This study was conducted to further classify threshed strips, so as to broaden the usable range of raw material and facilitate the effective utilization of to- bacco resource. During the threshing and redwing process,...This study was conducted to further classify threshed strips, so as to broaden the usable range of raw material and facilitate the effective utilization of to- bacco resource. During the threshing and redwing process, various process param- eters including the rotating speeds of threshing drums of threshing machioe, draught fans and fling drums were scientifically and rationally set according to the actual quality of the raw material. According to the characteristic that strips with close in- herent quality have basically the same specific gravity and leaf thickness, the strips from each discharge hole were accurately evaluated, and classified, followed by redrying and packaging. The results showed that the threshing and separating pro- cedure could improve the separating effect and precision according to tobacco qual- ity, so as to satisfy the separation and classification requirements for tobacco.展开更多
Mechanical threshing used when preparing maize seeds for planting subjects seed to damage and reduces seed quality.The purpose of this study was to assess the effect of mechanical threshing on the quality of maize see...Mechanical threshing used when preparing maize seeds for planting subjects seed to damage and reduces seed quality.The purpose of this study was to assess the effect of mechanical threshing on the quality of maize seed threshed at different moisture contents(MCs).Seeds of dent maize JK968 and flint maize DD2 were threshed at 12,15,18,21,and 24% MC.The damage degree was determined by iodine staining,and seed vigor was assessed by standard germination(SG),cold test germination(CTG),accelerated aging germination(AAG),seedling emergence rate,and seedling root and shoot length.The results showed that the damage percentage increased,and the seed vigor parameters decreased with increasing seed MC during threshing in both cultivars.For obtaining high seed quality,indicated by at least 90,85,and 80% of SG,AAG,and CTG,respectively,JK 968 and DD2 should be threshed at MC lower than 15 and 18%,respectively.Furthermore,the damage mainly occurred in the apical part of seeds,irrespective of the threshing MC in both cultivars.When the embryo was damaged,seedling emergence rates were significantly reduced with great influence on shoot length.Damage to the endosperm resulted in little effect on seedling performance.Flint maize DD2 was more tolerant to mechanical threshing than dent maize JK968.These results provided technical reference for the production and processing of high vigor maize seeds.展开更多
This paper focused on the influence of the shape and size of threshing frames as well as the grades of tobacco leaves on the structure of threshed leaves.The testing tobacco leaves all came from the hilly ecological r...This paper focused on the influence of the shape and size of threshing frames as well as the grades of tobacco leaves on the structure of threshed leaves.The testing tobacco leaves all came from the hilly ecological region of Nanling and belonged to burnt sweet,alcoholic sweet and scent category.The comprehensive evaluating value S was taken as the test index.Results showed that,without considering the influence of tobacco grade on leaf structure,the shapes of first-stage thresher five-link frames were all hexagons,and the combination with the sizes of 3.5,3.0,3.5,3.0,3.0 inches had the highest evaluating value S of 2.49.For tobacco grade C2FH,the shapes of first-stage thresher five-link frames were also hexagons,and the evaluating value S reached the highest value of 3.40 with sizes of 3.5,3.0,3.5,3.0,3.0 inches.Comprehensive analysis showed that:3.0 inch frame performed better in controlling the percentage of large-sized strips than 3.5 inch frame did;rhombic frames were better than hexagon frames in reducing the breakage rate of tobacco leaves;different shapes or sizes of nonadjacent two-link frames can help to improve the threshing quality.展开更多
The Sulige gas field is a typical low-pressure low-permeability tight sandstone gas reservoir. The reservoir has poor seepage capacity, strong heterogeneity, high mineralization of formation water and extremely scarce...The Sulige gas field is a typical low-pressure low-permeability tight sandstone gas reservoir. The reservoir has poor seepage capacity, strong heterogeneity, high mineralization of formation water and extremely scarce water resources on the site. These unfavorable factors have brought great difficulties to the on-site mining process. Now, a nano-composite green environmental protection slick water fracturing fluid system CQFR can be quickly dissolved because of the larger specific surface area, and the small molecular size makes the damage to the reservoir less than 5%, and the average drag reduction effect can reach more than 73%. It can quickly and well dissolve and maintain performance under high salinity conditions and fracturing flowback fluids. It responds well to the complex reservoir conditions on the construction site and makes the flowback fluid recyable, which greatly reduces the consumption of water resources on the construction site and effectively improves the construction efficiency and economic benefits.展开更多
In this research, the effects of initial moisture content and needed impact energy on threshing of soybean pods were studied. An impact device was built based of pendulum mechanism. In the experiments, threshing perce...In this research, the effects of initial moisture content and needed impact energy on threshing of soybean pods were studied. An impact device was built based of pendulum mechanism. In the experiments, threshing percentage of soybean pod samples were measured at three initial moisture content levels of 16.25% and 35% w.b. and three energy levels of 173,284 and 446 mJ. The results of analysis of variance showed that moisture content and energy have significant effects on the threshing percentage. By increasing impact energy, amount of pod threshing increased. Also in all the energy levels, maximum threshing occurred at minimum moisture. Maximum threshing percentage was 83.4%, which was at 16% moisture content and 446 mJ levels, also minimum threshing percentage was 3.3% which was at 35% moisture content and 174 mJ levels. Soybean pod with higher moisture, contact between its edges of the pod was stronger than lower moisture, so more energy was needed to separate two edges at 35% moisture.展开更多
Improving the stability of the homogenization process to achieve the homogeneity of tobacco products is one of important targets for the redrying industry.According to the specification for threshing and redrying proc...Improving the stability of the homogenization process to achieve the homogeneity of tobacco products is one of important targets for the redrying industry.According to the specification for threshing and redrying process,a total of 14 indicators in three categories that affect the quality of the threshing and redrying process were selected.Using analytic hierarchy process,combined with expert experiences,a judgment matrix was constructed to conduct consistency test.The weights of indices in production were obtained.This will help in evaluating the actual production quality,finding the weak links of process and adjusting the parameters of the corresponding links in a targeted manner,thereby improving the quality of production process.展开更多
[Objectives]The paper was to study the occurrence regularity and life history of cigarette beetle Lasioderrma serricorne(Fabricius)in tobacco leaf threshing and redrying workshop.[Methods]With the tobacco leaf threshi...[Objectives]The paper was to study the occurrence regularity and life history of cigarette beetle Lasioderrma serricorne(Fabricius)in tobacco leaf threshing and redrying workshop.[Methods]With the tobacco leaf threshing and redrying workshop as the survey site,the occurrence regularity of L.serricorne was investigated,and the life history table was inferred according to its biological characteristics.The temperature,humidity and duration of tobacco leaf threshing and redrying were simulated in the laboratory to study the survival rate of all states of L.serricorne in this environment.[Results]The lifecycle of L.serricorne in tobacco leaf threshing and redrying workshop was:the overwintering generation pupated in late February;the pupa began to emerge in early March,and reached its peak in late March.The first-generation eggs started hatching in late March,pupated in late May,emerged in early June,and reached the peak eclosion of the first-generation adults in mid-July.The second-generation eggs began to hatch in late July,pupated in mid-August,emerged in late August,and reached the peak eclosion of the second-generation adults in mid-September.The third-generation eggs began to hatch in mid-September;most of the larvae began to overwinter,some pupated in mid-November and survived the winter as pupae,and some pupae emerged to adults.The survival test results of different states of L.serricorne under simulated temperature,humidity and duration in the tobacco leaf threshing and redrying process showed that the mortality rates of eggs in simulated 1,2 and 3 conditions were about 51.22%,90.24% and 100%,and the mortalities of larvae in simulated 1,2 and 3 conditions were about 18.30%,81.25%and 100%,respectively.The mortalities of pupae in simulated 1,2 and 3 conditions were about 69.39%,100% and 100%,and the mortalities of adults in simulated 1,2 and 3 conditions were about 100%,100% and 100%,respectively.[Conclusions]L.serricorne of different states can be killed by appropriately raising the temperature during threshing and redrying.展开更多
文摘This study was conducted to further classify threshed strips, so as to broaden the usable range of raw material and facilitate the effective utilization of to- bacco resource. During the threshing and redwing process, various process param- eters including the rotating speeds of threshing drums of threshing machioe, draught fans and fling drums were scientifically and rationally set according to the actual quality of the raw material. According to the characteristic that strips with close in- herent quality have basically the same specific gravity and leaf thickness, the strips from each discharge hole were accurately evaluated, and classified, followed by redrying and packaging. The results showed that the threshing and separating pro- cedure could improve the separating effect and precision according to tobacco qual- ity, so as to satisfy the separation and classification requirements for tobacco.
基金supported by the earmarked fund for China Agriculture Research System(CARS-02-10)the Special Fund for Agro-scientific Research in the Public Interest,China(201303002)the National Natural Science Foundation of China(31771891)
文摘Mechanical threshing used when preparing maize seeds for planting subjects seed to damage and reduces seed quality.The purpose of this study was to assess the effect of mechanical threshing on the quality of maize seed threshed at different moisture contents(MCs).Seeds of dent maize JK968 and flint maize DD2 were threshed at 12,15,18,21,and 24% MC.The damage degree was determined by iodine staining,and seed vigor was assessed by standard germination(SG),cold test germination(CTG),accelerated aging germination(AAG),seedling emergence rate,and seedling root and shoot length.The results showed that the damage percentage increased,and the seed vigor parameters decreased with increasing seed MC during threshing in both cultivars.For obtaining high seed quality,indicated by at least 90,85,and 80% of SG,AAG,and CTG,respectively,JK 968 and DD2 should be threshed at MC lower than 15 and 18%,respectively.Furthermore,the damage mainly occurred in the apical part of seeds,irrespective of the threshing MC in both cultivars.When the embryo was damaged,seedling emergence rates were significantly reduced with great influence on shoot length.Damage to the endosperm resulted in little effect on seedling performance.Flint maize DD2 was more tolerant to mechanical threshing than dent maize JK968.These results provided technical reference for the production and processing of high vigor maize seeds.
文摘This paper focused on the influence of the shape and size of threshing frames as well as the grades of tobacco leaves on the structure of threshed leaves.The testing tobacco leaves all came from the hilly ecological region of Nanling and belonged to burnt sweet,alcoholic sweet and scent category.The comprehensive evaluating value S was taken as the test index.Results showed that,without considering the influence of tobacco grade on leaf structure,the shapes of first-stage thresher five-link frames were all hexagons,and the combination with the sizes of 3.5,3.0,3.5,3.0,3.0 inches had the highest evaluating value S of 2.49.For tobacco grade C2FH,the shapes of first-stage thresher five-link frames were also hexagons,and the evaluating value S reached the highest value of 3.40 with sizes of 3.5,3.0,3.5,3.0,3.0 inches.Comprehensive analysis showed that:3.0 inch frame performed better in controlling the percentage of large-sized strips than 3.5 inch frame did;rhombic frames were better than hexagon frames in reducing the breakage rate of tobacco leaves;different shapes or sizes of nonadjacent two-link frames can help to improve the threshing quality.
文摘The Sulige gas field is a typical low-pressure low-permeability tight sandstone gas reservoir. The reservoir has poor seepage capacity, strong heterogeneity, high mineralization of formation water and extremely scarce water resources on the site. These unfavorable factors have brought great difficulties to the on-site mining process. Now, a nano-composite green environmental protection slick water fracturing fluid system CQFR can be quickly dissolved because of the larger specific surface area, and the small molecular size makes the damage to the reservoir less than 5%, and the average drag reduction effect can reach more than 73%. It can quickly and well dissolve and maintain performance under high salinity conditions and fracturing flowback fluids. It responds well to the complex reservoir conditions on the construction site and makes the flowback fluid recyable, which greatly reduces the consumption of water resources on the construction site and effectively improves the construction efficiency and economic benefits.
文摘In this research, the effects of initial moisture content and needed impact energy on threshing of soybean pods were studied. An impact device was built based of pendulum mechanism. In the experiments, threshing percentage of soybean pod samples were measured at three initial moisture content levels of 16.25% and 35% w.b. and three energy levels of 173,284 and 446 mJ. The results of analysis of variance showed that moisture content and energy have significant effects on the threshing percentage. By increasing impact energy, amount of pod threshing increased. Also in all the energy levels, maximum threshing occurred at minimum moisture. Maximum threshing percentage was 83.4%, which was at 16% moisture content and 446 mJ levels, also minimum threshing percentage was 3.3% which was at 35% moisture content and 174 mJ levels. Soybean pod with higher moisture, contact between its edges of the pod was stronger than lower moisture, so more energy was needed to separate two edges at 35% moisture.
基金Science and Technology Foundation of Hunan Branch of China National Tobacco Corporation(HN2020KJ14,HN2020KJ17).
文摘Improving the stability of the homogenization process to achieve the homogeneity of tobacco products is one of important targets for the redrying industry.According to the specification for threshing and redrying process,a total of 14 indicators in three categories that affect the quality of the threshing and redrying process were selected.Using analytic hierarchy process,combined with expert experiences,a judgment matrix was constructed to conduct consistency test.The weights of indices in production were obtained.This will help in evaluating the actual production quality,finding the weak links of process and adjusting the parameters of the corresponding links in a targeted manner,thereby improving the quality of production process.
基金Supported by Science and Technology Project of China Tobacco Guizhou Provincial Corporation(201918)Guizhou Province Academic Pioneer and Academic Pioneer Construction。
文摘[Objectives]The paper was to study the occurrence regularity and life history of cigarette beetle Lasioderrma serricorne(Fabricius)in tobacco leaf threshing and redrying workshop.[Methods]With the tobacco leaf threshing and redrying workshop as the survey site,the occurrence regularity of L.serricorne was investigated,and the life history table was inferred according to its biological characteristics.The temperature,humidity and duration of tobacco leaf threshing and redrying were simulated in the laboratory to study the survival rate of all states of L.serricorne in this environment.[Results]The lifecycle of L.serricorne in tobacco leaf threshing and redrying workshop was:the overwintering generation pupated in late February;the pupa began to emerge in early March,and reached its peak in late March.The first-generation eggs started hatching in late March,pupated in late May,emerged in early June,and reached the peak eclosion of the first-generation adults in mid-July.The second-generation eggs began to hatch in late July,pupated in mid-August,emerged in late August,and reached the peak eclosion of the second-generation adults in mid-September.The third-generation eggs began to hatch in mid-September;most of the larvae began to overwinter,some pupated in mid-November and survived the winter as pupae,and some pupae emerged to adults.The survival test results of different states of L.serricorne under simulated temperature,humidity and duration in the tobacco leaf threshing and redrying process showed that the mortality rates of eggs in simulated 1,2 and 3 conditions were about 51.22%,90.24% and 100%,and the mortalities of larvae in simulated 1,2 and 3 conditions were about 18.30%,81.25%and 100%,respectively.The mortalities of pupae in simulated 1,2 and 3 conditions were about 69.39%,100% and 100%,and the mortalities of adults in simulated 1,2 and 3 conditions were about 100%,100% and 100%,respectively.[Conclusions]L.serricorne of different states can be killed by appropriately raising the temperature during threshing and redrying.
