opening difficulty after treatment for head and neck cancer. Methods: Using convenient samp...Objective: To study the application effect of mouth-opening training sticks combined with oral massage on patients with mouth-opening difficulty after treatment for head and neck cancer. Methods: Using convenient sampling, 60 patients with mouth-opening difficulty after treatment for head and neck cancer admitted to the Oncology Department from February 2022 to October 2023 were selected for a 2-week exercise and nursing program. The patients were divided into a control group (February 1, 2022 to November 30, 2022) and an observation group (December 1, 2022 to October 31, 2023), with 30 patients in each group. The control group underwent routine mouth-opening functional exercises combined with cork for oral support training, while the observation group underwent routine mouth-opening functional exercises combined with oral massage and mouth-opening training sticks for oral support training. The mouth-opening degree, mouth-opening difficulty level, comfort level, compliance, and quality of life were observed in both groups. Results: Before the intervention, there were no statistically significant differences in mouth-opening degree and mouth-opening difficulty level between the two groups (P > 0.05). After the intervention, the mouth-opening degree, mouth-opening difficulty level, oral comfort level, compliance, and QLICP-HN scores in the observation group were all better than those in the control group, with statistically significant differences (P < 0.05). Conclusion: The combination of mouth-opening training sticks and oral massage with mouth-opening functional exercises can effectively improve the degree of mouth-opening difficulty, enhance oral comfort, increase compliance with mouth-opening exercises, and improve quality of life.展开更多
Thermal-force driving of roll profile electromagnetic control technology(RPECT),which can be used to adjust the roll profile,can be affected by the sequential temperature rise between the electromagnetic stick(ES)and ...Thermal-force driving of roll profile electromagnetic control technology(RPECT),which can be used to adjust the roll profile,can be affected by the sequential temperature rise between the electromagnetic stick(ES)and electromagnetic control roll.Due to the limited space of ES and induction coil,the cross-sectional area of induction coil can be inevitably affected by changing the size of the ES induction zone,which can further change the energy input under the same electromagnetic parameters,the temperature rising effect and the bulging ability.To investigate this phenomenon,the effects of the radius of the induction zone on the thermal-force contribution ratio,the heating ability of ES and the temperature distribution were analyzed through an electromagnetic-thermal-structural finite element model.To ensure that the results are applicable to RPECT,the thermal energy conversion ability and thermal-force roll crown control ability under different lengths of the induction zone were analyzed.It was found that whether the current density regulation mode or the current frequency regulation mode is adopted,the cases with 20 or 25 mm radius of the induction zone have the great thermal energy conversion ability and the good thermal-force roll crown control ability.The reasonable adjustment of the length of the induction zone can reduce the radius required for the maximum energy efficiency regulation.Combined with the results of the simulation analysis,the optimization of ES based on the control ability maximization requirement is achieved,which provides the base for the design and configuration of ES in RPECT.展开更多
Purpose: Needle-stick injury (NSI) is one of the most potential occupational hazards for healthcare workers because of the transmission of blood-borne pathogens. As per recent data, around 30 lakh healthcare workers s...Purpose: Needle-stick injury (NSI) is one of the most potential occupational hazards for healthcare workers because of the transmission of blood-borne pathogens. As per recent data, around 30 lakh healthcare workers sustain Needle stick injuries each year. This study was conducted to assess healthcare workers’ knowledge, attitude and practices regarding needle stick injury. Materials & Methods: A cross-sectional study was conducted in a Tertiary Care Hospital over the period of 3 months. The study population consisted of Intern Doctors, Post Graduate resident Doctors, Staff Nurses, laboratory technicians of Government Medical College and New Civil Hospital, Surat (n = 300). The data were collected using a self-administered questionnaire via the means of Google Forms. Questionnaire was made with prior review literature. The data obtained were entered and analysed in Microsoft Excel. Results: The prevalence of NSI in our study was 46%, with a higher prevalence among the PG residents (72%). Overall scores regarding knowledge and attitude were better in PG residents (knowledge score > 7 in 71% and Attitude Score > 7 in 68% of PG Residents). Even though the PG residents scored highest in the knowledge category, the majority of them suffered needle stick injuries as a result of poor practice scores. Among those who had NSI (n = 139/300), 70% of study participants had superficial injuries, only 9% reported the incident, 18% got medical attention within 2 hours of the incident, and 7% followed up to recheck their viral markers status. Most incidents of NSI were due to hypodermic needles while recapping needles. Conclusion: Exposure to needle stick injuries and their underreporting remains a common problem. It is imperative that healthcare workers receive regular training on the proper handling of sharp objects. We can also draw the conclusion that preventing NSIs requires putting knowledge into practice.展开更多
The effects of rice transplanters＇ transplanting settings（plant spacing and finger sticking area） on rice yield were investigated in two early-season rice cultivars：hybrid rice cultivar（Zhuliangyou 819） and conv...The effects of rice transplanters＇ transplanting settings（plant spacing and finger sticking area） on rice yield were investigated in two early-season rice cultivars：hybrid rice cultivar（Zhuliangyou 819） and conventional rice cultivar（Zhongjiazao 17）.The results showed that,different transplanting settings resulted in different numbers of transplanted basic seedlings,and the rice yield was significantly correlated with the number of transplanted basic seedlings.The number of transplanted basic seedlings increased with the decrease of plant spacing and the increase of finger sticking area.The rate of lost hills of machine transplanting decreased with the increase of finger sticking area.The leaf area index and amount of dry matter accumulation were highly correlated with the number of transplanted basic seedlings.The average yield of the rice transplanted with a plant spacing of11.5 cm was higher than that with a plant spacing of 13.8 cm.In the field transplanted with the rice under the plant spacing of 13.8 cm,the rice yield increased with the increase of finger sticking area,and the finger sticking area of 2.23 cm2 showed the highest rice yield of 8 174.16 kg/hm2 of Zhuliangyou 819 and 7 925.54kg/hm2 of Zhongjiaozao17.In the field transplanted with the rice under the plant spacing of 11.5 cm,the rice yield was the highest with the finger sticking area of 1.83 cm2,and then decreased with the large finger sticking area.Under the plant spacing of 11.5 cm,the highest rice yields of Zhuliangyou 819 and Zhongjiaozao17 were 8 492.94 kg/hm2 and 8 000.23 kg/hm2,respectively.Therefore,the preferred machine transplanting settings for double-season early rice are a plant spacing of11.5 cm and a finger sticking area of 1.83 cm2,while the finger sticking area should be increased to 2.23 cm2 for conventional rice cultivars.展开更多
In the paper, the effects of linear expansion coefficient and basic index of melting slag on the detachability of self shielded flux cored electrode (SSFCE) are investigated. An equation is obtained on the principles ...In the paper, the effects of linear expansion coefficient and basic index of melting slag on the detachability of self shielded flux cored electrode (SSFCE) are investigated. An equation is obtained on the principles of ceramics and mineralography which predict the detachability of basic SSFCE. In addition, stick slag mechanism of SSFCE is analyzed.展开更多
This paper makes use of the method of testing and measuring the human body tibia by using2-D moire interferometry of sticking film. hased on the J'--y direction moire patterns recorded synchronously by 2-D optical...This paper makes use of the method of testing and measuring the human body tibia by using2-D moire interferometry of sticking film. hased on the J'--y direction moire patterns recorded synchronously by 2-D optical path,the elastic constant,strain and displacement of the tibia are measured.Compared with the electric measuring method the error is samll and the sensitivity is high.展开更多
Objective To compare the differences of effect on infantile amblyopia treated with auricular point sticking therapy and regular comprehensive therapy of western medicine.Methods Two hundreds and thirty cases of amblyo...Objective To compare the differences of effect on infantile amblyopia treated with auricular point sticking therapy and regular comprehensive therapy of western medicine.Methods Two hundreds and thirty cases of amblyopia patients were randomly divided into two groups,namely the group of auricular point sticking therapy,which had 120 cases（212 eyes）,and the group of comprehensive therapy,which had 110 cases（194 eyes）.The seed of Semen Vaccariae was applied at the ear point such as the eye,ear Shenmen,the liver,the spleen and the kidney.Regular comprehensive therapy of western medicine included covering method,vision corrected with glasses and fine exercise.Vision improvements of the two groups were observed with a three-year follow up.Results The effective rates of the auricular point sticking therapy group and comprehensive therapy group of ametropic amblyopia were 81.0%（64/79） and 52.2%（36/69）,respectively.The effective rates of anisometropic amblyopia of the two groups were 73.1%（49/67） and 47.7%（31/65）,respectively.And the effective rates of the two groups of strabismic amblyopia were 71.2%（47/66） and 45.0%（27/60）,respectively.The therapeutic effects of auricular point sticking therapy on all kinds of amblyopia were better than those of the comprehensive therapy（all P0.05）.Conclusion The effect of auricular point sticking therapy on infantile amblyopia is better than that of regular comprehensive therapy of western medicine,which can obviously improve the vision of the patients with easy manipulations.展开更多
Of 149 cases.infantile diarrhea were treated with Zhou’s multiapplied rapid-sticking herbomoxa-pen.The main acupoints selected were Auriculoapex,Tianshu(ST 25),Zusanli(ST 36),Shenshu(BL 23),etc.TWO groups were observ...Of 149 cases.infantile diarrhea were treated with Zhou’s multiapplied rapid-sticking herbomoxa-pen.The main acupoints selected were Auriculoapex,Tianshu(ST 25),Zusanli(ST 36),Shenshu(BL 23),etc.TWO groups were observed,32 cases from the 149 cases as therapid-sticking moxatherapy(RSMT)group who suffered from the acute diarrhea without any thera-peutics before,and the other 35 cases with western medicine as the control group.Results showedthat the recovering rate and the average therapeutic course of healing in RSMT group were higher andshorter than that in control one(P【0.05;P【0.01),even without marked difference of the total ef-fective rates between the two groups(P】0.05).Of 149 cases with RSMT,the therapeutic effect onacute ones was better than those on delayed and chronic ones(P【0.05),yet the difference was notmarked in therapeutic effects between the etiological causes of infections and non-infections(P】 0.0.5).It is therefore worthy of popularizing RSMT due to its remarked curative results without anyside-effect,simply-manipulated and well-accepted features.展开更多
External contamination particles or wear particles corroded by a valve body are mixed into the fluid. As a result, when the fluid enters the fitting clearance of the valve core, it can cause an increase in resistance ...External contamination particles or wear particles corroded by a valve body are mixed into the fluid. As a result, when the fluid enters the fitting clearance of the valve core, it can cause an increase in resistance and lead to sticking failure of the valve core. This paper analyzes solid-liquid flow characteristics in fitting clearances and valve-core sticking based on the Euler-Euler model, using a typical hydraulic valve as an example. The impact of particle concentration and diameter on flow characteristics and valve-core sticking force was analyzed. The highest volume fraction of particles was in the pressureequalizing groove(PEG), with peak values increasing as the particle diameter increased. The sticking force increased with increasing particle concentration. When the particle diameter was 12 μm, the sticking force was the largest, making this the sensitive particle diameter. Particle distribution and valve-core sticking force were compared for oval, rectangular, and triangular PEGs. The fluid-deflection angles in oval and rectangular PEGs were larger, and their values were 32.83° and 39.15°, respectively. The fluid-deflection angle in the triangular PEG was relatively small, less than 50% that of the oval or rectangular PEGs. The particle-volume-fraction peaks in oval, rectangular, and triangular PEGs were 0.0317, 0.0316, and 0.0312, respectively. The sticking forces of oval, rectangular, and triangular PEGs were 4.796, 4.802, and 4.757 N, respectively when the particle diameter was 12 μm. This work provides a reference for design and research aimed at reducing valve-core sticking.展开更多
The sticking phenomenon during hot rolling of SUS 430 ferritic stainless steel was investigated by means of a two-disc type high-temperature wear tester. The test results indicate that sticking particles on the surfac...The sticking phenomenon during hot rolling of SUS 430 ferritic stainless steel was investigated by means of a two-disc type high-temperature wear tester. The test results indicate that sticking particles on the surfaces of high chromium steel （HiCr） and high-speed steel （HSS） rolls undergo nucleation, growth, and saturation stages. Grooves on the roll surface generated by grinding provide nucleation sites for sticking particles. The number of sticking particles on the HiCr roll surface is greater than that on the HSS roll surface. The average surface roughnesses （Ra） of HiCr and HSS rolls change from 0.502 and 0.493 μm at the initial stage to 0.837 and 0.530 μm at the saturation stage, respectively. The test further proves that the sticking behavior is strongly dependent on roll materials, and the HSS roll is more benefi- cial to prevent particles sticking compared with the HiCr roll under the same hot-rolling conditions.展开更多
基金supported by the authors are especially grateful to the National Natural Science Foundation of China(Grant No.51904063)the Key Program of National Natural Science Foundation of China(No.U23A20608)+6 种基金Fundamental Research Funds for the Central Universities(N2025023,N2225046)Postdoctoral Followship Program of CPSF(GZC20230392)Science&Technology Plan Project of Liaoning Province(2022JH24/10200027)Science&Technology Plan Project of Hebei Province(23314601L)Science and Technology Program of Liaoning of China(2023JH2/101700304)China Postdoctoral Science Foundation(2023M740551)Liaoning Province Science and Technology Plan Joint Program(Key Research and Development Program Project)(2023JH2/101800058).
文摘The sticking behavior of pellets affects the continuity of production in hydrogen-based shaft furnace.The coupling influences of V_(2)O_(5) and reduction temperature on reduction sticking behavior and mechanism evolution of pellets under hydrogen atmosphere are investigated.The increase in V_(2)O_(5) addition aggravated the reduction sticking behavior,which is attributed to the combined functions of the development of unique interwoven structure in the metallic iron interconnections at the reduction sticking interface and the deterioration of reduction swelling behavior of pellets.In addition,the strength of metallic iron interconnections enhanced and reduction sticking behavior aggravated with the increase in reduction temperature.Importantly,compared to other reduction temperatures,the reduction sticking behavior of pellets was most significantly aggravated with the increase in V_(2)O_(5) addition at 1000℃.And the values of sticking index increased from 10.22%to 15.36% as the V_(2)O_(5) addition increased from 0 to 1.00 wt.%at 1000℃.
基金the National Natural Science Foundation of China(No.51904063)the Science and Technology Plan Project of Liaoning Province,China(No.2022JH24/10200027)+1 种基金the Key Research and Development Project of Hebei Province,China(No.21314001D)the seventh batch of the Ten Thousand Talents Plan(No.ZX20220553).
文摘Direct reduction based on hydrogen metallurgical gas-based shaft furnace is a promising technology for the efficient and low-carbon smelting of vanadium-titanium magnetite.However,in this process,the sticking of pellets occurs due to the aggregation of metal-lic iron between the contact surfaces of adjacent pellets and has a serious negative effect on the continuous operation.This paper presents a detailed experimental study of the effect of TiO2 on the sticking behavior of pellets during direct reduction under different conditions.Results showed that the sticking index(SI)decreased linearly with the increasing TiO2 addition.This phenomenon can be attributed to the increase in unreduced FeTiO3 during reduction,leading to a decrease in the number and strength of metallic iron interconnections at the sticking interface.When the TiO2 addition amount was raised from 0 to 15wt%at 1100°C,the SI also increased from 0.71%to 59.91%.The connection of the slag phase could be attributed to the sticking at a low reduction temperature,corresponding to the low sticking strength.Moreover,the interconnection of metallic iron became the dominant factor,and the SI increased sharply with the increase in re-duction temperature.TiO2 had a greater effect on SI at a high reduction temperature than at a low reduction temperature.
文摘Objective: To study the application effect of mouth-opening training sticks combined with oral massage on patients with mouth-opening difficulty after treatment for head and neck cancer. Methods: Using convenient sampling, 60 patients with mouth-opening difficulty after treatment for head and neck cancer admitted to the Oncology Department from February 2022 to October 2023 were selected for a 2-week exercise and nursing program. The patients were divided into a control group (February 1, 2022 to November 30, 2022) and an observation group (December 1, 2022 to October 31, 2023), with 30 patients in each group. The control group underwent routine mouth-opening functional exercises combined with cork for oral support training, while the observation group underwent routine mouth-opening functional exercises combined with oral massage and mouth-opening training sticks for oral support training. The mouth-opening degree, mouth-opening difficulty level, comfort level, compliance, and quality of life were observed in both groups. Results: Before the intervention, there were no statistically significant differences in mouth-opening degree and mouth-opening difficulty level between the two groups (P > 0.05). After the intervention, the mouth-opening degree, mouth-opening difficulty level, oral comfort level, compliance, and QLICP-HN scores in the observation group were all better than those in the control group, with statistically significant differences (P < 0.05). Conclusion: The combination of mouth-opening training sticks and oral massage with mouth-opening functional exercises can effectively improve the degree of mouth-opening difficulty, enhance oral comfort, increase compliance with mouth-opening exercises, and improve quality of life.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.U1560206 and 51975510)the Natural Science Foundation of China in Hebei Province(Grant No.E2021203129).
文摘Thermal-force driving of roll profile electromagnetic control technology(RPECT),which can be used to adjust the roll profile,can be affected by the sequential temperature rise between the electromagnetic stick(ES)and electromagnetic control roll.Due to the limited space of ES and induction coil,the cross-sectional area of induction coil can be inevitably affected by changing the size of the ES induction zone,which can further change the energy input under the same electromagnetic parameters,the temperature rising effect and the bulging ability.To investigate this phenomenon,the effects of the radius of the induction zone on the thermal-force contribution ratio,the heating ability of ES and the temperature distribution were analyzed through an electromagnetic-thermal-structural finite element model.To ensure that the results are applicable to RPECT,the thermal energy conversion ability and thermal-force roll crown control ability under different lengths of the induction zone were analyzed.It was found that whether the current density regulation mode or the current frequency regulation mode is adopted,the cases with 20 or 25 mm radius of the induction zone have the great thermal energy conversion ability and the good thermal-force roll crown control ability.The reasonable adjustment of the length of the induction zone can reduce the radius required for the maximum energy efficiency regulation.Combined with the results of the simulation analysis,the optimization of ES based on the control ability maximization requirement is achieved,which provides the base for the design and configuration of ES in RPECT.
文摘Purpose: Needle-stick injury (NSI) is one of the most potential occupational hazards for healthcare workers because of the transmission of blood-borne pathogens. As per recent data, around 30 lakh healthcare workers sustain Needle stick injuries each year. This study was conducted to assess healthcare workers’ knowledge, attitude and practices regarding needle stick injury. Materials & Methods: A cross-sectional study was conducted in a Tertiary Care Hospital over the period of 3 months. The study population consisted of Intern Doctors, Post Graduate resident Doctors, Staff Nurses, laboratory technicians of Government Medical College and New Civil Hospital, Surat (n = 300). The data were collected using a self-administered questionnaire via the means of Google Forms. Questionnaire was made with prior review literature. The data obtained were entered and analysed in Microsoft Excel. Results: The prevalence of NSI in our study was 46%, with a higher prevalence among the PG residents (72%). Overall scores regarding knowledge and attitude were better in PG residents (knowledge score > 7 in 71% and Attitude Score > 7 in 68% of PG Residents). Even though the PG residents scored highest in the knowledge category, the majority of them suffered needle stick injuries as a result of poor practice scores. Among those who had NSI (n = 139/300), 70% of study participants had superficial injuries, only 9% reported the incident, 18% got medical attention within 2 hours of the incident, and 7% followed up to recheck their viral markers status. Most incidents of NSI were due to hypodermic needles while recapping needles. Conclusion: Exposure to needle stick injuries and their underreporting remains a common problem. It is imperative that healthcare workers receive regular training on the proper handling of sharp objects. We can also draw the conclusion that preventing NSIs requires putting knowledge into practice.
文摘The effects of rice transplanters＇ transplanting settings（plant spacing and finger sticking area） on rice yield were investigated in two early-season rice cultivars：hybrid rice cultivar（Zhuliangyou 819） and conventional rice cultivar（Zhongjiazao 17）.The results showed that,different transplanting settings resulted in different numbers of transplanted basic seedlings,and the rice yield was significantly correlated with the number of transplanted basic seedlings.The number of transplanted basic seedlings increased with the decrease of plant spacing and the increase of finger sticking area.The rate of lost hills of machine transplanting decreased with the increase of finger sticking area.The leaf area index and amount of dry matter accumulation were highly correlated with the number of transplanted basic seedlings.The average yield of the rice transplanted with a plant spacing of11.5 cm was higher than that with a plant spacing of 13.8 cm.In the field transplanted with the rice under the plant spacing of 13.8 cm,the rice yield increased with the increase of finger sticking area,and the finger sticking area of 2.23 cm2 showed the highest rice yield of 8 174.16 kg/hm2 of Zhuliangyou 819 and 7 925.54kg/hm2 of Zhongjiaozao17.In the field transplanted with the rice under the plant spacing of 11.5 cm,the rice yield was the highest with the finger sticking area of 1.83 cm2,and then decreased with the large finger sticking area.Under the plant spacing of 11.5 cm,the highest rice yields of Zhuliangyou 819 and Zhongjiaozao17 were 8 492.94 kg/hm2 and 8 000.23 kg/hm2,respectively.Therefore,the preferred machine transplanting settings for double-season early rice are a plant spacing of11.5 cm and a finger sticking area of 1.83 cm2,while the finger sticking area should be increased to 2.23 cm2 for conventional rice cultivars.
文摘In the paper, the effects of linear expansion coefficient and basic index of melting slag on the detachability of self shielded flux cored electrode (SSFCE) are investigated. An equation is obtained on the principles of ceramics and mineralography which predict the detachability of basic SSFCE. In addition, stick slag mechanism of SSFCE is analyzed.
文摘This paper makes use of the method of testing and measuring the human body tibia by using2-D moire interferometry of sticking film. hased on the J'--y direction moire patterns recorded synchronously by 2-D optical path,the elastic constant,strain and displacement of the tibia are measured.Compared with the electric measuring method the error is samll and the sensitivity is high.
文摘Objective To compare the differences of effect on infantile amblyopia treated with auricular point sticking therapy and regular comprehensive therapy of western medicine.Methods Two hundreds and thirty cases of amblyopia patients were randomly divided into two groups,namely the group of auricular point sticking therapy,which had 120 cases（212 eyes）,and the group of comprehensive therapy,which had 110 cases（194 eyes）.The seed of Semen Vaccariae was applied at the ear point such as the eye,ear Shenmen,the liver,the spleen and the kidney.Regular comprehensive therapy of western medicine included covering method,vision corrected with glasses and fine exercise.Vision improvements of the two groups were observed with a three-year follow up.Results The effective rates of the auricular point sticking therapy group and comprehensive therapy group of ametropic amblyopia were 81.0%（64/79） and 52.2%（36/69）,respectively.The effective rates of anisometropic amblyopia of the two groups were 73.1%（49/67） and 47.7%（31/65）,respectively.And the effective rates of the two groups of strabismic amblyopia were 71.2%（47/66） and 45.0%（27/60）,respectively.The therapeutic effects of auricular point sticking therapy on all kinds of amblyopia were better than those of the comprehensive therapy（all P0.05）.Conclusion The effect of auricular point sticking therapy on infantile amblyopia is better than that of regular comprehensive therapy of western medicine,which can obviously improve the vision of the patients with easy manipulations.
文摘Of 149 cases.infantile diarrhea were treated with Zhou’s multiapplied rapid-sticking herbomoxa-pen.The main acupoints selected were Auriculoapex,Tianshu(ST 25),Zusanli(ST 36),Shenshu(BL 23),etc.TWO groups were observed,32 cases from the 149 cases as therapid-sticking moxatherapy(RSMT)group who suffered from the acute diarrhea without any thera-peutics before,and the other 35 cases with western medicine as the control group.Results showedthat the recovering rate and the average therapeutic course of healing in RSMT group were higher andshorter than that in control one(P【0.05;P【0.01),even without marked difference of the total ef-fective rates between the two groups(P】0.05).Of 149 cases with RSMT,the therapeutic effect onacute ones was better than those on delayed and chronic ones(P【0.05),yet the difference was notmarked in therapeutic effects between the etiological causes of infections and non-infections(P】 0.0.5).It is therefore worthy of popularizing RSMT due to its remarked curative results without anyside-effect,simply-manipulated and well-accepted features.
基金supported by the National Key Research and Development Program of China(No.2021YFB2011300)the National Natural Science Foundation of China(No.52175067).
文摘External contamination particles or wear particles corroded by a valve body are mixed into the fluid. As a result, when the fluid enters the fitting clearance of the valve core, it can cause an increase in resistance and lead to sticking failure of the valve core. This paper analyzes solid-liquid flow characteristics in fitting clearances and valve-core sticking based on the Euler-Euler model, using a typical hydraulic valve as an example. The impact of particle concentration and diameter on flow characteristics and valve-core sticking force was analyzed. The highest volume fraction of particles was in the pressureequalizing groove(PEG), with peak values increasing as the particle diameter increased. The sticking force increased with increasing particle concentration. When the particle diameter was 12 μm, the sticking force was the largest, making this the sensitive particle diameter. Particle distribution and valve-core sticking force were compared for oval, rectangular, and triangular PEGs. The fluid-deflection angles in oval and rectangular PEGs were larger, and their values were 32.83° and 39.15°, respectively. The fluid-deflection angle in the triangular PEG was relatively small, less than 50% that of the oval or rectangular PEGs. The particle-volume-fraction peaks in oval, rectangular, and triangular PEGs were 0.0317, 0.0316, and 0.0312, respectively. The sticking forces of oval, rectangular, and triangular PEGs were 4.796, 4.802, and 4.757 N, respectively when the particle diameter was 12 μm. This work provides a reference for design and research aimed at reducing valve-core sticking.
文摘The sticking phenomenon during hot rolling of SUS 430 ferritic stainless steel was investigated by means of a two-disc type high-temperature wear tester. The test results indicate that sticking particles on the surfaces of high chromium steel （HiCr） and high-speed steel （HSS） rolls undergo nucleation, growth, and saturation stages. Grooves on the roll surface generated by grinding provide nucleation sites for sticking particles. The number of sticking particles on the HiCr roll surface is greater than that on the HSS roll surface. The average surface roughnesses （Ra） of HiCr and HSS rolls change from 0.502 and 0.493 μm at the initial stage to 0.837 and 0.530 μm at the saturation stage, respectively. The test further proves that the sticking behavior is strongly dependent on roll materials, and the HSS roll is more benefi- cial to prevent particles sticking compared with the HiCr roll under the same hot-rolling conditions.
