Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly...Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly permeable gradient phenolic membranes with tight selectivity are used as substrates to prepare TFC membranes with high permeances by the layer-by-layer assembly method. The negatively charged phenolic substrates are alternately assembled with polycation polyethylenimine(PEI) and polyanion poly(acrylic acid)(PAA)as a result of electrostatic interactions, forming thin and compact PEI/PAA layers tightly attached to the substrate surface. Benefiting from the high permeances and tight surface pores of the gradient nanoporous structures of the substrates, the produced PEI/PAA membranes exhibit a permeance up to 506 L? m-2?h-1?MPa-1, which is ~2–10 times higher than that of other membranes with similar rejections. The PEI/PAA membranes are capable of retaining N 96.1% of negatively charged dyes following the mechanism of electrostatic repulsion. We demonstrate that the membranes can also separate positively and neutrally charged dyes from water via other mechanisms.This work opens a new avenue for the design and preparation of high-flux NF membranes, which is also applicable to enhance the permeance of other TFC membranes.展开更多
A simple and controllable layer-by-layer （LBL） assembly method was proposed for the construction of reagentless biosensors based on electrostatic interaction between functional multiwall carbon nanotubes （MWNTs） a...A simple and controllable layer-by-layer （LBL） assembly method was proposed for the construction of reagentless biosensors based on electrostatic interaction between functional multiwall carbon nanotubes （MWNTs） and enzyme-mediator biocomposites. The carboxylated MWNTs were wrapped with polycations poly（allylamine hydrochloride） （PAH） and the resulting PAH-MWNTs were well dispersed and positively charged. As a water-soluble dye methylene blue （MB） could mix well with horseradish peroxidase （HRP） to form a biocompatible and negativelycharged HRP-MB biocomposite. A （PAH-MWNTs/HRP-MB）, bionanomultilayer was then prepared by electrostatic LBL assembly of PAH-MWNTs and HRP-MB on a polyelectrolyte precursor film-modified Au electrode. Due to the excellent biocompatibility of HRP-MB biocomposite and the uniform LBL assembly, the immobilized HRP could retain its natural bioactivity and MB could efficiently shuttle electrons between HRP and the electrode. The incorporation of MWNTs in the bionanomultilayer enhanced the surface coverage concentration of the electroactive enzyme and increased the catalytic current response of the electrode. The proposed biosensor displayed a fast response （2 s） to hydrogen peroxide with a low detection limit of 2.0× 10^-7 mol/L （S/N=3）. This work provided a versatile platform in the further development of reagentless biosensors.展开更多
Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic a...Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic acid）（PSS） and poly（diallyl-dimethylammonium chloride）（PDADMAC） to improve the anchoring of the Ti O2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic Ti O2 nanoparticles to construct Ti O2/PDADMAC bilayer in the Lb L fashion. The number of deposited Ti O2/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust Ti O2 loading. The Lb L technique showed higher Ti O2 loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue（MB）. Results showed that the Ti O2 modified fibers exhibited excellent photocatalytic activity efficiency similar to that of Ti O2 powder dispersed in solution. The deposition of Ti O23 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr.Ti O2-Lb L constructions also preserved Ti O2 adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of Ti O2 particles from the substrate outer surface. However, even in the third cycle, the Ti O2 modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.展开更多
An eleetrochromic variable optical attenuator （ECVOA） was fabricated by layer-by-layer （LBL） assembly of disodium N,N-bis（p-sulfonatophenyl）naphthalenedicarboximide （Naph-SO3Na） and common cationic polymer pol...An eleetrochromic variable optical attenuator （ECVOA） was fabricated by layer-by-layer （LBL） assembly of disodium N,N-bis（p-sulfonatophenyl）naphthalenedicarboximide （Naph-SO3Na） and common cationic polymer poly（diallyldimethylammonium） chloride （PDDA）. The UV-Vis absorption spectra of the multilayer films revealed that approximately an equal amount of Naph-SO3Na was assembled in each deposition cycle. Upon one-electron reduction, multilayer films exhibited intense absorption around 452 nm and also a broad absorption band from 1200 nm to 1900 nm. Owing to the improved ionic conductivity, the optical attenuation at 1550 nm of the films showed rapid response time and reached 1.3 dB/μm within 5 s. These results indicate that layer-by-layer assembly could be an effective method for the preparation of ECVOA operating in near infrared region.展开更多
The layer-by-layer assembly of graphene oxide and diazoresin is carried out via the electrostatic and hydrogen bond interactions on planar substrates and colloidal templates.The successful planar and spherical growth ...The layer-by-layer assembly of graphene oxide and diazoresin is carried out via the electrostatic and hydrogen bond interactions on planar substrates and colloidal templates.The successful planar and spherical growth of multilayer could be investigated by UV-vis spectrophotometry and scanning electron microscopy,respectively.Subsequent UV irradiation or heating would convert the ionic bonds and hydrogen bonds to covalent bands,which significantly improves the stability of the multilayer composite against solvent etching.For the cross-linked core-shell composites,the template cores could be removed by dissolution and hollow microspheres are obtained.展开更多
The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batterie...The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^(-2) delivers a stable area capacity of 6.6 mAh cm^(-2) over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^(-2) over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.展开更多
Metal oxide semiconductor materials such as ZnO have tremendous potential as light absorbers for photocatalysed electrodes in the electrochemical reduction of water. Promoters such as rGO have been added to reduce the...Metal oxide semiconductor materials such as ZnO have tremendous potential as light absorbers for photocatalysed electrodes in the electrochemical reduction of water. Promoters such as rGO have been added to reduce the recombination losses of charge carriers and improve its photoelectrochemical activity. In this study, the effect of layer ordering on the charge transfer properties of rGO-hybridised ZnO sandwich thin films for the photo-catalysed electrochemical reduction of water was investigated. rGO-hybridised ZnO sandwich thin films were prepared via a facile electrode position technique using a layer-by-layer approach. The thin films were analysed using FESEM, XRD, Raman, PL, UV–vis, EIS and CV techniques to investigate its morphological, optical and electrochemical properties. The FESEM images show the formation of distinct layers of rGO and ZnO nanorods/flakes via the layer-by-layer method. XRD confirmed the wurtzite structure of ZnO. PL spectroscopy revealed a reduction of photoemission intensity in the visible region（580 nm） when rGO was incorporated into the ZnO thin film. Among the six thin films prepared, ZnO/rGO showed superior performance compared to the other thin films（0.964 m A/cm） due to the presence of graphene edges which participate as heterogenous electrocatalysts in the photocatalysed electrolysis of water. rGO also acts as electron acceptor, forming an n-p heterojunction which improves the activity of ZnO to oxidise water molecules to O2. EIS revealed that the application of rGO as back contact（rGO/ZnO, rGO/ZnO/rGO） reduces the charge transfer resistance of a semiconductor thin film. Alternatively, rGO as front contact（ZnO/rGO, rGO/ZnO/rGO） improves the photo-catalysed electrolysis of water through the participation of the rGO edges in the chemical activation of water. The findings from this study indicate that the layer ordering significantly affects the thin film＇s electrostatic properties and this understanding can be further advantageous for tunable applications.展开更多
To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnes...To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnesium alloy substrates by an in-situ hydrothermal method and well-defined multilayer coatings, consisting of gentamicin sulfate（GS） and poly（sodium 4-styrene sulfonate）（PSS）, were prepared via layer-by-layer（Lb L） assembly. The morphologies, chemical compositions and corrosion resistance of the obtained（PSS/GS）n/Mg sample were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, electrochemical methods and immersion tests. Finally, the bactericidal activity of（PSS/GS）n/Mg samples against Staphylococcus aureus was assessed by the zone of inhibition methods and plate-counting method. The so-synthesized composite coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance, which make them attractive as coatings for medical implanted devices.展开更多
With the development of modern science and technology, the construction industry is gradually moving towards an innovative development path. The requirements of modern prefabricated building design are not only the re...With the development of modern science and technology, the construction industry is gradually moving towards an innovative development path. The requirements of modern prefabricated building design are not only the requirements of safety and economy, but also the requirements of energy saving and innovation. BIM technology refers to building information model. By using BIM technology, designers can accurately find out the problems existing in prefabricated building design, quickly work out effective solutions, and reduce the incidence of various difficult problems in the construction process, thus improving the scientificity and rationality of prefabricated building design and comprehensively improving the quality of prefabricated building design schemes. Next, the article discusses the assembly building design method based on BIM technology.展开更多
The mechanical connection of aircraft structural parts is mainly mechanical connection. The quality of mechanical connection has an important impact on the service life of the whole aircraft. The automatic drilling sy...The mechanical connection of aircraft structural parts is mainly mechanical connection. The quality of mechanical connection has an important impact on the service life of the whole aircraft. The automatic drilling system of aircraft assembly is applied to the digital assembly of aircraft in aviation manufacturing engineering, which can greatly improve the assembly quality and efficiency. This paper studies and analyzes the advanced hole making technology and equipment in aircraft assembly for reference.展开更多
"Environmental protection concept" is the latest project construction concept put forward by Chinas construction industry in the market development. Reasonable, standardized and scientific use of green techn..."Environmental protection concept" is the latest project construction concept put forward by Chinas construction industry in the market development. Reasonable, standardized and scientific use of green technology in prefabricated building construction can not only bring into play the higher economic benefits of the building in the market, but also create a better social image for builders and construction units in the market. In order to implement this work, solve the extensive production problems existing in the early development of the construction industry in the market and reduce the problems of high energy consumption and heavy pollution caused by unreasonable construction technology.展开更多
Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg ...Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg alloy surface by layer-by-layer(LbL)assembly of chitosan(CHI)and poly-L-glutamic acid(PGA)by electrostatic attraction.The functionalized surfaces of the Mg alloys were characterized by field-emission scanning electron microscopy(FE-SEM),Fourier transform infrared(FT-IR)spectroscopy and electrochemical tests.The bactericidal activity of the samples against Staphylococcus aureus was assessed by the zone of plate-counting method.The obtained coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance.展开更多
A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photo...A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photoelectron spectrometry,Fourier transform infrared spectroscopy and field-emission scanning electron microscopy were utilized to represent the chemical compositions and surface morphologies of the coatings.Electrochemical tests and hydrogen evolution measurements were implemented to confirm the good corrosion resistance of the composite coating in artificial body fluid.Antimicrobial activity of the composite coatings was tested via the plate-counting method,and the cytotoxicity of the samples was appraised by MTT assay and Live/dead staining.A double action was put into effect for the composite coating,which the inner Mg(OH)2 coating plays the part of physical barrier,and the outer(CHI/DNA)5 coating is employed as an inducer to fabricate a biocompatible Ca-P corrosion product coating during immersion,making up for its thin thickness.Otherwise,the composite coating is also beneficial for the growth of bone,resulting from the biomineralization effect of the outer polyelectrolyte multilayer.The good antibacterial property of the(CHI/DNA)5/Mg(OH)2 coating is ascribed to the contact-killing strength of CHI.Thus,the obtained(CHI/DNA)5/Mg(OH)2 coating has a wide application prospect in the field of Mg-based bone implantation.展开更多
The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In...The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In this context,keratin fibers,as a waste from the tannery industry,represent a great opportunity for the development of green functional materials.In this paper,keratin fibers were surface functionalized using the Layer-by-Layer(LbL)deposition technique and then freeze-dried in order to obtain a lightweight,fire-resistant,and sustainable material.The LbL coating,made with chitosan and carboxymethylated cellulose nanofibers,is fundamental in enabling the formation of a self-sustained structure after freeze-drying.The prepared porous fiber networks(density 100 kg m^(-3))display a keratin fiber content greater than 95 wt%and can easily self-extinguish the flame during a flammability test in a vertical configuration.In addition,during forced combustion tests(50 kW m^(-2))the samples exhibited a reduction of 37% in heat release rate and a reduction of 75%in smoke production if compared with a commercial polyurethane foam.The results obtained represent an excellent opportunity for the development of fire-safe sustainable materials based on fiber wastes.展开更多
Inspired by the birch bark, which has multilayered structures, we fabricated layer-by-layer （LbL） assembled montmorillonite （MMT） and poly（p-aminostyrene） （PPAS） nanocomposites on cotton fiber curved surfaces ...Inspired by the birch bark, which has multilayered structures, we fabricated layer-by-layer （LbL） assembled montmorillonite （MMT） and poly（p-aminostyrene） （PPAS） nanocomposites on cotton fiber curved surfaces to provide protection from atomic oxygen （AO） erosion. The multilayer coated fibers had high flexibility, uniformity, defect free, ease of preparation and low cost. The AO erosion durability has been dramatically enhanced which was evidenced by testing in the ground-based AO effects simulation facility. And the dimension and surface morphologies of the fibers observed by SEM had few changes, indicating excellent AO erosion resistant ability of the coatings. These results provide us a new method to design fibrous materials exposed directly in low earth orbit environment.展开更多
We investigate the power-dependent luminescence of CdSe/ZnS semiconductor quantum dots closely packed layer- by-layer in the proximity of a silver nanorod array cavity. It is found that the emission peak shifts signif...We investigate the power-dependent luminescence of CdSe/ZnS semiconductor quantum dots closely packed layer- by-layer in the proximity of a silver nanorod array cavity. It is found that the emission peak shifts significantly to the longer wavelengths as the excitation power increases, especially when the longitudinal surface plasmon resonance of the Ag nanorod array cavity is adjusted to be close to the emission wavelength. The equivalent gain varies with the coating layer of CdSe/ZnS semiconductor quantum dots and the excitation power is also studied to explain this interesting spectrum-shifting effect. These findings could find applications in the dynamic information processing of active plasmonic and photonic nanodevices.展开更多
China's continuous economic progress, the deepening process of urbanization, and the gradual improvement of people's living standards have brought more opportunities for the development of the construction ind...China's continuous economic progress, the deepening process of urbanization, and the gradual improvement of people's living standards have brought more opportunities for the development of the construction industry. The number of construction projects is increasing, and the scale of projects is expanding. In order to meet the increasing demand of people for the number of buildings, the construction industry is developing and innovating, and the application of prefabricated building mode comes into being. Building curtain wall is an important part of prefabricated building. Glass curtain wall is widely used in practice. In order to improve the overall quality of prefabricated building engineering and the overall beauty of the building, we should attach great importance to the construction of prefabricated building curtain wall and adopt scientific curtain wall construction technology. Combined with the concept of prefabricated building, this paper deeply analyzes the key points of curtain wall construction technology and the specific application of curtain wall construction method of prefabricated building, which provides valuable reference experience for building a scientific and complete curtain wall construction technology system of prefabricated building, providing technical support for prefabricated building, and promoting the healthy and sustainable development of prefabricated building in China.展开更多
The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,door...The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,doors,windows,elevator shafts,and other locations.In this paper,we will investigate the areas with subpar soundproof performance in an assembled steel structure residential project and propose suitable noise control measures to address this issue.展开更多
Via layer-by-layer assembly, the polyoxometalates of Keggin type, SiW_ 11O_ 39Ni(H_2O) 6-(SiNiW_ 11) and {SiW_ 11O_ 39Mn(H_2O) 6-}(SiMnW_ 11) were first immobilized on a 4-aminothiophenol(4-ATP) modified glassy carbon...Via layer-by-layer assembly, the polyoxometalates of Keggin type, SiW_ 11O_ 39Ni(H_2O) 6-(SiNiW_ 11) and {SiW_ 11O_ 39Mn(H_2O) 6-}(SiMnW_ 11) were first immobilized on a 4-aminothiophenol(4-ATP) modified glassy carbon electrode surface. The electrochemical behavior of these polyoxometalates was investigated. They exhibited some special properties in the films, which are different from those in a homogeneous aqueous solution. Their reaction mechanism in a multilayer film is proposed. The electrocatalytic behavior of these multilayer film electrodes for the reduction of BrO-_3 and NO-_2 were comparatively studied.展开更多
The integration of multiscale and multicomponent of molecules and nanoparticles into thin films for applications requires the abilities of controlled their processing and assembly,which has been an great challenge bec...The integration of multiscale and multicomponent of molecules and nanoparticles into thin films for applications requires the abilities of controlled their processing and assembly,which has been an great challenge because of the difficulty in manipulating the various materials such as small molecules,complexes,polymers,and inorganic nanomaterials through synergetic combinations of chemical or physical fabrications.Eletropolymerization is of great significance to fabricate polymeric film materials straight on the conductive substrates with tunable morphologies and thicknesses.However,unlimited electrochemical reactions（polymerization）have been usually leading to disadvantageous in ill-defined structure and highly doped state.Thanks to finding of exceptional electrochemical reaction（oligomerization）of N-alkylcarbazole,electrochemical layer by layer assembly has emerged as a promising strategy for a wide library of applications.The capability of this strategy can manipulate various molecules and nanoparticles into the scale and component controllable thin films.Unlike other electropolymerizable precursors such as aniline and thiophene,the resulting di-N-alkylcarbazole is transparent in the visible light region and thus does not impair the intrinsic properties of the components in the film.This account highlights of the typical findings in investigating both single-and multi-components thin films as a forum for discussing new opportunities in exploiting novel designs and applications of optical thin films.展开更多
基金Supported by the National Basic Research Program of China(2015CB655301)the Natural Science Foundation of China(21825803)+2 种基金and the Natural Science Foundation of Jiangsu Province(BK20150063)the Program of Excellent Innovation Teams of Jiangsu Higher Education Institutionsthe Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly permeable gradient phenolic membranes with tight selectivity are used as substrates to prepare TFC membranes with high permeances by the layer-by-layer assembly method. The negatively charged phenolic substrates are alternately assembled with polycation polyethylenimine(PEI) and polyanion poly(acrylic acid)(PAA)as a result of electrostatic interactions, forming thin and compact PEI/PAA layers tightly attached to the substrate surface. Benefiting from the high permeances and tight surface pores of the gradient nanoporous structures of the substrates, the produced PEI/PAA membranes exhibit a permeance up to 506 L? m-2?h-1?MPa-1, which is ~2–10 times higher than that of other membranes with similar rejections. The PEI/PAA membranes are capable of retaining N 96.1% of negatively charged dyes following the mechanism of electrostatic repulsion. We demonstrate that the membranes can also separate positively and neutrally charged dyes from water via other mechanisms.This work opens a new avenue for the design and preparation of high-flux NF membranes, which is also applicable to enhance the permeance of other TFC membranes.
基金Project (Nos.20805043 and 30800247) supported by the National Natural Science Foundation of China
文摘A simple and controllable layer-by-layer （LBL） assembly method was proposed for the construction of reagentless biosensors based on electrostatic interaction between functional multiwall carbon nanotubes （MWNTs） and enzyme-mediator biocomposites. The carboxylated MWNTs were wrapped with polycations poly（allylamine hydrochloride） （PAH） and the resulting PAH-MWNTs were well dispersed and positively charged. As a water-soluble dye methylene blue （MB） could mix well with horseradish peroxidase （HRP） to form a biocompatible and negativelycharged HRP-MB biocomposite. A （PAH-MWNTs/HRP-MB）, bionanomultilayer was then prepared by electrostatic LBL assembly of PAH-MWNTs and HRP-MB on a polyelectrolyte precursor film-modified Au electrode. Due to the excellent biocompatibility of HRP-MB biocomposite and the uniform LBL assembly, the immobilized HRP could retain its natural bioactivity and MB could efficiently shuttle electrons between HRP and the electrode. The incorporation of MWNTs in the bionanomultilayer enhanced the surface coverage concentration of the electroactive enzyme and increased the catalytic current response of the electrode. The proposed biosensor displayed a fast response （2 s） to hydrogen peroxide with a low detection limit of 2.0× 10^-7 mol/L （S/N=3）. This work provided a versatile platform in the further development of reagentless biosensors.
基金supported by Rachadapisek Sompote Fund for Postdoctoral Fellowship, Chulalongkorn University, Thailandthe Nanotechnology Center (NANOTEC), NSTDA Ministry of Science and Technology, Thailand, through its program of Center of Excellence Network+1 种基金National Research University Project of CHEthe Rachadapisek Sompote Endowment Fund (No. AM1041A)
文摘Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic acid）（PSS） and poly（diallyl-dimethylammonium chloride）（PDADMAC） to improve the anchoring of the Ti O2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic Ti O2 nanoparticles to construct Ti O2/PDADMAC bilayer in the Lb L fashion. The number of deposited Ti O2/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust Ti O2 loading. The Lb L technique showed higher Ti O2 loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue（MB）. Results showed that the Ti O2 modified fibers exhibited excellent photocatalytic activity efficiency similar to that of Ti O2 powder dispersed in solution. The deposition of Ti O23 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr.Ti O2-Lb L constructions also preserved Ti O2 adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of Ti O2 particles from the substrate outer surface. However, even in the third cycle, the Ti O2 modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.
基金supported by the National Natural Science Foundation of China(Nos.20674001,20325415, 20834001)the Research Fund for Doctoral Program of Higher Education of MOE of China(No.20060001029)
文摘An eleetrochromic variable optical attenuator （ECVOA） was fabricated by layer-by-layer （LBL） assembly of disodium N,N-bis（p-sulfonatophenyl）naphthalenedicarboximide （Naph-SO3Na） and common cationic polymer poly（diallyldimethylammonium） chloride （PDDA）. The UV-Vis absorption spectra of the multilayer films revealed that approximately an equal amount of Naph-SO3Na was assembled in each deposition cycle. Upon one-electron reduction, multilayer films exhibited intense absorption around 452 nm and also a broad absorption band from 1200 nm to 1900 nm. Owing to the improved ionic conductivity, the optical attenuation at 1550 nm of the films showed rapid response time and reached 1.3 dB/μm within 5 s. These results indicate that layer-by-layer assembly could be an effective method for the preparation of ECVOA operating in near infrared region.
基金supported by the Natural Science Foundation of China(Nos.21173266 and 21473250)the Fundamental Research Funds for the Central Universitiesthe Research Funds of Renmin University of China(No.11XNJ021)
文摘The layer-by-layer assembly of graphene oxide and diazoresin is carried out via the electrostatic and hydrogen bond interactions on planar substrates and colloidal templates.The successful planar and spherical growth of multilayer could be investigated by UV-vis spectrophotometry and scanning electron microscopy,respectively.Subsequent UV irradiation or heating would convert the ionic bonds and hydrogen bonds to covalent bands,which significantly improves the stability of the multilayer composite against solvent etching.For the cross-linked core-shell composites,the template cores could be removed by dissolution and hollow microspheres are obtained.
基金supported by the Double First-Class Construction Funds of Sichuan University and National Natural Science Foundation of China(NNSFC)financial support from the National Science Foundation of China(51873126,51422305,51721091)。
文摘The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^(-2) delivers a stable area capacity of 6.6 mAh cm^(-2) over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^(-2) over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.
基金the Ministry of Higher Education High Impact Research (HIR F000032)the University of Malaya (RP022-2012A)for their generous financial support, and the Nanotechnology and Catalysis Research Centre (NANOCAT) for their analytical services
文摘Metal oxide semiconductor materials such as ZnO have tremendous potential as light absorbers for photocatalysed electrodes in the electrochemical reduction of water. Promoters such as rGO have been added to reduce the recombination losses of charge carriers and improve its photoelectrochemical activity. In this study, the effect of layer ordering on the charge transfer properties of rGO-hybridised ZnO sandwich thin films for the photo-catalysed electrochemical reduction of water was investigated. rGO-hybridised ZnO sandwich thin films were prepared via a facile electrode position technique using a layer-by-layer approach. The thin films were analysed using FESEM, XRD, Raman, PL, UV–vis, EIS and CV techniques to investigate its morphological, optical and electrochemical properties. The FESEM images show the formation of distinct layers of rGO and ZnO nanorods/flakes via the layer-by-layer method. XRD confirmed the wurtzite structure of ZnO. PL spectroscopy revealed a reduction of photoemission intensity in the visible region（580 nm） when rGO was incorporated into the ZnO thin film. Among the six thin films prepared, ZnO/rGO showed superior performance compared to the other thin films（0.964 m A/cm） due to the presence of graphene edges which participate as heterogenous electrocatalysts in the photocatalysed electrolysis of water. rGO also acts as electron acceptor, forming an n-p heterojunction which improves the activity of ZnO to oxidise water molecules to O2. EIS revealed that the application of rGO as back contact（rGO/ZnO, rGO/ZnO/rGO） reduces the charge transfer resistance of a semiconductor thin film. Alternatively, rGO as front contact（ZnO/rGO, rGO/ZnO/rGO） improves the photo-catalysed electrolysis of water through the participation of the rGO edges in the chemical activation of water. The findings from this study indicate that the layer ordering significantly affects the thin film＇s electrostatic properties and this understanding can be further advantageous for tunable applications.
基金Project(2014TDJH104)supported by Shandong University of Science and Technology(SDUST)Research FundChina+3 种基金Project(2013RCJJ006)supported by Scientific Research Foundation of Shandong University of Science and Technology for Recruited TalentsChinaProject(BS2013CL009)supported by Scientific Research Foundation of Shandong for Outstanding Young ScientistChina
文摘To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnesium alloy substrates by an in-situ hydrothermal method and well-defined multilayer coatings, consisting of gentamicin sulfate（GS） and poly（sodium 4-styrene sulfonate）（PSS）, were prepared via layer-by-layer（Lb L） assembly. The morphologies, chemical compositions and corrosion resistance of the obtained（PSS/GS）n/Mg sample were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, electrochemical methods and immersion tests. Finally, the bactericidal activity of（PSS/GS）n/Mg samples against Staphylococcus aureus was assessed by the zone of inhibition methods and plate-counting method. The so-synthesized composite coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance, which make them attractive as coatings for medical implanted devices.
文摘With the development of modern science and technology, the construction industry is gradually moving towards an innovative development path. The requirements of modern prefabricated building design are not only the requirements of safety and economy, but also the requirements of energy saving and innovation. BIM technology refers to building information model. By using BIM technology, designers can accurately find out the problems existing in prefabricated building design, quickly work out effective solutions, and reduce the incidence of various difficult problems in the construction process, thus improving the scientificity and rationality of prefabricated building design and comprehensively improving the quality of prefabricated building design schemes. Next, the article discusses the assembly building design method based on BIM technology.
文摘The mechanical connection of aircraft structural parts is mainly mechanical connection. The quality of mechanical connection has an important impact on the service life of the whole aircraft. The automatic drilling system of aircraft assembly is applied to the digital assembly of aircraft in aviation manufacturing engineering, which can greatly improve the assembly quality and efficiency. This paper studies and analyzes the advanced hole making technology and equipment in aircraft assembly for reference.
文摘"Environmental protection concept" is the latest project construction concept put forward by Chinas construction industry in the market development. Reasonable, standardized and scientific use of green technology in prefabricated building construction can not only bring into play the higher economic benefits of the building in the market, but also create a better social image for builders and construction units in the market. In order to implement this work, solve the extensive production problems existing in the early development of the construction industry in the market and reduce the problems of high energy consumption and heavy pollution caused by unreasonable construction technology.
基金Projects(51571134,51601108)supported by the National Natural Science Foundation of ChinaProject(2013RCJJ006)supported by the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents,China+1 种基金Project(2016ZRB01A62)supported by the Natural Science Foundation of Shandong Province,ChinaProject(2014TDJH104)supported by Shandong University of Science and Technology Research Fund,China
文摘Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg alloy surface by layer-by-layer(LbL)assembly of chitosan(CHI)and poly-L-glutamic acid(PGA)by electrostatic attraction.The functionalized surfaces of the Mg alloys were characterized by field-emission scanning electron microscopy(FE-SEM),Fourier transform infrared(FT-IR)spectroscopy and electrochemical tests.The bactericidal activity of the samples against Staphylococcus aureus was assessed by the zone of plate-counting method.The obtained coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance.
基金This work was supported by the National Natural Sci-ence Foundation of China(51571134)Shandong Provincial Natural Science Foundation(ZR2017BEM002)Shan-dong University of Science and Technology Research Fund(2014TDJH104).
文摘A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photoelectron spectrometry,Fourier transform infrared spectroscopy and field-emission scanning electron microscopy were utilized to represent the chemical compositions and surface morphologies of the coatings.Electrochemical tests and hydrogen evolution measurements were implemented to confirm the good corrosion resistance of the composite coating in artificial body fluid.Antimicrobial activity of the composite coatings was tested via the plate-counting method,and the cytotoxicity of the samples was appraised by MTT assay and Live/dead staining.A double action was put into effect for the composite coating,which the inner Mg(OH)2 coating plays the part of physical barrier,and the outer(CHI/DNA)5 coating is employed as an inducer to fabricate a biocompatible Ca-P corrosion product coating during immersion,making up for its thin thickness.Otherwise,the composite coating is also beneficial for the growth of bone,resulting from the biomineralization effect of the outer polyelectrolyte multilayer.The good antibacterial property of the(CHI/DNA)5/Mg(OH)2 coating is ascribed to the contact-killing strength of CHI.Thus,the obtained(CHI/DNA)5/Mg(OH)2 coating has a wide application prospect in the field of Mg-based bone implantation.
基金supported by the Italian Ministry of University(MIUR)call PRIN 2017 with the project“PANACEA:A technology Platform for the sustainable recovery and advanced use of NAnostructured CEllulose from Agro-food residues”(grant No.2017LEPH3M).
文摘The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In this context,keratin fibers,as a waste from the tannery industry,represent a great opportunity for the development of green functional materials.In this paper,keratin fibers were surface functionalized using the Layer-by-Layer(LbL)deposition technique and then freeze-dried in order to obtain a lightweight,fire-resistant,and sustainable material.The LbL coating,made with chitosan and carboxymethylated cellulose nanofibers,is fundamental in enabling the formation of a self-sustained structure after freeze-drying.The prepared porous fiber networks(density 100 kg m^(-3))display a keratin fiber content greater than 95 wt%and can easily self-extinguish the flame during a flammability test in a vertical configuration.In addition,during forced combustion tests(50 kW m^(-2))the samples exhibited a reduction of 37% in heat release rate and a reduction of 75%in smoke production if compared with a commercial polyurethane foam.The results obtained represent an excellent opportunity for the development of fire-safe sustainable materials based on fiber wastes.
基金supported by the Specialized Research Fund for the Doctoral Program of High Education(Nos. 20111102120050 and 20101102110035)National Basic Research Program of China (No. 2010CB934700)
文摘Inspired by the birch bark, which has multilayered structures, we fabricated layer-by-layer （LbL） assembled montmorillonite （MMT） and poly（p-aminostyrene） （PPAS） nanocomposites on cotton fiber curved surfaces to provide protection from atomic oxygen （AO） erosion. The multilayer coated fibers had high flexibility, uniformity, defect free, ease of preparation and low cost. The AO erosion durability has been dramatically enhanced which was evidenced by testing in the ground-based AO effects simulation facility. And the dimension and surface morphologies of the fibers observed by SEM had few changes, indicating excellent AO erosion resistant ability of the coatings. These results provide us a new method to design fibrous materials exposed directly in low earth orbit environment.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174229,11374236 and 11204221the National Basic Research Program of China under Grant No 2011CB922201
文摘We investigate the power-dependent luminescence of CdSe/ZnS semiconductor quantum dots closely packed layer- by-layer in the proximity of a silver nanorod array cavity. It is found that the emission peak shifts significantly to the longer wavelengths as the excitation power increases, especially when the longitudinal surface plasmon resonance of the Ag nanorod array cavity is adjusted to be close to the emission wavelength. The equivalent gain varies with the coating layer of CdSe/ZnS semiconductor quantum dots and the excitation power is also studied to explain this interesting spectrum-shifting effect. These findings could find applications in the dynamic information processing of active plasmonic and photonic nanodevices.
文摘China's continuous economic progress, the deepening process of urbanization, and the gradual improvement of people's living standards have brought more opportunities for the development of the construction industry. The number of construction projects is increasing, and the scale of projects is expanding. In order to meet the increasing demand of people for the number of buildings, the construction industry is developing and innovating, and the application of prefabricated building mode comes into being. Building curtain wall is an important part of prefabricated building. Glass curtain wall is widely used in practice. In order to improve the overall quality of prefabricated building engineering and the overall beauty of the building, we should attach great importance to the construction of prefabricated building curtain wall and adopt scientific curtain wall construction technology. Combined with the concept of prefabricated building, this paper deeply analyzes the key points of curtain wall construction technology and the specific application of curtain wall construction method of prefabricated building, which provides valuable reference experience for building a scientific and complete curtain wall construction technology system of prefabricated building, providing technical support for prefabricated building, and promoting the healthy and sustainable development of prefabricated building in China.
文摘The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,doors,windows,elevator shafts,and other locations.In this paper,we will investigate the areas with subpar soundproof performance in an assembled steel structure residential project and propose suitable noise control measures to address this issue.
文摘Via layer-by-layer assembly, the polyoxometalates of Keggin type, SiW_ 11O_ 39Ni(H_2O) 6-(SiNiW_ 11) and {SiW_ 11O_ 39Mn(H_2O) 6-}(SiMnW_ 11) were first immobilized on a 4-aminothiophenol(4-ATP) modified glassy carbon electrode surface. The electrochemical behavior of these polyoxometalates was investigated. They exhibited some special properties in the films, which are different from those in a homogeneous aqueous solution. Their reaction mechanism in a multilayer film is proposed. The electrocatalytic behavior of these multilayer film electrodes for the reduction of BrO-_3 and NO-_2 were comparatively studied.
基金supported by the National Natural Science Foundation of China (Nos. 21374115, 51573181, and 21504088)the Hundred Talents Program, CAS, China
文摘The integration of multiscale and multicomponent of molecules and nanoparticles into thin films for applications requires the abilities of controlled their processing and assembly,which has been an great challenge because of the difficulty in manipulating the various materials such as small molecules,complexes,polymers,and inorganic nanomaterials through synergetic combinations of chemical or physical fabrications.Eletropolymerization is of great significance to fabricate polymeric film materials straight on the conductive substrates with tunable morphologies and thicknesses.However,unlimited electrochemical reactions（polymerization）have been usually leading to disadvantageous in ill-defined structure and highly doped state.Thanks to finding of exceptional electrochemical reaction（oligomerization）of N-alkylcarbazole,electrochemical layer by layer assembly has emerged as a promising strategy for a wide library of applications.The capability of this strategy can manipulate various molecules and nanoparticles into the scale and component controllable thin films.Unlike other electropolymerizable precursors such as aniline and thiophene,the resulting di-N-alkylcarbazole is transparent in the visible light region and thus does not impair the intrinsic properties of the components in the film.This account highlights of the typical findings in investigating both single-and multi-components thin films as a forum for discussing new opportunities in exploiting novel designs and applications of optical thin films.
