Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or ...Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or attitude instability,seriously compromising mission reliability.To address this engineering challenge,this paper proposes a multi-point low-impact locking/release mechanism based on the mobility model and energy conversion strategy.Through establishing a DOF constraint framework system,this paper systematically analyzes the energy transfer and conversion characteristics during the wing separation process,reveals the generation mechanism of impact loads,and conducts research on low-impact design based on energy conversion strategy.Building on this foundation,a single-point locking/release mechanism employing parallel trapezoidal key shaft structure was designed,which increases frictional contact time and reduces the energy release rate,thereby achieving low-impact characteristics.The mechanism's performance was validated through physical prototype development and systematic functional testing(including unlocking force,synchronization,and impact tests).Experimental results demonstrate:(1)Under 14 kN preload condition,the maximum unlocking force was only 92.54 N,showing a linear relationship with preload that satisfies the"strong-connection/weak-unlock"design requirement;(2)Wing separation was completed within 46 ms,with synchronization time difference among three separation mechanisms stably controlled within 12-14 ms,proving rapid and reliable operation;(3)The unlocking impact acceleration ranged between 26 and 73 g,below the 100 g design limit,confirming the effectiveness of the energy conversion strategy.The proposed low-impact locking/release mechanism design method based on energy conversion strategy resolves the traditional challenges of high impact and synchronization deficiencies.The synergistic optimization mechanism of"structural load reduction and performance improvement"provides a highly reliable technical solution for wing separable mechanisms while offering novel design insights for wing connection/separation systems engineering.展开更多
In view of the time-consuming and unreliable deficiencies of the cross-axis work piece in the clamping process,combined with the working characteristics of the eccentric mechanism,a simple and fast eccentric locking m...In view of the time-consuming and unreliable deficiencies of the cross-axis work piece in the clamping process,combined with the working characteristics of the eccentric mechanism,a simple and fast eccentric locking mechanism is designed.The push rod iquickly driven by the combined action of the handle and the drum,so that the cross shaft work piece can be quickly locked in the axial direction.The eccentric locking mechanism not only has simple operation and convenient maintenance,but also has the characteristics of low manufacturing cost and high life,and has certain reference value for future special fixture design.展开更多
A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise...A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise. Like many low phase noise oscillators, a cavity magnonic oscillator faces the challenge that its narrow resonance profile is not well suited for injection locking amplification. This work presents an improved design for such an oscillator configured as an injection locking amplifier(ILA) with an extended lock range. The proposed design features a two-stage architecture, consisting of a pre-amplification oscillator and a cavity magnonic oscillator, separated by an isolator to prevent backward locking.By optimizing the circuit parameters of each stage, the proposed design achieved an order of magnitude increase in lock range, when compared to its predecessors, all while preserving the phase noise quality of the input, making it well-suited for narrowband, sensitive signal amplification. Furthermore, this work provides a method for using oscillators with high spectral purity as injection locking amplifiers.展开更多
As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from di...As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from different studies,this study constructs a refined block model(including Qilian,Alxa,Ordos,Xining,Haiyuan,and Lanzhou blocks)and uses the grid search and simulated annealing methods to invert GPS data for slip rate and locking degree of the Haiyuan fault zone.The results are as follows:(1)The sinistral slip rates in the western,middle,and eastern segments are 4.93-5.22 mm/a,1.52-4.94 mm/a,and 0.43-1.18 mm/a,decreasing eastward on the whole,while the compression rates are 0.45-1.26 mm/a,0.58-2.62 mm/a,and3.52-4.48 mm/a,increasing eastward on the whole.(2)The locking depth of the western segment increases from about 5 km to about 20 km eastward;the middle segment decreases and then increases eastward;the eastern segment concentrates at about 20 km(PHI is about 0.86).(3)The slip deficit is relatively higher in the Lenglongling,Jinqianghe,Maomaoshan,and Liupanshan faults(averaging about 3.42 mm/a,4.16 mm/a,4.23 mm/a,and 3.43 mm/a within 20 km).(4)The Qilian,Alxa,Xining,Lanzhou,and Haiyuan blocks rotate clockwise,while the Ordos block rotates counterclockwise.Additionally,by comparing different block models,the Haiyuan block should be considered independently.The Haiyuan fault zone adjusts surrounding block movements and uplifts Liupanshan mountain tectonically.The results can provide important references for understanding the regional earthquake risk and deformation mechanism.展开更多
Rubber-like materials that are commonly used in structural applications are modelled using hyperelastic material models.Most of the hyperelastic materials are nearly incompressible,which poses challenges,i.e.,volumetr...Rubber-like materials that are commonly used in structural applications are modelled using hyperelastic material models.Most of the hyperelastic materials are nearly incompressible,which poses challenges,i.e.,volumetric locking during numerical modelling.There exist many formulations in the context of the finite element method,among which the mixed displacementpressure formulation is robust.However,such a displacement-pressure formulation is less explored in meshfree methods,which mitigates the problem associated with mesh distortion during large deformation.This work addresses this issue of alleviating volumetric locking in the element-free Galerkin method(EFGM),which is one of the popular meshfree methods.A two-field mixed variational formulation using the perturbed Lagrangian approach within the EFGM framework is proposed for modelling nearly incompressible hyperelastic material models,such as Neo-Hookean and Mooney-Rivlin.Taking advantage of the meshless nature of the EFGM,this work introduces a unique approach by randomly distributing pressure nodes across the geometry,following specific guidelines.A wide spectrum of problems involving bending,tension,compression,and contact is solved using two approaches of the proposed displacement-pressure node formulation involving regular and irregular pressure node distribution.It is observed that both approaches give accurate results compared to the reference results,though the latter offers flexibility in the pressure nodal distribution.展开更多
BACKGROUND Proximal humerus fractures(PHFs)are common,especially in the elderly,and optimal surgical management remains debated.This study compares clinical,functional,and radiographic outcomes of deltoid split(DS)vs ...BACKGROUND Proximal humerus fractures(PHFs)are common,especially in the elderly,and optimal surgical management remains debated.This study compares clinical,functional,and radiographic outcomes of deltoid split(DS)vs deltopectoral(DP)approaches in PHFs treated with locking plates.AIM To evaluate and compare the clinical,functional,and radiographic outcomes-as well as postoperative complication rates-associated with the DS vs the DP surgical approach in the open reduction and internal fixation(ORIF)of PHFs using locking plate constructs.METHODS A multicenter retrospective study of 120 patients undergoing ORIF for closed Neer type II-IV PHFs between January 2023 and December 2023.Patients were grouped by surgical approach[DS(n=70),DP(n=50)].Outcome measures included Numeric Rating Scale(NRS)for pain,Quick-Disabilities in Arm,Shoulder,and Hand questionnaire(QuickDASH),Constant-Murley score,Short Form Health Survey-12v2,and radiographic alignment.Complication rates were recorded.Statistical significance was defined as P<0.05.RESULTS Early outcomes favored the DS group:(1)Lower NRS(3.1 vs 5.9);(2)Higher Constant-Murley(68.2 vs 50.5);and(3)Better QuickDASH(25.4 vs 37.1).Complication rate was lower in the DS group(1.66%vs 5.81%).Radiographic outcomes were comparable.Long-term results were similar between groups.CONCLUSION While both approaches yield satisfactory long-term outcomes,the DS approach is associated with faster early recovery and fewer complications,supporting its use in selected cases.展开更多
Fiber optic sensing technology,with its low transmission loss,wide bandwidth,and broad dynamic range,offers significant advantages for high-sensitivity measurements.In this study,a multi-band soliton modulation system...Fiber optic sensing technology,with its low transmission loss,wide bandwidth,and broad dynamic range,offers significant advantages for high-sensitivity measurements.In this study,a multi-band soliton modulation system for stress sensing is proposed,utilizing Ti_(3)C_(2)T_(x)to generate ultrashort pulses.By applying stress to microfibers,dichromatic periodic multisoliton mode-locking at 1530 nm and 1555.2 nm is achieved.Vibrational mechanical stress further modulates cross-phase interactions between solitons,inducing higher-order bound solitons with small-amplitude oscillations.These dynamic processes reveal complex nonlinear optical behaviors and enhance sensing capabilities.Additionally,the feasibility of stable mode-locking of Ti_(3)C_(2)T_(x)in a 1µm multimode cavity is analyzed using the multimode nonlinear Schrodinger equation,and multisoliton states are experimentally demonstrated by integrating a 1µm narrow-linewidth ultrafast multimode laser with a stressed microfiber.展开更多
In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement with...In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement without complete failure,culminating in a collapse in October 2018.The mechanisms behind its resistance to failure despite substantial deformation and the influence of the complex geo-structure within the tectonic mélange belt remain unclear.To address these questions,this study utilized a multidisciplinary approach,integrating on-site geological field mapping,surface deformation monitoring,multielectrode resistivity method,and deep displacement analysis.The aim was to evaluate the impact of the intricate geo-structure within the tectonic mélange belt on the Baige landslide events.Findings reveal that the landslide's geo-structure consists of structurally fractured,mesh-like rock masses,including heterogeneous lenticular rock masses and intermittent brittle shear zones distributed around the lens-shaped rock masses.The study underscores that the inhomogeneous and weakly deformed lenticular rock masses function as natural locked segments,governing the stability of the Baige landslide.Specifically,the relatively intact and hard granodiorite porphyry play a crucial role in locking the landslide's deformation.Deep displacement analysis indicates that the brittle shear zones act as the sliding surfaces.The progressive destruction of the locked segments and the gradual penetration of brittle shear zones,driven by gravitational potential energy,contribute to the landslide occurrence.This research provides critical insights into the formation mechanisms of large-scale landslides within tectonic mélange belts.展开更多
Spin-momentum locking is widely regarded as an inherent property of evanescent waves,where the transverse spin angular momentum is intrinsically tied to the wave's polarization.This principle is well established i...Spin-momentum locking is widely regarded as an inherent property of evanescent waves,where the transverse spin angular momentum is intrinsically tied to the wave's polarization.This principle is well established in systems such as surface plasmon polaritons,surface elastic waves,and other evanescent modes.Here,we theoretically unveil an anomalous breakdown of spin-momentum locking in evanescent electromagnetic waves at a metalgyromagnetic interface.We show that the hybrid polarization of the field induces two successive reversals of transverse spin near the interface—directly violating the conventional locking between spin and momentum.As a result,identical chiral sources placed at different heights above the interface excite evanescent waves propagating in opposite directions,defying standard expectations.This discovery challenges the presumed universality of spin-momentum locking and opens new degrees of freedom for controlling wave propagation in photonic and plasmonic systems.展开更多
The equivalent circuit of single-cavity multiple-device fundamentaloscillator(SCMDFO)and that of single-device harmonic oscillator(SDHO)proposed byK.Kurokawa and K.Solbach,respectively,are extended and applied to a si...The equivalent circuit of single-cavity multiple-device fundamentaloscillator(SCMDFO)and that of single-device harmonic oscillator(SDHO)proposed byK.Kurokawa and K.Solbach,respectively,are extended and applied to a single-cavitymultiple-device harmonic oscillator(SCMDHO).By means of describing the functions ofnonlinearity of Gunn diodes,the performances of the SCMDHO are analyzed.It is foundthat the voltage amplitudes are similar to those of SDHO,and the ratio of maximum pow-er of harmonic to that of fundamental is identical to that in SDHO when the devices havesame parameters.The harmonic injection locking behavior is also investigated.The injec-tion locking range is greater than that of SDHO if locking gain remains constant.A2-Gunn diode harmonic oscillator was designed.It delivers 30mW output power at103GHz.The mechanical tuning range is 4.15GHz when the output power remains morethan 10mW.The desired operation mode is stable.展开更多
随着电力系统的发展,现行的IEC 60372"Locking devices for ball and socket couplings of string insulator units:Dimensions and tests"(Third edition)1984版已经无法涵盖和适应新的特高压大吨位绝缘子产品和技术的发展,...随着电力系统的发展,现行的IEC 60372"Locking devices for ball and socket couplings of string insulator units:Dimensions and tests"(Third edition)1984版已经无法涵盖和适应新的特高压大吨位绝缘子产品和技术的发展,包括对应于36和40两种新的联接标记的更高强度等级的绝缘子。笔者介绍了IEC TC36/MT21工作组维护IEC 60372标准的主要内容:包括结合国际工程实践经验,将已经被广泛应用的36、40两个联接标记加入到本标准中;研究是否增加锁紧销操作试验项目;研究并修改了原标准中L2和L5错误的问题;解决了28BW型锁紧销是否在本次修订中纳入标准的问题等。展开更多
Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. ...Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. A finite element analysis （FEA） model defining more than 300 contact pairs for long nut-short screw locking mechanism of a large-scale vertical gear-rack typed ship-lift was built. Using augmented Lagrange method and symmetry algorithm of contact element stiffness, the FEA model was analyzed, and the contact stress of contact interfaces and the von Mises stress of key parts were obtained. The results show that the design of the locking mechanism meets the requirement of engineering, and this method is effective for solving large stole nonlinear contact pairs.展开更多
We present a laser frequency locking to Rydberg transition with electromagnetically induced transparency（EIT）spectra in a room-temperature cesium vapor cell. Cesium levels 6S_（1/2）, 6P_（3/2）, and the n D_（5/2）...We present a laser frequency locking to Rydberg transition with electromagnetically induced transparency（EIT）spectra in a room-temperature cesium vapor cell. Cesium levels 6S_（1/2）, 6P_（3/2）, and the n D_（5/2） state, compose a cascade three-level system, where a coupling laser drives Rydberg transition, and probe laser detects the EIT signal. The error signal, obtained by demodulating the EIT signal, is used to lock the coupling laser frequency to Rydberg transition. The laser frequency fluctuation, ~0.7 MHz, is obtained after locking on, with the minimum Allan variance to be 8.9 × 10^（-11）.This kind of locking method can be used to stabilize the laser frequency to the excited transition.展开更多
文摘Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or attitude instability,seriously compromising mission reliability.To address this engineering challenge,this paper proposes a multi-point low-impact locking/release mechanism based on the mobility model and energy conversion strategy.Through establishing a DOF constraint framework system,this paper systematically analyzes the energy transfer and conversion characteristics during the wing separation process,reveals the generation mechanism of impact loads,and conducts research on low-impact design based on energy conversion strategy.Building on this foundation,a single-point locking/release mechanism employing parallel trapezoidal key shaft structure was designed,which increases frictional contact time and reduces the energy release rate,thereby achieving low-impact characteristics.The mechanism's performance was validated through physical prototype development and systematic functional testing(including unlocking force,synchronization,and impact tests).Experimental results demonstrate:(1)Under 14 kN preload condition,the maximum unlocking force was only 92.54 N,showing a linear relationship with preload that satisfies the"strong-connection/weak-unlock"design requirement;(2)Wing separation was completed within 46 ms,with synchronization time difference among three separation mechanisms stably controlled within 12-14 ms,proving rapid and reliable operation;(3)The unlocking impact acceleration ranged between 26 and 73 g,below the 100 g design limit,confirming the effectiveness of the energy conversion strategy.The proposed low-impact locking/release mechanism design method based on energy conversion strategy resolves the traditional challenges of high impact and synchronization deficiencies.The synergistic optimization mechanism of"structural load reduction and performance improvement"provides a highly reliable technical solution for wing separable mechanisms while offering novel design insights for wing connection/separation systems engineering.
文摘In view of the time-consuming and unreliable deficiencies of the cross-axis work piece in the clamping process,combined with the working characteristics of the eccentric mechanism,a simple and fast eccentric locking mechanism is designed.The push rod iquickly driven by the combined action of the handle and the drum,so that the cross shaft work piece can be quickly locked in the axial direction.The eccentric locking mechanism not only has simple operation and convenient maintenance,but also has the characteristics of low manufacturing cost and high life,and has certain reference value for future special fixture design.
基金funded by NSERC Discovery Grants, NSERC Discovery Accelerator Supplements, Innovation Proof-of-Concept Grant of Research Manitoba, and Faculty of Science Research Innovation and Commercialization Grant of University of Manitoba (C.-M.H.)。
文摘A cavity magnonic oscillator uses the coupling of a planar transmission line oscillator(cavity) and spin excitations(magnons) in a ferrimagnetic material to achieve superior frequency stability and reduced phase noise. Like many low phase noise oscillators, a cavity magnonic oscillator faces the challenge that its narrow resonance profile is not well suited for injection locking amplification. This work presents an improved design for such an oscillator configured as an injection locking amplifier(ILA) with an extended lock range. The proposed design features a two-stage architecture, consisting of a pre-amplification oscillator and a cavity magnonic oscillator, separated by an isolator to prevent backward locking.By optimizing the circuit parameters of each stage, the proposed design achieved an order of magnitude increase in lock range, when compared to its predecessors, all while preserving the phase noise quality of the input, making it well-suited for narrowband, sensitive signal amplification. Furthermore, this work provides a method for using oscillators with high spectral purity as injection locking amplifiers.
基金supported by the National Natural Science Foundation of China(42474003,42074007)the Fundamental Research Funds for the Central Universities(2042023kfyq01)。
文摘As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from different studies,this study constructs a refined block model(including Qilian,Alxa,Ordos,Xining,Haiyuan,and Lanzhou blocks)and uses the grid search and simulated annealing methods to invert GPS data for slip rate and locking degree of the Haiyuan fault zone.The results are as follows:(1)The sinistral slip rates in the western,middle,and eastern segments are 4.93-5.22 mm/a,1.52-4.94 mm/a,and 0.43-1.18 mm/a,decreasing eastward on the whole,while the compression rates are 0.45-1.26 mm/a,0.58-2.62 mm/a,and3.52-4.48 mm/a,increasing eastward on the whole.(2)The locking depth of the western segment increases from about 5 km to about 20 km eastward;the middle segment decreases and then increases eastward;the eastern segment concentrates at about 20 km(PHI is about 0.86).(3)The slip deficit is relatively higher in the Lenglongling,Jinqianghe,Maomaoshan,and Liupanshan faults(averaging about 3.42 mm/a,4.16 mm/a,4.23 mm/a,and 3.43 mm/a within 20 km).(4)The Qilian,Alxa,Xining,Lanzhou,and Haiyuan blocks rotate clockwise,while the Ordos block rotates counterclockwise.Additionally,by comparing different block models,the Haiyuan block should be considered independently.The Haiyuan fault zone adjusts surrounding block movements and uplifts Liupanshan mountain tectonically.The results can provide important references for understanding the regional earthquake risk and deformation mechanism.
基金supported by the DST-SERB and VSSC,ISRO of the project titled“Functionality Enhancement through Design and Development of Advanced Finite Element Algorithms for STR tools”under IMPRINT.IIC(IMP/2019/000276)scheme.
文摘Rubber-like materials that are commonly used in structural applications are modelled using hyperelastic material models.Most of the hyperelastic materials are nearly incompressible,which poses challenges,i.e.,volumetric locking during numerical modelling.There exist many formulations in the context of the finite element method,among which the mixed displacementpressure formulation is robust.However,such a displacement-pressure formulation is less explored in meshfree methods,which mitigates the problem associated with mesh distortion during large deformation.This work addresses this issue of alleviating volumetric locking in the element-free Galerkin method(EFGM),which is one of the popular meshfree methods.A two-field mixed variational formulation using the perturbed Lagrangian approach within the EFGM framework is proposed for modelling nearly incompressible hyperelastic material models,such as Neo-Hookean and Mooney-Rivlin.Taking advantage of the meshless nature of the EFGM,this work introduces a unique approach by randomly distributing pressure nodes across the geometry,following specific guidelines.A wide spectrum of problems involving bending,tension,compression,and contact is solved using two approaches of the proposed displacement-pressure node formulation involving regular and irregular pressure node distribution.It is observed that both approaches give accurate results compared to the reference results,though the latter offers flexibility in the pressure nodal distribution.
文摘BACKGROUND Proximal humerus fractures(PHFs)are common,especially in the elderly,and optimal surgical management remains debated.This study compares clinical,functional,and radiographic outcomes of deltoid split(DS)vs deltopectoral(DP)approaches in PHFs treated with locking plates.AIM To evaluate and compare the clinical,functional,and radiographic outcomes-as well as postoperative complication rates-associated with the DS vs the DP surgical approach in the open reduction and internal fixation(ORIF)of PHFs using locking plate constructs.METHODS A multicenter retrospective study of 120 patients undergoing ORIF for closed Neer type II-IV PHFs between January 2023 and December 2023.Patients were grouped by surgical approach[DS(n=70),DP(n=50)].Outcome measures included Numeric Rating Scale(NRS)for pain,Quick-Disabilities in Arm,Shoulder,and Hand questionnaire(QuickDASH),Constant-Murley score,Short Form Health Survey-12v2,and radiographic alignment.Complication rates were recorded.Statistical significance was defined as P<0.05.RESULTS Early outcomes favored the DS group:(1)Lower NRS(3.1 vs 5.9);(2)Higher Constant-Murley(68.2 vs 50.5);and(3)Better QuickDASH(25.4 vs 37.1).Complication rate was lower in the DS group(1.66%vs 5.81%).Radiographic outcomes were comparable.Long-term results were similar between groups.CONCLUSION While both approaches yield satisfactory long-term outcomes,the DS approach is associated with faster early recovery and fewer complications,supporting its use in selected cases.
基金supported by the National Natural Science Foundation of China(Grant Nos.12275240,12261131495,and 12475008)the Natural Science Foundation of Zhejiang Province(Grant No.LY24A050002).
文摘Fiber optic sensing technology,with its low transmission loss,wide bandwidth,and broad dynamic range,offers significant advantages for high-sensitivity measurements.In this study,a multi-band soliton modulation system for stress sensing is proposed,utilizing Ti_(3)C_(2)T_(x)to generate ultrashort pulses.By applying stress to microfibers,dichromatic periodic multisoliton mode-locking at 1530 nm and 1555.2 nm is achieved.Vibrational mechanical stress further modulates cross-phase interactions between solitons,inducing higher-order bound solitons with small-amplitude oscillations.These dynamic processes reveal complex nonlinear optical behaviors and enhance sensing capabilities.Additionally,the feasibility of stable mode-locking of Ti_(3)C_(2)T_(x)in a 1µm multimode cavity is analyzed using the multimode nonlinear Schrodinger equation,and multisoliton states are experimentally demonstrated by integrating a 1µm narrow-linewidth ultrafast multimode laser with a stressed microfiber.
基金supported by the National Major Scientific Instruments and Equipment Development Projects of China(No.41827808)the Major Program of the National Natural Science Foundation of China(No.42090055)Supported by Science and Technology Projects of Xizang Autonomous Region,China(No.XZ202402ZD0001)。
文摘In 2018,Baige,Xizang,witnessed two consecutive large-scale landslides,causing significant damage and drawing widespread attention.From March 2011 to February 2018,the Baige landslide exhibited a 50-m displacement without complete failure,culminating in a collapse in October 2018.The mechanisms behind its resistance to failure despite substantial deformation and the influence of the complex geo-structure within the tectonic mélange belt remain unclear.To address these questions,this study utilized a multidisciplinary approach,integrating on-site geological field mapping,surface deformation monitoring,multielectrode resistivity method,and deep displacement analysis.The aim was to evaluate the impact of the intricate geo-structure within the tectonic mélange belt on the Baige landslide events.Findings reveal that the landslide's geo-structure consists of structurally fractured,mesh-like rock masses,including heterogeneous lenticular rock masses and intermittent brittle shear zones distributed around the lens-shaped rock masses.The study underscores that the inhomogeneous and weakly deformed lenticular rock masses function as natural locked segments,governing the stability of the Baige landslide.Specifically,the relatively intact and hard granodiorite porphyry play a crucial role in locking the landslide's deformation.Deep displacement analysis indicates that the brittle shear zones act as the sliding surfaces.The progressive destruction of the locked segments and the gradual penetration of brittle shear zones,driven by gravitational potential energy,contribute to the landslide occurrence.This research provides critical insights into the formation mechanisms of large-scale landslides within tectonic mélange belts.
基金supported by the National Natural Science Foundation of China(Grant Nos.12434016 and 12474380)Science and Technology Project of Guangdong Province(Grant No.2020B0101-90001)+1 种基金the National Key Research and Development Program of China(Grant No.2023YFA1406900)the Natural Science Foundation of Guangdong Province(Grant No.2025A1515010714)。
文摘Spin-momentum locking is widely regarded as an inherent property of evanescent waves,where the transverse spin angular momentum is intrinsically tied to the wave's polarization.This principle is well established in systems such as surface plasmon polaritons,surface elastic waves,and other evanescent modes.Here,we theoretically unveil an anomalous breakdown of spin-momentum locking in evanescent electromagnetic waves at a metalgyromagnetic interface.We show that the hybrid polarization of the field induces two successive reversals of transverse spin near the interface—directly violating the conventional locking between spin and momentum.As a result,identical chiral sources placed at different heights above the interface excite evanescent waves propagating in opposite directions,defying standard expectations.This discovery challenges the presumed universality of spin-momentum locking and opens new degrees of freedom for controlling wave propagation in photonic and plasmonic systems.
基金The Project Supported by National Science Foundation of China
文摘The equivalent circuit of single-cavity multiple-device fundamentaloscillator(SCMDFO)and that of single-device harmonic oscillator(SDHO)proposed byK.Kurokawa and K.Solbach,respectively,are extended and applied to a single-cavitymultiple-device harmonic oscillator(SCMDHO).By means of describing the functions ofnonlinearity of Gunn diodes,the performances of the SCMDHO are analyzed.It is foundthat the voltage amplitudes are similar to those of SDHO,and the ratio of maximum pow-er of harmonic to that of fundamental is identical to that in SDHO when the devices havesame parameters.The harmonic injection locking behavior is also investigated.The injec-tion locking range is greater than that of SDHO if locking gain remains constant.A2-Gunn diode harmonic oscillator was designed.It delivers 30mW output power at103GHz.The mechanical tuning range is 4.15GHz when the output power remains morethan 10mW.The desired operation mode is stable.
基金The Natural Science Foundation of the Education Department of Henan Province (2009A1100032010A110005)+1 种基金the International Science and Technology Cooperation Project of Henan Provincethe Foundation of Henan University of Technology
文摘随着电力系统的发展,现行的IEC 60372"Locking devices for ball and socket couplings of string insulator units:Dimensions and tests"(Third edition)1984版已经无法涵盖和适应新的特高压大吨位绝缘子产品和技术的发展,包括对应于36和40两种新的联接标记的更高强度等级的绝缘子。笔者介绍了IEC TC36/MT21工作组维护IEC 60372标准的主要内容:包括结合国际工程实践经验,将已经被广泛应用的36、40两个联接标记加入到本标准中;研究是否增加锁紧销操作试验项目;研究并修改了原标准中L2和L5错误的问题;解决了28BW型锁紧销是否在本次修订中纳入标准的问题等。
基金Supported by the Key Research Project of StatePower Corporation (SPKJ 0l6-06)the Key Scientific ResearchProject of Hubei Province ( 2004AC101D31)
文摘Contact nonlinear theory was researched. Contact problem was transformed into optimization problem containing Lagrange multiplier, and unsymmetrical stiffness matrix was transformed into symmetrical stiffness matrix. A finite element analysis （FEA） model defining more than 300 contact pairs for long nut-short screw locking mechanism of a large-scale vertical gear-rack typed ship-lift was built. Using augmented Lagrange method and symmetry algorithm of contact element stiffness, the FEA model was analyzed, and the contact stress of contact interfaces and the von Mises stress of key parts were obtained. The results show that the design of the locking mechanism meets the requirement of engineering, and this method is effective for solving large stole nonlinear contact pairs.
基金Project supported by the National Basic Research Program of China(Grant No.2012CB921603)the National Natural Science Foundation of China(Grants Nos.11274209,61475090,61378039,and 61378013)the Research Project Supported by Shanxi Scholarship Council of China(Grant No.2014-009)
文摘We present a laser frequency locking to Rydberg transition with electromagnetically induced transparency（EIT）spectra in a room-temperature cesium vapor cell. Cesium levels 6S_（1/2）, 6P_（3/2）, and the n D_（5/2） state, compose a cascade three-level system, where a coupling laser drives Rydberg transition, and probe laser detects the EIT signal. The error signal, obtained by demodulating the EIT signal, is used to lock the coupling laser frequency to Rydberg transition. The laser frequency fluctuation, ~0.7 MHz, is obtained after locking on, with the minimum Allan variance to be 8.9 × 10^（-11）.This kind of locking method can be used to stabilize the laser frequency to the excited transition.
