Iron-based catalysts have been explored for selective catalytic reduction(SCR)of NO due to environmentally benign characters and good SCR activity.Mn-W-Sb modified siderite catalysts were prepared by impregnation meth...Iron-based catalysts have been explored for selective catalytic reduction(SCR)of NO due to environmentally benign characters and good SCR activity.Mn-W-Sb modified siderite catalysts were prepared by impregnation method based on siderite ore,and SCR perfor-mance of the catalysts was investigated.The catalysts were analyzed by X-ray diffrac-tion,H_(2)-temperature-programmed reduction,Brunauer-Emmett-Teller,Thermogravimetry-derivative thermogravimetry and in-situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS).The modified siderite catalysts calcined at 450℃ mainly consist of Fe_(2)O_(3),and added Mn,W and Sb species are amorphous.3Mn-5W-1.5Sb-siderite catalyst has a wide temperature window of 180-360℃ and good N_(2) selectivity at low temperatures.In-situ DRIFTS results show NH_(4)^(+),coordinated NH_(3),NH_(2),NO_(3)^(-)species(bidentate),NO_(2)-species(nitro,nitro-nitrito,monodentate),and adsorbed NO_(2) can be discovered on the sur-face of Mn-W-Sb modified siderite catalysts,and doping of Mn will enhance adsorbed NO_(2) formation by synergistic catalysis with Fe^(3+).In addition,the addition of Sb can inhibit sulfates formation on the surface of the catalyst in the presence of SO_(2) and H_(2)O.Time-dependent in-situ DRIFTS studies also indicate that both of Lewis and Br?nsted acid sites play a role in SCR of NO by ammonia at low temperatures.The mechanism of NO removal on the 3Mn-5W-1.5Sb-siderite catalyst can be discovered as a combination of Eley-Rideal and Langmuir-Hinshelwood mechanisms with three reaction pathways.The mechanism of NO,oxidized by synergistic catalysis of Fe^(3+)and Mn^(4+/3+)to form NO_(2) among three pathways,reveals the reason of high NO_(x) conversion of the catalyst at medium and low temperatures.展开更多
The influence of the composition （Yb2O3, MgO, CeO2, Li2CO3） on the dielectric properties of medium temperature sintering （Ba, Sr）TiO3 （BST） series capacitor ceramics was investigated by means of conventional tec...The influence of the composition （Yb2O3, MgO, CeO2, Li2CO3） on the dielectric properties of medium temperature sintering （Ba, Sr）TiO3 （BST） series capacitor ceramics was investigated by means of conventional technology process and orthogonal design experiments. The major secondary influencing factors and the influencing tendency of various factor＇s levels for the dielectric properties of BST ceramics were obtained. The optimum formula for maximum dielectric constant （ε） and for minimum dielectric loss （tanδ） was obtained under the experimental conditions. The BST ceramics with optimum comprehensive properties was obtained by means of orthogonal design experiments, with the sintering temperature at 1200 ℃, the dielectric constant 5239, the dielectric loss 0.0097, withstand electric voltage over 6 MV·m^-1, capacitance temperature changing ence of various components on the providing the basis for preparation rate （△C/C） - 75.67%, and suited for Y5V character. The mechanism of the infludielectric properties of medium temperature sintering BST ceramics was studied, thus of multilayer capacitor ceramics and single-chip capacitor ceramics.展开更多
Based on the instantaneous pressurization and depressurization produced by high pressure single pole cylinder pump and valve, the effects of the continuous processing on the peroxidase (POD) activity in wax gourd ju...Based on the instantaneous pressurization and depressurization produced by high pressure single pole cylinder pump and valve, the effects of the continuous processing on the peroxidase (POD) activity in wax gourd juices were investigated. Results showed that the processing factors such as pressure, temperature, pH and processing time are important to the POD activity. POD in crude juices could be inactivated apparently above 50 MPa(pH 4.6, 35℃, 4 min), and activated at 20 MPa ( P < 0.01). Its remarkable inactivation could also be observed at 45 and 55℃ (20 MPa, pH 4.6, 4 min), and the evident activation appears at the material temperature 35℃ ( P < 0.01). The pH 3.0 could destroy POD almost completely (20 MPa, 35℃, 4 min), while pH 6.0 could not influence apparently the POD activity in crude juices( P > 0.05). In addition, the rules of POD activity along with the treatment time are variational under different processing pressures. The higher the treating pressure is, the shorter the processing time is needed to inactivate POD.展开更多
Sustainable energy technologies,particularly fuel cells,are gaining attraction for their potential to reduce carbon emissions and provide efficient power.Proton exchange membrane fuel cells(PEMFCs)have been central to...Sustainable energy technologies,particularly fuel cells,are gaining attraction for their potential to reduce carbon emissions and provide efficient power.Proton exchange membrane fuel cells(PEMFCs)have been central to this development.However,one persistent issue with lowtemperature PEMFCs is the dehydration of Nafion ionomer at elevated temperatures,which severely limits proton conductivity.Wang et al.tackle this by introducing a covalent organic framework(COF)interwoven with Nafion,addressing the challenge of maintaining proton conductivity and oxygen transport in medium temperatures(100–120℃).展开更多
Fe-Cr-Ni austenitic alloys are extensively utilized in the hot-end components of nuclear light water reactors,turbine disks,and gas compressors.However,their low strength at elevated temperatures limits their engineer...Fe-Cr-Ni austenitic alloys are extensively utilized in the hot-end components of nuclear light water reactors,turbine disks,and gas compressors.However,their low strength at elevated temperatures limits their engineering applications.In this study,a novel precipit-ation-strengthened alloy system is developed by incorporating Al and Si elements into a FeCrNi equiatomic alloy.The results indicate that the FeCrNiAl_(x)Si_(x)(at%,x=0.1,0.2)alloys possess heterogeneous precipitation structures that feature a micron-scaleσphase at the grain boundaries and a nanoscale ordered body-centered cube(B2)phase within the grains.An exceptional strength-ductility synergy across a wide temperature range is achieved in FeCrNiAl_(0.1)Si_(0.1)alloys due to grain refinement and precipitation strengthening.Notably,a yield strength of 693.83 MPa,an ultimate tensile strength of 817.55 MPa,and a uniform elongation of 18.27%are attained at 873 K.The dislo-cation shearing mechanism for B2 phases and the Orowan bypass mechanism forσphase,coupled with a high density of nano-twins and stacking faults in the matrix,contribute to the excellent mechanical properties at cryogenic and ambient temperatures.Moreover,the emergence of serratedσphase and micro-twins in the matrix plays a crucial role in the strengthening and toughening mechanisms at inter-mediate temperatures.This study offers a novel perspective and strategy for the development of precipitation-hardened Fe-Cr-Ni austen-itic alloys with exceptional strength-ductility synergy over a broad temperature range.展开更多
A medium-temperature waste-heat recovery system based on the organic Rankine cycle (ORC) is designed to recover the exhaust energy from a heavy-duty diesel engine. Analysis of the 1st law of thermodynamics for an ORC ...A medium-temperature waste-heat recovery system based on the organic Rankine cycle (ORC) is designed to recover the exhaust energy from a heavy-duty diesel engine. Analysis of the 1st law of thermodynamics for an ORC system is performed. This analysis contains two parts. The first part is an analysis with undefined heat exchangers to gain an understanding of the ORC and find out suitable organic fluid parameters for a better ORC efficiency. The second part of the analysis uses combined engine test results and two designs of heat exchangers. By comparing the two designs, an improved system of heat exchangers is described. This analysis also quantifies the effect of engine parameters on ORC system. The study concludes that the supercritical Rankine cycle is a better approach towards waste heat recovery. The ORC system is found to perform better under part-load conditions if the medium-high power condition rather than rated working point of the engine is used as the design parameter. The ORC system achieves the highest waste-heat recovery efficiency of up to 10-15% for the optimised heat ex-changer design.展开更多
Based on the instantaneous high-pressure(IHP)produced by high-pressure single pole-cylinder pump, the effects of combining this pressure with medium temperature on the retention of total vitamin C(Vc)in wax gourd juic...Based on the instantaneous high-pressure(IHP)produced by high-pressure single pole-cylinder pump, the effects of combining this pressure with medium temperature on the retention of total vitamin C(Vc)in wax gourd juices were investigated under 20 - 80 MPa, 35 - 58℃, pH 3. 0 - 6. 0 and processing time 0-8 min. Results showed that the loss of Vc increased with elevated processing temperatures(50 MPa, 4 min). When the temperature of raw juices was 35℃, the retention of total Vc was higher under 40 - 60 MPa than that under the pressure < 40 MPa or > 60 MPa, and it was up to 94%(4 min). The retention of total Vc decreases slowly within 6 min, but rapidly after 6 min. The pH can also influence the retention of total Vc, and this retention can come to a highest point at pH 6.0.展开更多
1 Results The phenomena that affect the membranes could be found in the electrodes when they operate at medium temperature,due to the utilisation of Nafion as an ionomer in the catalytic layer.An approach to improve t...1 Results The phenomena that affect the membranes could be found in the electrodes when they operate at medium temperature,due to the utilisation of Nafion as an ionomer in the catalytic layer.An approach to improve the mechanical properties of the ionomer in the catalytic layer was used: different inorganic compounds (zeolite,titania and zirconia),having different chemical-physical properties,were selected as inorganic fillers due to their water retention capacity and to act as mechanical reinforce by ...展开更多
A new method of preparing CuO solar selective absorbing coating for medium temperature is presented.After pretreatment,brass was overlaid with CuO by chemical plating.The effects of reactant concentration,reaction tem...A new method of preparing CuO solar selective absorbing coating for medium temperature is presented.After pretreatment,brass was overlaid with CuO by chemical plating.The effects of reactant concentration,reaction tem-perature and reaction time on the absorptivity of CuO coating were investigated.The optimized condition of preparing CuO coating was obtained.The CuO coating was analyzed with X-ray photoelectron spectroscopy(XPS)and scanning electron microscopy(SEM).In order to prolong the period of use,the CuO coating was protected by TiO2.The experi-ment shows that the TiO2/CuO coating is more heat-resistant,acid-resistant,and wear resistant than CuO coating,without losing absorptivity markedly.The TiO2 coating can reduce emissivity and protect the CuO coating.展开更多
Both spheroidal graphite iron and compacted graphite iron are used in the automotive industry. A recently proposed mixed graphite iron exhibits a microstructure between the conventional spheroidal graphite iron and co...Both spheroidal graphite iron and compacted graphite iron are used in the automotive industry. A recently proposed mixed graphite iron exhibits a microstructure between the conventional spheroidal graphite iron and compacted graphite iron. Evaluation results clearly indicate the suitability and benefits of mixed graphite iron for exhaust component applications with respect to casting, machining, mechanical, thermophysical, oxidation, and thermal fatigue properties. A new ASTM standard specification(A1095) has been created for compacted, mixed, and spheroidal graphite silicon-molybdenum iron castings. This paper attempts to outline the latest progress in mixed graphite iron published.展开更多
In order to select the appropriate working fluids and optimize parameters for medium-temperature geothermally-powered organic Rankine cycle(ORC), R245 fa is mixed with R601 a at geothermal water temperature of 110 ℃....In order to select the appropriate working fluids and optimize parameters for medium-temperature geothermally-powered organic Rankine cycle(ORC), R245 fa is mixed with R601 a at geothermal water temperature of 110 ℃. Based on thermodynamics, the characteristics of mixture and its influence on the performance of ORC under different evaporating temperatures and composition proportions are analyzed. Results show that the zeotropic mixture R245fa/R601a(0.4/0.6) has the highest performance. When the evaporating temperature reaches 67 ℃, the outlet temperature of geothermal water is 61 ℃, the net power output is the highest and the thermal efficiency is about 9%.展开更多
The increase of insulation thickness(IT)results in the decrease of the heat demand and heat medium temperature.A mathematical model on the optimum environmental insulation thickness(OEIT)for minimizing the annual tota...The increase of insulation thickness(IT)results in the decrease of the heat demand and heat medium temperature.A mathematical model on the optimum environmental insulation thickness(OEIT)for minimizing the annual total environmental impact was established based on the amount of energy and energy grade reduction.Besides,a case study was conducted based on a residential community with a combined heat and power(CHP)-based district heating system(DHS)in Tianjin,China.Moreover,the effect of IT on heat demand,heat medium temperature,exhaust heat,extracted heat,coal consumption,carbon dioxide(CO_(2))emissions and sulfur dioxide(SO_(2))emissions as well as the effect of three types of insulation materials(i.e.,expanded polystyrene,rock wool and glass wool)on the OEIT and minimum annual total environmental impact were studied.The results reveal that the optimization model can be used to determine the OEIT.When the OEIT of expanded polystyrene,rock wool and glass wool is used,the annual total environmental impact can be reduced by 84.563%,83.211%,and 86.104%,respectively.It can be found that glass wool is more beneficial to the environment compared with expanded polystyrene and rock wool.展开更多
基金This work was supported by the National Natural Science Foundation of China(Nos.51406077 and 51276039).
文摘Iron-based catalysts have been explored for selective catalytic reduction(SCR)of NO due to environmentally benign characters and good SCR activity.Mn-W-Sb modified siderite catalysts were prepared by impregnation method based on siderite ore,and SCR perfor-mance of the catalysts was investigated.The catalysts were analyzed by X-ray diffrac-tion,H_(2)-temperature-programmed reduction,Brunauer-Emmett-Teller,Thermogravimetry-derivative thermogravimetry and in-situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS).The modified siderite catalysts calcined at 450℃ mainly consist of Fe_(2)O_(3),and added Mn,W and Sb species are amorphous.3Mn-5W-1.5Sb-siderite catalyst has a wide temperature window of 180-360℃ and good N_(2) selectivity at low temperatures.In-situ DRIFTS results show NH_(4)^(+),coordinated NH_(3),NH_(2),NO_(3)^(-)species(bidentate),NO_(2)-species(nitro,nitro-nitrito,monodentate),and adsorbed NO_(2) can be discovered on the sur-face of Mn-W-Sb modified siderite catalysts,and doping of Mn will enhance adsorbed NO_(2) formation by synergistic catalysis with Fe^(3+).In addition,the addition of Sb can inhibit sulfates formation on the surface of the catalyst in the presence of SO_(2) and H_(2)O.Time-dependent in-situ DRIFTS studies also indicate that both of Lewis and Br?nsted acid sites play a role in SCR of NO by ammonia at low temperatures.The mechanism of NO removal on the 3Mn-5W-1.5Sb-siderite catalyst can be discovered as a combination of Eley-Rideal and Langmuir-Hinshelwood mechanisms with three reaction pathways.The mechanism of NO,oxidized by synergistic catalysis of Fe^(3+)and Mn^(4+/3+)to form NO_(2) among three pathways,reveals the reason of high NO_(x) conversion of the catalyst at medium and low temperatures.
文摘The influence of the composition （Yb2O3, MgO, CeO2, Li2CO3） on the dielectric properties of medium temperature sintering （Ba, Sr）TiO3 （BST） series capacitor ceramics was investigated by means of conventional technology process and orthogonal design experiments. The major secondary influencing factors and the influencing tendency of various factor＇s levels for the dielectric properties of BST ceramics were obtained. The optimum formula for maximum dielectric constant （ε） and for minimum dielectric loss （tanδ） was obtained under the experimental conditions. The BST ceramics with optimum comprehensive properties was obtained by means of orthogonal design experiments, with the sintering temperature at 1200 ℃, the dielectric constant 5239, the dielectric loss 0.0097, withstand electric voltage over 6 MV·m^-1, capacitance temperature changing ence of various components on the providing the basis for preparation rate （△C/C） - 75.67%, and suited for Y5V character. The mechanism of the infludielectric properties of medium temperature sintering BST ceramics was studied, thus of multilayer capacitor ceramics and single-chip capacitor ceramics.
文摘Based on the instantaneous pressurization and depressurization produced by high pressure single pole cylinder pump and valve, the effects of the continuous processing on the peroxidase (POD) activity in wax gourd juices were investigated. Results showed that the processing factors such as pressure, temperature, pH and processing time are important to the POD activity. POD in crude juices could be inactivated apparently above 50 MPa(pH 4.6, 35℃, 4 min), and activated at 20 MPa ( P < 0.01). Its remarkable inactivation could also be observed at 45 and 55℃ (20 MPa, pH 4.6, 4 min), and the evident activation appears at the material temperature 35℃ ( P < 0.01). The pH 3.0 could destroy POD almost completely (20 MPa, 35℃, 4 min), while pH 6.0 could not influence apparently the POD activity in crude juices( P > 0.05). In addition, the rules of POD activity along with the treatment time are variational under different processing pressures. The higher the treating pressure is, the shorter the processing time is needed to inactivate POD.
基金financial support from the National Natural Science Foundation of China(No.22301139)the Natural Science Foundation of Jiangsu Province(No.BK 20230375).
文摘Sustainable energy technologies,particularly fuel cells,are gaining attraction for their potential to reduce carbon emissions and provide efficient power.Proton exchange membrane fuel cells(PEMFCs)have been central to this development.However,one persistent issue with lowtemperature PEMFCs is the dehydration of Nafion ionomer at elevated temperatures,which severely limits proton conductivity.Wang et al.tackle this by introducing a covalent organic framework(COF)interwoven with Nafion,addressing the challenge of maintaining proton conductivity and oxygen transport in medium temperatures(100–120℃).
基金supported by the National Natural Science Foundation of China(Nos.12072220,12102291,and 12225207)the Science and Technology Innovation Teams of Shanxi Province,China(No.202204051002006)the Central Guidance on Local Science and Technology Development Fund of Shanxi Province,China(No.YDZJSX2021B002).
文摘Fe-Cr-Ni austenitic alloys are extensively utilized in the hot-end components of nuclear light water reactors,turbine disks,and gas compressors.However,their low strength at elevated temperatures limits their engineering applications.In this study,a novel precipit-ation-strengthened alloy system is developed by incorporating Al and Si elements into a FeCrNi equiatomic alloy.The results indicate that the FeCrNiAl_(x)Si_(x)(at%,x=0.1,0.2)alloys possess heterogeneous precipitation structures that feature a micron-scaleσphase at the grain boundaries and a nanoscale ordered body-centered cube(B2)phase within the grains.An exceptional strength-ductility synergy across a wide temperature range is achieved in FeCrNiAl_(0.1)Si_(0.1)alloys due to grain refinement and precipitation strengthening.Notably,a yield strength of 693.83 MPa,an ultimate tensile strength of 817.55 MPa,and a uniform elongation of 18.27%are attained at 873 K.The dislo-cation shearing mechanism for B2 phases and the Orowan bypass mechanism forσphase,coupled with a high density of nano-twins and stacking faults in the matrix,contribute to the excellent mechanical properties at cryogenic and ambient temperatures.Moreover,the emergence of serratedσphase and micro-twins in the matrix plays a crucial role in the strengthening and toughening mechanisms at inter-mediate temperatures.This study offers a novel perspective and strategy for the development of precipitation-hardened Fe-Cr-Ni austen-itic alloys with exceptional strength-ductility synergy over a broad temperature range.
基金supported by the National Natural Science Foundation of China (Grant No. 51076013)the Specialized Research Fund for the Doc-toral Program of Higher Education of China (Grant No. 20101101110008)
文摘A medium-temperature waste-heat recovery system based on the organic Rankine cycle (ORC) is designed to recover the exhaust energy from a heavy-duty diesel engine. Analysis of the 1st law of thermodynamics for an ORC system is performed. This analysis contains two parts. The first part is an analysis with undefined heat exchangers to gain an understanding of the ORC and find out suitable organic fluid parameters for a better ORC efficiency. The second part of the analysis uses combined engine test results and two designs of heat exchangers. By comparing the two designs, an improved system of heat exchangers is described. This analysis also quantifies the effect of engine parameters on ORC system. The study concludes that the supercritical Rankine cycle is a better approach towards waste heat recovery. The ORC system is found to perform better under part-load conditions if the medium-high power condition rather than rated working point of the engine is used as the design parameter. The ORC system achieves the highest waste-heat recovery efficiency of up to 10-15% for the optimised heat ex-changer design.
文摘Based on the instantaneous high-pressure(IHP)produced by high-pressure single pole-cylinder pump, the effects of combining this pressure with medium temperature on the retention of total vitamin C(Vc)in wax gourd juices were investigated under 20 - 80 MPa, 35 - 58℃, pH 3. 0 - 6. 0 and processing time 0-8 min. Results showed that the loss of Vc increased with elevated processing temperatures(50 MPa, 4 min). When the temperature of raw juices was 35℃, the retention of total Vc was higher under 40 - 60 MPa than that under the pressure < 40 MPa or > 60 MPa, and it was up to 94%(4 min). The retention of total Vc decreases slowly within 6 min, but rapidly after 6 min. The pH can also influence the retention of total Vc, and this retention can come to a highest point at pH 6.0.
文摘1 Results The phenomena that affect the membranes could be found in the electrodes when they operate at medium temperature,due to the utilisation of Nafion as an ionomer in the catalytic layer.An approach to improve the mechanical properties of the ionomer in the catalytic layer was used: different inorganic compounds (zeolite,titania and zirconia),having different chemical-physical properties,were selected as inorganic fillers due to their water retention capacity and to act as mechanical reinforce by ...
基金supported by the Analysis Centre of Tianjin University.
文摘A new method of preparing CuO solar selective absorbing coating for medium temperature is presented.After pretreatment,brass was overlaid with CuO by chemical plating.The effects of reactant concentration,reaction tem-perature and reaction time on the absorptivity of CuO coating were investigated.The optimized condition of preparing CuO coating was obtained.The CuO coating was analyzed with X-ray photoelectron spectroscopy(XPS)and scanning electron microscopy(SEM).In order to prolong the period of use,the CuO coating was protected by TiO2.The experi-ment shows that the TiO2/CuO coating is more heat-resistant,acid-resistant,and wear resistant than CuO coating,without losing absorptivity markedly.The TiO2 coating can reduce emissivity and protect the CuO coating.
基金provided by the Natural Resources Canada through the Program of Energy Research and Development
文摘Both spheroidal graphite iron and compacted graphite iron are used in the automotive industry. A recently proposed mixed graphite iron exhibits a microstructure between the conventional spheroidal graphite iron and compacted graphite iron. Evaluation results clearly indicate the suitability and benefits of mixed graphite iron for exhaust component applications with respect to casting, machining, mechanical, thermophysical, oxidation, and thermal fatigue properties. A new ASTM standard specification(A1095) has been created for compacted, mixed, and spheroidal graphite silicon-molybdenum iron castings. This paper attempts to outline the latest progress in mixed graphite iron published.
基金Supported by the National High Technology Research and Development Program of China("863" Program,No.2012AA053001)
文摘In order to select the appropriate working fluids and optimize parameters for medium-temperature geothermally-powered organic Rankine cycle(ORC), R245 fa is mixed with R601 a at geothermal water temperature of 110 ℃. Based on thermodynamics, the characteristics of mixture and its influence on the performance of ORC under different evaporating temperatures and composition proportions are analyzed. Results show that the zeotropic mixture R245fa/R601a(0.4/0.6) has the highest performance. When the evaporating temperature reaches 67 ℃, the outlet temperature of geothermal water is 61 ℃, the net power output is the highest and the thermal efficiency is about 9%.
基金supported by the Scientific Research Project of Beijing Municipal Education Commission,China(KM201810017004)National Key R&D Program Project of China(No.2018YFC0704800)the“Engineering and Technology R&D Center of Clean Air Conditioning in Colleges of Shandong(Shandong Huayu University of Technology).”。
文摘The increase of insulation thickness(IT)results in the decrease of the heat demand and heat medium temperature.A mathematical model on the optimum environmental insulation thickness(OEIT)for minimizing the annual total environmental impact was established based on the amount of energy and energy grade reduction.Besides,a case study was conducted based on a residential community with a combined heat and power(CHP)-based district heating system(DHS)in Tianjin,China.Moreover,the effect of IT on heat demand,heat medium temperature,exhaust heat,extracted heat,coal consumption,carbon dioxide(CO_(2))emissions and sulfur dioxide(SO_(2))emissions as well as the effect of three types of insulation materials(i.e.,expanded polystyrene,rock wool and glass wool)on the OEIT and minimum annual total environmental impact were studied.The results reveal that the optimization model can be used to determine the OEIT.When the OEIT of expanded polystyrene,rock wool and glass wool is used,the annual total environmental impact can be reduced by 84.563%,83.211%,and 86.104%,respectively.It can be found that glass wool is more beneficial to the environment compared with expanded polystyrene and rock wool.
