Based on a stochastic wire length distributed model, the interconnect distribution of a three-dimensional integrated circuit （3D IC） is predicted exactly. Using the results of this model, a global interconnect desig...Based on a stochastic wire length distributed model, the interconnect distribution of a three-dimensional integrated circuit （3D IC） is predicted exactly. Using the results of this model, a global interconnect design window for a giga-scale system-on-chip （SOC） is established by evaluating the constraints of 1） wiring resource, 2） wiring bandwidth, and 3） wiring noise. In comparison to a two-dimensional integrated circuit （2D IC） in a 130-nm and 45-nm technology node, the design window expands for a 3D IC to improve the design reliability and system performance, further supporting 3D IC application in future integrated circuit design.展开更多
The doors and windows are the throat of the building. This paper discusses the fundamental role of the doors and windows of the building, and the dominant roles such as spatial organization and control of light, and t...The doors and windows are the throat of the building. This paper discusses the fundamental role of the doors and windows of the building, and the dominant roles such as spatial organization and control of light, and to study the recessive function of windows and doors from aspects of the psychological impact, cultural significance and decoration. After exploring the characteristics of modem windows and doors, it studies the design elements of modem windows and doors and summed up the features that the initiative to make use of the environment. Basic from three levels as the basic form of design; windows and buildings, and the social and natural environment of the unified design; doors and windows to take the initiative to study the nature.展开更多
Promoting the development of deep-sea mineral exploration instrumentation can help alleviate the global resource shortage faced by mankind.X-ray fluorescence(XRF)spectrometry has been widely used in the in situ analys...Promoting the development of deep-sea mineral exploration instrumentation can help alleviate the global resource shortage faced by mankind.X-ray fluorescence(XRF)spectrometry has been widely used in the in situ analysis of deep-sea minerals owing to its fast analytical speed,nondestructive nature,and wide analytical range.This study focused on the structural safety and detection efficiency of X-ray fluorescence in situ measurement equipment under high pressure for deep-sea XRF analysis.This study first combined finite element analysis and experiments to design and optimize the structure of an X-ray probe tube required for deep-sea mineral exploration and to determine the Be window thickness to ensure stress safety.Subsequently,the Monte Carlo method was used to analyze and optimize the Be window thickness on the X-ray probe tube to improve the accuracy of the elemental analyses.Finally,the effect of seawater thickness between the transmitter outer tube and rock wall was also considered.The results show that based on ocean depth in different detection environments,Be windows with a thickness of 1.5 mm or 2.0 mm can be selected to improve the detection efficiency of the device while ensuring the structural safety of the instrument.According to the design features and detection requirements of the device,in deep-sea exploration of minerals with characteristic peak energies below 10 keV,the transmitter outer tube should be as close as possible to the rock wall inside the logging.When the characteristic peak energy of the minerals is more than 10 keV,the distance between the transmitter outer tube and rock wall inside the logging should be controlled to approximately 2 mm.This study provides feasible solutions for future deep-sea mineral resource development and a useful reference for elemental analysis of minerals in the deep-sea or other extreme working environments.展开更多
This paper proposes 2.5-dimensional polymer micromachined insect-mimetic wings based on a fluid-structure interaction(FSI)design concept that enables natural deformations like cambering and pitching under fluid forces...This paper proposes 2.5-dimensional polymer micromachined insect-mimetic wings based on a fluid-structure interaction(FSI)design concept that enables natural deformations like cambering and pitching under fluid forces.Instead of directly employing an analysis for the FSI,an iterative structural Design Window(DW)search is used to reduce the computational cost significantly.A DW search using the iterative method refines the initial design by addressing fabrication challenges and tuning it to meet manufacturability constraints.The successful fabrication and demonstration of the final design solution for a wing demonstrates the effectiveness of the iterative DW search based on the FSI design concept.Furthermore,a pixel model is introduced to convert an unstructured to a structured mesh for the FSI analysis to further reduce the computational cost.The camber and pitching error between the unstructured and structured meshes is minimized to achieve insect-like aerodynamic performance by adjusting the elastic moduli of center and root veins.Finally,an analysis for the FSI is conducted,based on the parameters obtained from the pixel model to evaluate the flight performance on the basis of the lift,camber,and pitching required by an actual insect to maneuver and hover.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 60725415 and 60676009)the Natural Science and Technology Major Project of the Ministry of Science and Technology of China (Grant No. 2009ZX01034-002-001-005)
文摘Based on a stochastic wire length distributed model, the interconnect distribution of a three-dimensional integrated circuit （3D IC） is predicted exactly. Using the results of this model, a global interconnect design window for a giga-scale system-on-chip （SOC） is established by evaluating the constraints of 1） wiring resource, 2） wiring bandwidth, and 3） wiring noise. In comparison to a two-dimensional integrated circuit （2D IC） in a 130-nm and 45-nm technology node, the design window expands for a 3D IC to improve the design reliability and system performance, further supporting 3D IC application in future integrated circuit design.
文摘The doors and windows are the throat of the building. This paper discusses the fundamental role of the doors and windows of the building, and the dominant roles such as spatial organization and control of light, and to study the recessive function of windows and doors from aspects of the psychological impact, cultural significance and decoration. After exploring the characteristics of modem windows and doors, it studies the design elements of modem windows and doors and summed up the features that the initiative to make use of the environment. Basic from three levels as the basic form of design; windows and buildings, and the social and natural environment of the unified design; doors and windows to take the initiative to study the nature.
基金supported by the National Major Scientific Research Instrument Development Projects(No.42127807)the National Natural Science Foundation of China(No.12105030)。
文摘Promoting the development of deep-sea mineral exploration instrumentation can help alleviate the global resource shortage faced by mankind.X-ray fluorescence(XRF)spectrometry has been widely used in the in situ analysis of deep-sea minerals owing to its fast analytical speed,nondestructive nature,and wide analytical range.This study focused on the structural safety and detection efficiency of X-ray fluorescence in situ measurement equipment under high pressure for deep-sea XRF analysis.This study first combined finite element analysis and experiments to design and optimize the structure of an X-ray probe tube required for deep-sea mineral exploration and to determine the Be window thickness to ensure stress safety.Subsequently,the Monte Carlo method was used to analyze and optimize the Be window thickness on the X-ray probe tube to improve the accuracy of the elemental analyses.Finally,the effect of seawater thickness between the transmitter outer tube and rock wall was also considered.The results show that based on ocean depth in different detection environments,Be windows with a thickness of 1.5 mm or 2.0 mm can be selected to improve the detection efficiency of the device while ensuring the structural safety of the instrument.According to the design features and detection requirements of the device,in deep-sea exploration of minerals with characteristic peak energies below 10 keV,the transmitter outer tube should be as close as possible to the rock wall inside the logging.When the characteristic peak energy of the minerals is more than 10 keV,the distance between the transmitter outer tube and rock wall inside the logging should be controlled to approximately 2 mm.This study provides feasible solutions for future deep-sea mineral resource development and a useful reference for elemental analysis of minerals in the deep-sea or other extreme working environments.
基金supported by the Japan Society for the Promotion of Science KAKENHI under grant number 23H00475.
文摘This paper proposes 2.5-dimensional polymer micromachined insect-mimetic wings based on a fluid-structure interaction(FSI)design concept that enables natural deformations like cambering and pitching under fluid forces.Instead of directly employing an analysis for the FSI,an iterative structural Design Window(DW)search is used to reduce the computational cost significantly.A DW search using the iterative method refines the initial design by addressing fabrication challenges and tuning it to meet manufacturability constraints.The successful fabrication and demonstration of the final design solution for a wing demonstrates the effectiveness of the iterative DW search based on the FSI design concept.Furthermore,a pixel model is introduced to convert an unstructured to a structured mesh for the FSI analysis to further reduce the computational cost.The camber and pitching error between the unstructured and structured meshes is minimized to achieve insect-like aerodynamic performance by adjusting the elastic moduli of center and root veins.Finally,an analysis for the FSI is conducted,based on the parameters obtained from the pixel model to evaluate the flight performance on the basis of the lift,camber,and pitching required by an actual insect to maneuver and hover.
