Dear Editor,This letter presents a new secure hierarchical control strategy for steering tracking of in-wheel motor driven(IWMD)electric vehicle(EV)subject to limited network resources,hybrid cyber-attacks,model nonli...Dear Editor,This letter presents a new secure hierarchical control strategy for steering tracking of in-wheel motor driven(IWMD)electric vehicle(EV)subject to limited network resources,hybrid cyber-attacks,model nonlinearities,actuator redundancy and airflow disturbance.A hierarchical control architecture is proposed specifically for solving the problems of nonlinear system modeling and actuator redundancy.By utilizing the advantages of fully actuated system(FAS)approach,a nonlinear virtual controller against airflow disturbance is constructed in upper layer system and an event-triggered nonlinear distributed controller is proposed in lower layer system under stochastic hybrid cyber-attacks.A case study of overtaking task is carried out to validate the FAS-based hierarchical control strategy.展开更多
This paper addresses the co-design problem of decentralized dynamic event-triggered communication and active suspension control for an in-wheel motor driven electric vehicle equipped with a dynamic damper. The main ob...This paper addresses the co-design problem of decentralized dynamic event-triggered communication and active suspension control for an in-wheel motor driven electric vehicle equipped with a dynamic damper. The main objective is to simultaneously improve the desired suspension performance caused by various road disturbances and alleviate the network resource utilization for the concerned in-vehicle networked suspension system. First, a T-S fuzzy active suspension model of an electric vehicle under dynamic damping is established. Second,a novel decentralized dynamic event-triggered communication mechanism is developed to regulate each sensor's data transmissions such that sampled data packets on each sensor are scheduled in an independent manner. In contrast to the traditional static triggering mechanisms, a key feature of the proposed mechanism is that the threshold parameter in the event trigger is adjusted adaptively over time to reduce the network resources occupancy. Third, co-design criteria for the desired event-triggered fuzzy controller and dynamic triggering mechanisms are derived. Finally, comprehensive comparative simulation studies of a 3-degrees-of-freedom quarter suspension model are provided under both bump road disturbance and ISO-2631 classified random road disturbance to validate the effectiveness of the proposed co-design approach. It is shown that ride comfort can be greatly improved in either road disturbance case and the suspension deflection, dynamic tyre load and actuator control input are all kept below the prescribed maximum allowable limits, while simultaneously maintaining desirable communication efficiency.展开更多
One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode bas...One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode based on direct yaw moment control for enhancing vehicle steering ability in complex environ ments.The control system is designed as a hierarchical structure,with a yaw moment decision layer and a driving force distribution layer.In the higher-level layer,the objective optimization function is con-structed to obtain the slip steering ratio,which represents the degree of vehicle slip steering in the dual-steering mode.Ayaw moment controller using active disturbance rejection control theory is designed for continuous yaw rate control.When the actual yaw rate of the vehicle deviates from the reference yaw rate obtained by the vehicle reference model and the slip steering ratio,the yaw moment controller isactuated to determine the yaw moment demand for vehicle steering.In the lower-level layer,there is a torque distribution controller based on distribution rules,which meets the requirement of yaw moment demand without affecting the total longitudinal driving force of the vehicle.For verifying the validity and feasibility of the dual-steering mode,simulations were conducted on the hardware-in-loop real-time simulation platfomm.Additionally,corresponding real vehicle tests were carried out on an eight-wheel prototype vehicle.Test results were generally consistent with the simulation results,thereby demon-strating that the proposed dual-steering mode reduces steering radius and enhances the steering per-formance of the vehicle.展开更多
Blank holder force (BHF) control is used to prevent wrinkles of sheet metal in deep drawing process. Based on a novel conception of BHF control technique driven by servo-motor, a new BHF device with six-bar linkage me...Blank holder force (BHF) control is used to prevent wrinkles of sheet metal in deep drawing process. Based on a novel conception of BHF control technique driven by servo-motor, a new BHF device with six-bar linkage mechanism has been designed and manufactured. Whole control system of the new BHF technique was developed, and the basic structure of the hardware configuration of the system was given. Software analysis, implementation and division of the functional modules have been done. Also, the control software in data acquisition and processing module has been developed in the relevant technology of the BHF control system for the requirements of real-time, stability and accuracy. By the new BHF device combined with the hardware and the software system, the BHF can be regulated accurately variation with the predefined BHF profile in deep drawing process.展开更多
针对轮毂电机驱动汽车(hub motor driven vehicle,HMDV)因开关磁阻电机自重和电机气隙偏心导致产生的垂向振动负效应严重恶化车辆的平顺性和操稳性的问题,提出一种基于分数阶滑模控制的HMDV可控动惯性悬架优化设计方法。首先,在轮毂驱...针对轮毂电机驱动汽车(hub motor driven vehicle,HMDV)因开关磁阻电机自重和电机气隙偏心导致产生的垂向振动负效应严重恶化车辆的平顺性和操稳性的问题,提出一种基于分数阶滑模控制的HMDV可控动惯性悬架优化设计方法。首先,在轮毂驱动电机气隙偏心产生的不平衡径向力基础上,建立HMDV 1/4混棚动惯性悬架,理论证明二阶混棚正实网络的优异性能;其次,采用HMDV二阶混棚正实网络作为参考模型,构建基于分数阶滑模控制理论的HMDV协调控制系统,在随机路面下进行平顺性仿真和分析;最后,进行HMDV 1/4悬架台架试验。试验结果表明,HMDV可控动惯性悬架与HMDV传统被动悬架相比,车身加速度均方根值、悬架动行程均方根值以及轮胎动载荷均方根值最大降幅分别为7.72%、30.64%以及11.54%。验证了所设计的HMDV可控动惯性悬架对于由开关磁阻电机造成的垂向振动负效应有优异的抑制性能。展开更多
基金supported by the National Natural Science Foundation of China(62173209,61773238)the Science Center Program of National Natural Science Foundation of China(62188101).
文摘Dear Editor,This letter presents a new secure hierarchical control strategy for steering tracking of in-wheel motor driven(IWMD)electric vehicle(EV)subject to limited network resources,hybrid cyber-attacks,model nonlinearities,actuator redundancy and airflow disturbance.A hierarchical control architecture is proposed specifically for solving the problems of nonlinear system modeling and actuator redundancy.By utilizing the advantages of fully actuated system(FAS)approach,a nonlinear virtual controller against airflow disturbance is constructed in upper layer system and an event-triggered nonlinear distributed controller is proposed in lower layer system under stochastic hybrid cyber-attacks.A case study of overtaking task is carried out to validate the FAS-based hierarchical control strategy.
文摘This paper addresses the co-design problem of decentralized dynamic event-triggered communication and active suspension control for an in-wheel motor driven electric vehicle equipped with a dynamic damper. The main objective is to simultaneously improve the desired suspension performance caused by various road disturbances and alleviate the network resource utilization for the concerned in-vehicle networked suspension system. First, a T-S fuzzy active suspension model of an electric vehicle under dynamic damping is established. Second,a novel decentralized dynamic event-triggered communication mechanism is developed to regulate each sensor's data transmissions such that sampled data packets on each sensor are scheduled in an independent manner. In contrast to the traditional static triggering mechanisms, a key feature of the proposed mechanism is that the threshold parameter in the event trigger is adjusted adaptively over time to reduce the network resources occupancy. Third, co-design criteria for the desired event-triggered fuzzy controller and dynamic triggering mechanisms are derived. Finally, comprehensive comparative simulation studies of a 3-degrees-of-freedom quarter suspension model are provided under both bump road disturbance and ISO-2631 classified random road disturbance to validate the effectiveness of the proposed co-design approach. It is shown that ride comfort can be greatly improved in either road disturbance case and the suspension deflection, dynamic tyre load and actuator control input are all kept below the prescribed maximum allowable limits, while simultaneously maintaining desirable communication efficiency.
基金This work was supported by the Weapons and Equipment Pre-Research Project of China(No.301051102).
文摘One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process.This paper proposes a dual-steering mode based on direct yaw moment control for enhancing vehicle steering ability in complex environ ments.The control system is designed as a hierarchical structure,with a yaw moment decision layer and a driving force distribution layer.In the higher-level layer,the objective optimization function is con-structed to obtain the slip steering ratio,which represents the degree of vehicle slip steering in the dual-steering mode.Ayaw moment controller using active disturbance rejection control theory is designed for continuous yaw rate control.When the actual yaw rate of the vehicle deviates from the reference yaw rate obtained by the vehicle reference model and the slip steering ratio,the yaw moment controller isactuated to determine the yaw moment demand for vehicle steering.In the lower-level layer,there is a torque distribution controller based on distribution rules,which meets the requirement of yaw moment demand without affecting the total longitudinal driving force of the vehicle.For verifying the validity and feasibility of the dual-steering mode,simulations were conducted on the hardware-in-loop real-time simulation platfomm.Additionally,corresponding real vehicle tests were carried out on an eight-wheel prototype vehicle.Test results were generally consistent with the simulation results,thereby demon-strating that the proposed dual-steering mode reduces steering radius and enhances the steering per-formance of the vehicle.
文摘Blank holder force (BHF) control is used to prevent wrinkles of sheet metal in deep drawing process. Based on a novel conception of BHF control technique driven by servo-motor, a new BHF device with six-bar linkage mechanism has been designed and manufactured. Whole control system of the new BHF technique was developed, and the basic structure of the hardware configuration of the system was given. Software analysis, implementation and division of the functional modules have been done. Also, the control software in data acquisition and processing module has been developed in the relevant technology of the BHF control system for the requirements of real-time, stability and accuracy. By the new BHF device combined with the hardware and the software system, the BHF can be regulated accurately variation with the predefined BHF profile in deep drawing process.
