K–Se batteries have been identified as promising energy storage systems owing to their high energy density and cost-effectiveness.However,challenges such as substantial volume changes and low Se utilization require f...K–Se batteries have been identified as promising energy storage systems owing to their high energy density and cost-effectiveness.However,challenges such as substantial volume changes and low Se utilization require further investigation.In this study,novel N-doped multichannel carbon nanofibers(h-NMCNFs)with hierarchical porous structures were successfully synthesized as efficient cathode hosts for K–Se batteries through the carbonization of two electrospun immiscible polymer nanofibers and subsequent chemical activation.Mesopores originated from the decomposition of the polymer embedded in the carbon nanofibers,and micropores were introduced via KOH activation.During the activation step,hierarchical porous carbon nanofibers with enhanced pore volumes were formed because of the micropores in the carbon nanofibers.Owing to the mesopores that enabled easy access to the electrolyte and the high utilization of chain-like Se within the micropores,the Se-loaded hierarchical porous carbon nanofibers(60 wt%Se)exhibited a high discharge capacity and excellent rate performance.The discharge capacity of the nanofibers at the 1,000th cycle was 210.8 mA.h.g^(-1)at a current density of 0.5C.The capacity retention after the initial activation was 64%.In addition,a discharge capacity of 165 mA.h.g^(-1)was obtained at an extremely high current density of 3.0C.展开更多
Soil salinity seriously affects the utilization of farmland and threatens the crop production.Here,a selenium-nitrogen-co-doped carbon dots was developed,which increased rice seedling growth and alleviated its inhibit...Soil salinity seriously affects the utilization of farmland and threatens the crop production.Here,a selenium-nitrogen-co-doped carbon dots was developed,which increased rice seedling growth and alleviated its inhibition by salt stress by foliar spraying.The treatment activated Ca^(2+)and jasmonic acid signaling pathways and increased iron homeostasis,antioxidant defense,and cell wall development of rice seedlings.It could be used to increase crop resistance to environmental stress.展开更多
Global warming caused by the emission of CO_(2) in industrial flue gas has attractedmore and more attention.Therefore,to fix CO_(2) with high efficiency and environmentally friendly had become the hot research field.C...Global warming caused by the emission of CO_(2) in industrial flue gas has attractedmore and more attention.Therefore,to fix CO_(2) with high efficiency and environmentally friendly had become the hot research field.Compared with the traditional coal-fired power plant flue gas emission reduction technology,carbon fixation and emission reduction by microalgae is considered as a promising technology due to the advantages of simple process equipment,convenient operation and environmental protection.When the flue gas is treated by microalgae carbon fixation and emission reduction technology,microalgae cells can fix CO_(2) in the flue gas through photosynthesis,and simultaneously absorb NO_(x) and SO_(x) as nitrogen and sulfur sources required for growth.Meanwhile,they can also absorb mercury,selenium,arsenic,cadmium,lead and other heavy metal ions in the flue gas to obtain microalgae biomass.The obtained microalgae biomass can be further transformed into high valueadded products,which has broad development prospects.This paper reviews the mechanisms and pathways of CO_(2) sequestration,the mechanism and impacts of microalgal emission reduction of flue gas pollutants,and the applications of carbon sequestration in industrial flue gas by microalgae.Finally,this paper provides some guidelines and prospects for the research and application of green emission reduction technology for industrial flue gas.展开更多
Biomass-derived hard carbon is becoming promising anodes for potassium-ion batteries(PIBs)thanks to their resource abundance.Yet,it is a big challenge to improve the charge carrier kinetics of the disordered carbon la...Biomass-derived hard carbon is becoming promising anodes for potassium-ion batteries(PIBs)thanks to their resource abundance.Yet,it is a big challenge to improve the charge carrier kinetics of the disordered carbon lattice in hard carbon.Herein,confined pitch-based soft carbon in pollen-derived hard carbon(PSC/PHC)is synthesized by vapor deposition strategy as anodes for PIBs.The ordered pitch-based soft carbon compensates for the short-range electron conduction in hard carbon to enhance the charge transfer kinetics,and the externally disordered pollen-derived hard carbon alleviates the volume change of soft carbon during cycling.Benefiting from the synergistic effect of soft and hard carbon,as well as the reinforced structure of order-in-disordered carbon,the PSC/PHC obtained with deposition time of 0.5 h(PSC/PHC-0.5)displays an excellent rate capability(148.7 mAh g^(-1)at 10 A g^(-1))and superb cycling stability(70%retention over 2000 cycles at 1 A g^(-1)).This work offers a unique insight in tuning the microcrystalline structure of soft-hard carbon anode for advanced PIBs.展开更多
Pore structure engineering has been acknowledged as suitable approach to creating active sites and en-hancing ion transport capabilities of hard carbon anodes.However,conventional porous carbon materials exhibit high ...Pore structure engineering has been acknowledged as suitable approach to creating active sites and en-hancing ion transport capabilities of hard carbon anodes.However,conventional porous carbon materials exhibit high BET and surface defects.Additionally,the sodium storage mechanism predominantly occurs in the slope region.This contradicts practical application requirements because the capacity of the plateau region is crucial for determining the actual capacity of batteries.In our work,we prepared a novel“core-shell”carbon framework(CNA1200).Introducingclosedporesand carboxylgroupsinto coal-basedcarbon materials to enhance its sodium storage performance.The closed pore structure dominates in the“core”structure,which is attributed to the timely removal of sodium hydroxide(NaOH)to prevent further for-mation of active carbon structure.The presence of closed pores is beneficial for increasing sodium ion storage in the low-voltage plateau region.And the“shell”structure originates from coal tar pitch,it not only uniformly connects hard carbon particles together to improve cycling stability,but is also rich in carboxyl groups to enhance the reversible sodium storage performance in slope region.CNA1200 has ex-cellent electrochemical performance,it exhibits a specific capacity of 335.2 mAh g^(−1)at a current density of 20 mA g^(−1)with ICE=51.53%.In addition,CNA1200 has outstanding cycling stability with a capac-ity retention of 91.8%even when cycling over 200 times.When CNA1200 is used as anode paired with Na_(3)V_(2)(PO_(4))_(3)cathode,it demonstrates a capacity of 109.54 mAh g^(−1)at 0.1 C and capacity retention of 94.64%at 0.5 C.This work provides valuable methods for regulating the structure of sodium-ion battery(SIBs)anode and enhances the potential for commercialization.展开更多
China is the most important steel producer in the world,and its steel industry is one of themost carbon-intensive industries in China.Consequently,research on carbon emissions from the steel industry is crucial for Ch...China is the most important steel producer in the world,and its steel industry is one of themost carbon-intensive industries in China.Consequently,research on carbon emissions from the steel industry is crucial for China to achieve carbon neutrality and meet its sustainable global development goals.We constructed a carbon dioxide(CO_(2))emission model for China’s iron and steel industry froma life cycle perspective,conducted an empirical analysis based on data from2019,and calculated the CO_(2)emissions of the industry throughout its life cycle.Key emission reduction factors were identified using sensitivity analysis.The results demonstrated that the CO_(2)emission intensity of the steel industry was 2.33 ton CO_(2)/ton,and the production and manufacturing stages were the main sources of CO_(2)emissions,accounting for 89.84%of the total steel life-cycle emissions.Notably,fossil fuel combustion had the highest sensitivity to steel CO_(2)emissions,with a sensitivity coefficient of 0.68,reducing the amount of fossil fuel combustion by 20%and carbon emissions by 13.60%.The sensitivities of power structure optimization and scrap consumption were similar,while that of the transportation structure adjustment was the lowest,with a sensitivity coefficient of less than 0.1.Given the current strategic goals of peak carbon and carbon neutrality,it is in the best interest of the Chinese government to actively promote energy-saving and low-carbon technologies,increase the ratio of scrap steel to steelmaking,and build a new power system.展开更多
Selenium is an essential trace element for human beings and it plays a significant role for the health of human nervous system.The strong antioxidant effect of selenium endows the element with the ability to treat var...Selenium is an essential trace element for human beings and it plays a significant role for the health of human nervous system.The strong antioxidant effect of selenium endows the element with the ability to treat various diseases,including Alzheimer's disease(AD).In the body,selenium exists in the forms of selenoproteins,which could treat AD through various pathways,such as inhibiting peroxidation,inhibiting apoptosis signal pathway,reducing the levels of Aβin neurons and alleviating Tau protein caused by pathological damage.This article aims to comprehensively elaborate on the relationship between selenium and AD.展开更多
Bisphenol A(BPA)is an industrial pollutant that can cause immune impairment.Selenium acts as an antioxidant,as selenium deficiency often accompanies oxidative stress,resulting in organ damage.This study is the first t...Bisphenol A(BPA)is an industrial pollutant that can cause immune impairment.Selenium acts as an antioxidant,as selenium deficiency often accompanies oxidative stress,resulting in organ damage.This study is the first to demonstrate that BPA and/or selenium deficiency induce pyroptosis and ferroptosis-mediated thymic injury in chicken and chicken lymphoma cell(MDCC-MSB-1)via oxidative stress-induced endoplasmic reticulum(ER)stress.We established a broiler chicken model of BPA and/or selenium deficiency exposure and collected thymus samples as research subjects after 42 days.The results demonstrated that BPA or selenium deficiency led to a decrease in antioxidant enzyme activities(T-AOC,CAT,and GSH-Px),accumulation of peroxides(H2O2 and MDA),significant upregulation of ER stress-relatedmarkers(GRP78,IER 1,PERK,EIF-2α,ATF4,and CHOP),a significant increase in iron ion levels,significant upregulation of pyroptosis-related gene(NLRP3,ASC,Caspase1,GSDMD,IL-18 and IL-1β),significantly increase ferroptosis-related genes(TFRC,COX2)and downregulate GPX4,HO-1,FTH,NADPH.In vitro experiments conducted in MDCC-MSB-1 cells confirmed the results,demonstrating that the addition of antioxidant(NAC),ER stress inhibitor(TUDCA)and pyroptosis inhibitor(Vx765)alleviated oxidative stress,endoplasmic reticulum stress,pyroptosis,and ferroptosis.Overall,this study concludes that the combined effects of oxidative stress and ER stress mediate pyroptosis and ferroptosis in chicken thymus induced by BPA exposure and selenium deficiency.展开更多
Present industrial decarbonization technologies require an active CO_(2)-concentration system,often based on lime reaction or amine binding reactions,which is energy intensive and carries a high CO_(2)-footprint.Here ...Present industrial decarbonization technologies require an active CO_(2)-concentration system,often based on lime reaction or amine binding reactions,which is energy intensive and carries a high CO_(2)-footprint.Here instead,an effective process without active CO_(2)concentration is demonstrated in a new process-termed IC2CNT(Insulationdiffusion facilitated CO_(2) to Carbon Nanomaterial Technology)decarbonization process.Molten carbonates such as Li_(2)CO_(3)(mp 723℃)are highly insoluble to industrial feed gas principal components(N2,O_(2),and H2O).However,CO_(2) can readily dissolve and react in molten carbonates.We have recently characterized high CO_(2) diffusion rates through porous aluminosilicate and calcium-magnesium silicate thermal insulations.Here,the CO_(2) in ambient feed gas passes through these membranes into molten Li_(2)CO_(3).The membrane also concurrently insulates the feed gas from the hot molten carbonate chamber,obviating the need to heat the(non-CO_(2))majority of the feed gas to high temperature.In this insulation facilitated decarbonization process CO_(2)is split by electrolysis in the molten carbonate producing sequestered,high-purity carbon nanomaterials(such as CNTs)and O_(2).展开更多
S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB...S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.展开更多
Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation ac...Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation activity were studied.Several different carbon materi-als were produced from them by oxida-tion in air(350℃,300 mL/min)fol-lowed by carbonization(1000℃ in Ar),and the effect of the cross-linked structure on their structure and sodium storage properties was investigated.The results showed that the two pitch fractions were obviously different after the air oxidation.The TS fraction with a low degree of condensation and abundant side chains had a stronger oxidation activity and thus introduced more cross-linked oxygen-containing functional groups C(O)―O which prevented carbon layer rearrangement during the carbonization.As a result,a disordered hard carbon with more defects was formed,which improved the electrochemical performance.Therefore,the carbon materials derived from TS(O-TS-1000)had an obvious disordered structure and a larger layer spacing,giving them better sodium storage perform-ance than those derived from the TI-PS fraction(O-TI-PS-1000).The specific capacity of O-TS-1000 was about 250 mAh/g at 20 mA/g,which was 1.67 times higher than that of O-TI-PS-1000(150 mAh/g).展开更多
The design of cost-effective and efficient metal-free carbon-based catalysts for the hydrogen evolution reaction(HER)is of great significance for increasing the production of clean hydrogen by the electrolysis of alka...The design of cost-effective and efficient metal-free carbon-based catalysts for the hydrogen evolution reaction(HER)is of great significance for increasing the production of clean hydrogen by the electrolysis of alkaline water.Precise control of the electronic structure by heteroatom doping has proven to be efficient for increasing catalytic activity.Nevertheless,both the structural characteristics and the underlying mechanism are not well understood,especially for doping with two different atoms,thus limiting the use of these catalysts.We report the production of phosphorus and nitrogen co-doped hollow carbon nanospheres(HCNs)by the copolymerization of pyrrole and aniline at a Triton X-100 micelle-interface,followed by doping with phytic acid and carbonization.The unique pore structure and defect-rich framework of the HCNs expose numerous active sites.Crucially,the combined effect of graphitic nitrogen and phosphorus-carbon bonds modulate the local electronic structure of adjacent C atoms and facilitates electron transfer.As a res-ult,the HCN carbonized at 1100°C exhibited superior HER activity and an outstanding stability(70 h at a current density of 10 mA cm^(−2))in alkaline water,because of the large number of graphitic nitrogen and phosphorus-carbon bonds.展开更多
This study explores the potential of Michelia champaca wood as a sustainable and locally available precursor for the fabrication of high-performance supercapacitor electrodes.Activated carbons were synthesized through...This study explores the potential of Michelia champaca wood as a sustainable and locally available precursor for the fabrication of high-performance supercapacitor electrodes.Activated carbons were synthesized through single-step carbonization at 400℃ and 500℃(SSC-400℃ and SSC-500℃) and double-step carbonization at 400℃(DSC-400℃),with all samples activated using H_(3)PO_(4).The effects of carbonization stratergy on the structural,morphological,and electrochemical characteristics of the resulting carbon materials were systematically evaluated,using techniques such as BET,SEM,TEM,XRD,Raman scattering,FTIR,CV,GCD and EIS.Among the samples,SSC-400℃ exhibited the best electrochemical performance,achieving a specific capacitance of 292.2 Fg^(-1),an energy density of 6.4 Wh kg^(-1),and a power density of 198.4 W kg^(-1).This superior performance is attributed to its optimized pore structure,improved sur-face functionality and enhanced conductivity.SSC-500℃showed marginally lower performance,whereas,DSC-400℃ displayed the least favorable results,indicating that double-step carbonization process may negatively affect material quality by disrupting the pore network.This work highlights a strong correlation between synthesis methodology and electrochemical efficiency,directly reinforcing the importance of process optimization in electrode material develop-ment.The findings contribute to the broader goal of developing cost-effective,renewable and environmentally friendly energy storage systems.By valorizing biomass waste,the study supports global movements toward green energy technologies and circular carbon economies,offering a viable pathway for sustainable supercapacitor development and practical applications in energy storage devices.展开更多
This study analyzes the potential impact of EU carbon border regulation mechanism(CBAM)on the export of China’s carbon-intensive products.First,we summarized the main content of the CBAM.Next,based on the input-outpu...This study analyzes the potential impact of EU carbon border regulation mechanism(CBAM)on the export of China’s carbon-intensive products.First,we summarized the main content of the CBAM.Next,based on the input-output theory,this study proposes a calculation model for the implicit carbon emissions and indirect carbon emissions from electricity consumption in export products and presents the corresponding calculation results.Based on the scenario analysis method,six carbon tariffscenarios were designed to evaluate the impact of the CBAM on the major export sectors under each scenario.The results showed that in 2021,the implicit carbon emissions in all products exported to Europe from China were approximately 375 million tons,of which the indirect carbon emissions from electricity were approximately 41.8 million tons,accounting for more than 10%.According to the current levy plan,China is expected to be subject to carbon tariffs of approximately USD 1.4 billion,accounting for 0.3%of its total export value to Europe in 2021.Finally,to reduce the adverse effects of CBAM,four measures were proposed from the perspective of the power industry.展开更多
At the beginning of 2025,China’s national carbon market carbon price trend exhibited a continuous unilateral downward trajectory,representing a departure from the overall steady upward trend in carbon prices since th...At the beginning of 2025,China’s national carbon market carbon price trend exhibited a continuous unilateral downward trajectory,representing a departure from the overall steady upward trend in carbon prices since the carbon market launched in 2021.The analysis suggests that the primary reason for the recent decline in carbon prices is the reversal of supply and demand dynamics in the carbon market,with increased quota supply amid a sluggish economy.It is expected that downward pressure on carbon prices will persist in the short term,but with more industries being included and continued policy optimization and improvement,a rise in China’s medium-to long-term carbon prices is highly probable.Recommendations for enterprises involved in carbon asset operations and management:first,refining carbon asset reserves and trading strategies;second,accelerating internal CCER project development;third,exploring carbon financial instrument applications;fourth,establishing and improving internal carbon pricing mechanisms;fifth,proactively planning for new industry inclusion.展开更多
With the rapid economic development and continuous expansion of human activities,forest degradation—characterized by reduced forest stock within the forest including declining carbon storage—poses significant threat...With the rapid economic development and continuous expansion of human activities,forest degradation—characterized by reduced forest stock within the forest including declining carbon storage—poses significant threats to ecosystem stability.Understanding the current status of forest degradation and assessing potential carbon stocks in China are of strategic importance for making forest restoration efforts and enhancing carbon sequestration capacity.In this study,we used the national forest inventory data from 2009 to 2018 to develop a set of standard measures for assessing degraded forests across China,based on five key indicators:forest accumulation growth rate(FAGR),forest recruitment rate(FRR),tree species reduction rate(TSRR),forest canopy cover reduction rate(FCCRR),and forest disaster level(FDL).Additionally,we estimated standing carbon stock,potential carbon stock,and theoretical space to grow by developing a stand growth model,which accounts for stand density across different site classes,to evaluate the restoration potential of degraded forests.The results indicate that degraded forest area in China is 36.15 million hectares,accounting for 20.10% of a total forest area.Standing carbon stock and potential carbon stock of degraded forests in China are 23.93 million tons and 61.90 million tons,respectively.Overall,degraded forest varies significantly across different regions.The results highlight the important trade-offs among environmental factors,policy decisions,and forest conditions,providing a robust foundation for developing measures to enhance forest quality.展开更多
基金financially supported by the Materials/Parts Technology Development Program(No.RS-202400456324)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)by the National Research Foundation(NRF)of Korea grant(No.RS-2024-00454367)funded by the Ministry of Science and ICT(MSIT,Korea)。
文摘K–Se batteries have been identified as promising energy storage systems owing to their high energy density and cost-effectiveness.However,challenges such as substantial volume changes and low Se utilization require further investigation.In this study,novel N-doped multichannel carbon nanofibers(h-NMCNFs)with hierarchical porous structures were successfully synthesized as efficient cathode hosts for K–Se batteries through the carbonization of two electrospun immiscible polymer nanofibers and subsequent chemical activation.Mesopores originated from the decomposition of the polymer embedded in the carbon nanofibers,and micropores were introduced via KOH activation.During the activation step,hierarchical porous carbon nanofibers with enhanced pore volumes were formed because of the micropores in the carbon nanofibers.Owing to the mesopores that enabled easy access to the electrolyte and the high utilization of chain-like Se within the micropores,the Se-loaded hierarchical porous carbon nanofibers(60 wt%Se)exhibited a high discharge capacity and excellent rate performance.The discharge capacity of the nanofibers at the 1,000th cycle was 210.8 mA.h.g^(-1)at a current density of 0.5C.The capacity retention after the initial activation was 64%.In addition,a discharge capacity of 165 mA.h.g^(-1)was obtained at an extremely high current density of 3.0C.
基金financially supported by the National Natural Science Foundation of China (42207032,52070064)the Key Project of National Natural Science Foundation of China (42330705)+2 种基金Key R&D Project of Hebei Province (21373601D)Advanced Talents Incubation Program of the Hebei University (521100222012)economic support from Collaborative Innovation Center for Baiyangdian Basin Ecological Protection and Beijing-Tianjin-Hebei Sustainable Development and Institute of Life Sciences and Green Development of Hebei University。
文摘Soil salinity seriously affects the utilization of farmland and threatens the crop production.Here,a selenium-nitrogen-co-doped carbon dots was developed,which increased rice seedling growth and alleviated its inhibition by salt stress by foliar spraying.The treatment activated Ca^(2+)and jasmonic acid signaling pathways and increased iron homeostasis,antioxidant defense,and cell wall development of rice seedlings.It could be used to increase crop resistance to environmental stress.
基金supported by the National Key R&D Program of China(No.2023YFC3709500).
文摘Global warming caused by the emission of CO_(2) in industrial flue gas has attractedmore and more attention.Therefore,to fix CO_(2) with high efficiency and environmentally friendly had become the hot research field.Compared with the traditional coal-fired power plant flue gas emission reduction technology,carbon fixation and emission reduction by microalgae is considered as a promising technology due to the advantages of simple process equipment,convenient operation and environmental protection.When the flue gas is treated by microalgae carbon fixation and emission reduction technology,microalgae cells can fix CO_(2) in the flue gas through photosynthesis,and simultaneously absorb NO_(x) and SO_(x) as nitrogen and sulfur sources required for growth.Meanwhile,they can also absorb mercury,selenium,arsenic,cadmium,lead and other heavy metal ions in the flue gas to obtain microalgae biomass.The obtained microalgae biomass can be further transformed into high valueadded products,which has broad development prospects.This paper reviews the mechanisms and pathways of CO_(2) sequestration,the mechanism and impacts of microalgal emission reduction of flue gas pollutants,and the applications of carbon sequestration in industrial flue gas by microalgae.Finally,this paper provides some guidelines and prospects for the research and application of green emission reduction technology for industrial flue gas.
基金partly supported by the National Natural Science Foundation of China(52072002,52372037,and 22108003)the Postdoctoral Fellowship Program of CPSF(GZC20230015)+2 种基金the Outstanding Scientific Research and Innovation Team Program of Higher Education Institutions of Anhui Province(2023AH010015)the Excellent Young Talents Fund Program of Higher Education Institutions of Anhui Province(2023AH030026)financial support from the Anhui International Research Center of Energy Materials Green Manufacturing and Biotechnology。
文摘Biomass-derived hard carbon is becoming promising anodes for potassium-ion batteries(PIBs)thanks to their resource abundance.Yet,it is a big challenge to improve the charge carrier kinetics of the disordered carbon lattice in hard carbon.Herein,confined pitch-based soft carbon in pollen-derived hard carbon(PSC/PHC)is synthesized by vapor deposition strategy as anodes for PIBs.The ordered pitch-based soft carbon compensates for the short-range electron conduction in hard carbon to enhance the charge transfer kinetics,and the externally disordered pollen-derived hard carbon alleviates the volume change of soft carbon during cycling.Benefiting from the synergistic effect of soft and hard carbon,as well as the reinforced structure of order-in-disordered carbon,the PSC/PHC obtained with deposition time of 0.5 h(PSC/PHC-0.5)displays an excellent rate capability(148.7 mAh g^(-1)at 10 A g^(-1))and superb cycling stability(70%retention over 2000 cycles at 1 A g^(-1)).This work offers a unique insight in tuning the microcrystalline structure of soft-hard carbon anode for advanced PIBs.
基金the National Natural Science Foundation of China(No.21978164,22078189 and 22105120)the Outstanding Youth Science Fund of Shaanxi Province(No.2021JC-046)and the Special Support Program for high level talents of Shaanxi Province+3 种基金the Innovation Support Program of Shaanxi Province(2021JZY-001)the Key Research and Development Program of Shaanxi Province(No.2020GY-243)the Special Research Fund of Education Department of Shaanxi(No.20JK0535)the National High-end Foreign Expert Project(No.GDW20186100428).
文摘Pore structure engineering has been acknowledged as suitable approach to creating active sites and en-hancing ion transport capabilities of hard carbon anodes.However,conventional porous carbon materials exhibit high BET and surface defects.Additionally,the sodium storage mechanism predominantly occurs in the slope region.This contradicts practical application requirements because the capacity of the plateau region is crucial for determining the actual capacity of batteries.In our work,we prepared a novel“core-shell”carbon framework(CNA1200).Introducingclosedporesand carboxylgroupsinto coal-basedcarbon materials to enhance its sodium storage performance.The closed pore structure dominates in the“core”structure,which is attributed to the timely removal of sodium hydroxide(NaOH)to prevent further for-mation of active carbon structure.The presence of closed pores is beneficial for increasing sodium ion storage in the low-voltage plateau region.And the“shell”structure originates from coal tar pitch,it not only uniformly connects hard carbon particles together to improve cycling stability,but is also rich in carboxyl groups to enhance the reversible sodium storage performance in slope region.CNA1200 has ex-cellent electrochemical performance,it exhibits a specific capacity of 335.2 mAh g^(−1)at a current density of 20 mA g^(−1)with ICE=51.53%.In addition,CNA1200 has outstanding cycling stability with a capac-ity retention of 91.8%even when cycling over 200 times.When CNA1200 is used as anode paired with Na_(3)V_(2)(PO_(4))_(3)cathode,it demonstrates a capacity of 109.54 mAh g^(−1)at 0.1 C and capacity retention of 94.64%at 0.5 C.This work provides valuable methods for regulating the structure of sodium-ion battery(SIBs)anode and enhances the potential for commercialization.
基金supported by Ningbo’s major scientific and technological breakthrough project“Research and Demonstration on the Technology of Collaborative Disposal of Secondary Ash in Typical Industrial Furnaces” (No.20212ZDYF020047)the central balance fund project“Research on Carbon Emission Accounting and Emission Reduction Potential Assessment for the Whole Life Cycle of Iron and Steel Industry” (No.2021-JY-07).
文摘China is the most important steel producer in the world,and its steel industry is one of themost carbon-intensive industries in China.Consequently,research on carbon emissions from the steel industry is crucial for China to achieve carbon neutrality and meet its sustainable global development goals.We constructed a carbon dioxide(CO_(2))emission model for China’s iron and steel industry froma life cycle perspective,conducted an empirical analysis based on data from2019,and calculated the CO_(2)emissions of the industry throughout its life cycle.Key emission reduction factors were identified using sensitivity analysis.The results demonstrated that the CO_(2)emission intensity of the steel industry was 2.33 ton CO_(2)/ton,and the production and manufacturing stages were the main sources of CO_(2)emissions,accounting for 89.84%of the total steel life-cycle emissions.Notably,fossil fuel combustion had the highest sensitivity to steel CO_(2)emissions,with a sensitivity coefficient of 0.68,reducing the amount of fossil fuel combustion by 20%and carbon emissions by 13.60%.The sensitivities of power structure optimization and scrap consumption were similar,while that of the transportation structure adjustment was the lowest,with a sensitivity coefficient of less than 0.1.Given the current strategic goals of peak carbon and carbon neutrality,it is in the best interest of the Chinese government to actively promote energy-saving and low-carbon technologies,increase the ratio of scrap steel to steelmaking,and build a new power system.
基金the Yangzhou City and Yangzhou University Cooperation Program(No.YZ2023209)the Sele Valley Scholars Basic Research Project(No.2301)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)for support。
文摘Selenium is an essential trace element for human beings and it plays a significant role for the health of human nervous system.The strong antioxidant effect of selenium endows the element with the ability to treat various diseases,including Alzheimer's disease(AD).In the body,selenium exists in the forms of selenoproteins,which could treat AD through various pathways,such as inhibiting peroxidation,inhibiting apoptosis signal pathway,reducing the levels of Aβin neurons and alleviating Tau protein caused by pathological damage.This article aims to comprehensively elaborate on the relationship between selenium and AD.
基金supported by the National Natural Science Foundation of China Regional Joint Innovation Fund (No.U22A20524)the Heilongjiang Province Natural Science Foundation Key projects (No.ZD2023C002).
文摘Bisphenol A(BPA)is an industrial pollutant that can cause immune impairment.Selenium acts as an antioxidant,as selenium deficiency often accompanies oxidative stress,resulting in organ damage.This study is the first to demonstrate that BPA and/or selenium deficiency induce pyroptosis and ferroptosis-mediated thymic injury in chicken and chicken lymphoma cell(MDCC-MSB-1)via oxidative stress-induced endoplasmic reticulum(ER)stress.We established a broiler chicken model of BPA and/or selenium deficiency exposure and collected thymus samples as research subjects after 42 days.The results demonstrated that BPA or selenium deficiency led to a decrease in antioxidant enzyme activities(T-AOC,CAT,and GSH-Px),accumulation of peroxides(H2O2 and MDA),significant upregulation of ER stress-relatedmarkers(GRP78,IER 1,PERK,EIF-2α,ATF4,and CHOP),a significant increase in iron ion levels,significant upregulation of pyroptosis-related gene(NLRP3,ASC,Caspase1,GSDMD,IL-18 and IL-1β),significantly increase ferroptosis-related genes(TFRC,COX2)and downregulate GPX4,HO-1,FTH,NADPH.In vitro experiments conducted in MDCC-MSB-1 cells confirmed the results,demonstrating that the addition of antioxidant(NAC),ER stress inhibitor(TUDCA)and pyroptosis inhibitor(Vx765)alleviated oxidative stress,endoplasmic reticulum stress,pyroptosis,and ferroptosis.Overall,this study concludes that the combined effects of oxidative stress and ER stress mediate pyroptosis and ferroptosis in chicken thymus induced by BPA exposure and selenium deficiency.
文摘Present industrial decarbonization technologies require an active CO_(2)-concentration system,often based on lime reaction or amine binding reactions,which is energy intensive and carries a high CO_(2)-footprint.Here instead,an effective process without active CO_(2)concentration is demonstrated in a new process-termed IC2CNT(Insulationdiffusion facilitated CO_(2) to Carbon Nanomaterial Technology)decarbonization process.Molten carbonates such as Li_(2)CO_(3)(mp 723℃)are highly insoluble to industrial feed gas principal components(N2,O_(2),and H2O).However,CO_(2) can readily dissolve and react in molten carbonates.We have recently characterized high CO_(2) diffusion rates through porous aluminosilicate and calcium-magnesium silicate thermal insulations.Here,the CO_(2) in ambient feed gas passes through these membranes into molten Li_(2)CO_(3).The membrane also concurrently insulates the feed gas from the hot molten carbonate chamber,obviating the need to heat the(non-CO_(2))majority of the feed gas to high temperature.In this insulation facilitated decarbonization process CO_(2)is split by electrolysis in the molten carbonate producing sequestered,high-purity carbon nanomaterials(such as CNTs)and O_(2).
基金financially supported by the National Natural Science Foundation of China(Nos.51602018 and 51902018)the Natural Science Foundation of Beijing Municipality(No.2154052)+3 种基金the China Postdoctoral Science Foundation(No.2014M560044)the Fundamental Research Funds for the Central Universities(No.FRF-MP-20-22)USTB Research Center for International People-to-people Exchange in Science,Technology and Civilization(No.2022KFYB007)Education and Teaching Reform Foundation at University of Science and Technology Beijing(Nos.2023JGC027,KC2022QYW06,and KC2022TS09)。
文摘S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)degradation.The effects of two different mixing routes were identified on the MB degradation performance.Particularly,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with Co-S.Furthermore,the degradation parameters,including pH and MOF-AEP dosage,were investigated.Finally,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.
文摘Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation activity were studied.Several different carbon materi-als were produced from them by oxida-tion in air(350℃,300 mL/min)fol-lowed by carbonization(1000℃ in Ar),and the effect of the cross-linked structure on their structure and sodium storage properties was investigated.The results showed that the two pitch fractions were obviously different after the air oxidation.The TS fraction with a low degree of condensation and abundant side chains had a stronger oxidation activity and thus introduced more cross-linked oxygen-containing functional groups C(O)―O which prevented carbon layer rearrangement during the carbonization.As a result,a disordered hard carbon with more defects was formed,which improved the electrochemical performance.Therefore,the carbon materials derived from TS(O-TS-1000)had an obvious disordered structure and a larger layer spacing,giving them better sodium storage perform-ance than those derived from the TI-PS fraction(O-TI-PS-1000).The specific capacity of O-TS-1000 was about 250 mAh/g at 20 mA/g,which was 1.67 times higher than that of O-TI-PS-1000(150 mAh/g).
基金financially supported by the project of the National Natural Science Foundation of China(52322203)the Key Research and Development Program of Shaanxi Province(2024GHZDXM-21)。
文摘The design of cost-effective and efficient metal-free carbon-based catalysts for the hydrogen evolution reaction(HER)is of great significance for increasing the production of clean hydrogen by the electrolysis of alkaline water.Precise control of the electronic structure by heteroatom doping has proven to be efficient for increasing catalytic activity.Nevertheless,both the structural characteristics and the underlying mechanism are not well understood,especially for doping with two different atoms,thus limiting the use of these catalysts.We report the production of phosphorus and nitrogen co-doped hollow carbon nanospheres(HCNs)by the copolymerization of pyrrole and aniline at a Triton X-100 micelle-interface,followed by doping with phytic acid and carbonization.The unique pore structure and defect-rich framework of the HCNs expose numerous active sites.Crucially,the combined effect of graphitic nitrogen and phosphorus-carbon bonds modulate the local electronic structure of adjacent C atoms and facilitates electron transfer.As a res-ult,the HCN carbonized at 1100°C exhibited superior HER activity and an outstanding stability(70 h at a current density of 10 mA cm^(−2))in alkaline water,because of the large number of graphitic nitrogen and phosphorus-carbon bonds.
文摘This study explores the potential of Michelia champaca wood as a sustainable and locally available precursor for the fabrication of high-performance supercapacitor electrodes.Activated carbons were synthesized through single-step carbonization at 400℃ and 500℃(SSC-400℃ and SSC-500℃) and double-step carbonization at 400℃(DSC-400℃),with all samples activated using H_(3)PO_(4).The effects of carbonization stratergy on the structural,morphological,and electrochemical characteristics of the resulting carbon materials were systematically evaluated,using techniques such as BET,SEM,TEM,XRD,Raman scattering,FTIR,CV,GCD and EIS.Among the samples,SSC-400℃ exhibited the best electrochemical performance,achieving a specific capacitance of 292.2 Fg^(-1),an energy density of 6.4 Wh kg^(-1),and a power density of 198.4 W kg^(-1).This superior performance is attributed to its optimized pore structure,improved sur-face functionality and enhanced conductivity.SSC-500℃showed marginally lower performance,whereas,DSC-400℃ displayed the least favorable results,indicating that double-step carbonization process may negatively affect material quality by disrupting the pore network.This work highlights a strong correlation between synthesis methodology and electrochemical efficiency,directly reinforcing the importance of process optimization in electrode material develop-ment.The findings contribute to the broader goal of developing cost-effective,renewable and environmentally friendly energy storage systems.By valorizing biomass waste,the study supports global movements toward green energy technologies and circular carbon economies,offering a viable pathway for sustainable supercapacitor development and practical applications in energy storage devices.
文摘This study analyzes the potential impact of EU carbon border regulation mechanism(CBAM)on the export of China’s carbon-intensive products.First,we summarized the main content of the CBAM.Next,based on the input-output theory,this study proposes a calculation model for the implicit carbon emissions and indirect carbon emissions from electricity consumption in export products and presents the corresponding calculation results.Based on the scenario analysis method,six carbon tariffscenarios were designed to evaluate the impact of the CBAM on the major export sectors under each scenario.The results showed that in 2021,the implicit carbon emissions in all products exported to Europe from China were approximately 375 million tons,of which the indirect carbon emissions from electricity were approximately 41.8 million tons,accounting for more than 10%.According to the current levy plan,China is expected to be subject to carbon tariffs of approximately USD 1.4 billion,accounting for 0.3%of its total export value to Europe in 2021.Finally,to reduce the adverse effects of CBAM,four measures were proposed from the perspective of the power industry.
文摘At the beginning of 2025,China’s national carbon market carbon price trend exhibited a continuous unilateral downward trajectory,representing a departure from the overall steady upward trend in carbon prices since the carbon market launched in 2021.The analysis suggests that the primary reason for the recent decline in carbon prices is the reversal of supply and demand dynamics in the carbon market,with increased quota supply amid a sluggish economy.It is expected that downward pressure on carbon prices will persist in the short term,but with more industries being included and continued policy optimization and improvement,a rise in China’s medium-to long-term carbon prices is highly probable.Recommendations for enterprises involved in carbon asset operations and management:first,refining carbon asset reserves and trading strategies;second,accelerating internal CCER project development;third,exploring carbon financial instrument applications;fourth,establishing and improving internal carbon pricing mechanisms;fifth,proactively planning for new industry inclusion.
基金supported by National Key Research and Development Program of China(No.2021YFD2200405(S.R.L.))Natural Science Foundation of China(Grant No.31971653).
文摘With the rapid economic development and continuous expansion of human activities,forest degradation—characterized by reduced forest stock within the forest including declining carbon storage—poses significant threats to ecosystem stability.Understanding the current status of forest degradation and assessing potential carbon stocks in China are of strategic importance for making forest restoration efforts and enhancing carbon sequestration capacity.In this study,we used the national forest inventory data from 2009 to 2018 to develop a set of standard measures for assessing degraded forests across China,based on five key indicators:forest accumulation growth rate(FAGR),forest recruitment rate(FRR),tree species reduction rate(TSRR),forest canopy cover reduction rate(FCCRR),and forest disaster level(FDL).Additionally,we estimated standing carbon stock,potential carbon stock,and theoretical space to grow by developing a stand growth model,which accounts for stand density across different site classes,to evaluate the restoration potential of degraded forests.The results indicate that degraded forest area in China is 36.15 million hectares,accounting for 20.10% of a total forest area.Standing carbon stock and potential carbon stock of degraded forests in China are 23.93 million tons and 61.90 million tons,respectively.Overall,degraded forest varies significantly across different regions.The results highlight the important trade-offs among environmental factors,policy decisions,and forest conditions,providing a robust foundation for developing measures to enhance forest quality.
