Baizhi, as a medicinal plant, has been demonstrated to be useful for the treatment of aches and pains in China. The physicochemical characterization of Baizhi particles is greatly influenced by ultrafine pulverization...Baizhi, as a medicinal plant, has been demonstrated to be useful for the treatment of aches and pains in China. The physicochemical characterization of Baizhi particles is greatly influenced by ultrafine pulverization. To study the physicochemical characterization of Baizhi, the raw plant material of Baizhi was ground to 6 μm particles by a high speed centrifugal sheering （HSCS） pulverizer. The micron particles were characterized by optical microscopy and scanning electron microscopy （SEM）. Imperatorin is one of the active ingredients of Baizhi, and its extraction yield is determined to evaluate the chemical characterization of Baizhi powder. Imperatorin was analyzed by high performance liquid chromatography （HPLC）. The results show that after ultrafine pulverization, the plant cell walls are broken into pieces and the extraction yield of imperatorin is increased by 11.93% compared with the normal particles.展开更多
Degradation behaviors of three typical La-Mg-Ni alloys, La2MgNi9, La1.5Mg0.5Ni7 and La4MgNi19, were studied. La1.5- Mg0.5Ni7 with （La,Mg）2Ni7 as main phase presents better discharge capacity and cycling stability. T...Degradation behaviors of three typical La-Mg-Ni alloys, La2MgNi9, La1.5Mg0.5Ni7 and La4MgNi19, were studied. La1.5- Mg0.5Ni7 with （La,Mg）2Ni7 as main phase presents better discharge capacity and cycling stability. The three alloys suffer severe pulverization and corrosion after electrochemical cycles, which are considered to be the significant factor attributing to the capacity deterioration. However, the overall corrosion extent of the three cycled alloys aggravates successively, which is inconsistent with the result that LaEMgNi9 presented poor cycling stability and also the assumption that alloy with high Mg content is easy to be corroded. The intrinsic anti-corrosion and anti-pulverization characteristics of the three alloys are mainly focused in this work. Immersion corrosion experiments demonstrate that the Mg-rich phases are more easily to be corroded. The corrosion resistance of the three alloys presents an improved trend which is inversely proportional to abundance of the Mg-rich phases. However, the anti-pulverization abilities present an inverse trend, which is closely related to the mechanical property of various phase structures. LaNi5 with the highest hardness is easy to crack, but the soft （La,Mg）Ni2 is more resistant to crack formation and spreading. Thus, the weaker corrosion of La2MgNi9 after electro- chemical cycling is attributed to the better intrinsic anti-pulverization capability though the anti-corrosion is poor. As La4MgNi19 possesses excellent corrosion resistance, enhancement of the anti-pulverization ability is urgent for improvement in the cycling stability.展开更多
The crude drug of Liuwei Dihuang was pulverized to nano particles to improve its bioavailability. The appropriate technique parameters were studied. Paeonol, typical marker of Liuwei Dihuang , was extracted with organ...The crude drug of Liuwei Dihuang was pulverized to nano particles to improve its bioavailability. The appropriate technique parameters were studied. Paeonol, typical marker of Liuwei Dihuang , was extracted with organic solveat in ultrasonic and its content was determined by HPLC. The appropriate techrdques parameters are as follows ： rotating speed control 1200 r/ min , grinding time control 50min and mass percent concentration control 3.8% . The experimental results show that the average particle diameter is 161.9 nm and the great majority of the plant cell wall is broken into pieces after nano pulverization. The extraction efficiency of paeonol is increased by 23.5% .展开更多
Measurements of hydrogen absorption desorption behavior of Nb Al alloys, Nb ss (Nb solid sloution), Nb ss +Nb 3Al, Nb 3Al, Nb 3Al+Nb 2Al, were carried out under hydrogen pressure from 0 to 3.4 MPa at 353 and 357 K, al...Measurements of hydrogen absorption desorption behavior of Nb Al alloys, Nb ss (Nb solid sloution), Nb ss +Nb 3Al, Nb 3Al, Nb 3Al+Nb 2Al, were carried out under hydrogen pressure from 0 to 3.4 MPa at 353 and 357 K, along with mircostructural observation and X ray diffraction analysis. It was found that single phase alloys of Nb ss and Nb 3Al are not pulverized regardless of a considerable amount of hydrogen absorption, while two phase alloys of Nb ss +Nb 3Al and Nb 3Al+Nb 2Al are readily pulverized. X ray diffraction analysis indicated that no hydride with crystal structure different from constituent phases is formed by hydrogen absorption, but lattice parameters of Nb ss and Nb 3Al are increased. Pulverization of Nb Cr alloys was investigated under a hydrogen atmosphere of 0.1 MPa in an arc melting chamber without exposure to air after arc melting. Similarly, hydrogen pulverization occurs only in two phase alloys consisting of Nb ss and NbCr 2. Based on the measured lattice parameters of Nb ss and Nb 3Al(NbCr 2) in the hydrogenated two phase alloys and the microstructural observations, a mechanism for hydrogen pulverization is discussed.展开更多
In this study, jet milling was used to recycle tin bronze machining chips into powder. The main purpose of this study was to assess the effect of the microstructure of tin bronze machining chips on their breakage beha...In this study, jet milling was used to recycle tin bronze machining chips into powder. The main purpose of this study was to assess the effect of the microstructure of tin bronze machining chips on their breakage behavior. An experimental target jet mill was used to pulverize machining chips of three different tin bronze alloys containing 7wt%, 10wt%, and 12wt% of tin. Optical and electron microscopy, as well as sieve analysis, were used to follow the trend of pulverization. Each alloy exhibited a distinct rate of size reduction, particle size distribution, and fracture surface appearance. The results showed that the degree of pulverization substantially increased with increasing tin content. This behavior was attributed to the higher number of machining cracks as well as the increased volume fraction of brittle δ phase in the alloys with higher tin contents. The δ phase was observed to strongly influence the creation of machining cracks as well as the nucleation and propagation of cracks during jet milling. In addition, a direct relationship was observed between the mean δ-phase spacing and the mean size of the jet-milled product; i.e., a decrease in the δ-phase spacing resulted in smaller particles.展开更多
基金supported by the National High-Tech Research and Development Program of China (No.2009AA043202)the Special Project of State Administration of Traditional Chinese Medicine, China (No.200807054)
文摘Baizhi, as a medicinal plant, has been demonstrated to be useful for the treatment of aches and pains in China. The physicochemical characterization of Baizhi particles is greatly influenced by ultrafine pulverization. To study the physicochemical characterization of Baizhi, the raw plant material of Baizhi was ground to 6 μm particles by a high speed centrifugal sheering （HSCS） pulverizer. The micron particles were characterized by optical microscopy and scanning electron microscopy （SEM）. Imperatorin is one of the active ingredients of Baizhi, and its extraction yield is determined to evaluate the chemical characterization of Baizhi powder. Imperatorin was analyzed by high performance liquid chromatography （HPLC）. The results show that after ultrafine pulverization, the plant cell walls are broken into pieces and the extraction yield of imperatorin is increased by 11.93% compared with the normal particles.
基金supported financially by the National Natural Science Foundation of China (No. 51761032)the Natural Science Foundation Application of Inner Mongolia (No. 2014MS0526)
文摘Degradation behaviors of three typical La-Mg-Ni alloys, La2MgNi9, La1.5Mg0.5Ni7 and La4MgNi19, were studied. La1.5- Mg0.5Ni7 with （La,Mg）2Ni7 as main phase presents better discharge capacity and cycling stability. The three alloys suffer severe pulverization and corrosion after electrochemical cycles, which are considered to be the significant factor attributing to the capacity deterioration. However, the overall corrosion extent of the three cycled alloys aggravates successively, which is inconsistent with the result that LaEMgNi9 presented poor cycling stability and also the assumption that alloy with high Mg content is easy to be corroded. The intrinsic anti-corrosion and anti-pulverization characteristics of the three alloys are mainly focused in this work. Immersion corrosion experiments demonstrate that the Mg-rich phases are more easily to be corroded. The corrosion resistance of the three alloys presents an improved trend which is inversely proportional to abundance of the Mg-rich phases. However, the anti-pulverization abilities present an inverse trend, which is closely related to the mechanical property of various phase structures. LaNi5 with the highest hardness is easy to crack, but the soft （La,Mg）Ni2 is more resistant to crack formation and spreading. Thus, the weaker corrosion of La2MgNi9 after electro- chemical cycling is attributed to the better intrinsic anti-pulverization capability though the anti-corrosion is poor. As La4MgNi19 possesses excellent corrosion resistance, enhancement of the anti-pulverization ability is urgent for improvement in the cycling stability.
文摘The crude drug of Liuwei Dihuang was pulverized to nano particles to improve its bioavailability. The appropriate technique parameters were studied. Paeonol, typical marker of Liuwei Dihuang , was extracted with organic solveat in ultrasonic and its content was determined by HPLC. The appropriate techrdques parameters are as follows ： rotating speed control 1200 r/ min , grinding time control 50min and mass percent concentration control 3.8% . The experimental results show that the average particle diameter is 161.9 nm and the great majority of the plant cell wall is broken into pieces after nano pulverization. The extraction efficiency of paeonol is increased by 23.5% .
文摘Measurements of hydrogen absorption desorption behavior of Nb Al alloys, Nb ss (Nb solid sloution), Nb ss +Nb 3Al, Nb 3Al, Nb 3Al+Nb 2Al, were carried out under hydrogen pressure from 0 to 3.4 MPa at 353 and 357 K, along with mircostructural observation and X ray diffraction analysis. It was found that single phase alloys of Nb ss and Nb 3Al are not pulverized regardless of a considerable amount of hydrogen absorption, while two phase alloys of Nb ss +Nb 3Al and Nb 3Al+Nb 2Al are readily pulverized. X ray diffraction analysis indicated that no hydride with crystal structure different from constituent phases is formed by hydrogen absorption, but lattice parameters of Nb ss and Nb 3Al are increased. Pulverization of Nb Cr alloys was investigated under a hydrogen atmosphere of 0.1 MPa in an arc melting chamber without exposure to air after arc melting. Similarly, hydrogen pulverization occurs only in two phase alloys consisting of Nb ss and NbCr 2. Based on the measured lattice parameters of Nb ss and Nb 3Al(NbCr 2) in the hydrogenated two phase alloys and the microstructural observations, a mechanism for hydrogen pulverization is discussed.
文摘In this study, jet milling was used to recycle tin bronze machining chips into powder. The main purpose of this study was to assess the effect of the microstructure of tin bronze machining chips on their breakage behavior. An experimental target jet mill was used to pulverize machining chips of three different tin bronze alloys containing 7wt%, 10wt%, and 12wt% of tin. Optical and electron microscopy, as well as sieve analysis, were used to follow the trend of pulverization. Each alloy exhibited a distinct rate of size reduction, particle size distribution, and fracture surface appearance. The results showed that the degree of pulverization substantially increased with increasing tin content. This behavior was attributed to the higher number of machining cracks as well as the increased volume fraction of brittle δ phase in the alloys with higher tin contents. The δ phase was observed to strongly influence the creation of machining cracks as well as the nucleation and propagation of cracks during jet milling. In addition, a direct relationship was observed between the mean δ-phase spacing and the mean size of the jet-milled product; i.e., a decrease in the δ-phase spacing resulted in smaller particles.
