To reduce computational costs, an improved form of the frequency domain boundary element method（BEM） is proposed for two-dimensional radiation and propagation acoustic problems in a subsonic uniform flow with arbitr...To reduce computational costs, an improved form of the frequency domain boundary element method（BEM） is proposed for two-dimensional radiation and propagation acoustic problems in a subsonic uniform flow with arbitrary orientation. The boundary integral equation（BIE） representation solves the two-dimensional convected Helmholtz equation（CHE） and its fundamental solution, which must satisfy a new Sommerfeld radiation condition（SRC） in the physical space. In order to facilitate conventional formulations, the variables of the advanced form are expressed only in terms of the acoustic pressure as well as its normal and tangential derivatives, and their multiplication operators are based on the convected Green＇s kernel and its modified derivative. The proposed approach significantly reduces the CPU times of classical computational codes for modeling acoustic domains with arbitrary mean flow. It is validated by a comparison with the analytical solutions for the sound radiation problems of monopole,dipole and quadrupole sources in the presence of a subsonic uniform flow with arbitrary orientation.展开更多
Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Qu...Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Quaternary rocks and is located in the Central Iran zone. According to the presence of signs of gold mineralization in this area, it is necessary to identify important mineral areas in this area. Therefore, finding information is necessary about the relationship and monitoring the elements of gold, arsenic, and antimony relative to each other in this area to determine the extent of geochemical halos and to estimate the grade. Therefore, a well-known and useful K-means method is used for monitoring the elements in the present study, this is a clustering method based on minimizing the total Euclidean distances of each sample from the center of the classes which are assigned to them. In this research, the clustering quality function and the utility rate of the sample have been used in the desired cluster (S(i)) to determine the optimum number of clusters. Finally, with regard to the cluster centers and the results, the equations were used to predict the amount of the gold element based on four parameters of arsenic and antimony grade, length and width of sampling points.展开更多
The stochastic boundary element method is developed to analyze elasticity problems with random material and/or geometrical parameters and ran- domly perturbed boundaries. Based on the first-order Taylor series expansi...The stochastic boundary element method is developed to analyze elasticity problems with random material and/or geometrical parameters and ran- domly perturbed boundaries. Based on the first-order Taylor series expansion, the boundary integration equations concerning the mean and deviation of the displace- ments are derived, respectively. It is found that the randomness of material param- eters is equivalent to a random body force, so the mean and covariance matrices of unknown boundary displacements and tractions can be obtained. Furthermore, the mean and covariance of displacements and stresses at inner points can also be obtained. Numerical examples show that the proposed stochastic boundary element method gives satisfactory solutions, as compared with those obtained by theoretical analysis or other numerical methods.展开更多
In alloy bar rolling process, the component of alloyed steel influenced the spread coefficient greatly, therefore, the component influence coefficient m of different alloyed steel has been determined firstly to calcul...In alloy bar rolling process, the component of alloyed steel influenced the spread coefficient greatly, therefore, the component influence coefficient m of different alloyed steel has been determined firstly to calculate the maximum spread. Then the curvature radius of stress free surface and the ＂critical point on the contact boundary＂ have been solved, the surface profile of outgoing workpiece has been obtained. Furthermore, the formula of the equivalent contact section area has been proposed and the mean roll radius has been calculated. The bar rolling experiment and the rigid-plastic FEM （finite element method） simulation have been carried out to verify the novel approach. Compared with experimental data and simulation results, the novel approach can be used in setting processing parameter and design of finishing groove.展开更多
Sun synchronous orbit and frozen orbit formed due to J 2 perturbation have very strict constraints on orbital parameters,which have restricted the application a lot.In this paper,several control strategies were illust...Sun synchronous orbit and frozen orbit formed due to J 2 perturbation have very strict constraints on orbital parameters,which have restricted the application a lot.In this paper,several control strategies were illustrated to realize Sun synchronous frozen orbit with arbitrary orbital elements using continuous low-thrust.Firstly,according to mean element method,the averaged rate of change of the orbital elements,originating from disturbing constant accelerations over one orbital period,was derived from Gauss＇ variation of parameters equations.Then,we proposed that binormal acceleration could be used to realize Sun synchronous orbit,and radial or transverse acceleration could be adopted to eliminate the rotation of the argument of the perigee.Finally,amending methods on the control strategies mentioned above were presented to eliminate the residual secular growth.Simulation results showed that the control strategies illustrated in this paper could realize Sun synchronous frozen orbit with arbitrary orbital elements,and can save much more energy than the schemes presented in previous studies,and have no side effect on other orbital parameters＇ secular motion.展开更多
针对汽轮机叶片在工作中诸多参数的不确定性,通过建立叶片的力学模型,将随机有限元和一次二阶矩法相结合,对其进行了可靠度计算,并将随机有限元法的计算结果与解析法和 Monte Carlo 法进行了比较,证明了随机有限元法的正确性。对叶片的...针对汽轮机叶片在工作中诸多参数的不确定性,通过建立叶片的力学模型,将随机有限元和一次二阶矩法相结合,对其进行了可靠度计算,并将随机有限元法的计算结果与解析法和 Monte Carlo 法进行了比较,证明了随机有限元法的正确性。对叶片的可靠度分析表明:当不能用解析法得到载荷响应,且载荷响应的概率密度函数无法得到时,采用随机有限元— 一次二阶矩法对结构进行可靠性分析是一种便捷方法。展开更多
基金supported by National Engineering School of Tunis (No.13039.1)
文摘To reduce computational costs, an improved form of the frequency domain boundary element method（BEM） is proposed for two-dimensional radiation and propagation acoustic problems in a subsonic uniform flow with arbitrary orientation. The boundary integral equation（BIE） representation solves the two-dimensional convected Helmholtz equation（CHE） and its fundamental solution, which must satisfy a new Sommerfeld radiation condition（SRC） in the physical space. In order to facilitate conventional formulations, the variables of the advanced form are expressed only in terms of the acoustic pressure as well as its normal and tangential derivatives, and their multiplication operators are based on the convected Green＇s kernel and its modified derivative. The proposed approach significantly reduces the CPU times of classical computational codes for modeling acoustic domains with arbitrary mean flow. It is validated by a comparison with the analytical solutions for the sound radiation problems of monopole,dipole and quadrupole sources in the presence of a subsonic uniform flow with arbitrary orientation.
文摘Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Quaternary rocks and is located in the Central Iran zone. According to the presence of signs of gold mineralization in this area, it is necessary to identify important mineral areas in this area. Therefore, finding information is necessary about the relationship and monitoring the elements of gold, arsenic, and antimony relative to each other in this area to determine the extent of geochemical halos and to estimate the grade. Therefore, a well-known and useful K-means method is used for monitoring the elements in the present study, this is a clustering method based on minimizing the total Euclidean distances of each sample from the center of the classes which are assigned to them. In this research, the clustering quality function and the utility rate of the sample have been used in the desired cluster (S(i)) to determine the optimum number of clusters. Finally, with regard to the cluster centers and the results, the equations were used to predict the amount of the gold element based on four parameters of arsenic and antimony grade, length and width of sampling points.
文摘The stochastic boundary element method is developed to analyze elasticity problems with random material and/or geometrical parameters and ran- domly perturbed boundaries. Based on the first-order Taylor series expansion, the boundary integration equations concerning the mean and deviation of the displace- ments are derived, respectively. It is found that the randomness of material param- eters is equivalent to a random body force, so the mean and covariance matrices of unknown boundary displacements and tractions can be obtained. Furthermore, the mean and covariance of displacements and stresses at inner points can also be obtained. Numerical examples show that the proposed stochastic boundary element method gives satisfactory solutions, as compared with those obtained by theoretical analysis or other numerical methods.
文摘In alloy bar rolling process, the component of alloyed steel influenced the spread coefficient greatly, therefore, the component influence coefficient m of different alloyed steel has been determined firstly to calculate the maximum spread. Then the curvature radius of stress free surface and the ＂critical point on the contact boundary＂ have been solved, the surface profile of outgoing workpiece has been obtained. Furthermore, the formula of the equivalent contact section area has been proposed and the mean roll radius has been calculated. The bar rolling experiment and the rigid-plastic FEM （finite element method） simulation have been carried out to verify the novel approach. Compared with experimental data and simulation results, the novel approach can be used in setting processing parameter and design of finishing groove.
基金supported by the National Natural Science Foundation of China (10702078)the Research Foundation of National University of Defense Technology (JC08-01-05)
文摘Sun synchronous orbit and frozen orbit formed due to J 2 perturbation have very strict constraints on orbital parameters,which have restricted the application a lot.In this paper,several control strategies were illustrated to realize Sun synchronous frozen orbit with arbitrary orbital elements using continuous low-thrust.Firstly,according to mean element method,the averaged rate of change of the orbital elements,originating from disturbing constant accelerations over one orbital period,was derived from Gauss＇ variation of parameters equations.Then,we proposed that binormal acceleration could be used to realize Sun synchronous orbit,and radial or transverse acceleration could be adopted to eliminate the rotation of the argument of the perigee.Finally,amending methods on the control strategies mentioned above were presented to eliminate the residual secular growth.Simulation results showed that the control strategies illustrated in this paper could realize Sun synchronous frozen orbit with arbitrary orbital elements,and can save much more energy than the schemes presented in previous studies,and have no side effect on other orbital parameters＇ secular motion.
文摘针对汽轮机叶片在工作中诸多参数的不确定性,通过建立叶片的力学模型,将随机有限元和一次二阶矩法相结合,对其进行了可靠度计算,并将随机有限元法的计算结果与解析法和 Monte Carlo 法进行了比较,证明了随机有限元法的正确性。对叶片的可靠度分析表明:当不能用解析法得到载荷响应,且载荷响应的概率密度函数无法得到时,采用随机有限元— 一次二阶矩法对结构进行可靠性分析是一种便捷方法。
