The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerge...The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerged entry nozzles,form floaters in the molds,and produce various surface defects on the cast slabs.This review summarizes the effects of nonmetallic inclusions on traditional CaO-SiO_(2)-based(CS)mold fluxes and novel CaO-Al_(2)O_(3)-based(CA)low-or non-reactive fluxes containing TiO_(2),BaO,and B_(2)O_(3)additives to avoid undesirable steel,slag,and inclusion reactions,with the aim of providing a new perspective for research and practice related to balancing the lubrication and heat transfer of mold fluxes to promote smooth operation and reduce surface defects on cast slabs.For traditional CS mold flux,although the addition of solvents such as Na_(2)O,Li_(2)O,and B_(2)O_(3)can enhance flowability,steel-slag reactions persist,limiting the effectiveness of CS mold fluxes in high-Ti steel casting.Low-or non-reactive CA mold fluxes with reduced SiO_(2)content are a research focus,where adding other components can significantly change flux characteristics.Replacing CaO with BaO can lower the melting point and inhibit crystallization,allowing the flux to maintain good flowability at low temperatures.Replacing SiO_(2)with TiO_(2)can stabilize the viscosity and enhance heat transfer.To reduce the environmental impact,fluorides are replaced with components such as TiO_(2),B_(2)O_(3),BaO,Li_(2)O,and Na_(2)O for F-frce mold fluxes with similar lubrication,crystallization,and heat-transfer effects.When TiO_(2)replaces CaF_(2),it stabilizes the viscosity and enhances the heat conductivity,forming CaTiO_(3)and CaSiTiO_(5)phases instead of cuspidine to control crystallization.B_(2)O_(3)lowers the melting point and suppresses crystallization,forming phases such as Ca_(3)B_(2)O_(6)and Ca_(11)Si_(4)B_(2)O_(22).BaO introduces non-bridging oxygen to reduce viscosity and ensure flux flowability at low temperatures.However,further studies are required to determine the optimal mold flux compositions corresponding to the steel grades and the interactions between the various components of the mold flux.In the future,the practical application of new mold fluxes for high-Ti steel will become the focus of further verification to achieve a balance between lubrication and heat transfer,which is expected to minimize the occurrence of casting problems and slab defects.展开更多
Three copper(Ⅱ),nickel and cadmium(Ⅱ)complexes,namely[Cu_(2)(μ-H2dbda)2(phen)2]·2H_(2)O(1),[Ni(μ-H2dbda)(μ-bpb)(H_(2)O)2]n(2),and[Cd(μ-H2dbda)(μ-bpa)]n(3),have been constructed hydrothermally using H4dbda(...Three copper(Ⅱ),nickel and cadmium(Ⅱ)complexes,namely[Cu_(2)(μ-H2dbda)2(phen)2]·2H_(2)O(1),[Ni(μ-H2dbda)(μ-bpb)(H_(2)O)2]n(2),and[Cd(μ-H2dbda)(μ-bpa)]n(3),have been constructed hydrothermally using H4dbda(4,4'-dihydroxy-[1,1'-biphenyl]-3,3'-dicarboxylic acid),phen(1,10-phenanthroline),bpb(1,4-bis(pyrid-4-yl)benzene),bpa(bis(4-pyridyl)amine),and copper,nickel and cadmium chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and singlecrystal X-ray diffraction analyses.Single-crystal X-ray diffraction analyses revealed that three complexes crystallize in the monoclinic P21/n,tetragonal I42d,and orthorhombic P21212 space groups.The complexes exhibit molecular dimers(1)or 2D metal-organic networks(2 and 3).The catalytic performances in the Knoevenagel reaction of these complexes were investigated.Complex 1 exhibits an effective catalytic activity and excellent reusability as a heterogeneous catalyst in the Knoevenagel reaction at room temperature.CCDC:2463800,1;2463801,2;2463802,3.展开更多
Three zinc(Ⅱ),nickel(Ⅱ),and cadmium(Ⅱ)complexes,namely[Zn(μ-Htpta)(py)_(2)]n(1),[Ni(H_(2)biim)2(H_(2)O)2][Ni(tpta)(H_(2)biim)2(H_(2)O)]2·3H_(2)O(2),and[Cd_(3)(μ4-tpta)2(μ-dpe)_(3)]_(n)(3),have been construc...Three zinc(Ⅱ),nickel(Ⅱ),and cadmium(Ⅱ)complexes,namely[Zn(μ-Htpta)(py)_(2)]n(1),[Ni(H_(2)biim)2(H_(2)O)2][Ni(tpta)(H_(2)biim)2(H_(2)O)]2·3H_(2)O(2),and[Cd_(3)(μ4-tpta)2(μ-dpe)_(3)]_(n)(3),have been constructed hydrothermally at 160℃ using H_(3)tpta([1,1':3',1″-terphenyl]-4,4',5'-tricarboxylic acid),py(pyridine),H_(2)biim(2,2'-biimidazole),dpe(1,2-di(4-pyridyl)ethylene),and zinc,nickel and cadmium chlorides,resulting in the formation of stable crystalline solids which were subsequently analyzed using infrared spectroscopy,element analysis,thermogravimetric analysis,as well as structural analyses conducted via single-crystal X-ray diffraction.The findings from these single-crystal Xray diffraction studies indicate that complexes 1-3 form crystals within the monoclinic system P2_(1)/c space group(1)or triclinic system P1 space group(2 and 3),and possess 1D,0D,and 3D structures,respectively.Complex 1 demonstrated substantial catalytic efficiency and excellent reusability as a heterogeneous catalyst in the reaction of Knoevenagel condensation under ambient temperature conditions.In addition,complex 1 also showcased notable anti-wear performance when used in polyalphaolefin synthetic lubricants.CCDC:2449810,1;2449811,2;2449812,3.展开更多
A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and...A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and Mo2S3 nanoparticles were integrated at the edges of Co3O4 nanosheets,creating a rich,heterogeneous interface that enhances the synergistic effects of each component.In an alkaline electrolyte,the synthesized CoMoNiO-S/NF-110 exhibited superior electrocatalytic performance for oxygen evolution reaction(OER),achieving current densities of 100 and 200 mA·cm^(-2) with low overpotentials of 199.4 and 224.4 mV,respectively,outperforming RuO2 and several high-performance Mo and Ni-based catalysts.This excellent performance is attributed to the rich interface formed between the components and active sites exposed by the defect structure.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecul...The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecules and{[Co2(BINDI)(DMA)_(2)]·DMA}_(n)(Co-MOF,H4BINDI=N,N'-bis(5-isophthalic acid)naphthalenediimide,DMA=N,N-dimethylacetamide)was synthesized via a one-pot method,leveragingπ-πinteractions between pyrene and Co-MOF to modulate electrical conductivity.Results demonstrate that the Py@Co-MOF catalyst exhibited significantly enhanced OER performance compared to pure Co-MOF or pyrene-based electrodes,achieving an overpotential of 246 mV at a current density of 10 mA·cm^(-2) along with excellent stability.Density functional theory(DFT)calculations reveal that the formation of O*in the second step is the rate-determining step(RDS)during the OER process on Co-MOF,with an energy barrier of 0.85 eV due to the weak adsorption affinity of the OH*intermediate for Co sites.CCDC:2419276.展开更多
Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon...Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.展开更多
CO_(2)reduction technology can promote the resource utilization of carbon and help alleviate global warming and energy supply pressure.It is an effective way to achieve energy conversion and utilization.Covalent organ...CO_(2)reduction technology can promote the resource utilization of carbon and help alleviate global warming and energy supply pressure.It is an effective way to achieve energy conversion and utilization.Covalent organic frameworks(COFs)are porous crystalline materials formed by connecting organic monomers through covalent bonds.They have the characteristics of functional diversity and rich chemical properties.Their advantages,such as high porosity,a wide range of visible light absorption,and excellent charge separation efficiency,give them good potential in CO_(2)capture,separation,and conversion.Currently,Cu is a key metal in the catalytic CO_(2)reduction reaction(CO_(2)RR)for the preparation of high-value-added chemicals.The preparation of highly stable and large-pore Cu-based COFs using COFs as an ideal sacrificial template for loading Cu can be used to develop high-performance electrocatalysts and photocatalysts.In this review,we discuss the latest advancements in this field,including the development of various Cu-based COFs and their applications as catalysts for CO_(2)RR.Here,we mainly introduce the synthesis strategies,some important characterization information,and the applications of electrocatalytic and photocatalytic CO_(2)conversion using these previously reported Cu-based COFs.展开更多
The catalytic transferred of small molecules into high-value chemical products in green methods are highly perused,and has obtained huge attention.In this field,great progress has been achieved during the past five ye...The catalytic transferred of small molecules into high-value chemical products in green methods are highly perused,and has obtained huge attention.In this field,great progress has been achieved during the past five years.Followed by the roadmap(Chinese Chemical Letters,2019,30,2089-2109)written by us before five years,we think that it should be updated to give more insights in this field.Thus,we write the present roadmap based on the fast changed background.In this roadmap,oxygen and carbon dioxide reduction reactions(including at high temperature),photocatalytic hydrogen generation and carbon dioxide reduction reactions,(photo)electrocatalytic reduction of O_(2)to H_(2)O_(2)and NH_(3)generated from N_(2) are discussed.The progress and challenges in above catalytic processes are given.We believe this manuscript will give the researchers more suggestions and help them to obtain useful information in this field.展开更多
Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxi...Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxidation reaction(GOR);however,glycerol inevitably dissociates and converts to carbon dioxide on the Pd surface,which results in its low total Faradaic efficiency(FE)for high-value-added products.Herein,a series of Pd/C and Pd10Bix/C catalysts were synthesized to investigate the GOR pathway.The Pd10Bi3/C catalyst with optimal Bi content achieved an excellent GOR mass activity of 7.5±0.2 A mgPd−1 and an outstanding total FE of 90%±3%,which are much higher than those values on Pd/C(1.2±0.2 A mgPd−1 for mass activity and 63%±4%for total FE).Combined results of in-situ attenuated total reflection surface enhanced infrared absorption spectroscopy and density functional theory calculations show that Bi suppresses the dissociation of glycerol through the“shielding effect”of Bi to the adjacent Pd sites,which weakens the adsorption strength of GOR intermediates on those sites.This work provides a new insight into the GOR mechanism and puts forward a valid strategy for the rational design of catalysts to enable the transformation of glycerol into high-value-added products.展开更多
The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.A...The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.展开更多
Developing efficient and durable electrocatalysts for acidic oxygen evolution reaction(OER)is pivotal for advancing proton exchange membrane water electrolysis(PEMWEs),yet balancing activity and stability remains a fo...Developing efficient and durable electrocatalysts for acidic oxygen evolution reaction(OER)is pivotal for advancing proton exchange membrane water electrolysis(PEMWEs),yet balancing activity and stability remains a formidable challenge.Herein,we propose a dual-engineering strategy to stabilize Ru-based catalysts by synergizing the oxygen vacancy site-synergized mechanism-lattice oxygen mechanism(OVSM-LOM)with Ru-N bond stabilization.The engineered RuO_(2)@NCC catalyst exhibits exceptional OER performance in 0.5 M H2SO4,achieving an ultralow overpotential of 215 mV at 10 mA cm^(-2) and prolonged stability for over 327 h.The catalyst delivers 300 h of continuous operation at 1 A cm^(-2),with a negligible degradation rate of only 0.067 mV h-1,further demonstrating its potential for practical application.Oxygen vacancies unlock the OVSM-LOM pathway,bypassing the sluggish adsorbate evolution mechanism(AEM)and accelerating reaction kinetics,while the Ru-N bonds suppress Ru dissolution by anchoring low-valent Ru centers.Quasi-in situ X-ray photoelectron spectroscopy(XPS),X-ray absorption spectroscopy(XAS),and isotopic labeling experiments confirm the lattice oxygen participation with *O formation as the rate-determining step.The Ru-N bonds reinforce the structural integrity by stabilizing low-valent Ru centers and inhibiting overoxidation.Theoretical calculations further verify that the synergistic interaction between OVs and Ru-O(N)active sites optimizes the Ru d-band center and stabilizes intermediates,while Ru-N coordination enhances structural integrity.This study establishes a novel paradigm for designing robust acidic OER catalysts through defect and coordination engineering,bridging the gap between activity and stability for sustainable energy technologies.展开更多
Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,...Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.展开更多
To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,w...To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,we report a hollow-structured Ni_(x)Co_(1−x)O/Ni_(3)S_(2)/Co_(9)S_(8)heterostructure synthesized via sequential template-assisted growth,thermal oxidation,and controlled sulfidation process.The abundant bimetallic heterointerfaces not only provide additional active sites but also promote electronic modulation via charge redistribution.Additionally,the porous and hollow architecture enhances active surface area and mass transfer ability,thereby increasing the number of accessible active sites for alkaline OER.As a result,the prepared electrocatalyst achieves low overpotential of 310 mV at 10 mA cm^(−2)and small Tafel slope of 55.94 mV dec^(−1),demonstrating the exceptional electrocatalytic performance for alkaline OER.When integrated as the anode in an AEMWE cell,it delivers outstanding performance with only 1.657 V at 1.0 A cm^(−2)and reaches high current density of 5.0 A cm^(−2)at 1.989 V,surpassing those of commercial RuO_(2).The cell also shows excellent long-term durability over 100 h with minimal degradation.This study highlights the strong potential of rationally engineered oxide/sulfide heterostructures for next-generation alkaline water electrolysis.展开更多
In this study,we meticulously designed a layered carbon-based catalytic material to induce the degradation of a series of organic pollutants by activating peroxymonosulfate(PMS) in the PMS-based advanced oxidation pro...In this study,we meticulously designed a layered carbon-based catalytic material to induce the degradation of a series of organic pollutants by activating peroxymonosulfate(PMS) in the PMS-based advanced oxidation processes(AOPs).Results indicated that the silicon and oxygen elements from the montmorillonite were incorporated into the catalyst matrix to form the Si-O-C structure.It was notable that the layered carbonaceous material with Si-O-C structure exhibited an outstanding catalytic effect on the synthesized layered catalytic material array,achieving over 90 % removal rate of most pollutants within 60 min.It was notable that the layered carbonaceous material with Si-O-C structure exhibited an outstanding catalytic effect on the synthesized layered catalytic material array.The salt bridge system confirmed that pollutants can provide electrons to the Si-O-C/PMS system,and we verified that the electron transfer process(ETP) mechanism was the main pathway for the degradation of pollutants in the Si-O-C/PMS system via the open-circuit potential analysis.In combination with the structural properties of different pollutants,we discovered that electron-donating pollutants can supply more electrons to the Si-O-C/PMS system,thereby enhancing the ETP process.The findings of this study are anticipated to advance the development and practical application of layered carbonaceous materials-based catalysts and support the design and implementation of nanoconfined catalysts in the field of AOPs.展开更多
As an important class of phenanthroline derivatives containing soft N and hard O donor atoms,the laborious syntheses of unsymmetrical 1,10-phenanthroline-derived diamide ligands(DAPhen) have hindered its extensive stu...As an important class of phenanthroline derivatives containing soft N and hard O donor atoms,the laborious syntheses of unsymmetrical 1,10-phenanthroline-derived diamide ligands(DAPhen) have hindered its extensive study.In this work,we first report a convenient synthetic method for the construction of DAPhen using Friedländer reaction by two facile steps(vs.previous 12 steps).A variety of DAPhen ligands are readily available,especially unsymmetrical ones,which give us a platform to systematically study the substituent effect on f-block elements extraction performance.The performance of unsymmetrical extractants is experimentally confirmed to falls between that of their corresponding symmetrical extractants by extracting UO_(2)^(2+) as the representative f-block element.This work provides a direct and versatile method to synthesize symmetrical and unsymmetrical DAPhen,which paves way for the investigations on their coordination properties with metal ions and other applications.展开更多
RNA binding proteins(RBPs) are a crucial class of proteins that interact with RNA and play a key role in various biological process.Deficiencies or abnormalities of RBPs are closely linked to the occurrence and progre...RNA binding proteins(RBPs) are a crucial class of proteins that interact with RNA and play a key role in various biological process.Deficiencies or abnormalities of RBPs are closely linked to the occurrence and progression of numerous diseases,making RBPs potential therapeutic targets.However,the limited tissue penetration of 254 nm UV irradiation makes it difficult to efficiently crosslink weak and dynamic RNA-protein interactions in mammal tissues.Additionally,RNA degradation in metal catalyzed click reaction further hinders the enrichment of RNA-protein complexes(RPCs).Due to these inherent limitations,globally profiling the RNA binding proteome in mammal organs has long been a challenge.Herein,we proposed a novel method,which utilized a dual crosslinking with formaldehyde and 254 nm UV irradiation,metabolic labeling and metal-free thiol-yne click reaction to enable large-scale enrichment and identification of RBPs in mouse liver,called FTYc_UV.In this method,formaldehyde is first used to crosslink the crude RNA-protein complexes(cRPCs) in situ to address the problem of poor tissue penetration of 254 nm UV irradiation.Furthermore,this method integrates metabolic labeling with a metal-free thiol-yne click reaction to achieve non-destructive RNA tagging.After specifically RNA-RBPs crosslinking by 254 nm UV irradiation in tissue lysates,formaldehyde decrosslinking is employed to remove non-specific proteins,leading to effective enrichment of RPCs from mouse liver and thereby overcoming the poor specificity of formaldehyde crosslinking.Application of FTYc_UV in mouse liver successfully identified over 1600 RBPs covering approximately 75 % of previously reported RBPs.Furthermore,420 candidate RBPs,including 151metabolic enzymes,were also obtained,demonstrating the sensitivity of FTYc_UV and the potential of this method for in-depth exploration of RNA-protein interactions in biological and clinical research.展开更多
The growing volume of end-of-life lithium-ion batteries(LIBs)represents both an urgent environmental challenge and a critical resource opportunity,especially for cathode materials.Among commercial cathodes,LiFePO4(LFP...The growing volume of end-of-life lithium-ion batteries(LIBs)represents both an urgent environmental challenge and a critical resource opportunity,especially for cathode materials.Among commercial cathodes,LiFePO4(LFP)dominates the market due to its favorable properties;thus,a substantial amount of LFP cathode materials is expected to retire in the near future.The conventional hydrometallurgical method suffers from high costs and serious pollution.Direct regeneration technologies,especially solid-state sintering,provide a more efficient and environmentally benign alternative by repairing cathode structures through high-temperature solid-phase reactions without extra chemical reagents.Traditional solid-state sintering faces challenges in processing spent LFP from diverse sources,struggling to achieve the homogenization of physical–chemical properties and electrochemical performance.To address the limitations above,phase homogenization with a lattice reconstruction strategy has been investigated,which can enable effective lattice reconstruction and microstructural homogenization,demonstrating robust adaptability to spent samples from variable sources.This review systematically summarizes the mechanisms,detailed steps,characterization techniques,and advances in pre-oxidation optimization(including ion-doping and coated carbon layer modification),as well as future research directions for sustainable LFP recycling.Given this,this review is expected to offer theoretical guidance for achieving homogeneous regeneration of LFP cathode.展开更多
Controllable synthesis of ultrathin metallene nanosheets and rational design of their spatial arrangement in favor of electrochemical catalysis are critical for their renewable energy applications.Here,a biomimetic de...Controllable synthesis of ultrathin metallene nanosheets and rational design of their spatial arrangement in favor of electrochemical catalysis are critical for their renewable energy applications.Here,a biomimetic design of“Trunk-Branch-Leaf”strategy is proposed to prepare the ultrathin edge-riched Zn-ene“leaves”with a thickness of~2.5 nm,adjacent Zn-ene cross-linked with each other,which are supported by copper nanoneedle“branches”on copper mesh“trunks,”named as Zn-ene/Cu-CM.The resulting superstructure enables the formation of an interconnected network and multiple channels,which can be used as an electrocatalytic CO_(2) reduction reaction(CO_(2)RR)electrode to allow a fast charge and mass transfer as well as a large electrolyte reservoir.By virtue of the distinctive structure,the obtained Zn-ene/Cu-CM electrode exhibits excellent selectivity and activity toward CO production with a maximum Faradaic efficiency of 91.3%and incredible partial current density up to 40 mA cm^(−2),outperforming most of the state-of-the-art Zn-based electrodes for CO_(2) reduction.The phenolphthalein color probe combined with in situ attenuated total reflection-infrared spectroscopy uncovered the formation of the localized pseudo-alkaline microenvironment at the interface of the Zn-ene/Cu-CM electrode.Theoretical calculations confirmed that the localized pH as the origin is responsible for the adsorption of CO_(2) at the interface and the generation of *COOH and *CO intermediates.This study offers valuable insights into developing efficient electrodes through synergistic regulation of reaction microenvironments and active sites,thereby facilitating the electrolysis of practical CO_(2) conversion.展开更多
Developing catalysts with excellent stability while significantly reducing the overpotential of the oxygen evolution reaction(OER) is crucial for advancing overall water splitting(OWS) systems.In this study,we synthes...Developing catalysts with excellent stability while significantly reducing the overpotential of the oxygen evolution reaction(OER) is crucial for advancing overall water splitting(OWS) systems.In this study,we synthesized the electrode material Ce-NiCo-LDHs@SnO_(2)/NF through a two-step hydrothermal reaction,where Ce-doped NiCo-LDHs are grown on nickel foam modified by a SnO_(2) layer.Ce doping adjusts the internal electronic distribution of Ni Co-LDHs,while the introduction of the SnO_(2) layer enhances electron transfer capability.Together,these factors contribute to the reduction of the OER energy barrier and experimental evidence confirms that the reaction proceeds via the lattice oxygen evolution mechanism(LOM).Consequently,Ce-NiCo-LDHs@SnO_(2)/NF exhibits high level electrochemical performance in OER,requiring only 234 m V overpotential to achieve a current density of 10 m A/cm^(2),with a Tafel slope of just 27.39 m V/dec.When paired with Pt/C/NF,an external potential of only 1.54 V is needed to drive OWS to attain a current density amounting to 10 m A/cm^(2).Furthermore,the catalyst demonstrates stability for 100 h during the OWS stability test.This study underscores the feasibility of enhancing the OER performance through Ce doping and the introduction of a conductive SnO_(2) layer.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.52204345 and 52474361)the Scientific Research Innovation Projects of Graduate Student of Jiangsu province,China(No.KYCX24_4184)。
文摘The large-scale production of high-Ti steels is limited by the formation of Ti-containing oxides or nitrides in steel-slag reactions during continuous casting.These processes degrade mold flux properties,clog submerged entry nozzles,form floaters in the molds,and produce various surface defects on the cast slabs.This review summarizes the effects of nonmetallic inclusions on traditional CaO-SiO_(2)-based(CS)mold fluxes and novel CaO-Al_(2)O_(3)-based(CA)low-or non-reactive fluxes containing TiO_(2),BaO,and B_(2)O_(3)additives to avoid undesirable steel,slag,and inclusion reactions,with the aim of providing a new perspective for research and practice related to balancing the lubrication and heat transfer of mold fluxes to promote smooth operation and reduce surface defects on cast slabs.For traditional CS mold flux,although the addition of solvents such as Na_(2)O,Li_(2)O,and B_(2)O_(3)can enhance flowability,steel-slag reactions persist,limiting the effectiveness of CS mold fluxes in high-Ti steel casting.Low-or non-reactive CA mold fluxes with reduced SiO_(2)content are a research focus,where adding other components can significantly change flux characteristics.Replacing CaO with BaO can lower the melting point and inhibit crystallization,allowing the flux to maintain good flowability at low temperatures.Replacing SiO_(2)with TiO_(2)can stabilize the viscosity and enhance heat transfer.To reduce the environmental impact,fluorides are replaced with components such as TiO_(2),B_(2)O_(3),BaO,Li_(2)O,and Na_(2)O for F-frce mold fluxes with similar lubrication,crystallization,and heat-transfer effects.When TiO_(2)replaces CaF_(2),it stabilizes the viscosity and enhances the heat conductivity,forming CaTiO_(3)and CaSiTiO_(5)phases instead of cuspidine to control crystallization.B_(2)O_(3)lowers the melting point and suppresses crystallization,forming phases such as Ca_(3)B_(2)O_(6)and Ca_(11)Si_(4)B_(2)O_(22).BaO introduces non-bridging oxygen to reduce viscosity and ensure flux flowability at low temperatures.However,further studies are required to determine the optimal mold flux compositions corresponding to the steel grades and the interactions between the various components of the mold flux.In the future,the practical application of new mold fluxes for high-Ti steel will become the focus of further verification to achieve a balance between lubrication and heat transfer,which is expected to minimize the occurrence of casting problems and slab defects.
文摘Three copper(Ⅱ),nickel and cadmium(Ⅱ)complexes,namely[Cu_(2)(μ-H2dbda)2(phen)2]·2H_(2)O(1),[Ni(μ-H2dbda)(μ-bpb)(H_(2)O)2]n(2),and[Cd(μ-H2dbda)(μ-bpa)]n(3),have been constructed hydrothermally using H4dbda(4,4'-dihydroxy-[1,1'-biphenyl]-3,3'-dicarboxylic acid),phen(1,10-phenanthroline),bpb(1,4-bis(pyrid-4-yl)benzene),bpa(bis(4-pyridyl)amine),and copper,nickel and cadmium chlorides at 160℃.The products were isolated as stable crystalline solids and were characterized by IR spectra,elemental analyses,thermogravimetric analyses,and singlecrystal X-ray diffraction analyses.Single-crystal X-ray diffraction analyses revealed that three complexes crystallize in the monoclinic P21/n,tetragonal I42d,and orthorhombic P21212 space groups.The complexes exhibit molecular dimers(1)or 2D metal-organic networks(2 and 3).The catalytic performances in the Knoevenagel reaction of these complexes were investigated.Complex 1 exhibits an effective catalytic activity and excellent reusability as a heterogeneous catalyst in the Knoevenagel reaction at room temperature.CCDC:2463800,1;2463801,2;2463802,3.
文摘Three zinc(Ⅱ),nickel(Ⅱ),and cadmium(Ⅱ)complexes,namely[Zn(μ-Htpta)(py)_(2)]n(1),[Ni(H_(2)biim)2(H_(2)O)2][Ni(tpta)(H_(2)biim)2(H_(2)O)]2·3H_(2)O(2),and[Cd_(3)(μ4-tpta)2(μ-dpe)_(3)]_(n)(3),have been constructed hydrothermally at 160℃ using H_(3)tpta([1,1':3',1″-terphenyl]-4,4',5'-tricarboxylic acid),py(pyridine),H_(2)biim(2,2'-biimidazole),dpe(1,2-di(4-pyridyl)ethylene),and zinc,nickel and cadmium chlorides,resulting in the formation of stable crystalline solids which were subsequently analyzed using infrared spectroscopy,element analysis,thermogravimetric analysis,as well as structural analyses conducted via single-crystal X-ray diffraction.The findings from these single-crystal Xray diffraction studies indicate that complexes 1-3 form crystals within the monoclinic system P2_(1)/c space group(1)or triclinic system P1 space group(2 and 3),and possess 1D,0D,and 3D structures,respectively.Complex 1 demonstrated substantial catalytic efficiency and excellent reusability as a heterogeneous catalyst in the reaction of Knoevenagel condensation under ambient temperature conditions.In addition,complex 1 also showcased notable anti-wear performance when used in polyalphaolefin synthetic lubricants.CCDC:2449810,1;2449811,2;2449812,3.
文摘A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and Mo2S3 nanoparticles were integrated at the edges of Co3O4 nanosheets,creating a rich,heterogeneous interface that enhances the synergistic effects of each component.In an alkaline electrolyte,the synthesized CoMoNiO-S/NF-110 exhibited superior electrocatalytic performance for oxygen evolution reaction(OER),achieving current densities of 100 and 200 mA·cm^(-2) with low overpotentials of 199.4 and 224.4 mV,respectively,outperforming RuO2 and several high-performance Mo and Ni-based catalysts.This excellent performance is attributed to the rich interface formed between the components and active sites exposed by the defect structure.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
文摘The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecules and{[Co2(BINDI)(DMA)_(2)]·DMA}_(n)(Co-MOF,H4BINDI=N,N'-bis(5-isophthalic acid)naphthalenediimide,DMA=N,N-dimethylacetamide)was synthesized via a one-pot method,leveragingπ-πinteractions between pyrene and Co-MOF to modulate electrical conductivity.Results demonstrate that the Py@Co-MOF catalyst exhibited significantly enhanced OER performance compared to pure Co-MOF or pyrene-based electrodes,achieving an overpotential of 246 mV at a current density of 10 mA·cm^(-2) along with excellent stability.Density functional theory(DFT)calculations reveal that the formation of O*in the second step is the rate-determining step(RDS)during the OER process on Co-MOF,with an energy barrier of 0.85 eV due to the weak adsorption affinity of the OH*intermediate for Co sites.CCDC:2419276.
基金Supported by the National Key Research and Development Program of China(2023YFB4104500,2023YFB4104502)the National Natural Science Foundation of China(22138013)the Taishan Scholar Project(ts201712020).
文摘Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.
文摘CO_(2)reduction technology can promote the resource utilization of carbon and help alleviate global warming and energy supply pressure.It is an effective way to achieve energy conversion and utilization.Covalent organic frameworks(COFs)are porous crystalline materials formed by connecting organic monomers through covalent bonds.They have the characteristics of functional diversity and rich chemical properties.Their advantages,such as high porosity,a wide range of visible light absorption,and excellent charge separation efficiency,give them good potential in CO_(2)capture,separation,and conversion.Currently,Cu is a key metal in the catalytic CO_(2)reduction reaction(CO_(2)RR)for the preparation of high-value-added chemicals.The preparation of highly stable and large-pore Cu-based COFs using COFs as an ideal sacrificial template for loading Cu can be used to develop high-performance electrocatalysts and photocatalysts.In this review,we discuss the latest advancements in this field,including the development of various Cu-based COFs and their applications as catalysts for CO_(2)RR.Here,we mainly introduce the synthesis strategies,some important characterization information,and the applications of electrocatalytic and photocatalytic CO_(2)conversion using these previously reported Cu-based COFs.
基金supported by the National Natural Science Foundation of China(Nos.22268003,22102095,52204320,U20A20246 and 12275199,U22A20418,22075196,21972110,52202208)National Key Research and Development Program of China(Nos.2023YFA1507903,2022YFB3803600,2022YFB4002501)+9 种基金SINOPEC(Beijing)Research Institute of Chemical Industry Co.,Ltd.(No.223239)the Fundamental Research Funds for the Central Universities(No.CCNU22JC017)the Postdoctoral Science Foundation of China(No.2021M692535)the Natural Science Foundation of Shaanxi Province(No.2022JQ-095)the Basic Research Project Foundation of Xi’an Jiaotong University(No.xzy012024012)the Youth Foundation of State Key Laboratory of Electrical Insulation and Power Equipment(No.EIPE2131)the Russian Science Foundation(No.22-13-00035)the Ministry of Science and Higher Education within the framework of a State Assignment of the Ioffe Institute,Russian Academy of Sciences(No.FFUG-2024-0036)Yunnan Fundamental Research Projects(No.202305AF150116)the Research Project Supported by Shanxi Scholarship Council of China(No.2022-050)。
文摘The catalytic transferred of small molecules into high-value chemical products in green methods are highly perused,and has obtained huge attention.In this field,great progress has been achieved during the past five years.Followed by the roadmap(Chinese Chemical Letters,2019,30,2089-2109)written by us before five years,we think that it should be updated to give more insights in this field.Thus,we write the present roadmap based on the fast changed background.In this roadmap,oxygen and carbon dioxide reduction reactions(including at high temperature),photocatalytic hydrogen generation and carbon dioxide reduction reactions,(photo)electrocatalytic reduction of O_(2)to H_(2)O_(2)and NH_(3)generated from N_(2) are discussed.The progress and challenges in above catalytic processes are given.We believe this manuscript will give the researchers more suggestions and help them to obtain useful information in this field.
基金supported by the National Natural Science Foundation of China(Grant number 22172112)and the Fundamental Research Funds for the Central Universities.
文摘Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxidation reaction(GOR);however,glycerol inevitably dissociates and converts to carbon dioxide on the Pd surface,which results in its low total Faradaic efficiency(FE)for high-value-added products.Herein,a series of Pd/C and Pd10Bix/C catalysts were synthesized to investigate the GOR pathway.The Pd10Bi3/C catalyst with optimal Bi content achieved an excellent GOR mass activity of 7.5±0.2 A mgPd−1 and an outstanding total FE of 90%±3%,which are much higher than those values on Pd/C(1.2±0.2 A mgPd−1 for mass activity and 63%±4%for total FE).Combined results of in-situ attenuated total reflection surface enhanced infrared absorption spectroscopy and density functional theory calculations show that Bi suppresses the dissociation of glycerol through the“shielding effect”of Bi to the adjacent Pd sites,which weakens the adsorption strength of GOR intermediates on those sites.This work provides a new insight into the GOR mechanism and puts forward a valid strategy for the rational design of catalysts to enable the transformation of glycerol into high-value-added products.
基金financially supported by the National Natural Science Foundation of China(Nos.52034002 and U2202254)the Fundamental Research Funds for the Central Universities,China(No.FRF-TT-19-001)。
文摘The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.
基金support from the National Natural Science Foundation of China(Nos.12305373 and 52276220)the Guangzhou Basic Research Program(No.SL2024A04J00234).
文摘Developing efficient and durable electrocatalysts for acidic oxygen evolution reaction(OER)is pivotal for advancing proton exchange membrane water electrolysis(PEMWEs),yet balancing activity and stability remains a formidable challenge.Herein,we propose a dual-engineering strategy to stabilize Ru-based catalysts by synergizing the oxygen vacancy site-synergized mechanism-lattice oxygen mechanism(OVSM-LOM)with Ru-N bond stabilization.The engineered RuO_(2)@NCC catalyst exhibits exceptional OER performance in 0.5 M H2SO4,achieving an ultralow overpotential of 215 mV at 10 mA cm^(-2) and prolonged stability for over 327 h.The catalyst delivers 300 h of continuous operation at 1 A cm^(-2),with a negligible degradation rate of only 0.067 mV h-1,further demonstrating its potential for practical application.Oxygen vacancies unlock the OVSM-LOM pathway,bypassing the sluggish adsorbate evolution mechanism(AEM)and accelerating reaction kinetics,while the Ru-N bonds suppress Ru dissolution by anchoring low-valent Ru centers.Quasi-in situ X-ray photoelectron spectroscopy(XPS),X-ray absorption spectroscopy(XAS),and isotopic labeling experiments confirm the lattice oxygen participation with *O formation as the rate-determining step.The Ru-N bonds reinforce the structural integrity by stabilizing low-valent Ru centers and inhibiting overoxidation.Theoretical calculations further verify that the synergistic interaction between OVs and Ru-O(N)active sites optimizes the Ru d-band center and stabilizes intermediates,while Ru-N coordination enhances structural integrity.This study establishes a novel paradigm for designing robust acidic OER catalysts through defect and coordination engineering,bridging the gap between activity and stability for sustainable energy technologies.
基金supported by the National Key Research and Development Program of China(2024YFA1612900)the National Natural Science Foundation of China(Grant No.52103365 and No.12375270)the Guangdong Innovative and Entrepreneurial Research Team Program,China(Grant No.2021ZT09L227).
文摘Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.
基金supported by the Korea Institute for Advancement of Technology(KIAT)and the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.P0022130)by the Institute of Information&Communications Technology Planning&Evaluation(IITP)-Innovative Human Resource Development for Local Intellectualization program grant funded by the Korea government(MSIT)(IITP-2025-RS-2023-00259678).
文摘To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,we report a hollow-structured Ni_(x)Co_(1−x)O/Ni_(3)S_(2)/Co_(9)S_(8)heterostructure synthesized via sequential template-assisted growth,thermal oxidation,and controlled sulfidation process.The abundant bimetallic heterointerfaces not only provide additional active sites but also promote electronic modulation via charge redistribution.Additionally,the porous and hollow architecture enhances active surface area and mass transfer ability,thereby increasing the number of accessible active sites for alkaline OER.As a result,the prepared electrocatalyst achieves low overpotential of 310 mV at 10 mA cm^(−2)and small Tafel slope of 55.94 mV dec^(−1),demonstrating the exceptional electrocatalytic performance for alkaline OER.When integrated as the anode in an AEMWE cell,it delivers outstanding performance with only 1.657 V at 1.0 A cm^(−2)and reaches high current density of 5.0 A cm^(−2)at 1.989 V,surpassing those of commercial RuO_(2).The cell also shows excellent long-term durability over 100 h with minimal degradation.This study highlights the strong potential of rationally engineered oxide/sulfide heterostructures for next-generation alkaline water electrolysis.
基金supported by National Natural Science Foundation of China (Nos.52170086,22476116,52074176)Natural Science Foundation of Shandong Province (Nos.ZR2021ME013,ZR2024ME156,ZR2022QB250)。
文摘In this study,we meticulously designed a layered carbon-based catalytic material to induce the degradation of a series of organic pollutants by activating peroxymonosulfate(PMS) in the PMS-based advanced oxidation processes(AOPs).Results indicated that the silicon and oxygen elements from the montmorillonite were incorporated into the catalyst matrix to form the Si-O-C structure.It was notable that the layered carbonaceous material with Si-O-C structure exhibited an outstanding catalytic effect on the synthesized layered catalytic material array,achieving over 90 % removal rate of most pollutants within 60 min.It was notable that the layered carbonaceous material with Si-O-C structure exhibited an outstanding catalytic effect on the synthesized layered catalytic material array.The salt bridge system confirmed that pollutants can provide electrons to the Si-O-C/PMS system,and we verified that the electron transfer process(ETP) mechanism was the main pathway for the degradation of pollutants in the Si-O-C/PMS system via the open-circuit potential analysis.In combination with the structural properties of different pollutants,we discovered that electron-donating pollutants can supply more electrons to the Si-O-C/PMS system,thereby enhancing the ETP process.The findings of this study are anticipated to advance the development and practical application of layered carbonaceous materials-based catalysts and support the design and implementation of nanoconfined catalysts in the field of AOPs.
基金financial support from the National Natural Science Foundation of China (Nos.22476178,U2067213)Natural Science Foundation of Zhejiang Province (No.LRG25B060002)。
文摘As an important class of phenanthroline derivatives containing soft N and hard O donor atoms,the laborious syntheses of unsymmetrical 1,10-phenanthroline-derived diamide ligands(DAPhen) have hindered its extensive study.In this work,we first report a convenient synthetic method for the construction of DAPhen using Friedländer reaction by two facile steps(vs.previous 12 steps).A variety of DAPhen ligands are readily available,especially unsymmetrical ones,which give us a platform to systematically study the substituent effect on f-block elements extraction performance.The performance of unsymmetrical extractants is experimentally confirmed to falls between that of their corresponding symmetrical extractants by extracting UO_(2)^(2+) as the representative f-block element.This work provides a direct and versatile method to synthesize symmetrical and unsymmetrical DAPhen,which paves way for the investigations on their coordination properties with metal ions and other applications.
基金financial support from the National Key R&D Program of China (No.2021YFA1302604)Scientific and technological innovation project of China Academy of Chinese Medical Sciences (No.CI2021B017)China Postdoctoral Science Foundation (No.2023T160727)。
文摘RNA binding proteins(RBPs) are a crucial class of proteins that interact with RNA and play a key role in various biological process.Deficiencies or abnormalities of RBPs are closely linked to the occurrence and progression of numerous diseases,making RBPs potential therapeutic targets.However,the limited tissue penetration of 254 nm UV irradiation makes it difficult to efficiently crosslink weak and dynamic RNA-protein interactions in mammal tissues.Additionally,RNA degradation in metal catalyzed click reaction further hinders the enrichment of RNA-protein complexes(RPCs).Due to these inherent limitations,globally profiling the RNA binding proteome in mammal organs has long been a challenge.Herein,we proposed a novel method,which utilized a dual crosslinking with formaldehyde and 254 nm UV irradiation,metabolic labeling and metal-free thiol-yne click reaction to enable large-scale enrichment and identification of RBPs in mouse liver,called FTYc_UV.In this method,formaldehyde is first used to crosslink the crude RNA-protein complexes(cRPCs) in situ to address the problem of poor tissue penetration of 254 nm UV irradiation.Furthermore,this method integrates metabolic labeling with a metal-free thiol-yne click reaction to achieve non-destructive RNA tagging.After specifically RNA-RBPs crosslinking by 254 nm UV irradiation in tissue lysates,formaldehyde decrosslinking is employed to remove non-specific proteins,leading to effective enrichment of RPCs from mouse liver and thereby overcoming the poor specificity of formaldehyde crosslinking.Application of FTYc_UV in mouse liver successfully identified over 1600 RBPs covering approximately 75 % of previously reported RBPs.Furthermore,420 candidate RBPs,including 151metabolic enzymes,were also obtained,demonstrating the sensitivity of FTYc_UV and the potential of this method for in-depth exploration of RNA-protein interactions in biological and clinical research.
基金financially supported by National Natural Science Key Foundation of China(52534010)National Natural Science Foundation of China(52374288,52204298)+2 种基金Young Elite Scientists Sponsorship Program by China Association for Science and Technology(2022QNRC001)National Key Research and Development Program of China(2022YFC3900805-4/7)Collaborative Innovation Centre for Clean and Efficient Utilization of Strategic Metal Mineral Resources,Found of State Key Laboratory of Mineral Processing(BGRIMM-KJSKL-2017-13).
文摘The growing volume of end-of-life lithium-ion batteries(LIBs)represents both an urgent environmental challenge and a critical resource opportunity,especially for cathode materials.Among commercial cathodes,LiFePO4(LFP)dominates the market due to its favorable properties;thus,a substantial amount of LFP cathode materials is expected to retire in the near future.The conventional hydrometallurgical method suffers from high costs and serious pollution.Direct regeneration technologies,especially solid-state sintering,provide a more efficient and environmentally benign alternative by repairing cathode structures through high-temperature solid-phase reactions without extra chemical reagents.Traditional solid-state sintering faces challenges in processing spent LFP from diverse sources,struggling to achieve the homogenization of physical–chemical properties and electrochemical performance.To address the limitations above,phase homogenization with a lattice reconstruction strategy has been investigated,which can enable effective lattice reconstruction and microstructural homogenization,demonstrating robust adaptability to spent samples from variable sources.This review systematically summarizes the mechanisms,detailed steps,characterization techniques,and advances in pre-oxidation optimization(including ion-doping and coated carbon layer modification),as well as future research directions for sustainable LFP recycling.Given this,this review is expected to offer theoretical guidance for achieving homogeneous regeneration of LFP cathode.
基金supports of the National Natural Science Foundation of China(NSFC)(52021004,52394202)key project of the Joint Fund for Innovation and Development of Chongqing Natural Science Foundation(CSTB2022NSCQ-LZX0013)+1 种基金the National Natural Science Foundation of China(NSFC)(52301232,and 52476056)the Natural Science Foundation of Chongqing Province(2024NSCQ-MSX1109).
文摘Controllable synthesis of ultrathin metallene nanosheets and rational design of their spatial arrangement in favor of electrochemical catalysis are critical for their renewable energy applications.Here,a biomimetic design of“Trunk-Branch-Leaf”strategy is proposed to prepare the ultrathin edge-riched Zn-ene“leaves”with a thickness of~2.5 nm,adjacent Zn-ene cross-linked with each other,which are supported by copper nanoneedle“branches”on copper mesh“trunks,”named as Zn-ene/Cu-CM.The resulting superstructure enables the formation of an interconnected network and multiple channels,which can be used as an electrocatalytic CO_(2) reduction reaction(CO_(2)RR)electrode to allow a fast charge and mass transfer as well as a large electrolyte reservoir.By virtue of the distinctive structure,the obtained Zn-ene/Cu-CM electrode exhibits excellent selectivity and activity toward CO production with a maximum Faradaic efficiency of 91.3%and incredible partial current density up to 40 mA cm^(−2),outperforming most of the state-of-the-art Zn-based electrodes for CO_(2) reduction.The phenolphthalein color probe combined with in situ attenuated total reflection-infrared spectroscopy uncovered the formation of the localized pseudo-alkaline microenvironment at the interface of the Zn-ene/Cu-CM electrode.Theoretical calculations confirmed that the localized pH as the origin is responsible for the adsorption of CO_(2) at the interface and the generation of *COOH and *CO intermediates.This study offers valuable insights into developing efficient electrodes through synergistic regulation of reaction microenvironments and active sites,thereby facilitating the electrolysis of practical CO_(2) conversion.
基金supported by the National Natural Science Foundation of China (No.52274304)。
文摘Developing catalysts with excellent stability while significantly reducing the overpotential of the oxygen evolution reaction(OER) is crucial for advancing overall water splitting(OWS) systems.In this study,we synthesized the electrode material Ce-NiCo-LDHs@SnO_(2)/NF through a two-step hydrothermal reaction,where Ce-doped NiCo-LDHs are grown on nickel foam modified by a SnO_(2) layer.Ce doping adjusts the internal electronic distribution of Ni Co-LDHs,while the introduction of the SnO_(2) layer enhances electron transfer capability.Together,these factors contribute to the reduction of the OER energy barrier and experimental evidence confirms that the reaction proceeds via the lattice oxygen evolution mechanism(LOM).Consequently,Ce-NiCo-LDHs@SnO_(2)/NF exhibits high level electrochemical performance in OER,requiring only 234 m V overpotential to achieve a current density of 10 m A/cm^(2),with a Tafel slope of just 27.39 m V/dec.When paired with Pt/C/NF,an external potential of only 1.54 V is needed to drive OWS to attain a current density amounting to 10 m A/cm^(2).Furthermore,the catalyst demonstrates stability for 100 h during the OWS stability test.This study underscores the feasibility of enhancing the OER performance through Ce doping and the introduction of a conductive SnO_(2) layer.
