We present the novel system of molecular distributed sensors using dark soliton pulse array, whereas the multi dark soliton sources can be generated and the molecular distributed sensors presented via an optical multi...We present the novel system of molecular distributed sensors using dark soliton pulse array, whereas the multi dark soliton sources can be generated and the molecular distributed sensors presented via an optical multiplexer (MUX). Initially, the dark soliton array with different center wavelengths can be generated, then the transmission molecules/atoms can be secured by using the dark soliton behaviors, whereas the dark soliton valley can be configured as the molecule/atom trapping potential well, which can be used to trap molecule/atom. In this case, the transported molecules/atoms in the router can be used to form the molecular distributed sensors, whereas the induced changes in the molecular distributed sensors can be formed and measured via the drop port of each output multiplexer.展开更多
Aflatoxin B1(AFB1)is a highly toxic mycotoxin,and rapid and sensitive detection of AFB1 is in demand for food safety and environmental analysis.Here we described a simple aptamer molecular beacon assay for rapid detec...Aflatoxin B1(AFB1)is a highly toxic mycotoxin,and rapid and sensitive detection of AFB1 is in demand for food safety and environmental analysis.Here we described a simple aptamer molecular beacon assay for rapid detection of aflatoxin B1(AFB1)by using an aptamer with a fluorescein(FAM)label at the 50 end and a fluorescence quencher(black hole quencher 1,BHQ1)at the 30 end.In the presence of AFB1,the aptamer probe bound with AFB1 and induced a hairpin structure,drawing FAM and BHQ1 into close proximity and leading to fluorescence quenching.This assay allowed for a detection limit of 3.9 nmol/L and a dynamic range from 3.9 nmol/L to 4 mmol/L.Specificity test showed other mycotoxins including ochratoxin A,ochratoxin B,fumonisin B1,fumonisin B2,and zearalenone had negligible influence on detection of AFB1.AFB1 spiked in diluted liquor wine,methanol,or corn flour samples was successfully detected by using this aptamer probe,and the assay showed potential for real sample analysis.展开更多
A sensitive, fast and low-cost molecular imprinted polymeric sensor for quantitative determination of parathion was prepared with chitosan（CS） as function matrix and parathion（PT） as template molecule via constant...A sensitive, fast and low-cost molecular imprinted polymeric sensor for quantitative determination of parathion was prepared with chitosan（CS） as function matrix and parathion（PT） as template molecule via constant potential electrochemical deposition. Sensitive response was obtained with a detection limit of 1.0× 10-7 mol/L and an excellent recognition for PT was achieved due to the good memory capacity of the sensor. The developed sensor exhibited good fabrication reproducibility and acceptable stability, which provided a new promising tool for pesticide analysis.展开更多
The sensitivity and selectivity to H_2 of a new In_2O_3-based gas sensor were improvedsignificantly by surface chemical modification. A dense layer of SiO_2 near the surface of the porousIn_2O_3 bead was formed by che...The sensitivity and selectivity to H_2 of a new In_2O_3-based gas sensor were improvedsignificantly by surface chemical modification. A dense layer of SiO_2 near the surface of the porousIn_2O_3 bead was formed by chemical vapor deposition(CVD)of diethoxydimethysilane(DEMS).The dense layer functioned as a molecular sieve, thereby the diffusion of gases with large moleculardiameters,except for H_2, was effectively controlled, resulting in a prominent selectivity and highsensitivity for H_2. The working mechanism of the sensor was also presented.展开更多
Methacrylic acid with isoproturon has been utilized to prepare molecularly imprinted polymeric (MIP) membrane on Whatman filter paper no. 5 for selective electrochemical estimation of isoproturon pesticide. MIP membra...Methacrylic acid with isoproturon has been utilized to prepare molecularly imprinted polymeric (MIP) membrane on Whatman filter paper no. 5 for selective electrochemical estimation of isoproturon pesticide. MIP membrane was prepared by radical polymerization and characterized using Ultra Violet spectrophotometer, Fourier Transform Infra Red (FTIR) spectroscopy and Scanning Electron Microscopy (SEM). Contact angle study was used to determine the surface energy of the MIP membrane and electrical conductivity measurements were performed by applying a small-amplitude alternating voltage (20 mV) with frequencies varying from 20 Hz to 80 kHz generated by a low-frequency wave form generator. Different isoproturon concentrations in samples were tested and analyzed. Results indicate linear increase in membrane resistance with increasing isoproturon in 10-3 to 10-6 M range. The selectivity of the electrochemical sensor was confirmed by testing isoproturon in presence of the structurally related compounds monouran and diuran. Results reveal highly selective and sensitive sensor, which can be employed for regular estimation of isoproturon in fields.展开更多
The molecularly imprinted technology and the self-assembly technique were used together on the calixarene surface acoustic wave (SAW) chemical sensors to detect organophosphorus compounds. 25-(thioalkyl-alkoxy)-p-tert...The molecularly imprinted technology and the self-assembly technique were used together on the calixarene surface acoustic wave (SAW) chemical sensors to detect organophosphorus compounds. 25-(thioalkyl-alkoxy)-p-tertbutylcalix[4] arene with self-assembled monolayer character was the sensitive coating of the sensors. The sensors had a special response to organophosphorus compounds and the response frequency shift of this sensor to organophosphorus compounds in 0.1 mg/m3 was 350 Hz. The response frequency increased linearly with the increase of the concentration of DMMP in the range from 0.1 to 0.6 mg/m3. The possible explanation of the interaction between the coatings and organophosphorus compounds was discussed.展开更多
The single thiolated arylethynylene molecule with 9,10-dihydroanthracene core（denoted as TADHA） possesses pronounced negative differential conductance（NDC） behavior at lower bias regime. The adsorption effects of ...The single thiolated arylethynylene molecule with 9,10-dihydroanthracene core（denoted as TADHA） possesses pronounced negative differential conductance（NDC） behavior at lower bias regime. The adsorption effects of F2 molecule on the current and NDC behavior of TADHA molecular junctions are studied by applying non-equilibrium Green＇s formalism combined with density functional theory. The numerical results show that the F2 molecule adsorbed on the benzene ring of TADHA molecule near the electrode can dramatically suppresses the current of TADHA molecular junction. When the F2 molecule adsorbed on the conjugated segment of 9,10-dihydroanthracene core of TADHA molecule, an obviously asymmetric effect on the current curves induces the molecular system showing apparent rectifier behavior. However, the current especially the NDC behavior have been significantly enlarged when F2 addition reacted with triple bond of TADHA molecule.展开更多
文摘We present the novel system of molecular distributed sensors using dark soliton pulse array, whereas the multi dark soliton sources can be generated and the molecular distributed sensors presented via an optical multiplexer (MUX). Initially, the dark soliton array with different center wavelengths can be generated, then the transmission molecules/atoms can be secured by using the dark soliton behaviors, whereas the dark soliton valley can be configured as the molecule/atom trapping potential well, which can be used to trap molecule/atom. In this case, the transported molecules/atoms in the router can be used to form the molecular distributed sensors, whereas the induced changes in the molecular distributed sensors can be formed and measured via the drop port of each output multiplexer.
基金financial support from the National Natural Science Foundation of China(Nos.21575153,21435008,21874146)Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB14030200)the Key Research Program of the Chinese Academy of Sciences(No.KFZD-SW-203)
文摘Aflatoxin B1(AFB1)is a highly toxic mycotoxin,and rapid and sensitive detection of AFB1 is in demand for food safety and environmental analysis.Here we described a simple aptamer molecular beacon assay for rapid detection of aflatoxin B1(AFB1)by using an aptamer with a fluorescein(FAM)label at the 50 end and a fluorescence quencher(black hole quencher 1,BHQ1)at the 30 end.In the presence of AFB1,the aptamer probe bound with AFB1 and induced a hairpin structure,drawing FAM and BHQ1 into close proximity and leading to fluorescence quenching.This assay allowed for a detection limit of 3.9 nmol/L and a dynamic range from 3.9 nmol/L to 4 mmol/L.Specificity test showed other mycotoxins including ochratoxin A,ochratoxin B,fumonisin B1,fumonisin B2,and zearalenone had negligible influence on detection of AFB1.AFB1 spiked in diluted liquor wine,methanol,or corn flour samples was successfully detected by using this aptamer probe,and the assay showed potential for real sample analysis.
基金Supported by the National Natural Science Foundation of China(Nos20575023, 20955001)the Key Project of International Cooperation Foundation of Fujian Province, China(No2006I0021)the Natural Science Foundation of Fujian Province, China(NosD0710017, D0810016 and U0850008)
文摘A sensitive, fast and low-cost molecular imprinted polymeric sensor for quantitative determination of parathion was prepared with chitosan（CS） as function matrix and parathion（PT） as template molecule via constant potential electrochemical deposition. Sensitive response was obtained with a detection limit of 1.0× 10-7 mol/L and an excellent recognition for PT was achieved due to the good memory capacity of the sensor. The developed sensor exhibited good fabrication reproducibility and acceptable stability, which provided a new promising tool for pesticide analysis.
文摘The sensitivity and selectivity to H_2 of a new In_2O_3-based gas sensor were improvedsignificantly by surface chemical modification. A dense layer of SiO_2 near the surface of the porousIn_2O_3 bead was formed by chemical vapor deposition(CVD)of diethoxydimethysilane(DEMS).The dense layer functioned as a molecular sieve, thereby the diffusion of gases with large moleculardiameters,except for H_2, was effectively controlled, resulting in a prominent selectivity and highsensitivity for H_2. The working mechanism of the sensor was also presented.
文摘Methacrylic acid with isoproturon has been utilized to prepare molecularly imprinted polymeric (MIP) membrane on Whatman filter paper no. 5 for selective electrochemical estimation of isoproturon pesticide. MIP membrane was prepared by radical polymerization and characterized using Ultra Violet spectrophotometer, Fourier Transform Infra Red (FTIR) spectroscopy and Scanning Electron Microscopy (SEM). Contact angle study was used to determine the surface energy of the MIP membrane and electrical conductivity measurements were performed by applying a small-amplitude alternating voltage (20 mV) with frequencies varying from 20 Hz to 80 kHz generated by a low-frequency wave form generator. Different isoproturon concentrations in samples were tested and analyzed. Results indicate linear increase in membrane resistance with increasing isoproturon in 10-3 to 10-6 M range. The selectivity of the electrochemical sensor was confirmed by testing isoproturon in presence of the structurally related compounds monouran and diuran. Results reveal highly selective and sensitive sensor, which can be employed for regular estimation of isoproturon in fields.
文摘The molecularly imprinted technology and the self-assembly technique were used together on the calixarene surface acoustic wave (SAW) chemical sensors to detect organophosphorus compounds. 25-(thioalkyl-alkoxy)-p-tertbutylcalix[4] arene with self-assembled monolayer character was the sensitive coating of the sensors. The sensors had a special response to organophosphorus compounds and the response frequency shift of this sensor to organophosphorus compounds in 0.1 mg/m3 was 350 Hz. The response frequency increased linearly with the increase of the concentration of DMMP in the range from 0.1 to 0.6 mg/m3. The possible explanation of the interaction between the coatings and organophosphorus compounds was discussed.
基金Project supported by the National Natural Science Foundation of China(Grant No.11374195)the Taishan Scholar Project of Shandong Province,Chinathe Jinan Youth Science and Technology Star Project,China(Grant No.201406004)
文摘The single thiolated arylethynylene molecule with 9,10-dihydroanthracene core（denoted as TADHA） possesses pronounced negative differential conductance（NDC） behavior at lower bias regime. The adsorption effects of F2 molecule on the current and NDC behavior of TADHA molecular junctions are studied by applying non-equilibrium Green＇s formalism combined with density functional theory. The numerical results show that the F2 molecule adsorbed on the benzene ring of TADHA molecule near the electrode can dramatically suppresses the current of TADHA molecular junction. When the F2 molecule adsorbed on the conjugated segment of 9,10-dihydroanthracene core of TADHA molecule, an obviously asymmetric effect on the current curves induces the molecular system showing apparent rectifier behavior. However, the current especially the NDC behavior have been significantly enlarged when F2 addition reacted with triple bond of TADHA molecule.
