The deformation energy(Wd)of soil-like tectonic coal is crucial for investigating the mechanism of coal and gas outbursts.Tectonic coal has a significant nonlinear constitutive relationship,which makes traditional ela...The deformation energy(Wd)of soil-like tectonic coal is crucial for investigating the mechanism of coal and gas outbursts.Tectonic coal has a significant nonlinear constitutive relationship,which makes traditional elastic-based models for computing Wdunsuitable.Inspired by critical state soil mechanics,this study theoretically established a new calculation model of Wdsuitable for the coal with nonlinear deformation characteristics.In the new model,the relationship between energy and stress no longer follows the square law(observed in traditional linear elastic models)but exhibits a power function,with the theoretical value of the power exponent ranging between 1 and 2.Hydrostatic cyclic loading and unloading experiments were conducted on four groups of tectonic coal samples and one group of intact coal samples.The results indicated that the relationship between Wdand stress for both intact and tectonic coal follows a power law.The exponents for intact and tectonic coal are close to 2 and 1,respectively.The stress-strain curve of intact coal exhibits small deformation and linear characteristics,whereas the stress-strain curves of tectonic coal show large deformation and nonlinear characteristics.The study specifically investigates the role of coal viscosity in the cyclic loading/unloading process.The downward bending in the unloading curves can be attributed to the time-dependent characteristics of coal,particularly its viscoelastic behavior.Based on experimental statistics,the calculation model of Wdwas further simplified.The simplified model involves only one unknown parameter,which is the power exponent between Wdand stress.The measured Wdof the coal samples increases with the number of load cycles.This phenomenon is attributed to coal's viscoelastic deformation.Within the same stress,the Wdof tectonic coal is an order of magnitude greater than that of intact coal.The calculation model of Wdproposed in this paper provides a new tool for studying the energy principle of coal and gas outbursts.展开更多
[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis...[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis×E.urophylla were studied. [Result] There was certain difference in leaf characteristics values between the 2 species. The leaf areas of E. urophylla and E. grandis×E.urophylla both had significant correlation with leaf length,leaf width,leaf perimeter,leaf length × leaf width,the ratio of leaf length to leaf width,shape factor,etc.,so the factors could be constructed into a regression model with leaf area. Among them,the best 2 models for leaf area calculation which were built by leaf length × leaf width of E. urophylla and E. grandis×E.urophylla both had relatively high accuracy and practical applications. [Conclusion] The research provides a simple and effective leaf area measurement method for studies on the 2 tree species.展开更多
Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in d...Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in different sites.A spherical close-packed model for graphite particle was developed.The fractions of surface carbon atoms（SCA） and edge carbon atoms（ECA） were derived in the expression of crystallographic parameters and particle size,and the effects of ECA on the initial irreversible capacity and the mechanisms of action were analyzed and verified.The results show that the atoms on the edge are more active for electrochemical reactions,such as electrolyte decomposition and tendency to form stable bond with other atoms and groups.For the practical graphite particle,corresponding modifying factors were introduced to revise the difference in calculating results.The revised expression is suitable for the calculation of the fractions of SCA and ECA for carbon materials such as graphite,disordered carbon and modified graphite.展开更多
The process and path of retrometamorphism of coesite have great significance to our understanding of the P-T tracks of the exhumation of ultrahigh-pressure metamorphic rocks. Most of the coesites in the eclogite from ...The process and path of retrometamorphism of coesite have great significance to our understanding of the P-T tracks of the exhumation of ultrahigh-pressure metamorphic rocks. Most of the coesites in the eclogite from Shima, Anhui Province, the Dabie Mountains, China, are found degraded to quartz partly or wholly, with ruptures occurring in the shells, outside which include the coesite and quartz. According to the microscopic observation, the sample of coesite inclusion is composed of garnet, quartz and coesite, based on which we have built a three-shelled composite sphere model to compute the transition of coesite. Based on the crystal growth formulas and pressure conditions of the ruptures in the garnet, we have calculated the radius of the quartz sphere, which depends on temperature, and eventually drawn the different retrometamorphic paths for different retrometamorphism rates.展开更多
With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, ...With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, and the effect of the isothermal transformation temperature and cooling rate on the interlamellar spacing was analyzed quantitatively. Moreover, the relationship models between undercooling and interlamellar spacing were presented by data regression. The experimental results show that the relationship between undercooling and reciprocal interlamellar spacing remains linear when the undercooling is not very large, or else, the interlamellar spacing tends to be constant and the relationship will deviate from linearity.展开更多
On the basis of the existing originally modified calculation models of theoretical combustion temperature（TCT）,some factors,such as the combustion ratio of pulverized coal injection（PCI）,the decomposition heat of ...On the basis of the existing originally modified calculation models of theoretical combustion temperature（TCT）,some factors,such as the combustion ratio of pulverized coal injection（PCI）,the decomposition heat of PCI and the heat consumption of SiO2 in ash reduced in high temperature environment,were amended and improved to put forward a more comprehensive model for calculating TCT.The influences of each improvement on TCT were studied and the results were analyzed compared with those of traditional model and originally modified model,which showed that the present model could reflect the thermal state of a hearth more effectively.展开更多
By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture t...By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.展开更多
High-speed motor has the characteristics of high frequency,high temperature,and more stress,resulting in the field distribution inside the motor being complicated.To better study the electromagnetic characteristics of...High-speed motor has the characteristics of high frequency,high temperature,and more stress,resulting in the field distribution inside the motor being complicated.To better study the electromagnetic characteristics of silicon steel sheet for high-speed motor.In this article,a study on the calculation model of silicon sheet electromagnetic characteristics considers the effects of electromagnetic,stress,and temperature factors.The study is divided into two parts,one is to propose the calculation model of silicon steel sheet’s permeability;the other is to improve the calculation model of silicon steel sheet’s loss.Then,the magnetic field,stress field,and temperature field of a surface mount high speed permanent magnet motor(SMHSPMSM)are analyzed by finite element method(FEM),and the results under the consideration of magnetic,stress,and temperature factors are brought into the calculation model for calculation.Finally,the accuracy of the calculation model for electromagnetic characteristics of silicon steel sheet is verified by comparing the calculated results with the finite element results.展开更多
On the basis of analysis and selection of factors influencing operation cost of coal resources development, fuzzy set method and artificial neural network (ANN) were adopted to set up the classification analysis model...On the basis of analysis and selection of factors influencing operation cost of coal resources development, fuzzy set method and artificial neural network (ANN) were adopted to set up the classification analysis model of coal resources. The collected samples were classified by using this model. Meanwhile, the pattern recognition model for classifying of the coal resources was built according to the factors influencing operation cost. Based on the results achieved above, in the light of the theory of information diffusion, the calculation model for operation cost of coal resources development has been presented and applied in practice, showing that these models are reasonable.展开更多
The aim of this paper is to create and present a new archaeological predictive model via GIS,incorporating what archaeologists consider the most important criterion absent of similar past models,that of critical think...The aim of this paper is to create and present a new archaeological predictive model via GIS,incorporating what archaeologists consider the most important criterion absent of similar past models,that of critical thinking.The new model suggested in this paper is named habitation Model Trend Calculation(MTC)and is not only integrates the archaeological questions with a critical view,but it can be easily adjusted,according to the conditions or the questions concerning the archaeological community.Furthermore,it uses new topographical and geomorphological indexes such as Topographical Index(TPI),Hillslope and Landform Classification that give a new sense of the topographical and geomorphological characteristics of the examined area;therefore this model is a more powerful tool compared to older models that did not use new topographical and geomorphological indexes.The success of the created model is checked as a case study in the region of Messenia,Greece during the Mycenaean era.The region of Messenia is considered as one of the most important Mycenaean regions of Greece due to the great number and the importance of Mycenaean sites identified.For the present paper,140 habitation sites were divided into four hierarchical categories(centers,large villages,villages,and farms)based on the extent and the plurality of the tholos tombs that exist in the broader region and according to the hierarchical categorization used by the archaeologists who have studied the area.The new predictive model presented in this work can assist in solving a series of criticisms that have been expressed in the previous studies regarding such models.Additionally,in the case of Mycenaean Messenia,the model shows excellent results in relation to the habitats of the time.展开更多
Two calculation models of mass action concentrations for CaO-MgO-SiO_2-Al_2O_3-Cr_2O_3 penta-slag was presented whether 3CaO·Cr_2O_3·3SiO_2 was existence or not.Equilibrium mass action concentration of each ...Two calculation models of mass action concentrations for CaO-MgO-SiO_2-Al_2O_3-Cr_2O_3 penta-slag was presented whether 3CaO·Cr_2O_3·3SiO_2 was existence or not.Equilibrium mass action concentration of each element structure was gained.And the models results were compared with experimental activity.The final results illustrated the model without 3CaO·Cr_2O_33SiO_2 was suit for reality.The model could response the element structure of slag as well.展开更多
In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were develop...In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were developed for each air layer,in which the heat exchange due to vertical turbulence and horizontal air flow was taken into account.Then,the vertical temperature distribution of the surface layer air was obtained through the coupled calculation using the energy balance equations of underlying surfaces and building walls.Moreover,the measured air temperatures in a small area(with a horizontal scale of less than 500 m) and a large area(with a horizontal scale of more than 1 000 m) in Guangzhou in summer were used to validate the proposed model.The calculated results accord well with the measured ones,with a maximum relative error of 4.18%.It is thus concluded that the proposed model is a high-accuracy method to theoretically analyze the urban heat island and the thermal environment.展开更多
According to the ion and molecule coexistence theory, the activity model of Al2O3- BaO-B2O3 ternary slag system was established, and the influences of BaO/Al2O3 molar ratio, B2O3 mole fraction and temperature on the a...According to the ion and molecule coexistence theory, the activity model of Al2O3- BaO-B2O3 ternary slag system was established, and the influences of BaO/Al2O3 molar ratio, B2O3 mole fraction and temperature on the activity of the slag system were investigated. Finally, the equal activity curves were drawn with the model results. The results show that with the increase of BaO/Al2O3 ratio, the activity of Al2O3 is significantly reduced, the activi- ty of BaO3-Al2O3 is increased obviously, and the activity of 2Al2O3· B2O3 is also decreased. With the increase of B2O3 mole fraction, the activity of BaO · Al2O3 decreased significantly, while the activities of BaO·B2O3 and 2Al2O3·B2O3 increased. In addition, the influence of temperature on the activities of different components is com paratively smaller than the influence of BaO/Al2O3 ratio and B2O3 mole fraction.展开更多
The nonwoven composites have sandwich structure, with the first and third layers being nonwovens and the middle layer of woven fabric. On the basis of tests of the single rip tearing strength and drawing out resistanc...The nonwoven composites have sandwich structure, with the first and third layers being nonwovens and the middle layer of woven fabric. On the basis of tests of the single rip tearing strength and drawing out resistances of both the nonwoven composites and the woven fabric, the single rip tearing failure mechanism of the composites were analyzed. Then theoretical calculation model for the single rip tearing strength was established, which indicates that the breaking strength of warp and weft yams in the nonwoven composites, the density of warp and weft yarns and drawing out resistances are the main influencing factors. In the end, experimental verification was made, which shows that theoretical values conform to the measured values well.展开更多
This paper establishes a new model for calculation of the standard entropies of solid binary oxides as follows: S_(29)=27.07×Φ_1+1.120×Φ_2+n_1×k×Φ, -22.19 e.u (R=0.9960) We have invesigated 103 ...This paper establishes a new model for calculation of the standard entropies of solid binary oxides as follows: S_(29)=27.07×Φ_1+1.120×Φ_2+n_1×k×Φ, -22.19 e.u (R=0.9960) We have invesigated 103 binary oxides. and found good agreemenl between estimated and experimental entropies.展开更多
Cobalt-protein complexes play an important role in biochemical processes.The structure of the model molecule,Co(H_2O)_3SO_4(phen) has been studied by molecular mechanics.The molecular force field (MM2) parameters have...Cobalt-protein complexes play an important role in biochemical processes.The structure of the model molecule,Co(H_2O)_3SO_4(phen) has been studied by molecular mechanics.The molecular force field (MM2) parameters have been developed for the particular class of the complexes.展开更多
The calculated results of thermodynamic properties in ternary Au-Ga-Sb system by general solution model were presented in this paper.The calculations were carried out in nine cross sections from all three corners in t...The calculated results of thermodynamic properties in ternary Au-Ga-Sb system by general solution model were presented in this paper.The calculations were carried out in nine cross sections from all three corners in the temperature range of 973–1,573 K,and integral molar excess Gibbs energies,partial molar Gibbs energies,activity coefficients and activities for all components are obtained.The activity of gold and gallium shows negative deviation from Rault＇s law for all investigated sections,while antimony activity is close to the line of ideal conditions and even coincides with the line for high content of antimony in the alloy.Data obtained by calculation were compared with those found in literature.It is concluded that compared values show reasonable good agreement.展开更多
This paper describes the numerical calculations of gaseous reaction flows in a model of gas turbine combustors. The profiles of hydrodynamic and thermodynamic patterns in a three-dimensional combustor model are obtain...This paper describes the numerical calculations of gaseous reaction flows in a model of gas turbine combustors. The profiles of hydrodynamic and thermodynamic patterns in a three-dimensional combustor model are obtained by solving the governing differential transport equations. The well-established numerical prediction algorithm SIMPLE, the modified k-ε turbulence model and k-ε-g turbulent diffusion flame model have been adopted in computations. The β function has been selected as probability density function. The effect of combustion process on flow patterns has been investigated. The calculated results have been verified by experiments. They are in remarkably good agreement.展开更多
The existing models for calculating the water breakthrough time of gas wells in gas reservoirs with edge water ignore the effects of reservoir's interlayer heterogeneity,so their calculation results are more devia...The existing models for calculating the water breakthrough time of gas wells in gas reservoirs with edge water ignore the effects of reservoir's interlayer heterogeneity,so their calculation results are more deviated from the actual water breakthrough time of gas wells.As a result,they cannot accurately and effectively guide the adjustment of gas well production system and the formulation of technical water control measures.In this paper,a water-flooding seepage experiment of parallel core was conducted by taking the gas reservoir with edge water of Lower Triassic Feixianguan Formation in the Puguang Gas Field of the Sichuan Basin as an example.Then,the effects of edge water inrush caused by the interlayer heterogeneity of reservoir on water breakthrough time of gas wells was analyzed by means of reservoir numerical simulation.Based on this,the inrush coefficient was introduced to characterize the interlayer heterogeneity of reservoir,and a model for calculating the water breakthrough time of gas wells in the commingled gas reservoir with edge water considering the influence of interlayer heterogeneity was established.Finally,five wells in the gas reservoir of Feixianguan Formation in the Puguang Gas Field were selected for case calculation.And the following research results were obtained.First,the interlayer heterogeneity of gas reservoir results in edge water burst.And the stronger the interlayer heterogeneity,the more severe the edge water coning and the sooner the water breakthrough.The water breakthrough time of gas wells depends on the water breakthrough time in the reservoir with the highest permeability.Second,a model for calculating the water breakthrough time of gas wells in the gas reservoirs with edge water considering the influence of reservoir interlayer heterogeneity is established based on the seepage theory.And the relative errors of its calculation results are in the range of 3.43e4.70%,which can satisfy the accuracy requirement of engineering errors.In conclusion,this newly established model can provide an effective method for accurately calculating the water break-through time of the gas well in the commingled gas reservoir with edge water.Furthermore,it is conducive to the adjustment of the production system of gas wells in the gas reservoir with edge water and the formulation of technical water control measures.展开更多
The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more acc...The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more accurately,a novel hypothesis based on Orowan's theory was proposed.The variation in the thickness of each differential element at different positions was considered to establish the analytical model.According to the characteristics of bimetallic composite plate rolling,the rolling deformation can be divided into forward and backward slip zones.The initial thickness ratio after rolling was predetermined by the thickness ratio before rolling;the rolling force balance of the upper and lower rollers was considered the convergence condition;and the final thickness ratio of the bimetallic composite plate was obtained by iterative calculation.The calculation results of the analytical model were compared with the measured and simulated data.The results showed that the errors in the calculation of the rolling force and thickness ratio were both less than 10%.The analytical model has high precision,meets engineering requirements,and has important reference significance for rolling process optimization and thickness ratio prediction.展开更多
基金supported by the Fundamental Research Funds for the Central Universities(No.2024QN11072)National Natural Science Foundation of China(Nos.52404264 and 52174217)State Key Program of the National Natural Science Foundation of China(No.52034008)。
文摘The deformation energy(Wd)of soil-like tectonic coal is crucial for investigating the mechanism of coal and gas outbursts.Tectonic coal has a significant nonlinear constitutive relationship,which makes traditional elastic-based models for computing Wdunsuitable.Inspired by critical state soil mechanics,this study theoretically established a new calculation model of Wdsuitable for the coal with nonlinear deformation characteristics.In the new model,the relationship between energy and stress no longer follows the square law(observed in traditional linear elastic models)but exhibits a power function,with the theoretical value of the power exponent ranging between 1 and 2.Hydrostatic cyclic loading and unloading experiments were conducted on four groups of tectonic coal samples and one group of intact coal samples.The results indicated that the relationship between Wdand stress for both intact and tectonic coal follows a power law.The exponents for intact and tectonic coal are close to 2 and 1,respectively.The stress-strain curve of intact coal exhibits small deformation and linear characteristics,whereas the stress-strain curves of tectonic coal show large deformation and nonlinear characteristics.The study specifically investigates the role of coal viscosity in the cyclic loading/unloading process.The downward bending in the unloading curves can be attributed to the time-dependent characteristics of coal,particularly its viscoelastic behavior.Based on experimental statistics,the calculation model of Wdwas further simplified.The simplified model involves only one unknown parameter,which is the power exponent between Wdand stress.The measured Wdof the coal samples increases with the number of load cycles.This phenomenon is attributed to coal's viscoelastic deformation.Within the same stress,the Wdof tectonic coal is an order of magnitude greater than that of intact coal.The calculation model of Wdproposed in this paper provides a new tool for studying the energy principle of coal and gas outbursts.
基金Supported by Key Science and Technology Project of Forestry in Guangxi Province for the Eleventh Five-year Plan ([2009] No.8)~~
文摘[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis×E.urophylla were studied. [Result] There was certain difference in leaf characteristics values between the 2 species. The leaf areas of E. urophylla and E. grandis×E.urophylla both had significant correlation with leaf length,leaf width,leaf perimeter,leaf length × leaf width,the ratio of leaf length to leaf width,shape factor,etc.,so the factors could be constructed into a regression model with leaf area. Among them,the best 2 models for leaf area calculation which were built by leaf length × leaf width of E. urophylla and E. grandis×E.urophylla both had relatively high accuracy and practical applications. [Conclusion] The research provides a simple and effective leaf area measurement method for studies on the 2 tree species.
基金Project (09001232) supported by the Doctoral Foundation of Henan University of Science and Technology,China
文摘Based on the hexagonal crystallite model of graphite,the electrochemical characteristics of carbon atoms on the edge and basal plane were proposed by analyzing graphite crystal structure and bonds of carbon atoms in different sites.A spherical close-packed model for graphite particle was developed.The fractions of surface carbon atoms（SCA） and edge carbon atoms（ECA） were derived in the expression of crystallographic parameters and particle size,and the effects of ECA on the initial irreversible capacity and the mechanisms of action were analyzed and verified.The results show that the atoms on the edge are more active for electrochemical reactions,such as electrolyte decomposition and tendency to form stable bond with other atoms and groups.For the practical graphite particle,corresponding modifying factors were introduced to revise the difference in calculating results.The revised expression is suitable for the calculation of the fractions of SCA and ECA for carbon materials such as graphite,disordered carbon and modified graphite.
基金the National Natural Science Foundation of China grants 40172019 ,40272083 the Natural Science Foundation of HubeiProvince grant 2002AB020.
文摘The process and path of retrometamorphism of coesite have great significance to our understanding of the P-T tracks of the exhumation of ultrahigh-pressure metamorphic rocks. Most of the coesites in the eclogite from Shima, Anhui Province, the Dabie Mountains, China, are found degraded to quartz partly or wholly, with ruptures occurring in the shells, outside which include the coesite and quartz. According to the microscopic observation, the sample of coesite inclusion is composed of garnet, quartz and coesite, based on which we have built a three-shelled composite sphere model to compute the transition of coesite. Based on the crystal growth formulas and pressure conditions of the ruptures in the garnet, we have calculated the radius of the quartz sphere, which depends on temperature, and eventually drawn the different retrometamorphic paths for different retrometamorphism rates.
文摘With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, and the effect of the isothermal transformation temperature and cooling rate on the interlamellar spacing was analyzed quantitatively. Moreover, the relationship models between undercooling and interlamellar spacing were presented by data regression. The experimental results show that the relationship between undercooling and reciprocal interlamellar spacing remains linear when the undercooling is not very large, or else, the interlamellar spacing tends to be constant and the relationship will deviate from linearity.
基金Item Sponsored by National Natural Science Foundation of China(50974143)
文摘On the basis of the existing originally modified calculation models of theoretical combustion temperature（TCT）,some factors,such as the combustion ratio of pulverized coal injection（PCI）,the decomposition heat of PCI and the heat consumption of SiO2 in ash reduced in high temperature environment,were amended and improved to put forward a more comprehensive model for calculating TCT.The influences of each improvement on TCT were studied and the results were analyzed compared with those of traditional model and originally modified model,which showed that the present model could reflect the thermal state of a hearth more effectively.
文摘By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.
基金the Key International Cooperation of National Natural Science Foundation of China under Grant 51920105011Liaoning BaiQianWan Talents Programthe Natural Science Foundation of LiaoNing Province under Grant 2021-YQ-09。
文摘High-speed motor has the characteristics of high frequency,high temperature,and more stress,resulting in the field distribution inside the motor being complicated.To better study the electromagnetic characteristics of silicon steel sheet for high-speed motor.In this article,a study on the calculation model of silicon sheet electromagnetic characteristics considers the effects of electromagnetic,stress,and temperature factors.The study is divided into two parts,one is to propose the calculation model of silicon steel sheet’s permeability;the other is to improve the calculation model of silicon steel sheet’s loss.Then,the magnetic field,stress field,and temperature field of a surface mount high speed permanent magnet motor(SMHSPMSM)are analyzed by finite element method(FEM),and the results under the consideration of magnetic,stress,and temperature factors are brought into the calculation model for calculation.Finally,the accuracy of the calculation model for electromagnetic characteristics of silicon steel sheet is verified by comparing the calculated results with the finite element results.
文摘On the basis of analysis and selection of factors influencing operation cost of coal resources development, fuzzy set method and artificial neural network (ANN) were adopted to set up the classification analysis model of coal resources. The collected samples were classified by using this model. Meanwhile, the pattern recognition model for classifying of the coal resources was built according to the factors influencing operation cost. Based on the results achieved above, in the light of the theory of information diffusion, the calculation model for operation cost of coal resources development has been presented and applied in practice, showing that these models are reasonable.
文摘The aim of this paper is to create and present a new archaeological predictive model via GIS,incorporating what archaeologists consider the most important criterion absent of similar past models,that of critical thinking.The new model suggested in this paper is named habitation Model Trend Calculation(MTC)and is not only integrates the archaeological questions with a critical view,but it can be easily adjusted,according to the conditions or the questions concerning the archaeological community.Furthermore,it uses new topographical and geomorphological indexes such as Topographical Index(TPI),Hillslope and Landform Classification that give a new sense of the topographical and geomorphological characteristics of the examined area;therefore this model is a more powerful tool compared to older models that did not use new topographical and geomorphological indexes.The success of the created model is checked as a case study in the region of Messenia,Greece during the Mycenaean era.The region of Messenia is considered as one of the most important Mycenaean regions of Greece due to the great number and the importance of Mycenaean sites identified.For the present paper,140 habitation sites were divided into four hierarchical categories(centers,large villages,villages,and farms)based on the extent and the plurality of the tholos tombs that exist in the broader region and according to the hierarchical categorization used by the archaeologists who have studied the area.The new predictive model presented in this work can assist in solving a series of criticisms that have been expressed in the previous studies regarding such models.Additionally,in the case of Mycenaean Messenia,the model shows excellent results in relation to the habitats of the time.
文摘Two calculation models of mass action concentrations for CaO-MgO-SiO_2-Al_2O_3-Cr_2O_3 penta-slag was presented whether 3CaO·Cr_2O_3·3SiO_2 was existence or not.Equilibrium mass action concentration of each element structure was gained.And the models results were compared with experimental activity.The final results illustrated the model without 3CaO·Cr_2O_33SiO_2 was suit for reality.The model could response the element structure of slag as well.
基金Project(50808083) supported by the National Natural Science Foundation of China
文摘In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were developed for each air layer,in which the heat exchange due to vertical turbulence and horizontal air flow was taken into account.Then,the vertical temperature distribution of the surface layer air was obtained through the coupled calculation using the energy balance equations of underlying surfaces and building walls.Moreover,the measured air temperatures in a small area(with a horizontal scale of less than 500 m) and a large area(with a horizontal scale of more than 1 000 m) in Guangzhou in summer were used to validate the proposed model.The calculated results accord well with the measured ones,with a maximum relative error of 4.18%.It is thus concluded that the proposed model is a high-accuracy method to theoretically analyze the urban heat island and the thermal environment.
文摘According to the ion and molecule coexistence theory, the activity model of Al2O3- BaO-B2O3 ternary slag system was established, and the influences of BaO/Al2O3 molar ratio, B2O3 mole fraction and temperature on the activity of the slag system were investigated. Finally, the equal activity curves were drawn with the model results. The results show that with the increase of BaO/Al2O3 ratio, the activity of Al2O3 is significantly reduced, the activi- ty of BaO3-Al2O3 is increased obviously, and the activity of 2Al2O3· B2O3 is also decreased. With the increase of B2O3 mole fraction, the activity of BaO · Al2O3 decreased significantly, while the activities of BaO·B2O3 and 2Al2O3·B2O3 increased. In addition, the influence of temperature on the activities of different components is com paratively smaller than the influence of BaO/Al2O3 ratio and B2O3 mole fraction.
文摘The nonwoven composites have sandwich structure, with the first and third layers being nonwovens and the middle layer of woven fabric. On the basis of tests of the single rip tearing strength and drawing out resistances of both the nonwoven composites and the woven fabric, the single rip tearing failure mechanism of the composites were analyzed. Then theoretical calculation model for the single rip tearing strength was established, which indicates that the breaking strength of warp and weft yams in the nonwoven composites, the density of warp and weft yarns and drawing out resistances are the main influencing factors. In the end, experimental verification was made, which shows that theoretical values conform to the measured values well.
文摘This paper establishes a new model for calculation of the standard entropies of solid binary oxides as follows: S_(29)=27.07×Φ_1+1.120×Φ_2+n_1×k×Φ, -22.19 e.u (R=0.9960) We have invesigated 103 binary oxides. and found good agreemenl between estimated and experimental entropies.
基金Project supported by the National Natural Science Foundation of China.
文摘Cobalt-protein complexes play an important role in biochemical processes.The structure of the model molecule,Co(H_2O)_3SO_4(phen) has been studied by molecular mechanics.The molecular force field (MM2) parameters have been developed for the particular class of the complexes.
基金financially supported by the Ministry of Education,Science and Technological Development of the Republic of Serbia (Nos.34005 and 172037)
文摘The calculated results of thermodynamic properties in ternary Au-Ga-Sb system by general solution model were presented in this paper.The calculations were carried out in nine cross sections from all three corners in the temperature range of 973–1,573 K,and integral molar excess Gibbs energies,partial molar Gibbs energies,activity coefficients and activities for all components are obtained.The activity of gold and gallium shows negative deviation from Rault＇s law for all investigated sections,while antimony activity is close to the line of ideal conditions and even coincides with the line for high content of antimony in the alloy.Data obtained by calculation were compared with those found in literature.It is concluded that compared values show reasonable good agreement.
文摘This paper describes the numerical calculations of gaseous reaction flows in a model of gas turbine combustors. The profiles of hydrodynamic and thermodynamic patterns in a three-dimensional combustor model are obtained by solving the governing differential transport equations. The well-established numerical prediction algorithm SIMPLE, the modified k-ε turbulence model and k-ε-g turbulent diffusion flame model have been adopted in computations. The β function has been selected as probability density function. The effect of combustion process on flow patterns has been investigated. The calculated results have been verified by experiments. They are in remarkably good agreement.
基金Project supported by the National Science and Technology Major Project“Research on Gas-Water Two-Phase Flow Characteristics of Deep Reef-Shoal Reservoirs”(No.2016ZX05017-001-HZ02)Chongqing Graduate Research and Innovation Project“Water Invasion Mechanism and Prediction Model of Water Breakthrough Time of Ultra-Deep Carbonate Gas Reservoirs”(No.CYS19351)。
文摘The existing models for calculating the water breakthrough time of gas wells in gas reservoirs with edge water ignore the effects of reservoir's interlayer heterogeneity,so their calculation results are more deviated from the actual water breakthrough time of gas wells.As a result,they cannot accurately and effectively guide the adjustment of gas well production system and the formulation of technical water control measures.In this paper,a water-flooding seepage experiment of parallel core was conducted by taking the gas reservoir with edge water of Lower Triassic Feixianguan Formation in the Puguang Gas Field of the Sichuan Basin as an example.Then,the effects of edge water inrush caused by the interlayer heterogeneity of reservoir on water breakthrough time of gas wells was analyzed by means of reservoir numerical simulation.Based on this,the inrush coefficient was introduced to characterize the interlayer heterogeneity of reservoir,and a model for calculating the water breakthrough time of gas wells in the commingled gas reservoir with edge water considering the influence of interlayer heterogeneity was established.Finally,five wells in the gas reservoir of Feixianguan Formation in the Puguang Gas Field were selected for case calculation.And the following research results were obtained.First,the interlayer heterogeneity of gas reservoir results in edge water burst.And the stronger the interlayer heterogeneity,the more severe the edge water coning and the sooner the water breakthrough.The water breakthrough time of gas wells depends on the water breakthrough time in the reservoir with the highest permeability.Second,a model for calculating the water breakthrough time of gas wells in the gas reservoirs with edge water considering the influence of reservoir interlayer heterogeneity is established based on the seepage theory.And the relative errors of its calculation results are in the range of 3.43e4.70%,which can satisfy the accuracy requirement of engineering errors.In conclusion,this newly established model can provide an effective method for accurately calculating the water break-through time of the gas well in the commingled gas reservoir with edge water.Furthermore,it is conducive to the adjustment of the production system of gas wells in the gas reservoir with edge water and the formulation of technical water control measures.
基金Supported by National Key Research and Development Program of China(Grant No.2018YFA0707300)Major Program of National Natural Science Foundation of China(Grant No.U22A20188)+1 种基金General Program of National Natural Science Foundation of China(Grant No.51974196)Postdoctoral Science Foundation of China(Grant No.201903D421047)。
文摘The prediction of the rolling force and thickness ratio plays an important role in the development and application of bimetallic composite plates.To analyze the rolling force of the bimetallic composite plate more accurately,a novel hypothesis based on Orowan's theory was proposed.The variation in the thickness of each differential element at different positions was considered to establish the analytical model.According to the characteristics of bimetallic composite plate rolling,the rolling deformation can be divided into forward and backward slip zones.The initial thickness ratio after rolling was predetermined by the thickness ratio before rolling;the rolling force balance of the upper and lower rollers was considered the convergence condition;and the final thickness ratio of the bimetallic composite plate was obtained by iterative calculation.The calculation results of the analytical model were compared with the measured and simulated data.The results showed that the errors in the calculation of the rolling force and thickness ratio were both less than 10%.The analytical model has high precision,meets engineering requirements,and has important reference significance for rolling process optimization and thickness ratio prediction.
