The 8% （mass fraction） yttrium-partially-stabilized zirconia （8YSZ） ceramic was fabricated via liquid phase sintering at 1 200-1 400℃ by adding different mass ratios of CuO-16.7%TiO2 （molar fraction） as sinteri...The 8% （mass fraction） yttrium-partially-stabilized zirconia （8YSZ） ceramic was fabricated via liquid phase sintering at 1 200-1 400℃ by adding different mass ratios of CuO-16.7%TiO2 （molar fraction） as sintering aid. Relative density, microstructure, Vickers hardness and bending strength as a function of sintering temperature and additive content were investigated. The experiment results show that liquid phase sintering at low temperature can be realized through adding CUO-16.7% TiO2 to 8YSZ. The Vickers hardness and bending strength of samples with sintering aid are generally much higher than those of samples without sintering aid for all sintering temperatures, and increase with the increase of sintering temperature. When the addition content of CUO-16.7% TiO2 is beyond 0.5%, the relative density, Vickers hardness and bending strength decrease with the increase of the mass ratio of sintering aid. Low additions of sintering aid are beneficial to aiding densification; high additions of sintering aid are detrimental to the sintered properties mainly due to greater amounts of pores generated by the volatilization of oxygen with the eutectic reaction between copper oxide and titanium dioxide. It is found that the fine grain size and high relative density are two main reasons of the high bending strength and Vickers hardness of the materials.展开更多
Hexagonal boron nitride(h-BN)composite ceramics were prepared by hot pressing with the addition of Y2O3 and AlN.The effects of different Y2O3–AlN contents on microstructural evolution,mechanical properties and therma...Hexagonal boron nitride(h-BN)composite ceramics were prepared by hot pressing with the addition of Y2O3 and AlN.The effects of different Y2O3–AlN contents on microstructural evolution,mechanical properties and thermal diffusion coefficients of h-BN composite ceramics were investigated.The results indicate that Y2O3–AlN forms a liquid phase during the sintering process achieving a good wettability with h-BN grains.In pure h-BN ceramic and h-BN composite ceramic with 40 wt%Y2O3–AlN,the h-BN grains grow well when controlled through solid-phase and liquid-phase diffusion,respectively.With the increase in Y2O3–AlN content,mechanical properties and thermal diffusion coefficients of h-BN composite ceramics first decrease and then increase,and the properties of h-BN composite ceramic with 10 wt%Y2O3–AlN are the inflection points.Such properties are highly related to the phase compositions,porosity and microstructure.展开更多
In this work, network former SiO_2 and network intermediate Al_2O_3 were introduced into typical low-melting binary compositions CaO·B_2O_3, CaO·2B_2O_3, and BaO·B_2O_3 via an aqueous solid-state suspen...In this work, network former SiO_2 and network intermediate Al_2O_3 were introduced into typical low-melting binary compositions CaO·B_2O_3, CaO·2B_2O_3, and BaO·B_2O_3 via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950°C. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO–SiO_2–Al_2O_3–B_2O_3(M = Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al_(20)B_4O_(36), CaAl_2Si_2O_8, and BaAl_2Si_2O_8 and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.展开更多
The microstructure and properties of liquid-phase sintered 93W-4.9Ni-2.1Fe tungsten heavy alloys using ultra-fine tungsten powders (medium particle size of 700 nm) and original tungsten powders (medium particle size o...The microstructure and properties of liquid-phase sintered 93W-4.9Ni-2.1Fe tungsten heavy alloys using ultra-fine tungsten powders (medium particle size of 700 nm) and original tungsten powders (medium particle size of 3 μm) were investigated respectively. Commercial tungsten powders (original tungsten powders) were mechanically milled in a high-energy attritor mill for 35 h. Ultra-fine tungsten powders and commercial Ni, Fe powders were consolidated into green compacts by using CIP method and liquid-phase sintering at 1 465 ℃ for 30 min in the dissociated ammonia atmosphere. Liquid-phase sintered tungsten heavy alloys using ultra-fine tungsten powders exhibit full densification (above 99% in relative density) and higher strength and elongation compared with conventional liquid-phase sintered alloys using original tungsten powders due to lower sintering temperature at 1 465 ℃ and short sintering time. The mechanical properties of sintered tungsten heavy alloy are found to be mainly dependent on the particles size of raw tungsten powders and liquid-phase sintering temperature.展开更多
The cold sintering process(CSP)and Bi_(2)O_(3)-activated liquid-phase sintering(LPS)are combined to densify Mg-doped NASICON(Na_(3.256)Mg_(0.128)Zr_(1.872)Si_(2)PO_(12))to achieve high densities and conductivities at ...The cold sintering process(CSP)and Bi_(2)O_(3)-activated liquid-phase sintering(LPS)are combined to densify Mg-doped NASICON(Na_(3.256)Mg_(0.128)Zr_(1.872)Si_(2)PO_(12))to achieve high densities and conductivities at reduced temperatures.As an example,a cold-sintered specimen with the addition of 1.1wt%Bi_(2)O_(3)sintering additive achieved a high conductivity of 0.91 mS/cm(with~96%relative density)after annealing at 1000℃;this conductivity is>70%higher than that of a cold-sintered specimen without adding the Bi_(2)O_(3)sintering additive,and it is>700%of the conductivity of a dry-pressed counterpart with the same amount of Bi_(2)O_(3)added,all of which are subjected to the same heating profile.The highest conductivity achieved in this study via combining CSP and Bi_(2)O_(3)-activated LSP is>1.5 mS/cm.This study suggests an opportunity to combine the new CSP with the traditional LPS to sinter solid electrolytes to achieve high densities and conductivities at reduced temperatures.This combined CSP-LPS approach can be extended to a broad range of other materials to fabricate the“thermally fragile”solid electrolytes or solid-state battery systems,where reducing the processing temperature is often desirable.展开更多
Solid-state batteries(SSBs)will potentially offer increased energy density and,more importantly,improved safety for next generation lithium-ion(Li-ion)batteries.One enabling technology is solid-state composite cathode...Solid-state batteries(SSBs)will potentially offer increased energy density and,more importantly,improved safety for next generation lithium-ion(Li-ion)batteries.One enabling technology is solid-state composite cathodes with high operating voltage and area capacity.Current composite cathode manufacturing technologies,however,suffer from large interfacial resistance and low active mass loading that with excessive amounts of polymer electrolytes and conductive additives.Here,we report a liquidphase sintering technology that offers mixed ionic-electronic interphases and free-standing electrode architecture design,which eventually contribute to high area capacity.A small amount(~4 wt.%)of lithium hydroxide(LiOH)and boric acid(H_(3)BO_(3))with low melting point are utilized as sintering additives that infiltrate into single-crystal Ni-rich LiNi_(0.8)Mn_(0.1)Co_(0.1)(NMC811)particles at a moderately elevated temperature(~350℃)in a liquid state,which not only enable intimate physical contact but also promote the densification process.In addition,the liquid-phase additives react and transform to ionic-conductive lithium boron oxide,together with the indium tin oxide(ITO)nanoparticle coating,mixed ionic-electronic interphases of composite cathode are successfully fabricated.Furthermore,the liquid-phase sintering performed at high-temperature(~800℃)also enables the fabrication of highly dense and thick composite cathodes with a novel free-standing architecture.The promising performance characteristics of such composite cathodes,for example,delivering an area capacity above 8 mAh·cm^(−2) within a wide voltage window up to 4.4 V,open new opportunities for SSBs with a high energy density of 500 Wh·kg^(−1) for safer portable electronic and electrical transport.展开更多
The much slower progress in enhancing the thermoelectric performance of n-type Bi2Te3 than that of p-type Bi2Te3 based materials in the past decade hinders the widespread use in power generation and refrigeration. Her...The much slower progress in enhancing the thermoelectric performance of n-type Bi2Te3 than that of p-type Bi2Te3 based materials in the past decade hinders the widespread use in power generation and refrigeration. Here, a facile bottom-up solution-synthesis with spark plasma sintering(SPS) process has been developed to build n-type Bi2Te3-xSex bulk nanocomposites, which substantially improves the power factor and decreases the lattice thermal conductivity by tuning the interface scattering of phonons and electrons. The stoichiometric composition in ternary Bi2Te3-xSex nanocomposites is also tuned to optimize the carrier concentration and lattice thermal conductivity. The optimized bulk nanocomposite Bi2Te2.7Se0.3 exhibits a ZT of 1.1 at^371 K, which is comparable to the corresponding commercially available ingots. Our results demonstrate the great potential of the solution-processed n-type Bi2Te3-xSex nanocomposites for cost-effective thermoelectric applications.展开更多
Genotyping by Target Sequencing(GBTS)technology,known for its flexibility,high efficiency,high throughput,and low cost,has been increasingly employed in molecular breeding.However,there is still limited study on the d...Genotyping by Target Sequencing(GBTS)technology,known for its flexibility,high efficiency,high throughput,and low cost,has been increasingly employed in molecular breeding.However,there is still limited study on the design and development of high-throughput genotyping tools in watermelon.In this study,we identified 112000 high quality SNPs by analyzing the resequencing data of 43 cultivated watermelon accessions.11921 and 6094 SNPs were selected for developing two sets of watermelon liquid-phase chips with different marker densities,named Watermelon 10K and 5K,respectively.Furthermore,the SNPs and Indels of most mapped gene/QTLs for many agronomic important traits in watermelon were also integrated into the two chips for foreground selection.These chips have been tested using GBTS technology in various applications in watermelon.The genotyping of 76 accessions by Watermelon 5K liquid-phase chip showed an average detection rate of 99.28%and 81.78%for cultivated and wild watermelon accessions,respectively.This provided enough markers information for GWAS and two significant QTLs,ssc1.1 and ssc1.2,associated with soluble sugar content were detected.Furthermore,BSA-seq analysis for non-lobed leaf and dwarf traits were validated by liquid-phase chips,and the candidate region was consistent with our previous studies.Additionally,we precisely introduced the Cldw1 and Clbl genes into an elite inbred line WT2 using Watermelon 5K for assisted selection,resulting in the development of three new germplasm with good plant architecture.As a high-throughput genotyping liquid-phase SNP array,the Watermelon 10K and 5K chips will greatly facilitate functional studies and molecular breeding in watermelon.展开更多
A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS...A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS catalyst optimised through systematic composition and condition tuning,demonstrating exceptional performance with 95.5%C_(2)H_(2)conversion and sustaining over 91.1%activity along with nearly 100%selectivity for VCM during a continuous 900-h test.Using a combination of characterisation techniques,including UV–vis spectroscopy,FT-IR spectroscopy,X-ray photoelectron spectroscopy,singlecrystal X-ray diffraction,and X-ray absorption spectroscopy,along with density functional theory(DFT)calculations,the structure and dynamic behaviour of the active sites were thoroughly investigated under the synergistic influence of ligands and HCl.The results revealed that HCl activation induces a significant structural transformation of the active sites,leading to the formation of a hexacoordinate complex,Ru(CO)_(2)C_(12)(C_(6)H_(15)N·HCl)_(2).DFT calculations further elucidated the mechanism underlying active site formation,revealing that an increased electron density around the Ru centre and corresponding changes in its coordination environment play critical roles in enhancing catalyst stability and activity.This study contributes to a deeper understanding of the structural basis of active site evolution during acetylene hydrochlorination,offering both practical insights into industrial applications and foundational knowledge for advancing liquid-phase catalysis.展开更多
The preparation of dispersible MFI-type zeolite nanoparticles with open micropores is challenging.Herein,a rapid and effective ultrasound-assisted liquid-phase exfoliation method along with a freezedrying process for ...The preparation of dispersible MFI-type zeolite nanoparticles with open micropores is challenging.Herein,a rapid and effective ultrasound-assisted liquid-phase exfoliation method along with a freezedrying process for redispersion of calcined silicalite-1(S-1)zeolite nanoparticle aggregates using 3-aminopropanol as an exfoliating agent is demonstrated.The exfoliation of S-1 zeolite nanoparticles is characterized by X-ray diffraction,scanning electron microscopy and DLS particle size analysis.The effects of drying methods of as-synthesized zeolite nanoparticle suspension,zeolite contents in frozen nanoparticle suspension,exfoliating agent concentrations,and zeolite doses in ultrasonic suspension on exfoliation efficiency are systematically investigated.It is found that the S-1 zeolite nanoparticle(~70 nm)achieves a yield up to 95%through a 30 min ultrasonic exfoliation in a 3-aminopropanol solution along with a freeze-drying process.The proposed exfoliation mechanism involves two primary stages:vip molecule insertion followed by water expansion,both substantially enhanced by tip sonication.This work offers a comprehensive understanding of the exfoliation process,provides valuable insights into the dispersion of sintered zeolite nanoparticles.展开更多
Iron and steel industry is one of the main sources of air pollution emissions in China.The sintering process is an important link in the blast furnace ironmaking process,but it is also accompanied by a large number of...Iron and steel industry is one of the main sources of air pollution emissions in China.The sintering process is an important link in the blast furnace ironmaking process,but it is also accompanied by a large number of pollutants.Under the background of ultra-low emissions,iron and steel enterprises urgently need to upgrade their existing processes to address the existing process in practical application problems.In this study,a steel group in Gansu Province was taken as an example.By comparing and analyzing the pollutant emission characteristics before and after the ultra-low emission retrofit,the collaborative control effect of the combined process on SO_(2),NO_(x),particulate matter,and dioxins after the new retrofit was systematically evaluated.The results show that after the retrofit,the concentrations of particulate matter,SO_(2) and NO_(x) have dropped to near-zero levels,and the dioxin removal efficiency has reached 98.87%,with all indicators being better than the national ultra-low emission standards.The study confirms that the optimal combination of multi-pollutant collaborative treatment technologies is the key to achieving efficient emission reduction,among which selective catalytic reduction technology has a particularly significant synergistic removal effect on NO_(x) and dioxins.This study provides an important technical reference and practical basis for the ultra-low emission retrofit of the steel industry,and has important guiding significance for promoting the green retrofit of the industry.Its ultra-low emission retrofit is of great significance for achieving green and low-carbon development.展开更多
The use of high entropy alloy as a binder for tungsten heavy alloys offers potential advantages.The 95W-5CoCrFeMnNi alloys(95W-HEAs)were prepared via powder metallurgy at sintering temperatures of 1400−1550℃.The micr...The use of high entropy alloy as a binder for tungsten heavy alloys offers potential advantages.The 95W-5CoCrFeMnNi alloys(95W-HEAs)were prepared via powder metallurgy at sintering temperatures of 1400−1550℃.The microstructure analysis revealed that the tungsten phase in 95W-HEAs exhibited a nearly spherical morphology in the HEA binder matrix and the formation of a Cr−Mn oxide mixed phase was observed.The sintering temperature exerted a significant influence on the relative density,grain size,W−W contiguity,and mechanical properties of the alloys.The optimal performance was achieved when sintering at 1450℃,yielding a relative density of 96.61%,a W−W contiguity of 0.528,an average grain size of 18.97μm,a compressive strength of 2234.82 MPa,and a hardness of HV 400.6.The activation energy for the diffusion of tungsten in the liquid phase formed by HEA binder was calculated to be 354.514 kJ/mol,highlighting its role in controlling grain growth.展开更多
Powder paving is an intermediate process of selective laser sintering(SLS).The dimensional accuracy and mechanical properties of sintered components are directly affected by the quality of the powder paving process,wh...Powder paving is an intermediate process of selective laser sintering(SLS).The dimensional accuracy and mechanical properties of sintered components are directly affected by the quality of the powder paving process,which is closely related to the flow characteristics of the powder and the process parameters of powder paving.This study investigated the simulation and optimization of the nylon powder paving in SLS by combining a discrete-element-method numerical simulation with a process test.A dynamic model was established to describe the flow and paving process of nylon powder at a preheating temperature considering mesoscopic van der Waals and electrostatic forces.The effects of the physical parameters and ambient temperature on the flow characteristics of nylon powder were analyzed,and the intrinsic relationship between the physical parameters of nylon powder,the process parameters of powder paving,and the quality of the powder paving were explored.A multi-objective regression model of the quality of powder paving was established using the response surface methodology,and a genetic algorithm was adopted to optimize the quality of the powder paving.A scientific and intelligent database of the nylon powder paving process in SLS was constructed by matching the process parameters of powder paving and physical parameters of the nylon powder,and the level of the SLS process was improved.展开更多
This study investigated enhancing the wear resistance of Ti6Al4V alloys for medical applications by incorporating Ti C nanoreinforcements using advanced spark plasma sintering(SPS). The addition of up to 2.5wt% Ti C s...This study investigated enhancing the wear resistance of Ti6Al4V alloys for medical applications by incorporating Ti C nanoreinforcements using advanced spark plasma sintering(SPS). The addition of up to 2.5wt% Ti C significantly improved the mechanical properties, including a notable 18.2% increase in hardness(HV 332). Fretting wear tests against 316L stainless steel(SS316L) balls demonstrated a 20wt%–22wt% reduction in wear volume in the Ti6Al4V/Ti C composites compared with the monolithic alloy. Microstructural analysis revealed that Ti C reinforcement controlled the grain orientation and reduced the β-phase content, which contributed to enhanced mechanical properties. The monolithic alloy exhibited a Widmanstätten lamellar microstructure, while increasing the Ti C content modified the wear mechanisms from ploughing and adhesion(0–0.5wt%) to pitting and abrasion(1wt%–2.5wt%). At higher reinforcement levels, the formation of a robust oxide layer through tribo-oxide treatment effectively reduced the wear volume by minimizing the abrasive effects and plastic deformation. This study highlights the potential of SPS-mediated Ti C reinforcement as a transformative approach for improving the performance of Ti6Al4V alloys, paving the way for advanced medical applications.展开更多
Coke oven gas(COG)and natural gas(NG),both high-calorific by-products derived from the steel industry,have gained prominence as alternative fuels in the sintering process,thereby supporting dual objectives of emission...Coke oven gas(COG)and natural gas(NG),both high-calorific by-products derived from the steel industry,have gained prominence as alternative fuels in the sintering process,thereby supporting dual objectives of emission reduction and carbon neutrality.While existing research on hydrogen-rich gas injection has predominantly concentrated on conventional thin-bed sintering,investigations into its application within thick-bed sintering remain comparatively scarce.Thick-bed sintering,recognized for enhancing energy efficiency and increasing sinter output,encounters challenges such as uneven heat distribution and diminished permeability,which can negatively impact process efficiency and product quality.To address these issues,sinter pot experiments were conducted to assess the effects of NG and COG injection on thick-bed sintering performance.Findings reveal that NG injection in thick beds mirrors the behavior observed in conventional thin-bed sintering,effectively optimizing the process and achieving a carbon reduction potential exceeding 10%.In contrast,COG injection in thick-bed conditions demonstrates notable differences,substantially lowering the solid fuel consumption rate but detrimentally affecting sinter strength and overall production.However,by optimizing the timing of COG injection,it is feasible to improve sinter yield while concurrently reducing solid fuel usage.These outcomes provide valuable insights for the advancement of gas injection technologies in thick-bed sintering,thereby contributing to energy conservation and emission mitigation efforts within the sintering industry.展开更多
Pt nanoparticles entrapped in ordered mesoporous CMK-3 carbons with p6mm symmetry were prepared using a facile impregnation method, and the resulting materials were characterized using X-ray diffraction spectroscopy, ...Pt nanoparticles entrapped in ordered mesoporous CMK-3 carbons with p6mm symmetry were prepared using a facile impregnation method, and the resulting materials were characterized using X-ray diffraction spectroscopy, N2 adsorption-desorption, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The Pt nanoparticles were highly dispersed in the CMK-3 with 43.7% dispersion. The Pt/CMK-3 catalyst was an effective catalyst for the liquid-phase hydrogenation of nitrobenzene and its derivatives under the experimental conditions studied here. The Pt/CMK-3 catalyst was more active than commercial Pt/C catalyst in most cases. A highest turnover frequency of 43.8 s-1 was measured when the Pt/CMK-3 catalyst was applied for the hydrogenation of 2-methyl-nitrobenzene in ethanol under optimal conditions. It is worthy of note that the Pt/CMK-3 catalyst could be recycled easily, and could be reused at least fourteen times without any loss in activity or selectivity for the hydrogenation of nitrobenzene in ethanol.展开更多
Liquid phase oxidation of toluene is an environmental benign route for the production of benzoic acid.In a φ48mm bubble column reactor,the commercial process of toluene liquid phase oxidation was conducted with Co(CH...Liquid phase oxidation of toluene is an environmental benign route for the production of benzoic acid.In a φ48mm bubble column reactor,the commercial process of toluene liquid phase oxidation was conducted with Co(CH3COO)2.4H2O as catalyst.The Co2+ concentration [Co2+] was determined by extraction spectrophotometry and hereby the Co3+ concentration [Co3+] was obtained by mass balance.The results showed that [Co3+] reached the maximum at about 25-30min.[Co3+] increased with increasing Co catalyst amount at total Co concentration<150 mg.L-1 of toluene.The conversion of toluene,yield and selectivity of benzoic acid increased with the increasing [Co3+/Co2+] max.A high [Co3+] and a high [Co3+]/[Co2+] ratio are beneficial to the reaction.展开更多
The homogeneous liquid was separated into two phases, （Fe, Co）-rich LI and Cu-rich L2, once the melt was undercooled below a liquid-phase separation temperature Tsep. If the duration from Tsep to Tsl （solidificatio...The homogeneous liquid was separated into two phases, （Fe, Co）-rich LI and Cu-rich L2, once the melt was undercooled below a liquid-phase separation temperature Tsep. If the duration from Tsep to Tsl （solidification temperature of LI phase）, termed the liquid-phase separation interval Δt, exceeded a critical value, an eggtype structure was observed. By utilizing differential thermal analyses （DTA）, the solidification process of the undercooled Fe-Co-Cu alloys was studied. Additionally, an immiscible boundary was obtained, which was a convex parabola with a symmetrical axis of XCu=0.52. Depending on the relative amounts of LI and L2, the minor phase was nucleated firstly to form liquid droplets and separated from the original liquids at the beginning of liquid-phase separation.展开更多
The liquid-phase furfural （FAL） hydrogenation to furfuryl alcohol （FOL） and tetrahydrofurfuryl alcohol （THFOL） was investigated using sulfonate group （-SO3H） grafted activated carbon （AC） supported Ni cataly...The liquid-phase furfural （FAL） hydrogenation to furfuryl alcohol （FOL） and tetrahydrofurfuryl alcohol （THFOL） was investigated using sulfonate group （-SO3H） grafted activated carbon （AC） supported Ni catalyst, which was prepared and activated simultaneously by liquid phase reduction method. This functionalized nickel catalyst demonstrated an enhanced catalytic performance for selective hydrogenation of FAL, in which almost 100% FOL （〈80℃） and THFOL （〉100℃） selectivity with complete conversion was obtained, respectively. More importantly, the conversion of transfer hydrogenation of FAL to FOL also can reach almost 100% under optimal conditions （140℃, 4.0h）. The effect of -SO3H was evaluated and systematically analyzed by the combination of reaction performance and physico-chemical characterizations. Cycling test proved the prepared catalyst could be recycled and reused for several times without noticeably reducing catalytic activity of hvdrogenation.展开更多
The kinetics of liquid-phase hydrogenation of toluene catalyzed by MlNi_5 was studied by investigating the influences of the reaction temperature and pressure on the mass transfer-reaction processes inside the slurry....The kinetics of liquid-phase hydrogenation of toluene catalyzed by MlNi_5 was studied by investigating the influences of the reaction temperature and pressure on the mass transfer-reaction processes inside the slurry. The results show that the reaction rate accelerates when the reaction temperature increases, and reaches its maximum at about 490 K, but if temperature is higher than 510 K, the reaction rate decreases rapidly. The whole reaction process is controlled by the reaction at the surface of the catalyst particles. The mass transfer resistance at gas-liquid interface and that from the bulk liquid phase to the surface of the catalyst particle can be neglected. The apparent reaction rate is zero order for toluene concentration and first order for hydrogen concentration in the liquid phase. The kinetic model is obtained. The kinetic model fits the experimental data very well. The apparent activation energy of the hydrogen absorption reaction of MlNi_5-toluene slurry system is 41.01 kJ·mol^(-1).展开更多
基金Project(200805331062) supported by the Research Fund for the Doctoral Program of Higher Education of ChinaProject(2010FJ4061) supported by the Science and Technology Program of Hunan Province,China
文摘The 8% （mass fraction） yttrium-partially-stabilized zirconia （8YSZ） ceramic was fabricated via liquid phase sintering at 1 200-1 400℃ by adding different mass ratios of CuO-16.7%TiO2 （molar fraction） as sintering aid. Relative density, microstructure, Vickers hardness and bending strength as a function of sintering temperature and additive content were investigated. The experiment results show that liquid phase sintering at low temperature can be realized through adding CUO-16.7% TiO2 to 8YSZ. The Vickers hardness and bending strength of samples with sintering aid are generally much higher than those of samples without sintering aid for all sintering temperatures, and increase with the increase of sintering temperature. When the addition content of CUO-16.7% TiO2 is beyond 0.5%, the relative density, Vickers hardness and bending strength decrease with the increase of the mass ratio of sintering aid. Low additions of sintering aid are beneficial to aiding densification; high additions of sintering aid are detrimental to the sintered properties mainly due to greater amounts of pores generated by the volatilization of oxygen with the eutectic reaction between copper oxide and titanium dioxide. It is found that the fine grain size and high relative density are two main reasons of the high bending strength and Vickers hardness of the materials.
基金financially supported by the National Key Research and Development Program of China(No.2017YFB0703200)the National Natural Science Foundation of China(Nos.51672060,51621091 and 51372050)。
文摘Hexagonal boron nitride(h-BN)composite ceramics were prepared by hot pressing with the addition of Y2O3 and AlN.The effects of different Y2O3–AlN contents on microstructural evolution,mechanical properties and thermal diffusion coefficients of h-BN composite ceramics were investigated.The results indicate that Y2O3–AlN forms a liquid phase during the sintering process achieving a good wettability with h-BN grains.In pure h-BN ceramic and h-BN composite ceramic with 40 wt%Y2O3–AlN,the h-BN grains grow well when controlled through solid-phase and liquid-phase diffusion,respectively.With the increase in Y2O3–AlN content,mechanical properties and thermal diffusion coefficients of h-BN composite ceramics first decrease and then increase,and the properties of h-BN composite ceramic with 10 wt%Y2O3–AlN are the inflection points.Such properties are highly related to the phase compositions,porosity and microstructure.
基金financially supported by the Fundamental Research Funds for the Central Universities of China(No.A0920502051513-5)
文摘In this work, network former SiO_2 and network intermediate Al_2O_3 were introduced into typical low-melting binary compositions CaO·B_2O_3, CaO·2B_2O_3, and BaO·B_2O_3 via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950°C. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO–SiO_2–Al_2O_3–B_2O_3(M = Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al_(20)B_4O_(36), CaAl_2Si_2O_8, and BaAl_2Si_2O_8 and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.
文摘The microstructure and properties of liquid-phase sintered 93W-4.9Ni-2.1Fe tungsten heavy alloys using ultra-fine tungsten powders (medium particle size of 700 nm) and original tungsten powders (medium particle size of 3 μm) were investigated respectively. Commercial tungsten powders (original tungsten powders) were mechanically milled in a high-energy attritor mill for 35 h. Ultra-fine tungsten powders and commercial Ni, Fe powders were consolidated into green compacts by using CIP method and liquid-phase sintering at 1 465 ℃ for 30 min in the dissociated ammonia atmosphere. Liquid-phase sintered tungsten heavy alloys using ultra-fine tungsten powders exhibit full densification (above 99% in relative density) and higher strength and elongation compared with conventional liquid-phase sintered alloys using original tungsten powders due to lower sintering temperature at 1 465 ℃ and short sintering time. The mechanical properties of sintered tungsten heavy alloy are found to be mainly dependent on the particles size of raw tungsten powders and liquid-phase sintering temperature.
基金acknowledge partial support by a Vannevar Bush Faculty Fellowship sponsored by the Basic Research Office of the Assistant Secretary of Defense for Research and Engineering and funded by the Office of Naval Research through grant N00014-16-1-2569.
文摘The cold sintering process(CSP)and Bi_(2)O_(3)-activated liquid-phase sintering(LPS)are combined to densify Mg-doped NASICON(Na_(3.256)Mg_(0.128)Zr_(1.872)Si_(2)PO_(12))to achieve high densities and conductivities at reduced temperatures.As an example,a cold-sintered specimen with the addition of 1.1wt%Bi_(2)O_(3)sintering additive achieved a high conductivity of 0.91 mS/cm(with~96%relative density)after annealing at 1000℃;this conductivity is>70%higher than that of a cold-sintered specimen without adding the Bi_(2)O_(3)sintering additive,and it is>700%of the conductivity of a dry-pressed counterpart with the same amount of Bi_(2)O_(3)added,all of which are subjected to the same heating profile.The highest conductivity achieved in this study via combining CSP and Bi_(2)O_(3)-activated LSP is>1.5 mS/cm.This study suggests an opportunity to combine the new CSP with the traditional LPS to sinter solid electrolytes to achieve high densities and conductivities at reduced temperatures.This combined CSP-LPS approach can be extended to a broad range of other materials to fabricate the“thermally fragile”solid electrolytes or solid-state battery systems,where reducing the processing temperature is often desirable.
基金supported by Natural Science Foundation of Jiangsu Province(No.BK20200800)the National Natural Science Foundation of China(Nos.51902165,12004145,52072323,and 52122211)+2 种基金Natural Science Foundation of Jiangxi Province(Nos.20192ACBL2004 and 20212BAB214032)Nanjing Science&Technology Innovation Project for Personnel Studying AbroadPart of the calculations were supported by the Center for Computational Science and Engineering at Southern University of Science and Technology,and high-performance computing platform of Jinggangshan University.
文摘Solid-state batteries(SSBs)will potentially offer increased energy density and,more importantly,improved safety for next generation lithium-ion(Li-ion)batteries.One enabling technology is solid-state composite cathodes with high operating voltage and area capacity.Current composite cathode manufacturing technologies,however,suffer from large interfacial resistance and low active mass loading that with excessive amounts of polymer electrolytes and conductive additives.Here,we report a liquidphase sintering technology that offers mixed ionic-electronic interphases and free-standing electrode architecture design,which eventually contribute to high area capacity.A small amount(~4 wt.%)of lithium hydroxide(LiOH)and boric acid(H_(3)BO_(3))with low melting point are utilized as sintering additives that infiltrate into single-crystal Ni-rich LiNi_(0.8)Mn_(0.1)Co_(0.1)(NMC811)particles at a moderately elevated temperature(~350℃)in a liquid state,which not only enable intimate physical contact but also promote the densification process.In addition,the liquid-phase additives react and transform to ionic-conductive lithium boron oxide,together with the indium tin oxide(ITO)nanoparticle coating,mixed ionic-electronic interphases of composite cathode are successfully fabricated.Furthermore,the liquid-phase sintering performed at high-temperature(~800℃)also enables the fabrication of highly dense and thick composite cathodes with a novel free-standing architecture.The promising performance characteristics of such composite cathodes,for example,delivering an area capacity above 8 mAh·cm^(−2) within a wide voltage window up to 4.4 V,open new opportunities for SSBs with a high energy density of 500 Wh·kg^(−1) for safer portable electronic and electrical transport.
基金supported by the Natural Science Foundation of SZU (2017003)Shenzhen Science and Technology Research Grant (JCYJ20150324141711684)+2 种基金Singapore National Research Foundation (NRF-RF2009-06)an Investigator-ship Award (NRFNRFI2015-03)Ministry of Education (Singapore) via an AcRF Tier2 Grant (MOE2012-T2-2-086)
文摘The much slower progress in enhancing the thermoelectric performance of n-type Bi2Te3 than that of p-type Bi2Te3 based materials in the past decade hinders the widespread use in power generation and refrigeration. Here, a facile bottom-up solution-synthesis with spark plasma sintering(SPS) process has been developed to build n-type Bi2Te3-xSex bulk nanocomposites, which substantially improves the power factor and decreases the lattice thermal conductivity by tuning the interface scattering of phonons and electrons. The stoichiometric composition in ternary Bi2Te3-xSex nanocomposites is also tuned to optimize the carrier concentration and lattice thermal conductivity. The optimized bulk nanocomposite Bi2Te2.7Se0.3 exhibits a ZT of 1.1 at^371 K, which is comparable to the corresponding commercially available ingots. Our results demonstrate the great potential of the solution-processed n-type Bi2Te3-xSex nanocomposites for cost-effective thermoelectric applications.
基金supported by the National Natural Science Foundation of China(Grant Nos.32172602,32472739)the Major Science and Technology Project of Henan Province(Grant No.221100110400)+3 种基金the Funding of Joint Research on Agricultural Varietie Improvement of Henan Province(Grant No.2022010503)the Natural Science Foundation of Henan(Grant No.242300421030)the Key Scientifc and Technological Project of Henan Province(Grant Nos.242102111124,242102111115)the Key Research and Development Program of Xinjiang Uygur autonomous region(2023B02017-2).
文摘Genotyping by Target Sequencing(GBTS)technology,known for its flexibility,high efficiency,high throughput,and low cost,has been increasingly employed in molecular breeding.However,there is still limited study on the design and development of high-throughput genotyping tools in watermelon.In this study,we identified 112000 high quality SNPs by analyzing the resequencing data of 43 cultivated watermelon accessions.11921 and 6094 SNPs were selected for developing two sets of watermelon liquid-phase chips with different marker densities,named Watermelon 10K and 5K,respectively.Furthermore,the SNPs and Indels of most mapped gene/QTLs for many agronomic important traits in watermelon were also integrated into the two chips for foreground selection.These chips have been tested using GBTS technology in various applications in watermelon.The genotyping of 76 accessions by Watermelon 5K liquid-phase chip showed an average detection rate of 99.28%and 81.78%for cultivated and wild watermelon accessions,respectively.This provided enough markers information for GWAS and two significant QTLs,ssc1.1 and ssc1.2,associated with soluble sugar content were detected.Furthermore,BSA-seq analysis for non-lobed leaf and dwarf traits were validated by liquid-phase chips,and the candidate region was consistent with our previous studies.Additionally,we precisely introduced the Cldw1 and Clbl genes into an elite inbred line WT2 using Watermelon 5K for assisted selection,resulting in the development of three new germplasm with good plant architecture.As a high-throughput genotyping liquid-phase SNP array,the Watermelon 10K and 5K chips will greatly facilitate functional studies and molecular breeding in watermelon.
基金supported by the National Natural Science Foundation of China(No.22378308)Jing-Jin-Ji Regional Integrated Environmental Improvement-National Science and Technology Major Project(No.2024ZD1200301–2)the Scientific and Technological Project of Yunnan Precious Metal Laboratory(No.YPML2023050202)。
文摘A comprehensive understanding of the structure and dynamic evolution of catalytic active sites is vital for advancing the study of liquid-phase acetylene hydrochlorination.Here,we successfully developed a Ru-DIPEA/TMS catalyst optimised through systematic composition and condition tuning,demonstrating exceptional performance with 95.5%C_(2)H_(2)conversion and sustaining over 91.1%activity along with nearly 100%selectivity for VCM during a continuous 900-h test.Using a combination of characterisation techniques,including UV–vis spectroscopy,FT-IR spectroscopy,X-ray photoelectron spectroscopy,singlecrystal X-ray diffraction,and X-ray absorption spectroscopy,along with density functional theory(DFT)calculations,the structure and dynamic behaviour of the active sites were thoroughly investigated under the synergistic influence of ligands and HCl.The results revealed that HCl activation induces a significant structural transformation of the active sites,leading to the formation of a hexacoordinate complex,Ru(CO)_(2)C_(12)(C_(6)H_(15)N·HCl)_(2).DFT calculations further elucidated the mechanism underlying active site formation,revealing that an increased electron density around the Ru centre and corresponding changes in its coordination environment play critical roles in enhancing catalyst stability and activity.This study contributes to a deeper understanding of the structural basis of active site evolution during acetylene hydrochlorination,offering both practical insights into industrial applications and foundational knowledge for advancing liquid-phase catalysis.
基金supported by the Natural Science Foundation of Zhejiang Province,China(LD24B060002)National Key Research and Development Program of China(2021YFB3801102)the Fundamental Research Funds for the Central Universities(226-2024-00060).
文摘The preparation of dispersible MFI-type zeolite nanoparticles with open micropores is challenging.Herein,a rapid and effective ultrasound-assisted liquid-phase exfoliation method along with a freezedrying process for redispersion of calcined silicalite-1(S-1)zeolite nanoparticle aggregates using 3-aminopropanol as an exfoliating agent is demonstrated.The exfoliation of S-1 zeolite nanoparticles is characterized by X-ray diffraction,scanning electron microscopy and DLS particle size analysis.The effects of drying methods of as-synthesized zeolite nanoparticle suspension,zeolite contents in frozen nanoparticle suspension,exfoliating agent concentrations,and zeolite doses in ultrasonic suspension on exfoliation efficiency are systematically investigated.It is found that the S-1 zeolite nanoparticle(~70 nm)achieves a yield up to 95%through a 30 min ultrasonic exfoliation in a 3-aminopropanol solution along with a freeze-drying process.The proposed exfoliation mechanism involves two primary stages:vip molecule insertion followed by water expansion,both substantially enhanced by tip sonication.This work offers a comprehensive understanding of the exfoliation process,provides valuable insights into the dispersion of sintered zeolite nanoparticles.
基金supported by the Key Research and Development Program of Gansu Province(22YF7FA070)the National Natural Science Foundation of China(22406076,22466026)the Basic Research Project of Yunnan Province(202301BE070001-017,202401CF070139,202401AS070085)。
文摘Iron and steel industry is one of the main sources of air pollution emissions in China.The sintering process is an important link in the blast furnace ironmaking process,but it is also accompanied by a large number of pollutants.Under the background of ultra-low emissions,iron and steel enterprises urgently need to upgrade their existing processes to address the existing process in practical application problems.In this study,a steel group in Gansu Province was taken as an example.By comparing and analyzing the pollutant emission characteristics before and after the ultra-low emission retrofit,the collaborative control effect of the combined process on SO_(2),NO_(x),particulate matter,and dioxins after the new retrofit was systematically evaluated.The results show that after the retrofit,the concentrations of particulate matter,SO_(2) and NO_(x) have dropped to near-zero levels,and the dioxin removal efficiency has reached 98.87%,with all indicators being better than the national ultra-low emission standards.The study confirms that the optimal combination of multi-pollutant collaborative treatment technologies is the key to achieving efficient emission reduction,among which selective catalytic reduction technology has a particularly significant synergistic removal effect on NO_(x) and dioxins.This study provides an important technical reference and practical basis for the ultra-low emission retrofit of the steel industry,and has important guiding significance for promoting the green retrofit of the industry.Its ultra-low emission retrofit is of great significance for achieving green and low-carbon development.
基金supported by the National Natural Science Foundation of China(No.51874368)。
文摘The use of high entropy alloy as a binder for tungsten heavy alloys offers potential advantages.The 95W-5CoCrFeMnNi alloys(95W-HEAs)were prepared via powder metallurgy at sintering temperatures of 1400−1550℃.The microstructure analysis revealed that the tungsten phase in 95W-HEAs exhibited a nearly spherical morphology in the HEA binder matrix and the formation of a Cr−Mn oxide mixed phase was observed.The sintering temperature exerted a significant influence on the relative density,grain size,W−W contiguity,and mechanical properties of the alloys.The optimal performance was achieved when sintering at 1450℃,yielding a relative density of 96.61%,a W−W contiguity of 0.528,an average grain size of 18.97μm,a compressive strength of 2234.82 MPa,and a hardness of HV 400.6.The activation energy for the diffusion of tungsten in the liquid phase formed by HEA binder was calculated to be 354.514 kJ/mol,highlighting its role in controlling grain growth.
基金Supported by National Natural Science Foundation of China(Grant Nos.52375466,51975504)Guangdong Provincial Basic and Applied Basic Research Foundation(Grant No.2022A1515110862)+1 种基金Jiangsu Provincial Key Laboratory of Precision and Micro-Manufacturing Technology(Grant No.JSKL2223K06)Hunan Provincial Excellent Youth Project of Education Department(Grant No.22B0109).
文摘Powder paving is an intermediate process of selective laser sintering(SLS).The dimensional accuracy and mechanical properties of sintered components are directly affected by the quality of the powder paving process,which is closely related to the flow characteristics of the powder and the process parameters of powder paving.This study investigated the simulation and optimization of the nylon powder paving in SLS by combining a discrete-element-method numerical simulation with a process test.A dynamic model was established to describe the flow and paving process of nylon powder at a preheating temperature considering mesoscopic van der Waals and electrostatic forces.The effects of the physical parameters and ambient temperature on the flow characteristics of nylon powder were analyzed,and the intrinsic relationship between the physical parameters of nylon powder,the process parameters of powder paving,and the quality of the powder paving were explored.A multi-objective regression model of the quality of powder paving was established using the response surface methodology,and a genetic algorithm was adopted to optimize the quality of the powder paving.A scientific and intelligent database of the nylon powder paving process in SLS was constructed by matching the process parameters of powder paving and physical parameters of the nylon powder,and the level of the SLS process was improved.
文摘This study investigated enhancing the wear resistance of Ti6Al4V alloys for medical applications by incorporating Ti C nanoreinforcements using advanced spark plasma sintering(SPS). The addition of up to 2.5wt% Ti C significantly improved the mechanical properties, including a notable 18.2% increase in hardness(HV 332). Fretting wear tests against 316L stainless steel(SS316L) balls demonstrated a 20wt%–22wt% reduction in wear volume in the Ti6Al4V/Ti C composites compared with the monolithic alloy. Microstructural analysis revealed that Ti C reinforcement controlled the grain orientation and reduced the β-phase content, which contributed to enhanced mechanical properties. The monolithic alloy exhibited a Widmanstätten lamellar microstructure, while increasing the Ti C content modified the wear mechanisms from ploughing and adhesion(0–0.5wt%) to pitting and abrasion(1wt%–2.5wt%). At higher reinforcement levels, the formation of a robust oxide layer through tribo-oxide treatment effectively reduced the wear volume by minimizing the abrasive effects and plastic deformation. This study highlights the potential of SPS-mediated Ti C reinforcement as a transformative approach for improving the performance of Ti6Al4V alloys, paving the way for advanced medical applications.
基金supported by the National Natural Science Foundation of China(Grant No.52474347)Postdoctoral Science Foundation of China(Grant No.2024T171095)the Fundamental Research Funds for the Central Universities(Grant No.2024CDJXY003).
文摘Coke oven gas(COG)and natural gas(NG),both high-calorific by-products derived from the steel industry,have gained prominence as alternative fuels in the sintering process,thereby supporting dual objectives of emission reduction and carbon neutrality.While existing research on hydrogen-rich gas injection has predominantly concentrated on conventional thin-bed sintering,investigations into its application within thick-bed sintering remain comparatively scarce.Thick-bed sintering,recognized for enhancing energy efficiency and increasing sinter output,encounters challenges such as uneven heat distribution and diminished permeability,which can negatively impact process efficiency and product quality.To address these issues,sinter pot experiments were conducted to assess the effects of NG and COG injection on thick-bed sintering performance.Findings reveal that NG injection in thick beds mirrors the behavior observed in conventional thin-bed sintering,effectively optimizing the process and achieving a carbon reduction potential exceeding 10%.In contrast,COG injection in thick-bed conditions demonstrates notable differences,substantially lowering the solid fuel consumption rate but detrimentally affecting sinter strength and overall production.However,by optimizing the timing of COG injection,it is feasible to improve sinter yield while concurrently reducing solid fuel usage.These outcomes provide valuable insights for the advancement of gas injection technologies in thick-bed sintering,thereby contributing to energy conservation and emission mitigation efforts within the sintering industry.
基金supported by the National Natural Science Foundation of China(21273076 and 21373089)the Open Research Fund of Top Key Discipline of Chemistry in Zhejiang Provincial Colleges and Key Laboratory of the Ministry of Education for Catalysis Materials(Zhejiang Normal University,ZJHX2013)Shanghai Leading Academic Discipline Project (B409)~~
文摘Pt nanoparticles entrapped in ordered mesoporous CMK-3 carbons with p6mm symmetry were prepared using a facile impregnation method, and the resulting materials were characterized using X-ray diffraction spectroscopy, N2 adsorption-desorption, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The Pt nanoparticles were highly dispersed in the CMK-3 with 43.7% dispersion. The Pt/CMK-3 catalyst was an effective catalyst for the liquid-phase hydrogenation of nitrobenzene and its derivatives under the experimental conditions studied here. The Pt/CMK-3 catalyst was more active than commercial Pt/C catalyst in most cases. A highest turnover frequency of 43.8 s-1 was measured when the Pt/CMK-3 catalyst was applied for the hydrogenation of 2-methyl-nitrobenzene in ethanol under optimal conditions. It is worthy of note that the Pt/CMK-3 catalyst could be recycled easily, and could be reused at least fourteen times without any loss in activity or selectivity for the hydrogenation of nitrobenzene in ethanol.
基金Supported by the National Natural Science Foundation of China （20576081, 20736009） and the Ph.D. Programs Foundation of Ministry of Education of China （20070610128）.
文摘Liquid phase oxidation of toluene is an environmental benign route for the production of benzoic acid.In a φ48mm bubble column reactor,the commercial process of toluene liquid phase oxidation was conducted with Co(CH3COO)2.4H2O as catalyst.The Co2+ concentration [Co2+] was determined by extraction spectrophotometry and hereby the Co3+ concentration [Co3+] was obtained by mass balance.The results showed that [Co3+] reached the maximum at about 25-30min.[Co3+] increased with increasing Co catalyst amount at total Co concentration<150 mg.L-1 of toluene.The conversion of toluene,yield and selectivity of benzoic acid increased with the increasing [Co3+/Co2+] max.A high [Co3+] and a high [Co3+]/[Co2+] ratio are beneficial to the reaction.
基金supported by the Natural Science Foundation of China (Grant No.50771084)the Natural Science Foundation of the Education Department of Jiangsu province,China (Grant No.09KJB430004)
文摘The homogeneous liquid was separated into two phases, （Fe, Co）-rich LI and Cu-rich L2, once the melt was undercooled below a liquid-phase separation temperature Tsep. If the duration from Tsep to Tsl （solidification temperature of LI phase）, termed the liquid-phase separation interval Δt, exceeded a critical value, an eggtype structure was observed. By utilizing differential thermal analyses （DTA）, the solidification process of the undercooled Fe-Co-Cu alloys was studied. Additionally, an immiscible boundary was obtained, which was a convex parabola with a symmetrical axis of XCu=0.52. Depending on the relative amounts of LI and L2, the minor phase was nucleated firstly to form liquid droplets and separated from the original liquids at the beginning of liquid-phase separation.
基金the National Natural Science Foundation of China (Nos. 51502297, 51372248, and 51432009)Instrument Developing Project of the Chinese Academy of Sciences (No. yz201421)
文摘The liquid-phase furfural （FAL） hydrogenation to furfuryl alcohol （FOL） and tetrahydrofurfuryl alcohol （THFOL） was investigated using sulfonate group （-SO3H） grafted activated carbon （AC） supported Ni catalyst, which was prepared and activated simultaneously by liquid phase reduction method. This functionalized nickel catalyst demonstrated an enhanced catalytic performance for selective hydrogenation of FAL, in which almost 100% FOL （〈80℃） and THFOL （〉100℃） selectivity with complete conversion was obtained, respectively. More importantly, the conversion of transfer hydrogenation of FAL to FOL also can reach almost 100% under optimal conditions （140℃, 4.0h）. The effect of -SO3H was evaluated and systematically analyzed by the combination of reaction performance and physico-chemical characterizations. Cycling test proved the prepared catalyst could be recycled and reused for several times without noticeably reducing catalytic activity of hvdrogenation.
文摘The kinetics of liquid-phase hydrogenation of toluene catalyzed by MlNi_5 was studied by investigating the influences of the reaction temperature and pressure on the mass transfer-reaction processes inside the slurry. The results show that the reaction rate accelerates when the reaction temperature increases, and reaches its maximum at about 490 K, but if temperature is higher than 510 K, the reaction rate decreases rapidly. The whole reaction process is controlled by the reaction at the surface of the catalyst particles. The mass transfer resistance at gas-liquid interface and that from the bulk liquid phase to the surface of the catalyst particle can be neglected. The apparent reaction rate is zero order for toluene concentration and first order for hydrogen concentration in the liquid phase. The kinetic model is obtained. The kinetic model fits the experimental data very well. The apparent activation energy of the hydrogen absorption reaction of MlNi_5-toluene slurry system is 41.01 kJ·mol^(-1).
