When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI （Horizontal Transve...When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI （Horizontal Transverse Isotropy） formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other.展开更多
In recent years more and more multi-array logging tools, such as the array induction and the array lateralog, are applied in place of conventional logging tools resulting in increased resolution, better radial and ver...In recent years more and more multi-array logging tools, such as the array induction and the array lateralog, are applied in place of conventional logging tools resulting in increased resolution, better radial and vertical sounding capability and other features. Multi-array logging tools acquire several times more individual measurements than conventional logging tools. In addition to new information contained in these data, there is a certain redundancy among the measurements. The sum of the measurements actually composes a large matrix. Providing the measurements are error-free, the elements of this matrix show certain consistencies. Taking advantage of these consistencies, an innovative method is developed to detect and correct errors in the array resistivity logging tool raw measurements, and evaluate the quality of the data. The method can be described in several steps. First, data consistency patterns are identified based on the physics of the measurements. Second, the measurements are compared against the consistency patterns for error and bad data detection. Third, the erroneous data are eliminated and the measurements are re-constructed according to the consistency patterns. Finally, the data quality is evaluated by comparing the raw measurements with the re-constructed measurements. The method can be applied to all array type logging tools, such as array induction tool and array resistivity tool. This paper describes the method and illustrates its application with the High Definition Lateral Log （HDLL, Baker Atlas） instrument. To demonstrate the efficiency of the method, several field examples are shown and discussed.展开更多
An advanced ceramic cutting tool material Al2O3/TiC/TiN （LTN） is developed by incorporation and dispersion of micro-scale TiC particle and nano-scale TiN particle in alumina matrix. With the optimal dispersing and f...An advanced ceramic cutting tool material Al2O3/TiC/TiN （LTN） is developed by incorporation and dispersion of micro-scale TiC particle and nano-scale TiN particle in alumina matrix. With the optimal dispersing and fabricating technology, this multi-scale and multi-phase nanocomposite ceramic tool material can get both higher flexural strength and fracture toughness than that of A1203/TiC （LZ） ceramic tool material without nano-scale TiN particle, especially the fracture toughness can reach to 7.8 MPa . m^0.5. The nano-scale TiN can lead to the grain fining effect and promote the sintering process to get a higher density. The coexisting transgranular and intergranular fracture mode induced by micro-scale TiC and nano-scale TiN, and the homogeneous and densified microstructure can result in a remarkable strengthening and toughening effect. The cutting performance and wear mechanisms of the advanced multi-scale and multi-phase nanocomposite ceramic cutting tool are researched.展开更多
Global forest cover is undergoing significant transformations due to anthropogenic activities and natural disturbances,profoundly impacting hydrological processes.However,the inherent spatial heterogeneity within wate...Global forest cover is undergoing significant transformations due to anthropogenic activities and natural disturbances,profoundly impacting hydrological processes.However,the inherent spatial heterogeneity within watersheds leads to varied hydrological responses across spatiotemporal scales,challenging comprehensive assessment of logging impacts at the watershed scale.Here,we developed multiple forest logging scenarios using the soil and water assessment tool(SWAT)model for the Le'an River watershed,a 5,837 km2 subtropical watershed in China,to quantify the hydrological effects of forest logging across different spatiotemporal scales.Our results demonstrate that increasing forest logging ratios from 1.54% to 9.25% consistently enhanced ecohydrological sensitivity.However,sensitivity varied across spatiotemporal scales,with the rainy season(15.30%-15.81%)showing higher sensitivity than annual(11.56%-12.07%)and dry season(3.38%-5.57%)periods.Additionally,the ecohydrological sensitivity of logging varied significantly across the watershed,with midstream areas exhibiting the highest sensitivity(13.13%-13.25%),followed by downstream(11.87%-11.98%)and upstream regions(9.96%-10.05%).Furthermore,the whole watershed exhibited greater hydrological resilience to logging compared to upstream areas,with attenuated runoff changes due to scale effects.Scale effects were more pronounced during dry seasons((-8.13 to -42.13)×10^(4) m^(3)·month^(-1))than in the rainy season((-11.11 to -26.65)×10^(4) m^(3)·month^(-1)).These findings advance understanding of logging impacts on hydrology across different spatiotemporal scales in subtropical regions,providing valuable insights for forest management under increasing anthropogenic activities and climate change.展开更多
This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test eq...This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 （advanced reduced instruction set computing （RISC） machine） technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels.展开更多
On the Gamma ray reception study, this paper presents the heavy metal shielding method, which is using C type heavy metal to shield Sodium iodide scintillation crystal. By rotating the drilling tools to scan and detec...On the Gamma ray reception study, this paper presents the heavy metal shielding method, which is using C type heavy metal to shield Sodium iodide scintillation crystal. By rotating the drilling tools to scan and detect the gamma ray which are around the borehole wall formation, On study of angle measurement study, base on accelerometers and fluxgate sensors to design the algorithm which can confirm the detecting instrument measurement window position;Moreover, the paper also presents the Rock formation identification method, which is using changing tendency and sequencing of high side and low side gamma to decide the position of the drilling tool. Field experiments showed that the tool can effectively identify the reservoir and rock formation.展开更多
The distributions of local velocity and local phase holdup along the radial direction of pipes are complicated because of gravity differentiation,and the distribution of fluid velocity fi eld changes along the gravity...The distributions of local velocity and local phase holdup along the radial direction of pipes are complicated because of gravity differentiation,and the distribution of fluid velocity fi eld changes along the gravity direction in horizontal wells.Therefore,measuring the mixture flow and water holdup is difficult,resulting in poor interpretation accuracy of the production logging output profile.In this paper,oil–water two-phase flow dynamic simulation logging experiments in horizontal oil–water two-phase fl ow simulation wells were conducted using the Multiple Array Production Suite,which comprises a capacitance array tool(CAT)and a spinner array tool(SAT),and then the response characteristics of SAT and CAT in diff erent fl ow rates and water cut production conditions were studied.According to the response characteristics of CAT in diff erent water holdup ranges,interpolation imaging along the wellbore section determines the water holdup distribution,and then,the oil–water two-phase velocity fi eld in the fl ow section was reconstructed on the basis of the fl ow section water holdup distribution and the logging value of SAT and combined with the rheological equation of viscous fl uid,and the calculation method of the oil–water partial phase fl ow rate in the fl ow section was proposed.This new approach was applied in the experiment data calculations,and the results are basically consistent with the experimental data.The total fl ow rate and water holdup from the calculation are in agreement with the set values in the experiment,suggesting that the method has high accuracy.展开更多
In order to clarify the influence of the instrument’s own drag on the temperature distribution in the horizontal gas wellbore in temperature logging.By constructing an indoor gas-liquid two-phase horizontal tube flow...In order to clarify the influence of the instrument’s own drag on the temperature distribution in the horizontal gas wellbore in temperature logging.By constructing an indoor gas-liquid two-phase horizontal tube flow platform,the effects of the drag speed of the instrument on the temperature distribution in the wellbore were studied in the single-phase gas and gas-liquid two phases.In addition,during the process of instrument dragging,the influence of different perforation cluster opening methods and wellbore inclination on temperature distribution was also studied.The results show that the temperature fluctuation is reduced at higher drag speeds;Under a certain flow rate,the smaller the number of openings,the greater the influence of the instrument dragging inside the tube on the temperature distribution inside the tube;When the inclination angle is−5°,the drag of the instrument in the tube interferes greatly with the temperature distribution.When the inclination angle is 5°,the drag of the instrument in the tube has less interference with the temperature distribution.This study provides more reference for the future temperature calculation model of horizontal wellbore and has important research significance.展开更多
Shielding materials are critical for downhole pulsed neutron tool design because they directly influence the accuracy of formation measurements.A well-designed shield configuration ensures that the response of the too...Shielding materials are critical for downhole pulsed neutron tool design because they directly influence the accuracy of formation measurements.A well-designed shield configuration ensures that the response of the tool is maximally representative of the formation without being affected by the tool and borehole environment.This study investigated the effects of boron-containing materials on neutron and gamma detectors based on a newly designed logging-while-drilling tool that is currently undergoing manufacturing.As the boron content increased,the ability to absorb thermal neutrons increased significantly.Through simulation,it was proven that boron carbide(B_(4)C)can be used as an effective boron shielding material for thermal neutrons,and is therefore employed in this work.To shield against thermal neutrons migrating from the mud pipes,the optimal shielding thicknesses for the near-and far-neutron detectors were determined to be 5 and 4 mm.At a porosity of 25 p.u.,near-neutron sensitivity exhibited a 5.6%increase.Furthermore,to shield the capture gamma generated by thermal neutrons once they enter the tool from the mud pipe and formation,internal and external shields for the gamma detector were evaluated.The results show that the internal shield requires a boron content of 75%,whereas the external shield has a thickness of 14.2 mm thickness and a boron content of 25%to minimize the tool effect.展开更多
文摘When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI （Horizontal Transverse Isotropy） formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other.
基金The authors would like to thank Dr. Jiaqi Xiao in Halliburton for his assistance and discussions.
文摘In recent years more and more multi-array logging tools, such as the array induction and the array lateralog, are applied in place of conventional logging tools resulting in increased resolution, better radial and vertical sounding capability and other features. Multi-array logging tools acquire several times more individual measurements than conventional logging tools. In addition to new information contained in these data, there is a certain redundancy among the measurements. The sum of the measurements actually composes a large matrix. Providing the measurements are error-free, the elements of this matrix show certain consistencies. Taking advantage of these consistencies, an innovative method is developed to detect and correct errors in the array resistivity logging tool raw measurements, and evaluate the quality of the data. The method can be described in several steps. First, data consistency patterns are identified based on the physics of the measurements. Second, the measurements are compared against the consistency patterns for error and bad data detection. Third, the erroneous data are eliminated and the measurements are re-constructed according to the consistency patterns. Finally, the data quality is evaluated by comparing the raw measurements with the re-constructed measurements. The method can be applied to all array type logging tools, such as array induction tool and array resistivity tool. This paper describes the method and illustrates its application with the High Definition Lateral Log （HDLL, Baker Atlas） instrument. To demonstrate the efficiency of the method, several field examples are shown and discussed.
基金Selected from Proceedings of the 7th International Conference on Frontiers of DesignManufacturing(ICFDM'2006)This project is supported by National Natural Science Foundation of China(No.50275086)the University of New South Wales Visiting Professorship Scheme,Australia.
文摘An advanced ceramic cutting tool material Al2O3/TiC/TiN （LTN） is developed by incorporation and dispersion of micro-scale TiC particle and nano-scale TiN particle in alumina matrix. With the optimal dispersing and fabricating technology, this multi-scale and multi-phase nanocomposite ceramic tool material can get both higher flexural strength and fracture toughness than that of A1203/TiC （LZ） ceramic tool material without nano-scale TiN particle, especially the fracture toughness can reach to 7.8 MPa . m^0.5. The nano-scale TiN can lead to the grain fining effect and promote the sintering process to get a higher density. The coexisting transgranular and intergranular fracture mode induced by micro-scale TiC and nano-scale TiN, and the homogeneous and densified microstructure can result in a remarkable strengthening and toughening effect. The cutting performance and wear mechanisms of the advanced multi-scale and multi-phase nanocomposite ceramic cutting tool are researched.
基金supported by the National Natural Science Foundation of China(No.31660234).
文摘Global forest cover is undergoing significant transformations due to anthropogenic activities and natural disturbances,profoundly impacting hydrological processes.However,the inherent spatial heterogeneity within watersheds leads to varied hydrological responses across spatiotemporal scales,challenging comprehensive assessment of logging impacts at the watershed scale.Here,we developed multiple forest logging scenarios using the soil and water assessment tool(SWAT)model for the Le'an River watershed,a 5,837 km2 subtropical watershed in China,to quantify the hydrological effects of forest logging across different spatiotemporal scales.Our results demonstrate that increasing forest logging ratios from 1.54% to 9.25% consistently enhanced ecohydrological sensitivity.However,sensitivity varied across spatiotemporal scales,with the rainy season(15.30%-15.81%)showing higher sensitivity than annual(11.56%-12.07%)and dry season(3.38%-5.57%)periods.Additionally,the ecohydrological sensitivity of logging varied significantly across the watershed,with midstream areas exhibiting the highest sensitivity(13.13%-13.25%),followed by downstream(11.87%-11.98%)and upstream regions(9.96%-10.05%).Furthermore,the whole watershed exhibited greater hydrological resilience to logging compared to upstream areas,with attenuated runoff changes due to scale effects.Scale effects were more pronounced during dry seasons((-8.13 to -42.13)×10^(4) m^(3)·month^(-1))than in the rainy season((-11.11 to -26.65)×10^(4) m^(3)·month^(-1)).These findings advance understanding of logging impacts on hydrology across different spatiotemporal scales in subtropical regions,providing valuable insights for forest management under increasing anthropogenic activities and climate change.
基金supported by National Science Foundation of China (61102102, 11134011, 11204380 and 11374371)Major National Science and Technology Projects (2011ZX05020-002)+2 种基金PetroChina Innovation Foundation (2014D-5006-0307)Science and Technology Project of CNPC (2014A-3912 and 2011B-4001)the Foundation of China University of Petroleum (KYJJ2012-05-07)
文摘This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 （advanced reduced instruction set computing （RISC） machine） technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels.
文摘On the Gamma ray reception study, this paper presents the heavy metal shielding method, which is using C type heavy metal to shield Sodium iodide scintillation crystal. By rotating the drilling tools to scan and detect the gamma ray which are around the borehole wall formation, On study of angle measurement study, base on accelerometers and fluxgate sensors to design the algorithm which can confirm the detecting instrument measurement window position;Moreover, the paper also presents the Rock formation identification method, which is using changing tendency and sequencing of high side and low side gamma to decide the position of the drilling tool. Field experiments showed that the tool can effectively identify the reservoir and rock formation.
基金supported by National Natural Science Foundation of China(41474115,42174155)Open Fund of Key Laboratory of Exploration Technologies for Oil and Gas Resources(Yangtze University)Ministry of Education of China(No K2018-02)。
文摘The distributions of local velocity and local phase holdup along the radial direction of pipes are complicated because of gravity differentiation,and the distribution of fluid velocity fi eld changes along the gravity direction in horizontal wells.Therefore,measuring the mixture flow and water holdup is difficult,resulting in poor interpretation accuracy of the production logging output profile.In this paper,oil–water two-phase flow dynamic simulation logging experiments in horizontal oil–water two-phase fl ow simulation wells were conducted using the Multiple Array Production Suite,which comprises a capacitance array tool(CAT)and a spinner array tool(SAT),and then the response characteristics of SAT and CAT in diff erent fl ow rates and water cut production conditions were studied.According to the response characteristics of CAT in diff erent water holdup ranges,interpolation imaging along the wellbore section determines the water holdup distribution,and then,the oil–water two-phase velocity fi eld in the fl ow section was reconstructed on the basis of the fl ow section water holdup distribution and the logging value of SAT and combined with the rheological equation of viscous fl uid,and the calculation method of the oil–water partial phase fl ow rate in the fl ow section was proposed.This new approach was applied in the experiment data calculations,and the results are basically consistent with the experimental data.The total fl ow rate and water holdup from the calculation are in agreement with the set values in the experiment,suggesting that the method has high accuracy.
基金supported by the Foundation of the Educational Commission of Hubei Province of China[grant numbers No.Q20191310]the National Natural Science Fund Project[grant number 61572084].
文摘In order to clarify the influence of the instrument’s own drag on the temperature distribution in the horizontal gas wellbore in temperature logging.By constructing an indoor gas-liquid two-phase horizontal tube flow platform,the effects of the drag speed of the instrument on the temperature distribution in the wellbore were studied in the single-phase gas and gas-liquid two phases.In addition,during the process of instrument dragging,the influence of different perforation cluster opening methods and wellbore inclination on temperature distribution was also studied.The results show that the temperature fluctuation is reduced at higher drag speeds;Under a certain flow rate,the smaller the number of openings,the greater the influence of the instrument dragging inside the tube on the temperature distribution inside the tube;When the inclination angle is−5°,the drag of the instrument in the tube interferes greatly with the temperature distribution.When the inclination angle is 5°,the drag of the instrument in the tube has less interference with the temperature distribution.This study provides more reference for the future temperature calculation model of horizontal wellbore and has important research significance.
基金supported by the Natural Science Foundation of China(Nos.U23B20151 and 52171253).
文摘Shielding materials are critical for downhole pulsed neutron tool design because they directly influence the accuracy of formation measurements.A well-designed shield configuration ensures that the response of the tool is maximally representative of the formation without being affected by the tool and borehole environment.This study investigated the effects of boron-containing materials on neutron and gamma detectors based on a newly designed logging-while-drilling tool that is currently undergoing manufacturing.As the boron content increased,the ability to absorb thermal neutrons increased significantly.Through simulation,it was proven that boron carbide(B_(4)C)can be used as an effective boron shielding material for thermal neutrons,and is therefore employed in this work.To shield against thermal neutrons migrating from the mud pipes,the optimal shielding thicknesses for the near-and far-neutron detectors were determined to be 5 and 4 mm.At a porosity of 25 p.u.,near-neutron sensitivity exhibited a 5.6%increase.Furthermore,to shield the capture gamma generated by thermal neutrons once they enter the tool from the mud pipe and formation,internal and external shields for the gamma detector were evaluated.The results show that the internal shield requires a boron content of 75%,whereas the external shield has a thickness of 14.2 mm thickness and a boron content of 25%to minimize the tool effect.
