A hydrometallurgical process for refractory gold-bearing arsenosulfide concentrates at ambient temperature and pressure was presented, including fine grinding with intensified alkali-leaching （FGIAL）, enhanced agita...A hydrometallurgical process for refractory gold-bearing arsenosulfide concentrates at ambient temperature and pressure was presented, including fine grinding with intensified alkali-leaching （FGIAL）, enhanced agitation alkali-leaching （EAAL）, thiosulfate leaching and displacement. Experimental results on a refractory gold concentrate showed that the total consumption of NaOH in alkaline leaching is only 41% of those theoretically calculated under the conditions of full oxidization for the same amount of arse- nides and sulfides transformed into arsenates and sulfates, and 72.3% of gold is synchro-dissoluted by thiosulfate self-generated during alkaline leaching. After alkaline leaching, thiosulfate leaching was carried out for 24 h. The dissolution of gold is increased to 91.9% from 4.6% by cyanide without the pretreatment. The displacement of gold by zinc powder in the solution gets to 99.2%. Due to an amount of thiosulfate self-generated during alkaline leaching, the reagent addition in thiosulfate leaching afterwards is lower than the normal.展开更多
Herein we demonstrate crystallization-driven self-assembly ofisotactic polystyrene （iPS） with high isotacticity and narrow molecular weight distribution and crystallization-induced switching of the morphology of iPS...Herein we demonstrate crystallization-driven self-assembly ofisotactic polystyrene （iPS） with high isotacticity and narrow molecular weight distribution and crystallization-induced switching of the morphology of iPS aggregates in N, N-dimethylformamide （DMF）. The formation and morphology switching of the self-assembled aggregates of iPS are investigated by means of dynamic light scattering （DLS）, scanning electron microscopy （SEM）, differential scanning calorimetry （DSC） and wide angle X-ray diffraction （WXRD）. The results reveal that cooling DMF solution of iPS promotes iPS chains to self-assemble into spherical aggregates with a gelled core cross-linked by microcrystals, which is surrounded by solvent-swollen corona. Furthermore, crystallization induces the deformation of iPS aggregates from spherical to plate-like or nest-like.展开更多
This paper presents a cascode configuration synchronous rectifier device based on silicon MOSFET and Schottky diode,which can replace traditional power diode directly.This structure has self-driven ability with simple...This paper presents a cascode configuration synchronous rectifier device based on silicon MOSFET and Schottky diode,which can replace traditional power diode directly.This structure has self-driven ability with simple external circuit,and the conduction characteristic is preferable to a power diode.Static characterization and switching behavior analysis of proposed structure are conducted in this paper.The switching process is illustrated in detail using real model which considers the parasitic inductances and the nonlinearity of junction capacitors.The real time internal voltage and current value during switching transition are deduced with the equivalent circuit.To validate the analysis,two voltage specification rectifiers are built.Finally,double-pulse test results and the practical design example verify the performance advantages of proposed structure.展开更多
We designed and constructed a new family of 608 dendritic dipyridyl donors, from which two novel triangular metallodendrimers were successfully prepared via coordination-driven self-assembly.Inspired by the existence ...We designed and constructed a new family of 608 dendritic dipyridyl donors, from which two novel triangular metallodendrimers were successfully prepared via coordination-driven self-assembly.Inspired by the existence of multiple intermolecular interactions（e.g., p–p stacking and CH–p interactions） imposed by the DMIP-functionalized poly（benzyl ether） dendrons, their hierarchical selfassembly behaviors were studied in various mixed solvents by using scanning electron microscopy（SEM）. Interestingly, it was found that the morphologies of the obtained metallodendrimers were highly depended on the dendron generation. For example, the first-generation metallodendrimer was able to hierarchically self-assemble into the spherical nanostructures in various mixed solvents. However, the nanofibers were observed for the second-generation metallodendrimer under the similar conditions.Furthermore, the driven force for the formation of such ordered nanostructures was investigated by using1 H NMR and fluorescence spectroscopy.展开更多
The interest on the use of renewable energy resources is increasing, especially towards wind and hydro powers, which should be efficiently converted into electric energy via suitable technology tools. To this aim, sel...The interest on the use of renewable energy resources is increasing, especially towards wind and hydro powers, which should be efficiently converted into electric energy via suitable technology tools. To this aim, self-tuning control techniques represent viable strategies that can be employed for this purpose, due to the features of these nonlinear dynamic processes working over a wide range of operating conditions, driven by stochastic inputs, excitations and disturbances. Some of the considered methods were already verified on wind turbine systems, and important advantages may thus derive from the appropriate implementation of the same control schemes for hydroelectric plants. This represents the key point of the work, which provides some guidelines on the design and the application of these control strategies to these energy conversion systems. In fact, it seems that investigations related with both wind and hydraulic energies present a reduced number of common aspects, thus leading to little exchange and share of possible common points. This consideration is particularly valid with reference to the more established wind area when compared to hydroelectric systems. In this way, this work recalls the models of wind turbine and hydroelectric system, and investigates the application of different control solutions. Another important point of this investigation regards the analysis of the exploited benchmark models, their control objectives, and the development of the control solutions. The working conditions of these energy conversion systems will also be taken into account in order to highlight the reliability and robustness characteristics of the developed control strategies, especially interesting for remote and relatively inaccessible location of many installations.展开更多
基金This project was financially supported by the Natural Science Foundation of Liaoning Province of China (No.2001101015) and theFree Study Item of the Institute of Metal Research, Chinese Academy of Sciences (No.AM05-0866)
文摘A hydrometallurgical process for refractory gold-bearing arsenosulfide concentrates at ambient temperature and pressure was presented, including fine grinding with intensified alkali-leaching （FGIAL）, enhanced agitation alkali-leaching （EAAL）, thiosulfate leaching and displacement. Experimental results on a refractory gold concentrate showed that the total consumption of NaOH in alkaline leaching is only 41% of those theoretically calculated under the conditions of full oxidization for the same amount of arse- nides and sulfides transformed into arsenates and sulfates, and 72.3% of gold is synchro-dissoluted by thiosulfate self-generated during alkaline leaching. After alkaline leaching, thiosulfate leaching was carried out for 24 h. The dissolution of gold is increased to 91.9% from 4.6% by cyanide without the pretreatment. The displacement of gold by zinc powder in the solution gets to 99.2%. Due to an amount of thiosulfate self-generated during alkaline leaching, the reagent addition in thiosulfate leaching afterwards is lower than the normal.
基金financially supported by the National Natural Science Foundation of China(Nos.21174167 and 20974123)the Guangdong Province Higher School Science and Technology Innovation Key Project and the Natural Science Foundation of Guangdong Province(No.S2013030013474)
文摘Herein we demonstrate crystallization-driven self-assembly ofisotactic polystyrene （iPS） with high isotacticity and narrow molecular weight distribution and crystallization-induced switching of the morphology of iPS aggregates in N, N-dimethylformamide （DMF）. The formation and morphology switching of the self-assembled aggregates of iPS are investigated by means of dynamic light scattering （DLS）, scanning electron microscopy （SEM）, differential scanning calorimetry （DSC） and wide angle X-ray diffraction （WXRD）. The results reveal that cooling DMF solution of iPS promotes iPS chains to self-assemble into spherical aggregates with a gelled core cross-linked by microcrystals, which is surrounded by solvent-swollen corona. Furthermore, crystallization induces the deformation of iPS aggregates from spherical to plate-like or nest-like.
基金supported in part by the National Natural Science Foundation of China (No.51777093)
文摘This paper presents a cascode configuration synchronous rectifier device based on silicon MOSFET and Schottky diode,which can replace traditional power diode directly.This structure has self-driven ability with simple external circuit,and the conduction characteristic is preferable to a power diode.Static characterization and switching behavior analysis of proposed structure are conducted in this paper.The switching process is illustrated in detail using real model which considers the parasitic inductances and the nonlinearity of junction capacitors.The real time internal voltage and current value during switching transition are deduced with the equivalent circuit.To validate the analysis,two voltage specification rectifiers are built.Finally,double-pulse test results and the practical design example verify the performance advantages of proposed structure.
基金financial support of the National Natural Science Foundation of China (No. 21302058)the financial support of the Key Basic Research Project of Shanghai Science and Technology Commission (No. 13JC1402200)
文摘We designed and constructed a new family of 608 dendritic dipyridyl donors, from which two novel triangular metallodendrimers were successfully prepared via coordination-driven self-assembly.Inspired by the existence of multiple intermolecular interactions（e.g., p–p stacking and CH–p interactions） imposed by the DMIP-functionalized poly（benzyl ether） dendrons, their hierarchical selfassembly behaviors were studied in various mixed solvents by using scanning electron microscopy（SEM）. Interestingly, it was found that the morphologies of the obtained metallodendrimers were highly depended on the dendron generation. For example, the first-generation metallodendrimer was able to hierarchically self-assemble into the spherical nanostructures in various mixed solvents. However, the nanofibers were observed for the second-generation metallodendrimer under the similar conditions.Furthermore, the driven force for the formation of such ordered nanostructures was investigated by using1 H NMR and fluorescence spectroscopy.
文摘The interest on the use of renewable energy resources is increasing, especially towards wind and hydro powers, which should be efficiently converted into electric energy via suitable technology tools. To this aim, self-tuning control techniques represent viable strategies that can be employed for this purpose, due to the features of these nonlinear dynamic processes working over a wide range of operating conditions, driven by stochastic inputs, excitations and disturbances. Some of the considered methods were already verified on wind turbine systems, and important advantages may thus derive from the appropriate implementation of the same control schemes for hydroelectric plants. This represents the key point of the work, which provides some guidelines on the design and the application of these control strategies to these energy conversion systems. In fact, it seems that investigations related with both wind and hydraulic energies present a reduced number of common aspects, thus leading to little exchange and share of possible common points. This consideration is particularly valid with reference to the more established wind area when compared to hydroelectric systems. In this way, this work recalls the models of wind turbine and hydroelectric system, and investigates the application of different control solutions. Another important point of this investigation regards the analysis of the exploited benchmark models, their control objectives, and the development of the control solutions. The working conditions of these energy conversion systems will also be taken into account in order to highlight the reliability and robustness characteristics of the developed control strategies, especially interesting for remote and relatively inaccessible location of many installations.
