Due to complex geological structures and a narrow safe mud density window,offshore fractured formations frequently encounter severe lost circulation(LC)during drilling,significantly hindering oil and gas exploration a...Due to complex geological structures and a narrow safe mud density window,offshore fractured formations frequently encounter severe lost circulation(LC)during drilling,significantly hindering oil and gas exploration and development.Predicting LC risks enables the targeted implementation of mitigation strategies,thereby reducing the frequency of such incidents.To address the limitations of existing 3D geomechanical modeling in predicting LC,such as arbitrary factor selection,subjective weight assignment,and the inability to achieve pre-drilling prediction along the entire well section,an improved prediction method is proposed.This method integrates multi-source data and incorporates three LC-related sensitivity factors:fracture characteristics,rock brittleness,and in-situ stress conditions.A quantitative risk assessment model for LC is developed by combining the subjective analytic hierarchy process with the objective entropy weight method(EWM)to assign weights.Subsequently,3D geomechanical modeling is applied to identify regional risk zones,enabling digital visualization for pre-drilling risk prediction.The developed 3D LC risk prediction model was validated using actual LC incidents from drilled wells.Results were generally consistent with field-identified LC zones,with an average relative error of 19.08%,confirming its reliability.This method provides practical guidance for mitigating potential LC risks and optimizing drilling program designs in fractured formations.展开更多
Every summer,Oregons Lost Lake disappears down a couple of volcanic tunnels,only to return in the fall,as a number of streams start flowing into what looks like a peaceful meadow.Driving past Lost Lake in the late fal...Every summer,Oregons Lost Lake disappears down a couple of volcanic tunnels,only to return in the fall,as a number of streams start flowing into what looks like a peaceful meadow.Driving past Lost Lake in the late fall or in the winter,you may not pay much attention to the seemingly plain body of water,but making the same drive in the late spring or in the summer.展开更多
Lost circulation of drilling fluid is an international engineering problem during drilling.Aiming at the problems of the first-time lost circulation control success rate and poor adaptability of traditional lost circu...Lost circulation of drilling fluid is an international engineering problem during drilling.Aiming at the problems of the first-time lost circulation control success rate and poor adaptability of traditional lost circulation materials,a new self-healing lost circulation material based on dynamic disulfide bonds was prepared and named CKSH.In this paper,the particle size of self-healing lost circulation material was from 0.1 to 5 mm.The structure was analyzed by modern characterization means,and the drilling fluid compatibility,self-healing performance were evaluated.The self-healing and bridging-filling-sealing mechanism of CKSH were revealed.The results showed that the healing rate of CKSH could reach100%after 12 h over 70℃.It showed good compatibility with drilling fluid,with no effect on rheology or filtration loss.It could be stably suspended in drilling fluid,and the temperature resistance reached140℃.Healing by self-healing lost circulation materials of different particle size,the pressure bearing capacity of plugging zone were over 12 MPa for fracture opening of 1–5 mm.It could play a synergistic role with traditional lost circulation materials by chemical bonding,and the repeated loss caused by physical plugging was avoided.The research results of this paper can improve the bridging plugging bearing pressure strength and the first-time lost circulation control success rate,which is of great significance for improving drilling efficiency and reducing non-productive time.展开更多
During drilling operations in deep fractured tight gas reservoirs,lost circulation of working fluid frequently occurs due to the formationʼs low pressure-bearing capacity.Adding lost circulation materials(LCMs)to dril...During drilling operations in deep fractured tight gas reservoirs,lost circulation of working fluid frequently occurs due to the formationʼs low pressure-bearing capacity.Adding lost circulation materials(LCMs)to drilling fluids is the most common method for controlling lost circulation.Among these,granular LCMs are widely used,but the application frequency of flaky LCMs has been increasing annually due to their unique morphology.However,the migration and plugging behavior of flaky LCMs within fractures,and the mechanisms enhancing the pressure-bearing capacity of the plugging zone are not well understood.Therefore,this study conducted visual plugging experiments and dynamic fracture plugging experiments to evaluate the plugging mode and pressure-bearing capacity of the plugging slurry with various particle sizes and concentrations of flaky LCMs.The experimental results demonstrate that the fracture plugging process can be divided into four stages:uniform flow stage of the plugging slurry,formation and development stage of the bridging area,formation and development stage of the plugging area,and pressure-bearing stage of the plugging zone.The inclusion of flaky LCMs notably reduces the duration of stages 1 and 2,while simultaneously increasing the proportion of the plugging zone and enhancing its surface porosity.Flaky LCMs reduce the effective fracture width through“interception”and“co-bridging”modes,thus improving plugging zone formation efficiency.Appropriate particle size and concentration of flaky LCMs increase the area and length of the plugging zone.This reduces the fracture width increment caused by injection pressure and enhances frictional force between the plugging zone and fracture surface,thereby improving the pressure-bearing capacity of the plugging zone.However,excessively high concentrations of flaky LCMs result in decreased structural stability of the plugging zone,and excessively large particle sizes increase the risk of plugging outside fracture inlet.The recommended concentration of flaky LCMs in the plugging slurry is 2%–3%,with a particle size 1.2 to 1.5 times that of the bridging granular LCMs and not exceeding twice the fracture width.This study provides a theoretical foundation for selecting LCMs and designing plugging formulations for field applications.展开更多
Last Monday,on my way to school,I found a wallet on the ground.I picked up it①and opened it.There was some money,a student ID card and a few photos in it.I thought the owner must be very worried.
Lost circulation of drilling fluid is one of the most common and costly problems in drilling operations.This highlights the importance of wellbore strengthening treatment sthat can utilize lost circulation materials(L...Lost circulation of drilling fluid is one of the most common and costly problems in drilling operations.This highlights the importance of wellbore strengthening treatment sthat can utilize lost circulation materials(LCMs)to seal fractures associated with the wellbore.In this work,a numerical model accounting for the deformation of surrounding rock,fluid flow in the fracture,fracture propagation,and the transport of LCMs is presented to investigate the wellbore strengthening,from the fracture initiation to the fracture arrest,due to plugs formed by LCMs.The equations governing the rock deformation and fluid flow are solved by the dual boundary element method and the finite volume method,respectively.The transport of LCMs is solved based on an empirical constitutive model in suspension flow,and several characteristic quantities are derived by dimensional analysis.It is found that two dimensionless parameters,dimensionless toughness and normalized initial particle concentration,control the migration of LCM particles.The numerical results show that the dimensionless toughness influences the entrance and bridging of LCMs while the initial concentration controls the location of the particle bridging.When the initial concentration is larger than 0.8,the particle bridging tends to occur near the fracture entry.Conversely,when the initial concentration is less than 0.8,the particle bridging occurs near the fracture tip.This work provides an effective tool to predict the LCM transport and plugging in the wellbore strengthening process.展开更多
Objective Telomere length is a key aging biomarker,but its sex-specific impact on individualized life expectancy remains uncertain.This study explores sex differences in leukocyte telomere length(LTL)and individualize...Objective Telomere length is a key aging biomarker,but its sex-specific impact on individualized life expectancy remains uncertain.This study explores sex differences in leukocyte telomere length(LTL)and individualized expected years of life lost(YLL).Methods A prospective cohort of 445,399 participants(203,731 males and 241,668 females)from the UK Biobank was analyzed.LTL values were log-transformed,and YLL was calculated using life tables.Multiple linear regression was applied to examine sex-specific associations.Results In males,each standard deviation(S.D.)increase in LTL was linked to a 0.965-year decrease in YLL(95%CI:–1.025,–0.900;P<0.001).In females,longer LTL was related to a 0.102-year increase in YLL(95%CI:0.057,0.146;P<0.001).Among postmenopausal females,LTL showed a protective effect similar to that in males(0.387-year decrease,95%CI:−0.446,–0.328;P<0.001),while premenopausal females exhibited a detrimental association(0.705-year increase,95%CI:0.625,0.785;P<0.001).Comparable trends were observed across major aging-related diseases,pointing to a consistent biological pattern.Conclusion The influence of LTL on life expectancy varies significantly by sex,with protective associations seen in males and postmenopausal females.This suggests hormonal involvement in telomere dynamics.The results support integrating sex-specific perspectives into aging and telomere research and clinical practice.展开更多
The microstructure and mechanical properties of Mg-10.1Gd-3.74Y-0.25Zr （mass fraction, %） alloy （GW104 alloy） cast by metal mould casting （MMC） and lost foam casting （LFC） were evaluated, respectively. It is r...The microstructure and mechanical properties of Mg-10.1Gd-3.74Y-0.25Zr （mass fraction, %） alloy （GW104 alloy） cast by metal mould casting （MMC） and lost foam casting （LFC） were evaluated, respectively. It is revealed that different forming modes do not influence the phase composition of as-cast alloy. In the as-cast specimens, the microstructures are similar and composed of α-Mg solid solution, eutectic compound of α-Mg＋Mg 24 （Gd, Y） 5 and cuboid-shaped Mg 5 （Gd, Y） phase; whereas the average grain size of the alloy produced by metal mould casting is smaller than that by lost foam casting. The eutectic compound of the alloy is completely dissolved after solution treatment at 525 ℃for 6 h, while the Mg 5 （Gd, Y） phase still exists after solution treatment. After peak-ageing, the lost foam cast alloy exhibits the maximum ultimate tensile strength of 285 MPa, and metal mould cast specimen 325 MPa at room temperature, while the tensile yield strengths of them are comparable. It can be concluded that GW104 alloy cast by lost foam casting possesses similar microstructure and evidently lower mechanical strength compared with metal mould cast alloy, due to slow solidification rate and proneness to form shrinkage porosities during lost foam casting process.展开更多
基金supported by the National Natural Science Foundation of China(No.52074312)the CNPC Science and Technology Innovation Foundation(No.2021DQ02-0505)+1 种基金the Open Fund Project of the National Key Laboratory for the Enrichment Mechanism and Efficient Development of Shale Oil and Gas(No.36650000-24-ZC0609-0006)the Major Science and Technology Project of Karamay City(No.20232023zdzx0003).
文摘Due to complex geological structures and a narrow safe mud density window,offshore fractured formations frequently encounter severe lost circulation(LC)during drilling,significantly hindering oil and gas exploration and development.Predicting LC risks enables the targeted implementation of mitigation strategies,thereby reducing the frequency of such incidents.To address the limitations of existing 3D geomechanical modeling in predicting LC,such as arbitrary factor selection,subjective weight assignment,and the inability to achieve pre-drilling prediction along the entire well section,an improved prediction method is proposed.This method integrates multi-source data and incorporates three LC-related sensitivity factors:fracture characteristics,rock brittleness,and in-situ stress conditions.A quantitative risk assessment model for LC is developed by combining the subjective analytic hierarchy process with the objective entropy weight method(EWM)to assign weights.Subsequently,3D geomechanical modeling is applied to identify regional risk zones,enabling digital visualization for pre-drilling risk prediction.The developed 3D LC risk prediction model was validated using actual LC incidents from drilled wells.Results were generally consistent with field-identified LC zones,with an average relative error of 19.08%,confirming its reliability.This method provides practical guidance for mitigating potential LC risks and optimizing drilling program designs in fractured formations.
文摘Every summer,Oregons Lost Lake disappears down a couple of volcanic tunnels,only to return in the fall,as a number of streams start flowing into what looks like a peaceful meadow.Driving past Lost Lake in the late fall or in the winter,you may not pay much attention to the seemingly plain body of water,but making the same drive in the late spring or in the summer.
基金supported by National Natural Science Foundation of China(52304006,52274032,and 51774062)the General Project of the Chongqing Natural Science Foundation(CSTB2022NSCQ-MSX1554 and CSTB2022NSCQ-MSX0349)Shaanxi Province Key Laboratory of Environmental Pollution Control and Reservoir Protection Technology of Oilfields and Engineering Research Center of Oil and Gas Field Chemistry,Universities of Shaanxi Province(XSYU-CCCE-2402).
文摘Lost circulation of drilling fluid is an international engineering problem during drilling.Aiming at the problems of the first-time lost circulation control success rate and poor adaptability of traditional lost circulation materials,a new self-healing lost circulation material based on dynamic disulfide bonds was prepared and named CKSH.In this paper,the particle size of self-healing lost circulation material was from 0.1 to 5 mm.The structure was analyzed by modern characterization means,and the drilling fluid compatibility,self-healing performance were evaluated.The self-healing and bridging-filling-sealing mechanism of CKSH were revealed.The results showed that the healing rate of CKSH could reach100%after 12 h over 70℃.It showed good compatibility with drilling fluid,with no effect on rheology or filtration loss.It could be stably suspended in drilling fluid,and the temperature resistance reached140℃.Healing by self-healing lost circulation materials of different particle size,the pressure bearing capacity of plugging zone were over 12 MPa for fracture opening of 1–5 mm.It could play a synergistic role with traditional lost circulation materials by chemical bonding,and the repeated loss caused by physical plugging was avoided.The research results of this paper can improve the bridging plugging bearing pressure strength and the first-time lost circulation control success rate,which is of great significance for improving drilling efficiency and reducing non-productive time.
基金support from the National Natural Science Foundation of China(Grant No.52274009).
文摘During drilling operations in deep fractured tight gas reservoirs,lost circulation of working fluid frequently occurs due to the formationʼs low pressure-bearing capacity.Adding lost circulation materials(LCMs)to drilling fluids is the most common method for controlling lost circulation.Among these,granular LCMs are widely used,but the application frequency of flaky LCMs has been increasing annually due to their unique morphology.However,the migration and plugging behavior of flaky LCMs within fractures,and the mechanisms enhancing the pressure-bearing capacity of the plugging zone are not well understood.Therefore,this study conducted visual plugging experiments and dynamic fracture plugging experiments to evaluate the plugging mode and pressure-bearing capacity of the plugging slurry with various particle sizes and concentrations of flaky LCMs.The experimental results demonstrate that the fracture plugging process can be divided into four stages:uniform flow stage of the plugging slurry,formation and development stage of the bridging area,formation and development stage of the plugging area,and pressure-bearing stage of the plugging zone.The inclusion of flaky LCMs notably reduces the duration of stages 1 and 2,while simultaneously increasing the proportion of the plugging zone and enhancing its surface porosity.Flaky LCMs reduce the effective fracture width through“interception”and“co-bridging”modes,thus improving plugging zone formation efficiency.Appropriate particle size and concentration of flaky LCMs increase the area and length of the plugging zone.This reduces the fracture width increment caused by injection pressure and enhances frictional force between the plugging zone and fracture surface,thereby improving the pressure-bearing capacity of the plugging zone.However,excessively high concentrations of flaky LCMs result in decreased structural stability of the plugging zone,and excessively large particle sizes increase the risk of plugging outside fracture inlet.The recommended concentration of flaky LCMs in the plugging slurry is 2%–3%,with a particle size 1.2 to 1.5 times that of the bridging granular LCMs and not exceeding twice the fracture width.This study provides a theoretical foundation for selecting LCMs and designing plugging formulations for field applications.
文摘Last Monday,on my way to school,I found a wallet on the ground.I picked up it①and opened it.There was some money,a student ID card and a few photos in it.I thought the owner must be very worried.
基金support of the National Natural Science Foundation of China(Grant No.52371279)the Program for International Exchange and Cooperation in Education by the Ministry of Education of the People's Republic of China(Grant No.57220500123).
文摘Lost circulation of drilling fluid is one of the most common and costly problems in drilling operations.This highlights the importance of wellbore strengthening treatment sthat can utilize lost circulation materials(LCMs)to seal fractures associated with the wellbore.In this work,a numerical model accounting for the deformation of surrounding rock,fluid flow in the fracture,fracture propagation,and the transport of LCMs is presented to investigate the wellbore strengthening,from the fracture initiation to the fracture arrest,due to plugs formed by LCMs.The equations governing the rock deformation and fluid flow are solved by the dual boundary element method and the finite volume method,respectively.The transport of LCMs is solved based on an empirical constitutive model in suspension flow,and several characteristic quantities are derived by dimensional analysis.It is found that two dimensionless parameters,dimensionless toughness and normalized initial particle concentration,control the migration of LCM particles.The numerical results show that the dimensionless toughness influences the entrance and bridging of LCMs while the initial concentration controls the location of the particle bridging.When the initial concentration is larger than 0.8,the particle bridging tends to occur near the fracture entry.Conversely,when the initial concentration is less than 0.8,the particle bridging occurs near the fracture tip.This work provides an effective tool to predict the LCM transport and plugging in the wellbore strengthening process.
基金supported by the National Natural Science Foundation of China(82192903,82192904)the National Science and Technology Major Projects of China(2023ZD0510103)。
文摘Objective Telomere length is a key aging biomarker,but its sex-specific impact on individualized life expectancy remains uncertain.This study explores sex differences in leukocyte telomere length(LTL)and individualized expected years of life lost(YLL).Methods A prospective cohort of 445,399 participants(203,731 males and 241,668 females)from the UK Biobank was analyzed.LTL values were log-transformed,and YLL was calculated using life tables.Multiple linear regression was applied to examine sex-specific associations.Results In males,each standard deviation(S.D.)increase in LTL was linked to a 0.965-year decrease in YLL(95%CI:–1.025,–0.900;P<0.001).In females,longer LTL was related to a 0.102-year increase in YLL(95%CI:0.057,0.146;P<0.001).Among postmenopausal females,LTL showed a protective effect similar to that in males(0.387-year decrease,95%CI:−0.446,–0.328;P<0.001),while premenopausal females exhibited a detrimental association(0.705-year increase,95%CI:0.625,0.785;P<0.001).Comparable trends were observed across major aging-related diseases,pointing to a consistent biological pattern.Conclusion The influence of LTL on life expectancy varies significantly by sex,with protective associations seen in males and postmenopausal females.This suggests hormonal involvement in telomere dynamics.The results support integrating sex-specific perspectives into aging and telomere research and clinical practice.
基金Project(2007CB613704)supported by the National Basic Research Program of China
文摘The microstructure and mechanical properties of Mg-10.1Gd-3.74Y-0.25Zr （mass fraction, %） alloy （GW104 alloy） cast by metal mould casting （MMC） and lost foam casting （LFC） were evaluated, respectively. It is revealed that different forming modes do not influence the phase composition of as-cast alloy. In the as-cast specimens, the microstructures are similar and composed of α-Mg solid solution, eutectic compound of α-Mg＋Mg 24 （Gd, Y） 5 and cuboid-shaped Mg 5 （Gd, Y） phase; whereas the average grain size of the alloy produced by metal mould casting is smaller than that by lost foam casting. The eutectic compound of the alloy is completely dissolved after solution treatment at 525 ℃for 6 h, while the Mg 5 （Gd, Y） phase still exists after solution treatment. After peak-ageing, the lost foam cast alloy exhibits the maximum ultimate tensile strength of 285 MPa, and metal mould cast specimen 325 MPa at room temperature, while the tensile yield strengths of them are comparable. It can be concluded that GW104 alloy cast by lost foam casting possesses similar microstructure and evidently lower mechanical strength compared with metal mould cast alloy, due to slow solidification rate and proneness to form shrinkage porosities during lost foam casting process.
