Polydimethylsiloxane (PDMS) rubber latex with two sorts of sensitizers, trimethylol propane tri-methacrylate (TMPTMA) and diethylene glycol di-acrylate (DEGDA), was irradiated with γ-rays and electron beams in variou...Polydimethylsiloxane (PDMS) rubber latex with two sorts of sensitizers, trimethylol propane tri-methacrylate (TMPTMA) and diethylene glycol di-acrylate (DEGDA), was irradiated with γ-rays and electron beams in various conditions. The radiation crosslinking reaction of PDMS occurs in the inner phase of the latex and is relatively isolated from the water phase. Therefore the oxygen and the radicals produced by the radiolysis reaction of water almost have no effect on the crosslinking reaction of polymer. The experimental data correspond with the Charlesby-Pinner relationship in the main. The gelation doses, degree of crosslinking and degradation as well as G values of crosslinking were calculated. From them, the sensitization coefficients were derived to offer a quantitative measurement of the enhancing effect of sensitizer on the radiation crosslinking.展开更多
A novel hydroxypolyether blocked polydimethylsiloxane, poly（ethylene oxide） propyl-b-polydimethylsiloxane-b-propyl poly（ethylene oxide） （PEO-b-PDMS-b-PEO） was synthesized by simple hydrosilation reaction of poly...A novel hydroxypolyether blocked polydimethylsiloxane, poly（ethylene oxide） propyl-b-polydimethylsiloxane-b-propyl poly（ethylene oxide） （PEO-b-PDMS-b-PEO） was synthesized by simple hydrosilation reaction of poly（ethylene glycol） monoallyl ether with α,ω-dihydrogen terminated PDMS （HPDMS）. Fourier transform infrared spectroscopy （FTIR） and IH NMR were used to identify the structure of PEO-b-PDMS-b-PEO and intermediate product HPDMS. Based on the effect investigations of temperature, reactant molar ratio, catalyst and time on the hydrosilation, it was found that the conversion of Si-H bond to SiC bond increased with the increase of catalyst and time, and the reaction completed when the content of catalyst was 22μg/g and the time was 5 h, respectively. Urethane reaction of OH and NCO group confirms that PEO-b-PDMS-b-PEO is more reactive toward to diisocyanate than α,ω-dihydroxylbutyl terminated PDMS.展开更多
Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile...Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.展开更多
The fabrication of a separation layer on the inner surface of a hollow fiber (HF) substrate to form an HF composite membrane offers exciting opportunities for industrial applications, although challenges remain. This ...The fabrication of a separation layer on the inner surface of a hollow fiber (HF) substrate to form an HF composite membrane offers exciting opportunities for industrial applications, although challenges remain. This work reports on the fabrication of a polydimethylsiloxane (PDMS) composite membrane on the inner surface of a single-channel or multi-channel ceramic HF via a proposed coating/crossflow approach. The nanostructures and transport properties of the PDMS HF composite membranes were optimized by controlling the polymer concentration and coating time. The morphology, surface chemistry, interfacial adhesion, and separation performance of the membranes were characterized by fieldemission scanning electron microscope (FE-SEM), attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy, the nano-indentation/scratch technique, and pervaporation (PV) recovery of bio-butanol, respectively. The formation mechanism for the deposition of the PDMS layer onto the inner surface of the ceramic HF was studied in detail. The optimized inner surface of the PDMS/ceramic HF composite membranes with a thin and defect-free separation layer exhibited a high flux of ~1800 gm-2h-1 and an excellent separation factor of 35–38 for 1 wt% n-butanol/water mixtures at 60 C. The facile coating/cross-flow methodology proposed here shows great potential for fabricating inner-surface polymer-coated HFs that have broad applications including membranes, adsorbents, composite materials, and more.展开更多
This article presented a facile fabrication process for polydimethylsiloxane(PDMS)composite gold nanotris⁃octahedra(Au NTOH)for a flexible SERS sensor with high sensitivity.Specifically,Au NTOH with excellent SERS beh...This article presented a facile fabrication process for polydimethylsiloxane(PDMS)composite gold nanotris⁃octahedra(Au NTOH)for a flexible SERS sensor with high sensitivity.Specifically,Au NTOH with excellent SERS behaviors was synthesized using a seed-mediated growth method and the dimensions of the Au NTOH was easily tuned.In addition,the influence of size on the SERS performance of their monolayers was systematically investigated,and the Au NTOH with the size of 61 nm possessed the best SERS performance.Importantly,a hydrophilic-substrateassisted interfacial self-assembled monolayer transfer technique was proposed to transfer Au NTOH onto PDMS films,resulting in forming flexible and transparent Au NTOH@PDMS substrates.Furthermore,the excellent signal homoge⁃neity of this substrate was demonstrated and the sensitivity was verified by a measurement of crystal violet(CV)as low as 1×10^(-8) mol/L.As a result,this SERS sensor is progressing for applying in the identification of trace contaminants in broad fields.展开更多
基金Contract grant sponsors: Major State Basic Research Projects of China (G1999064800)
文摘Polydimethylsiloxane (PDMS) rubber latex with two sorts of sensitizers, trimethylol propane tri-methacrylate (TMPTMA) and diethylene glycol di-acrylate (DEGDA), was irradiated with γ-rays and electron beams in various conditions. The radiation crosslinking reaction of PDMS occurs in the inner phase of the latex and is relatively isolated from the water phase. Therefore the oxygen and the radicals produced by the radiolysis reaction of water almost have no effect on the crosslinking reaction of polymer. The experimental data correspond with the Charlesby-Pinner relationship in the main. The gelation doses, degree of crosslinking and degradation as well as G values of crosslinking were calculated. From them, the sensitization coefficients were derived to offer a quantitative measurement of the enhancing effect of sensitizer on the radiation crosslinking.
基金the National Natural Science Foundation of China(No.50273035)Anhui Provincial Education Department(No.2004kj362zd)are acknowledged.
文摘A novel hydroxypolyether blocked polydimethylsiloxane, poly（ethylene oxide） propyl-b-polydimethylsiloxane-b-propyl poly（ethylene oxide） （PEO-b-PDMS-b-PEO） was synthesized by simple hydrosilation reaction of poly（ethylene glycol） monoallyl ether with α,ω-dihydrogen terminated PDMS （HPDMS）. Fourier transform infrared spectroscopy （FTIR） and IH NMR were used to identify the structure of PEO-b-PDMS-b-PEO and intermediate product HPDMS. Based on the effect investigations of temperature, reactant molar ratio, catalyst and time on the hydrosilation, it was found that the conversion of Si-H bond to SiC bond increased with the increase of catalyst and time, and the reaction completed when the content of catalyst was 22μg/g and the time was 5 h, respectively. Urethane reaction of OH and NCO group confirms that PEO-b-PDMS-b-PEO is more reactive toward to diisocyanate than α,ω-dihydroxylbutyl terminated PDMS.
文摘Block copolymers with different backbone compositions have been prepared by the condensation of dimethylamino terminated poly（dimethylsiloxane） （PDMS） and hydroquinone terminated poly（phthalazinone ether nitrile） （PPEN） in the presence of chlorobenzcne/N-methyl pyrrolidone （NMP） as solvents. The products were characterized by FTIR, ^1H NMR and gel permeation chromatography. Differential scanning calorimetry analysis indicated that the block copolymers showed separated microphase.
文摘The fabrication of a separation layer on the inner surface of a hollow fiber (HF) substrate to form an HF composite membrane offers exciting opportunities for industrial applications, although challenges remain. This work reports on the fabrication of a polydimethylsiloxane (PDMS) composite membrane on the inner surface of a single-channel or multi-channel ceramic HF via a proposed coating/crossflow approach. The nanostructures and transport properties of the PDMS HF composite membranes were optimized by controlling the polymer concentration and coating time. The morphology, surface chemistry, interfacial adhesion, and separation performance of the membranes were characterized by fieldemission scanning electron microscope (FE-SEM), attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy, the nano-indentation/scratch technique, and pervaporation (PV) recovery of bio-butanol, respectively. The formation mechanism for the deposition of the PDMS layer onto the inner surface of the ceramic HF was studied in detail. The optimized inner surface of the PDMS/ceramic HF composite membranes with a thin and defect-free separation layer exhibited a high flux of ~1800 gm-2h-1 and an excellent separation factor of 35–38 for 1 wt% n-butanol/water mixtures at 60 C. The facile coating/cross-flow methodology proposed here shows great potential for fabricating inner-surface polymer-coated HFs that have broad applications including membranes, adsorbents, composite materials, and more.
基金The National Natural Science Foundation of China(12274055)the Fundamental Research Funds for the Central Universities(04442024072)the Training Program of Innovation and Entrepreneurship for Undergraduates in Dalian Minzu University(202312026063)。
文摘This article presented a facile fabrication process for polydimethylsiloxane(PDMS)composite gold nanotris⁃octahedra(Au NTOH)for a flexible SERS sensor with high sensitivity.Specifically,Au NTOH with excellent SERS behaviors was synthesized using a seed-mediated growth method and the dimensions of the Au NTOH was easily tuned.In addition,the influence of size on the SERS performance of their monolayers was systematically investigated,and the Au NTOH with the size of 61 nm possessed the best SERS performance.Importantly,a hydrophilic-substrateassisted interfacial self-assembled monolayer transfer technique was proposed to transfer Au NTOH onto PDMS films,resulting in forming flexible and transparent Au NTOH@PDMS substrates.Furthermore,the excellent signal homoge⁃neity of this substrate was demonstrated and the sensitivity was verified by a measurement of crystal violet(CV)as low as 1×10^(-8) mol/L.As a result,this SERS sensor is progressing for applying in the identification of trace contaminants in broad fields.
