The use of operating microscopes is limited by the focal length.Surgeons using these instruments cannot simultaneously view and access the surgical field and must choose one or the other.The longer focal length （more...The use of operating microscopes is limited by the focal length.Surgeons using these instruments cannot simultaneously view and access the surgical field and must choose one or the other.The longer focal length （more than 1 000 mm） of an operating telescope permits a position away from the operating field,above the surgeon and out of the field of view.This gives the telescope an advantage over an operating microscope.We developed a telescopic system using screen-imaging guidance and a modified portable video macroscope constructed from a Computar MLH-10 × macro lens,a DFK-21AU04 USB CCD Camera and a Dell laptop computer as monitor screen.This system was used to establish a middle cerebral artery occlusion model in rats.Results showed that magnification of the modified portable video macroscope was appropriate （5-20 ×） even though the Computar MLH-10 × macro lens was placed 800 mm away from the operating field rather than at the specified working distance of 152.4 mm with a zoom of 1-40 ×.The screen-imaging telescopic technique was clear,life-like,stereoscopic and matched the actual operation.Screen-imaging guidance led to an accurate,smooth,minimally invasive and comparatively easy surgical procedure.Success rate of the model establishment evaluated by neurological function using the modified neurological score system was 74.07%.There was no significant difference in model establishment time,sensorimotor deficit and infarct volume percentage.Our findings indicate that the telescopic lens is effective in the screen surgical operation mode referred to as ＂long distance observation and short distance operation＂ and that screen-imaging guidance using an modified portable video macroscope can be utilized for the establishment of a middle cerebral artery occlusion model and micro-neurosurgery.展开更多
The local structure and thermophysical behavior of Mg-La liquid alloys were in-depth understood using deep potential molecular dynamic(DPMD) simulation driven via machine learning to promote the development of Mg-La a...The local structure and thermophysical behavior of Mg-La liquid alloys were in-depth understood using deep potential molecular dynamic(DPMD) simulation driven via machine learning to promote the development of Mg-La alloys. The robustness of the trained deep potential(DP) model was thoroughly evaluated through several aspects, including root-mean-square errors(RMSEs), energy and force data, and structural information comparison results;the results indicate the carefully trained DP model is reliable. The component and temperature dependence of the local structure in the Mg-La liquid alloy was analyzed. The effect of Mg content in the system on the first coordination shell of the atomic pairs is the same as that of temperature. The pre-peak demonstrated in the structure factor indicates the presence of a medium-range ordered structure in the Mg-La liquid alloy, which is particularly pronounced in the 80at% Mg system and disappears at elevated temperatures. The density, self-diffusion coefficient, and shear viscosity for the Mg-La liquid alloy were predicted via DPMD simulation, the evolution patterns with Mg content and temperature were subsequently discussed, and a database was established accordingly. Finally, the mixing enthalpy and elemental activity of the Mg-La liquid alloy at 1200 K were reliably evaluated,which provides new guidance for related studies.展开更多
The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclea...The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.展开更多
The gasification behaviors of coke were investigated under conditions simulating a hydrogen-rich blast furnace atmosphere,composed of N_(2),CO,CO_(2),H_(2),and H_(2)O.Systematic experimental studies were conducted to ...The gasification behaviors of coke were investigated under conditions simulating a hydrogen-rich blast furnace atmosphere,composed of N_(2),CO,CO_(2),H_(2),and H_(2)O.Systematic experimental studies were conducted to examine the effects of gasification temperature and H_(2)O content on the microstructural and macroscopic properties of coke.The results indicated that increasing temperature and H_(2)O content enhanced the gasification and dissolution loss of coke,with temperature having a more significant impact.Pore structure analysis of the gasified coke revealed that small pores and micropores predominated at 900 and 1000℃.However,at gasification temperatures above 1100℃,oversized holes formed,some of which extended into the coke's interior.The compressive strength of the coke was also assessed,showing that higher gasification temperatures or increased H_(2)O content reduced this property.This reduction is primarily due to the increased coke porosity and the degradation of the pore wall structure.X-ray diffraction analysis results suggested that higher gasification temperatures and H2O content could improve the degree of order in the carbon microcrystals of the gasified coke.展开更多
The effects of internals on liquid mixing and gas-liquid mass transfer have rarely been investigated in bubble columns,and the commonly used measurement method overestimates significantly overall gas holdup.Firstly,ga...The effects of internals on liquid mixing and gas-liquid mass transfer have rarely been investigated in bubble columns,and the commonly used measurement method overestimates significantly overall gas holdup.Firstly,gas holdup measurement method is improved by conducting multi-point liquid level measurement and using net fluid volume instead of bed volume to calculate gas holdup.Then,a stable conductivity method for liquid macromixing has been established by shielding large bubbles using#16nylon mesh.Subsequently,the influences of internal coverage(=12.6%,18.9% and 25.1%) on macroscopic fluid dynamics in a bubble column with a free wall area are systematically investigated.It is found that the presence of internals has a notable effect on macroscopic fluid dynamics.The overall gas holdup and gas-liquid volumetric mass transfer coefficient decrease,and the macromixing time decreases with the increase of internal cross-sectional area coverage.These are mainly caused by the uneven distribution of airflow due to the low resistance in the free wall area.This design makes maintenance easier,but in reality,the reactor performance has decreased.Further improvements will be made to the reactor performance based on such a configuration through flow guidance using baffles.展开更多
Persistently high arsenic levels in drinkingwater threaten underprivileged areas worldwide.Although nanomaterials exhibit exceptional arsenic removal properties,their implementation presents challenges.We converted N-...Persistently high arsenic levels in drinkingwater threaten underprivileged areas worldwide.Although nanomaterials exhibit exceptional arsenic removal properties,their implementation presents challenges.We converted N-methylimidazole-modified polyvinyl chloride into a granular anion exchange resin(PNAXRs)using an environmentally friendly and gentle synthesis method.Additionally,a unified approach for embedding nanomaterials within these resins was proposed,yielding a TiO_(2) composite resin(TiO_(2)@PNAXRs).Structural characterization confirmed the successful grafting of imidazolium cations with anion-exchange properties onto polyvinyl chloride side chains.BET analysis indicates a high specific surface area of 70.31 m^(2)/g for the PNAXRs.TGA curves demonstrate the successful encapsulation of approximately 24.9%TiO_(2) within the composite resin.The SEM-EDS results show a uniform distribution of TiO_(2) in the PNAXRs,which facilitates the effective utilization of TiO_(2).Adsorption experiments in conjunction with XPS analysis provided insights into the dual role of inner-sphere complexation and ion exchange in the adsorption mechanism of As(V)by TiO_(2)@PNAXRs.In dynamic adsorption tests utilizing high-As(V)groundwater from the Datong Basin as the influent,TiO_(2)@PNAXRs demonstrated the ability to produce effluents that meet the World Health Organization’s recommended limit for arsenic in drinking water,with a capacity of 1780 bed volumes.These findings support the use of PNAXRs as ideal matrices for TiO_(2) and their practical application in As(V)removal processes.展开更多
Road traffic flow forecasting provides critical information for the operational management of road mobility challenges, and models are used to generate the forecast. This paper uses a random process to present a novel...Road traffic flow forecasting provides critical information for the operational management of road mobility challenges, and models are used to generate the forecast. This paper uses a random process to present a novel traffic modelling framework for aggregate traffic on urban roads. The main idea is that road traffic flow is random, even for the recurrent flow, such as rush hour traffic, which is predisposed to congestion. Therefore, the structure of the aggregate traffic flow model for urban roads should correlate well with the essential variables of the observed random dynamics of the traffic flow phenomena. The novelty of this paper is the developed framework, based on the Poisson process, the kinematics of urban road traffic flow, and the intermediate modelling approach, which were combined to formulate the model. Empirical data from an urban road in Ghana was used to explore the model’s fidelity. The results show that the distribution from the model correlates well with that of the empirical traffic, providing a strong validation of the new framework and instilling confidence in its potential for significantly improved forecasts and, hence, a more hopeful outlook for real-world traffic management.展开更多
Over the past several decades,much research effort has been dedicated to the study of optical windows,with two primary themes emerging as key focuses.The first of these centers on investigating the optical properties ...Over the past several decades,much research effort has been dedicated to the study of optical windows,with two primary themes emerging as key focuses.The first of these centers on investigating the optical properties of typical transparent single crystals under shock or ramp compression,which helps in the selection of appropriate optical windows for high-pressure experiments.The second involves the exploration of novel optical windows,particularly transparent polycrystalline ceramics,which not only match the shock impedance of the samples,but also preserve transparency under dynamic compression.In this study,we first integrate existing research on the evolution of optical properties in transparent single crystals and polycrystalline ceramics subjected to shock or ramp loading,proposing a mechanism that links mesoscopic damage to macroscopic optical transparency.Subsequently,through a systematic integration of experiments and computational analyses on polycrystalline transparent ceramics,we demonstrate that shock transparency can be enhanced by optimizing grain size and that shock impedance can be designed via compositional tuning.Notably,our results reveal that nano-grained MgAl_(2)O_(4) ceramics exhibit outstanding optical transparency under high shock pressures,highlighting a promising strategy for designing optical windows that retain transparency under extreme dynamic loading conditions.展开更多
The influence of thermal damage on macroscopic and microscopic characteristics of different rocks has received much attention in the field of rock engineering.When the rocks are subjected to thermal treatment,the chan...The influence of thermal damage on macroscopic and microscopic characteristics of different rocks has received much attention in the field of rock engineering.When the rocks are subjected to thermal treatment,the change of macroscopic characteristics and evolution of micro-structure would be induced,ultimately resulting in different degrees of thermal damage in rocks.To better understand the thermal damage mechanism of different rocks and its effect on the rock performance,this study reviews a large number of test results of rock specimens experiencing heating and cooling treatment in the laboratory.Firstly,the variations of macroscopic behaviors,including physical parameters,mechanical parameters,thermal conductivity and permeability,are examined.The variations of mechanical parameters with thermal treatment variables(i.e.temperature or the number of thermal cycles)are divided into four types.Secondly,several measuring methods for microstructure,such as polarizing microscopy,fluorescent method,scanning electron microscopy(SEM),X-ray computerized tomography(CT),acoustic emission(AE)and ultrasonic technique,are introduced.Furthermore,the effect of thermal damage on the mechanical parameters of rocks in response to different thermal treatments,involving temperature magnitude,cooling method and thermal cycle,are discussed.Finally,the limitations and prospects for the research of rock thermal damage are proposed.展开更多
Sintered silver nanoparticles(AgNPs)arewidely used in high-power electronics due to their exceptional properties.However,the material reliability is significantly affected by various microscopic defects.In this work,t...Sintered silver nanoparticles(AgNPs)arewidely used in high-power electronics due to their exceptional properties.However,the material reliability is significantly affected by various microscopic defects.In this work,the three primary micro-defect types at potential stress concentrations in sintered AgNPs are identified,categorized,and quantified.Molecular dynamics(MD)simulations are employed to observe the failure evolution of different microscopic defects.The dominant mechanisms responsible for this evolution are dislocation nucleation and dislocation motion.At the same time,this paper clarifies the quantitative relationship between the tensile strain amount and the failure mechanism transitions of the three defect types by defining key strain points.The impact of defect types on the failure process is also discussed.Furthermore,traction-separation curves extracted from microscopic defect evolutions serve as a bridge to connect the macro-scale model.The validity of the crack propagation model is confirmed through tensile tests.Finally,we thoroughly analyze how micro-defect types influence macro-crack propagation and attempt to find supporting evidence from the MD model.Our findings provide a multi-perspective reference for the reliability analysis of sintered AgNPs.展开更多
The emergence of connected and automated vehicles(CAV)indicates improved traffic mobility in future traffic transportation systems.This study addresses the research gap in macroscopic traffic modeling of mixed traffic...The emergence of connected and automated vehicles(CAV)indicates improved traffic mobility in future traffic transportation systems.This study addresses the research gap in macroscopic traffic modeling of mixed traffic networks where CAV and human-driven vehicles coexist.CAV behavior is explicitly included in the proposed traffic network model,and the vehicle number non-conservation problem is overcome by describing the approaching and departure vehicle number in discrete time.The proposed model is verified in typical CAV cooperation scenarios.The performance of CAV coordination is analyzed in road,intersection and network scenario.Total travel time of the vehicles in the network is proved to be reduced when coordination is applied.Simulation results validate the accuracy of the proposed model and the effectiveness of the proposed algorithm.展开更多
During the operation of sandy railways, the challenge posed by wind-blown sand is a persistent issue. An in-depth study on the influence of wind-blown sand content on the macroscopic and microscopic mechanical propert...During the operation of sandy railways, the challenge posed by wind-blown sand is a persistent issue. An in-depth study on the influence of wind-blown sand content on the macroscopic and microscopic mechanical properties of the ballast bed is of great significance for understanding the potential problems of sandy railways and proposing reasonable and adequate maintenance and repair strategies. Building upon existing research, this study proposes a new assessment indicator for sand content. Utilizing the discrete element method(DEM) and fully considering the complex interactions between ballast and sand particles, three-dimensional(3D) multi-scale analysis models of sandy ballast beds with different wind-blown sand contents are established and validated through field experiments. The effects of varying wind-blown sand content on the microscopic contact distribution and macroscopic mechanical behavior(such as resistance and support stiffness) of ballast beds are carefully analyzed. The results show that with the increase in sand content, the average contact force and coordination number between ballast particles gradually decrease, and the disparity in contact forces between different layers of the ballast bed diminishes. The longitudinal and lateral resistance of the ballast bed initially decreases and then increases, with a critical point at 10% sand content. At 15% sand content, the lateral resistance is mainly shared by the ballast shoulder. The longitudinal resistance sharing ratio is always the largest on the sleeper side, followed by that at the sleeper bottom, and the smallest on the ballast shoulder. When the sand content exceeds 10%, the contribution of sand particles to stiffness significantly increases, leading to an accelerated growth rate of the overall support stiffness of the ballast bed, which is highly detrimental to the long-term service performance of the ballast bed. In conclusion, it is recommended that maintenance and repair operations should be promptly conducted when the sand content of the ballast bed reaches or exceeds 10%.展开更多
BACKGROUND The concept of macroscopic on-site evaluation(MOSE)was introduced in 2015 when the endoscopist observed better diagnostic yield when the macroscopically visible core on MOSE was superior to 4 mm.Recent stud...BACKGROUND The concept of macroscopic on-site evaluation(MOSE)was introduced in 2015 when the endoscopist observed better diagnostic yield when the macroscopically visible core on MOSE was superior to 4 mm.Recent studies suggest that MOSE by the endoscopist may be an excellent alternative to rapid on-site evaluation,and some classi-fications have been published.Few studies have assessed the adequacy of histologic cores in MOSE during endoscopic ultrasound-guided fine-needle aspiration/biopsy(EUS-FNA/FNB).AIM To evaluate the performance of MOSE during EUS-FNA/FNB.METHODS This multicentric prospective study was conducted in 16 centers in 3 countries(Egypt,Iraq,and Morocco)and included 1108 patients with pancreatic,biliary,or gastrointestinal pathology who were referred for EUS examination.We prospectively analyzed the MOSE in 1008 patients with available histopathological reports according to 2 classifications to determine the adequacy of the histological core samples.Data management and analysis were performed using a Statistical Package for Social Sciences(SPSS)version 27.RESULTS A total of 1074 solid lesions were biopsied in 1008 patients with available cytopathological reports.Mean age was 59 years,and 509 patients(50.5%)were male.The mean lesion size was 38 mm.The most frequently utilized needles were FNB-Franseen(74.5%)and 22 G(93.4%),with a median of 2 passes.According to 2 classifications,618 non-bloody cores(61.3%)and 964 good samples(95.6%)were adequate for histological evaluation.The overall diagnostic yield of cytopathology was 95.5%.The cytological examination confirmed the diagnosis of malignancy in 861 patients(85.4%),while 45 samples(4.5%)were inconclusive.Post-procedural adverse events occurred in 33 patients(3.3%).Statistical analysis showed a difference between needle types(P=0.035)with a high sensitivity of FNB(97%).The analysis of the relationship between the MOSE-score and the final diagnosis showed a significant difference between the different scores of the MOSE(P<0.001).CONCLUSION MOSE is a simple method that allows endoscopists to increase needle passes to improve sample quality.There is significantly higher FNB sensitivity and cytopathology diagnostic yield with good MOSE cores.展开更多
Elementary information theory is used to model cybersecurity complexity, where the model assumes that security risk management is a binomial stochastic process. Complexity is shown to increase exponentially with the n...Elementary information theory is used to model cybersecurity complexity, where the model assumes that security risk management is a binomial stochastic process. Complexity is shown to increase exponentially with the number of vulnerabilities in combination with security risk management entropy. However, vulnerabilities can be either local or non-local, where the former is confined to networked elements and the latter results from interactions between elements. Furthermore, interactions involve multiple methods of communication, where each method can contain vulnerabilities specific to that method. Importantly, the number of possible interactions scales quadratically with the number of elements in standard network topologies. Minimizing these interactions can significantly reduce the number of vulnerabilities and the accompanying complexity. Two network configurations that yield sub-quadratic and linear scaling relations are presented.展开更多
Background: Rivaroxaban is a directly acting, oral anti-coagulant (factor Xa inhibitor) which is used to treat and prevent the formation of blood clots. A common side effect of this drug is an increase in bleeding ten...Background: Rivaroxaban is a directly acting, oral anti-coagulant (factor Xa inhibitor) which is used to treat and prevent the formation of blood clots. A common side effect of this drug is an increase in bleeding tendencies, which can potentially lead to macroscopic hematuria. However, it is important to note that macroscopic hematuria can appear in several other conditions including urological malignancies. The Case: We report a case of a 69-year-old male patient with a history of myocardial infarction undergoing long term Rivaroxaban therapy, presenting with macroscopic hematuria and frequent urination. The clinical history and presenting symptoms were consistent with the side effects of prolonged use of Rivaroxaban, but further investigations revealed the presence of a tumor in the bladder which was instead found to be the cause of macroscopic hematuria. The conclusion: Although macroscopic hematuria is a very common side effect of Rivaroxaban therapy, it is important to consider other conditions which can present with the same symptoms.展开更多
This study uses the PΔV term in the ideal gas equation PΔV = nRΔT to show how the 1-degree temperature increase that expands the occupied volume of a gas by ΔV against constant pressure P also causes the system to...This study uses the PΔV term in the ideal gas equation PΔV = nRΔT to show how the 1-degree temperature increase that expands the occupied volume of a gas by ΔV against constant pressure P also causes the system to increase its entropy by ΔS. As the volume available to a gas sample increases, the locations for disordered molecular relocation also increase. The causal agent linking a volume increase ΔV and an entropy increase ΔS is absolute temperature T measured in kelvin units. Since a volume increase is empirically observable while an increase in randomized molecular disorder is not, a per-kelvin increase in gas volume provides a method for estimating entropy increase. Both volume and entropy are extensive variables dependent upon the number of molecules in the system. Both are deemed to be at their absolute minima at the absolute zero of temperature. This study provides an insight into how a per-kelvin temperature increase causes both a linear increase in gas volume and a linear increase in gas entropy. When people talk about randomized disorder without specifying absolute temperature and molecule-count for the system, they are discussing a concept other than thermodynamic entropy.展开更多
In gas injection refining processes,wide dispersion of small bubbles in the bath is indispensable for high refining efficiency.Eccentric mechanical stirring with unidirectional impeller rotation was tested using a wat...In gas injection refining processes,wide dispersion of small bubbles in the bath is indispensable for high refining efficiency.Eccentric mechanical stirring with unidirectional impeller rotation was tested using a water model for pursuing better bubble disintegration and dispersion.Effects of various factors on bubble disintegration and dispersion were investigated.These factors were stirring mode,eccentricity and rotation speed,nozzle structure,nozzle immersion depth,and gas flow rate.Gas injection from a nozzle at the end of the impeller shaft and from an immersed lance was studied.Under eccentric stirring,a vortex was formed away from the shaft.Small bubbles were produced in the strong turbulence or high shear stress field near the rotating impeller and moved in the direction to the vortex keeping up with the macroscopic flow induced by the mechanical stirring.Thus small bubbles could disperse widely in the bath under eccentric stirring with unidirectional rotation.展开更多
The macroscopic fundamental diagram（ MFD） is studied to obtain the aggregate behavior of traffic in cities. This paper investigates the existence and the characteristics of different types of daily MFD for the Shang...The macroscopic fundamental diagram（ MFD） is studied to obtain the aggregate behavior of traffic in cities. This paper investigates the existence and the characteristics of different types of daily MFD for the Shanghai urban expressway network. The existence of MFD in the Shanghai urban expressway network is proved based on two weeks＇ data.Moreover, the hysteresis phenomena is present in most days and the network exhibits different hysteresis loops under different traffic situations. The relationship between the hysteresis phenomena and the inhomogeneity of traffic distribution is verified. The MFDs in the years of 2009 and 2012 are compared. The hysteresis loop still exists in 2012, which further verifies the existence of the hysteresis phenomenon. The direct relationship between the length of the hysteresis loop（ ΔO） and the congestion is proved based on sufficient data. The width of the hysteresis loop, i. e., the drop in network flow（ ΔQ） has no relationship with the congestion, and it varies from day to day under different traffic situations.展开更多
The conventional measurement of a relative permeability curve (RPC) is usually conducted at room temperature, which is much lower than the reservoir temperature. Previous research work on high temperature relative...The conventional measurement of a relative permeability curve (RPC) is usually conducted at room temperature, which is much lower than the reservoir temperature. Previous research work on high temperature relative permeability mainly take oil-wetted cores as objective. In this paper, laboratory test and measurement are conducted using water-wet cores from the Lunnan Oilfield. Since irreducible water saturation (Swi) is a critical factor that affects and controls the relative permeability curve, special tests are conducted to measure Swi at different temperatures for water-wet cores in the course of the experiment of relative permeability. The experimental results indicate that for the water-wet cores Swi decreased with the increasing temperature from ambient to 105℃,and the relative permeability curve shifted in a low water saturation direction, i.e. moved toward the left, while it moved toward the right for oil wetness reservoirs. Seen from both macroscopic and microcosmic view, the reasons and mechanisms of relative permeability change with temperature are discussed, and factors including core wetness, viscosity force, capillary forces, contact angle, interfacial tension change are considered.展开更多
A systematic investigation is made on the problems which are related to the optimal control of the municipal water distribution network.A mathematical model of forecasting the water short term demand is proposed using...A systematic investigation is made on the problems which are related to the optimal control of the municipal water distribution network.A mathematical model of forecasting the water short term demand is proposed using the time series trigonometric function analysis method;the service discharge based macroscopic model of network performance is established using the network structuring method;a relatively satisfactory mathematical model for the optimal control of water distribution network is put forward in view of security and economy,and solved by the constrained mixed discrete variable complex arithmetic.The model is applied in many examples and the results are satisfactory.展开更多
文摘The use of operating microscopes is limited by the focal length.Surgeons using these instruments cannot simultaneously view and access the surgical field and must choose one or the other.The longer focal length （more than 1 000 mm） of an operating telescope permits a position away from the operating field,above the surgeon and out of the field of view.This gives the telescope an advantage over an operating microscope.We developed a telescopic system using screen-imaging guidance and a modified portable video macroscope constructed from a Computar MLH-10 × macro lens,a DFK-21AU04 USB CCD Camera and a Dell laptop computer as monitor screen.This system was used to establish a middle cerebral artery occlusion model in rats.Results showed that magnification of the modified portable video macroscope was appropriate （5-20 ×） even though the Computar MLH-10 × macro lens was placed 800 mm away from the operating field rather than at the specified working distance of 152.4 mm with a zoom of 1-40 ×.The screen-imaging telescopic technique was clear,life-like,stereoscopic and matched the actual operation.Screen-imaging guidance led to an accurate,smooth,minimally invasive and comparatively easy surgical procedure.Success rate of the model establishment evaluated by neurological function using the modified neurological score system was 74.07%.There was no significant difference in model establishment time,sensorimotor deficit and infarct volume percentage.Our findings indicate that the telescopic lens is effective in the screen surgical operation mode referred to as ＂long distance observation and short distance operation＂ and that screen-imaging guidance using an modified portable video macroscope can be utilized for the establishment of a middle cerebral artery occlusion model and micro-neurosurgery.
基金financially supported by the National Key R &D Program of China (No.2022YFB3709300)。
文摘The local structure and thermophysical behavior of Mg-La liquid alloys were in-depth understood using deep potential molecular dynamic(DPMD) simulation driven via machine learning to promote the development of Mg-La alloys. The robustness of the trained deep potential(DP) model was thoroughly evaluated through several aspects, including root-mean-square errors(RMSEs), energy and force data, and structural information comparison results;the results indicate the carefully trained DP model is reliable. The component and temperature dependence of the local structure in the Mg-La liquid alloy was analyzed. The effect of Mg content in the system on the first coordination shell of the atomic pairs is the same as that of temperature. The pre-peak demonstrated in the structure factor indicates the presence of a medium-range ordered structure in the Mg-La liquid alloy, which is particularly pronounced in the 80at% Mg system and disappears at elevated temperatures. The density, self-diffusion coefficient, and shear viscosity for the Mg-La liquid alloy were predicted via DPMD simulation, the evolution patterns with Mg content and temperature were subsequently discussed, and a database was established accordingly. Finally, the mixing enthalpy and elemental activity of the Mg-La liquid alloy at 1200 K were reliably evaluated,which provides new guidance for related studies.
基金National Natural Science Foundation of China(12135008,12132005)。
文摘The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.
基金the financial support provided by the National Natural Science Foundation of China(Nos.52174300 and 52404340)Natural Science Foundation of Chongqing,China(No.cstc2020jcyj-msxmX0583)+2 种基金Research Foundation of Chongqing University of Science and Technology(No.ckrc20240612)Chongqing Talent Plan Project(cstc2021ycjh-bgzxm0211)Chongqing Doctoral“Through Train”Project(No.sl202100000343).
文摘The gasification behaviors of coke were investigated under conditions simulating a hydrogen-rich blast furnace atmosphere,composed of N_(2),CO,CO_(2),H_(2),and H_(2)O.Systematic experimental studies were conducted to examine the effects of gasification temperature and H_(2)O content on the microstructural and macroscopic properties of coke.The results indicated that increasing temperature and H_(2)O content enhanced the gasification and dissolution loss of coke,with temperature having a more significant impact.Pore structure analysis of the gasified coke revealed that small pores and micropores predominated at 900 and 1000℃.However,at gasification temperatures above 1100℃,oversized holes formed,some of which extended into the coke's interior.The compressive strength of the coke was also assessed,showing that higher gasification temperatures or increased H_(2)O content reduced this property.This reduction is primarily due to the increased coke porosity and the degradation of the pore wall structure.X-ray diffraction analysis results suggested that higher gasification temperatures and H2O content could improve the degree of order in the carbon microcrystals of the gasified coke.
基金National Natural Science Foundation of China(22178228,22378271)are gratefully acknowledged。
文摘The effects of internals on liquid mixing and gas-liquid mass transfer have rarely been investigated in bubble columns,and the commonly used measurement method overestimates significantly overall gas holdup.Firstly,gas holdup measurement method is improved by conducting multi-point liquid level measurement and using net fluid volume instead of bed volume to calculate gas holdup.Then,a stable conductivity method for liquid macromixing has been established by shielding large bubbles using#16nylon mesh.Subsequently,the influences of internal coverage(=12.6%,18.9% and 25.1%) on macroscopic fluid dynamics in a bubble column with a free wall area are systematically investigated.It is found that the presence of internals has a notable effect on macroscopic fluid dynamics.The overall gas holdup and gas-liquid volumetric mass transfer coefficient decrease,and the macromixing time decreases with the increase of internal cross-sectional area coverage.These are mainly caused by the uneven distribution of airflow due to the low resistance in the free wall area.This design makes maintenance easier,but in reality,the reactor performance has decreased.Further improvements will be made to the reactor performance based on such a configuration through flow guidance using baffles.
基金supported by the Key Research and Development Plan of Zhejiang Province(No.2021C03176)the National Key Research and Development Program of China(No.2022YFC3703700).
文摘Persistently high arsenic levels in drinkingwater threaten underprivileged areas worldwide.Although nanomaterials exhibit exceptional arsenic removal properties,their implementation presents challenges.We converted N-methylimidazole-modified polyvinyl chloride into a granular anion exchange resin(PNAXRs)using an environmentally friendly and gentle synthesis method.Additionally,a unified approach for embedding nanomaterials within these resins was proposed,yielding a TiO_(2) composite resin(TiO_(2)@PNAXRs).Structural characterization confirmed the successful grafting of imidazolium cations with anion-exchange properties onto polyvinyl chloride side chains.BET analysis indicates a high specific surface area of 70.31 m^(2)/g for the PNAXRs.TGA curves demonstrate the successful encapsulation of approximately 24.9%TiO_(2) within the composite resin.The SEM-EDS results show a uniform distribution of TiO_(2) in the PNAXRs,which facilitates the effective utilization of TiO_(2).Adsorption experiments in conjunction with XPS analysis provided insights into the dual role of inner-sphere complexation and ion exchange in the adsorption mechanism of As(V)by TiO_(2)@PNAXRs.In dynamic adsorption tests utilizing high-As(V)groundwater from the Datong Basin as the influent,TiO_(2)@PNAXRs demonstrated the ability to produce effluents that meet the World Health Organization’s recommended limit for arsenic in drinking water,with a capacity of 1780 bed volumes.These findings support the use of PNAXRs as ideal matrices for TiO_(2) and their practical application in As(V)removal processes.
文摘Road traffic flow forecasting provides critical information for the operational management of road mobility challenges, and models are used to generate the forecast. This paper uses a random process to present a novel traffic modelling framework for aggregate traffic on urban roads. The main idea is that road traffic flow is random, even for the recurrent flow, such as rush hour traffic, which is predisposed to congestion. Therefore, the structure of the aggregate traffic flow model for urban roads should correlate well with the essential variables of the observed random dynamics of the traffic flow phenomena. The novelty of this paper is the developed framework, based on the Poisson process, the kinematics of urban road traffic flow, and the intermediate modelling approach, which were combined to formulate the model. Empirical data from an urban road in Ghana was used to explore the model’s fidelity. The results show that the distribution from the model correlates well with that of the empirical traffic, providing a strong validation of the new framework and instilling confidence in its potential for significantly improved forecasts and, hence, a more hopeful outlook for real-world traffic management.
基金financially supported by the National Natural Science Foundation of China(Grant No.11872344)the Innovatory Development Foundation of the China Academy of Engineering Physics(Grant No.CX20210026).
文摘Over the past several decades,much research effort has been dedicated to the study of optical windows,with two primary themes emerging as key focuses.The first of these centers on investigating the optical properties of typical transparent single crystals under shock or ramp compression,which helps in the selection of appropriate optical windows for high-pressure experiments.The second involves the exploration of novel optical windows,particularly transparent polycrystalline ceramics,which not only match the shock impedance of the samples,but also preserve transparency under dynamic compression.In this study,we first integrate existing research on the evolution of optical properties in transparent single crystals and polycrystalline ceramics subjected to shock or ramp loading,proposing a mechanism that links mesoscopic damage to macroscopic optical transparency.Subsequently,through a systematic integration of experiments and computational analyses on polycrystalline transparent ceramics,we demonstrate that shock transparency can be enhanced by optimizing grain size and that shock impedance can be designed via compositional tuning.Notably,our results reveal that nano-grained MgAl_(2)O_(4) ceramics exhibit outstanding optical transparency under high shock pressures,highlighting a promising strategy for designing optical windows that retain transparency under extreme dynamic loading conditions.
基金supported by the National Key Research and Development Plan(Grant No.2022YFC2905700)Natural Science Foundation of Anhui Province(Grant No.2208085ME120)Key Research and Development Plan of Anhui Province(Grant No.2022m07020001).
文摘The influence of thermal damage on macroscopic and microscopic characteristics of different rocks has received much attention in the field of rock engineering.When the rocks are subjected to thermal treatment,the change of macroscopic characteristics and evolution of micro-structure would be induced,ultimately resulting in different degrees of thermal damage in rocks.To better understand the thermal damage mechanism of different rocks and its effect on the rock performance,this study reviews a large number of test results of rock specimens experiencing heating and cooling treatment in the laboratory.Firstly,the variations of macroscopic behaviors,including physical parameters,mechanical parameters,thermal conductivity and permeability,are examined.The variations of mechanical parameters with thermal treatment variables(i.e.temperature or the number of thermal cycles)are divided into four types.Secondly,several measuring methods for microstructure,such as polarizing microscopy,fluorescent method,scanning electron microscopy(SEM),X-ray computerized tomography(CT),acoustic emission(AE)and ultrasonic technique,are introduced.Furthermore,the effect of thermal damage on the mechanical parameters of rocks in response to different thermal treatments,involving temperature magnitude,cooling method and thermal cycle,are discussed.Finally,the limitations and prospects for the research of rock thermal damage are proposed.
基金supported by the China Scholarship Council (CSC) (No.202206020149)the Academic Excellence Foundation of BUAA for PhD Students,the Funding Project of Science and Technology on Reliability and Environmental Engineering Laboratory (No.6142004210106).
文摘Sintered silver nanoparticles(AgNPs)arewidely used in high-power electronics due to their exceptional properties.However,the material reliability is significantly affected by various microscopic defects.In this work,the three primary micro-defect types at potential stress concentrations in sintered AgNPs are identified,categorized,and quantified.Molecular dynamics(MD)simulations are employed to observe the failure evolution of different microscopic defects.The dominant mechanisms responsible for this evolution are dislocation nucleation and dislocation motion.At the same time,this paper clarifies the quantitative relationship between the tensile strain amount and the failure mechanism transitions of the three defect types by defining key strain points.The impact of defect types on the failure process is also discussed.Furthermore,traction-separation curves extracted from microscopic defect evolutions serve as a bridge to connect the macro-scale model.The validity of the crack propagation model is confirmed through tensile tests.Finally,we thoroughly analyze how micro-defect types influence macro-crack propagation and attempt to find supporting evidence from the MD model.Our findings provide a multi-perspective reference for the reliability analysis of sintered AgNPs.
基金Supported by National Natural Science Foundation of China(Grant Nos.52072212,52302410)China Postdoctoral Science Foundation(Grant No,2024T170489)+3 种基金Postdoctoral Fellowship Program of CPSF(Grant No.GZB20230354)Research and Development of Autonomous Driving Domain Controller and Its Algorithm(Grant No.2023Z070)Young Elite Scientists Sponsorship Program by CHINA-SAEShuimu Tsinghua Scholarship。
文摘The emergence of connected and automated vehicles(CAV)indicates improved traffic mobility in future traffic transportation systems.This study addresses the research gap in macroscopic traffic modeling of mixed traffic networks where CAV and human-driven vehicles coexist.CAV behavior is explicitly included in the proposed traffic network model,and the vehicle number non-conservation problem is overcome by describing the approaching and departure vehicle number in discrete time.The proposed model is verified in typical CAV cooperation scenarios.The performance of CAV coordination is analyzed in road,intersection and network scenario.Total travel time of the vehicles in the network is proved to be reduced when coordination is applied.Simulation results validate the accuracy of the proposed model and the effectiveness of the proposed algorithm.
基金supported by the National Natural Science Foundation of China (Grant No. 52372425)the Fundamental Research Funds for the Central Universities (Science and Technology Leading Talent Team Poject) Grant No. 2022JBXT010。
文摘During the operation of sandy railways, the challenge posed by wind-blown sand is a persistent issue. An in-depth study on the influence of wind-blown sand content on the macroscopic and microscopic mechanical properties of the ballast bed is of great significance for understanding the potential problems of sandy railways and proposing reasonable and adequate maintenance and repair strategies. Building upon existing research, this study proposes a new assessment indicator for sand content. Utilizing the discrete element method(DEM) and fully considering the complex interactions between ballast and sand particles, three-dimensional(3D) multi-scale analysis models of sandy ballast beds with different wind-blown sand contents are established and validated through field experiments. The effects of varying wind-blown sand content on the microscopic contact distribution and macroscopic mechanical behavior(such as resistance and support stiffness) of ballast beds are carefully analyzed. The results show that with the increase in sand content, the average contact force and coordination number between ballast particles gradually decrease, and the disparity in contact forces between different layers of the ballast bed diminishes. The longitudinal and lateral resistance of the ballast bed initially decreases and then increases, with a critical point at 10% sand content. At 15% sand content, the lateral resistance is mainly shared by the ballast shoulder. The longitudinal resistance sharing ratio is always the largest on the sleeper side, followed by that at the sleeper bottom, and the smallest on the ballast shoulder. When the sand content exceeds 10%, the contribution of sand particles to stiffness significantly increases, leading to an accelerated growth rate of the overall support stiffness of the ballast bed, which is highly detrimental to the long-term service performance of the ballast bed. In conclusion, it is recommended that maintenance and repair operations should be promptly conducted when the sand content of the ballast bed reaches or exceeds 10%.
文摘BACKGROUND The concept of macroscopic on-site evaluation(MOSE)was introduced in 2015 when the endoscopist observed better diagnostic yield when the macroscopically visible core on MOSE was superior to 4 mm.Recent studies suggest that MOSE by the endoscopist may be an excellent alternative to rapid on-site evaluation,and some classi-fications have been published.Few studies have assessed the adequacy of histologic cores in MOSE during endoscopic ultrasound-guided fine-needle aspiration/biopsy(EUS-FNA/FNB).AIM To evaluate the performance of MOSE during EUS-FNA/FNB.METHODS This multicentric prospective study was conducted in 16 centers in 3 countries(Egypt,Iraq,and Morocco)and included 1108 patients with pancreatic,biliary,or gastrointestinal pathology who were referred for EUS examination.We prospectively analyzed the MOSE in 1008 patients with available histopathological reports according to 2 classifications to determine the adequacy of the histological core samples.Data management and analysis were performed using a Statistical Package for Social Sciences(SPSS)version 27.RESULTS A total of 1074 solid lesions were biopsied in 1008 patients with available cytopathological reports.Mean age was 59 years,and 509 patients(50.5%)were male.The mean lesion size was 38 mm.The most frequently utilized needles were FNB-Franseen(74.5%)and 22 G(93.4%),with a median of 2 passes.According to 2 classifications,618 non-bloody cores(61.3%)and 964 good samples(95.6%)were adequate for histological evaluation.The overall diagnostic yield of cytopathology was 95.5%.The cytological examination confirmed the diagnosis of malignancy in 861 patients(85.4%),while 45 samples(4.5%)were inconclusive.Post-procedural adverse events occurred in 33 patients(3.3%).Statistical analysis showed a difference between needle types(P=0.035)with a high sensitivity of FNB(97%).The analysis of the relationship between the MOSE-score and the final diagnosis showed a significant difference between the different scores of the MOSE(P<0.001).CONCLUSION MOSE is a simple method that allows endoscopists to increase needle passes to improve sample quality.There is significantly higher FNB sensitivity and cytopathology diagnostic yield with good MOSE cores.
文摘Elementary information theory is used to model cybersecurity complexity, where the model assumes that security risk management is a binomial stochastic process. Complexity is shown to increase exponentially with the number of vulnerabilities in combination with security risk management entropy. However, vulnerabilities can be either local or non-local, where the former is confined to networked elements and the latter results from interactions between elements. Furthermore, interactions involve multiple methods of communication, where each method can contain vulnerabilities specific to that method. Importantly, the number of possible interactions scales quadratically with the number of elements in standard network topologies. Minimizing these interactions can significantly reduce the number of vulnerabilities and the accompanying complexity. Two network configurations that yield sub-quadratic and linear scaling relations are presented.
文摘Background: Rivaroxaban is a directly acting, oral anti-coagulant (factor Xa inhibitor) which is used to treat and prevent the formation of blood clots. A common side effect of this drug is an increase in bleeding tendencies, which can potentially lead to macroscopic hematuria. However, it is important to note that macroscopic hematuria can appear in several other conditions including urological malignancies. The Case: We report a case of a 69-year-old male patient with a history of myocardial infarction undergoing long term Rivaroxaban therapy, presenting with macroscopic hematuria and frequent urination. The clinical history and presenting symptoms were consistent with the side effects of prolonged use of Rivaroxaban, but further investigations revealed the presence of a tumor in the bladder which was instead found to be the cause of macroscopic hematuria. The conclusion: Although macroscopic hematuria is a very common side effect of Rivaroxaban therapy, it is important to consider other conditions which can present with the same symptoms.
文摘This study uses the PΔV term in the ideal gas equation PΔV = nRΔT to show how the 1-degree temperature increase that expands the occupied volume of a gas by ΔV against constant pressure P also causes the system to increase its entropy by ΔS. As the volume available to a gas sample increases, the locations for disordered molecular relocation also increase. The causal agent linking a volume increase ΔV and an entropy increase ΔS is absolute temperature T measured in kelvin units. Since a volume increase is empirically observable while an increase in randomized molecular disorder is not, a per-kelvin increase in gas volume provides a method for estimating entropy increase. Both volume and entropy are extensive variables dependent upon the number of molecules in the system. Both are deemed to be at their absolute minima at the absolute zero of temperature. This study provides an insight into how a per-kelvin temperature increase causes both a linear increase in gas volume and a linear increase in gas entropy. When people talk about randomized disorder without specifying absolute temperature and molecule-count for the system, they are discussing a concept other than thermodynamic entropy.
基金Projects (50974035,51074047) supported by the National Natural Science Foundation of ChinaProject (20090407) supported by the Doctoral Fund of Ministry of Education,ChinaProject (200921007) supported by Liaoning Key Science and Technology,China
文摘In gas injection refining processes,wide dispersion of small bubbles in the bath is indispensable for high refining efficiency.Eccentric mechanical stirring with unidirectional impeller rotation was tested using a water model for pursuing better bubble disintegration and dispersion.Effects of various factors on bubble disintegration and dispersion were investigated.These factors were stirring mode,eccentricity and rotation speed,nozzle structure,nozzle immersion depth,and gas flow rate.Gas injection from a nozzle at the end of the impeller shaft and from an immersed lance was studied.Under eccentric stirring,a vortex was formed away from the shaft.Small bubbles were produced in the strong turbulence or high shear stress field near the rotating impeller and moved in the direction to the vortex keeping up with the macroscopic flow induced by the mechanical stirring.Thus small bubbles could disperse widely in the bath under eccentric stirring with unidirectional rotation.
基金The National Natural Science Foundation of China(No.51238008)
文摘The macroscopic fundamental diagram（ MFD） is studied to obtain the aggregate behavior of traffic in cities. This paper investigates the existence and the characteristics of different types of daily MFD for the Shanghai urban expressway network. The existence of MFD in the Shanghai urban expressway network is proved based on two weeks＇ data.Moreover, the hysteresis phenomena is present in most days and the network exhibits different hysteresis loops under different traffic situations. The relationship between the hysteresis phenomena and the inhomogeneity of traffic distribution is verified. The MFDs in the years of 2009 and 2012 are compared. The hysteresis loop still exists in 2012, which further verifies the existence of the hysteresis phenomenon. The direct relationship between the length of the hysteresis loop（ ΔO） and the congestion is proved based on sufficient data. The width of the hysteresis loop, i. e., the drop in network flow（ ΔQ） has no relationship with the congestion, and it varies from day to day under different traffic situations.
文摘The conventional measurement of a relative permeability curve (RPC) is usually conducted at room temperature, which is much lower than the reservoir temperature. Previous research work on high temperature relative permeability mainly take oil-wetted cores as objective. In this paper, laboratory test and measurement are conducted using water-wet cores from the Lunnan Oilfield. Since irreducible water saturation (Swi) is a critical factor that affects and controls the relative permeability curve, special tests are conducted to measure Swi at different temperatures for water-wet cores in the course of the experiment of relative permeability. The experimental results indicate that for the water-wet cores Swi decreased with the increasing temperature from ambient to 105℃,and the relative permeability curve shifted in a low water saturation direction, i.e. moved toward the left, while it moved toward the right for oil wetness reservoirs. Seen from both macroscopic and microcosmic view, the reasons and mechanisms of relative permeability change with temperature are discussed, and factors including core wetness, viscosity force, capillary forces, contact angle, interfacial tension change are considered.
基金Foundation for University Key Teacher by the Min-istry of Education
文摘A systematic investigation is made on the problems which are related to the optimal control of the municipal water distribution network.A mathematical model of forecasting the water short term demand is proposed using the time series trigonometric function analysis method;the service discharge based macroscopic model of network performance is established using the network structuring method;a relatively satisfactory mathematical model for the optimal control of water distribution network is put forward in view of security and economy,and solved by the constrained mixed discrete variable complex arithmetic.The model is applied in many examples and the results are satisfactory.
