To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnes...To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnesium alloy substrates by an in-situ hydrothermal method and well-defined multilayer coatings, consisting of gentamicin sulfate（GS） and poly（sodium 4-styrene sulfonate）（PSS）, were prepared via layer-by-layer（Lb L） assembly. The morphologies, chemical compositions and corrosion resistance of the obtained（PSS/GS）n/Mg sample were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, electrochemical methods and immersion tests. Finally, the bactericidal activity of（PSS/GS）n/Mg samples against Staphylococcus aureus was assessed by the zone of inhibition methods and plate-counting method. The so-synthesized composite coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance, which make them attractive as coatings for medical implanted devices.展开更多
Because of their low electrical conductivity,sluggish ion diffusion,and poor stability,conventional electrode materials are not able to meet the growing demands of energy storage and portable devices.Graphene assemble...Because of their low electrical conductivity,sluggish ion diffusion,and poor stability,conventional electrode materials are not able to meet the growing demands of energy storage and portable devices.Graphene assembled films(GAFs)formed from graphene nanosheets have an ultrahigh conductivity,a unique 2D network structure,and exceptional mechanical strength,which give them the potential to solve these problems.However,a systematic understanding of GAFs as an advanced electrode material is lacking.This review focuses on the use of GAFs in electrochemistry,providing a comprehensive analysis of their synthesis methods,surface/structural characteristics,and physical properties,and thus understand their structure-property relationships.Their advantages in batteries,supercapacitors,and electrochemical sensors are systematically evaluated,with an emphasis on their excellent electrical conductivity,ion transport kinetics,and interfacial stability.The existing problems in these devices,such as chemical inertness and mechanical brittleness,are discussed and potential solutions are proposed,including defect engineering and hybrid structures.This review should deepen our mechanistic understanding of the use of GAFs in electrochemical systems and provide actionable strategies for developing stable,high-performance electrode materials.展开更多
The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In...The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In this context,keratin fibers,as a waste from the tannery industry,represent a great opportunity for the development of green functional materials.In this paper,keratin fibers were surface functionalized using the Layer-by-Layer(LbL)deposition technique and then freeze-dried in order to obtain a lightweight,fire-resistant,and sustainable material.The LbL coating,made with chitosan and carboxymethylated cellulose nanofibers,is fundamental in enabling the formation of a self-sustained structure after freeze-drying.The prepared porous fiber networks(density 100 kg m^(-3))display a keratin fiber content greater than 95 wt%and can easily self-extinguish the flame during a flammability test in a vertical configuration.In addition,during forced combustion tests(50 kW m^(-2))the samples exhibited a reduction of 37% in heat release rate and a reduction of 75%in smoke production if compared with a commercial polyurethane foam.The results obtained represent an excellent opportunity for the development of fire-safe sustainable materials based on fiber wastes.展开更多
Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg ...Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg alloy surface by layer-by-layer(LbL)assembly of chitosan(CHI)and poly-L-glutamic acid(PGA)by electrostatic attraction.The functionalized surfaces of the Mg alloys were characterized by field-emission scanning electron microscopy(FE-SEM),Fourier transform infrared(FT-IR)spectroscopy and electrochemical tests.The bactericidal activity of the samples against Staphylococcus aureus was assessed by the zone of plate-counting method.The obtained coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance.展开更多
A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photo...A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photoelectron spectrometry,Fourier transform infrared spectroscopy and field-emission scanning electron microscopy were utilized to represent the chemical compositions and surface morphologies of the coatings.Electrochemical tests and hydrogen evolution measurements were implemented to confirm the good corrosion resistance of the composite coating in artificial body fluid.Antimicrobial activity of the composite coatings was tested via the plate-counting method,and the cytotoxicity of the samples was appraised by MTT assay and Live/dead staining.A double action was put into effect for the composite coating,which the inner Mg(OH)2 coating plays the part of physical barrier,and the outer(CHI/DNA)5 coating is employed as an inducer to fabricate a biocompatible Ca-P corrosion product coating during immersion,making up for its thin thickness.Otherwise,the composite coating is also beneficial for the growth of bone,resulting from the biomineralization effect of the outer polyelectrolyte multilayer.The good antibacterial property of the(CHI/DNA)5/Mg(OH)2 coating is ascribed to the contact-killing strength of CHI.Thus,the obtained(CHI/DNA)5/Mg(OH)2 coating has a wide application prospect in the field of Mg-based bone implantation.展开更多
Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic a...Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic acid）（PSS） and poly（diallyl-dimethylammonium chloride）（PDADMAC） to improve the anchoring of the Ti O2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic Ti O2 nanoparticles to construct Ti O2/PDADMAC bilayer in the Lb L fashion. The number of deposited Ti O2/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust Ti O2 loading. The Lb L technique showed higher Ti O2 loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue（MB）. Results showed that the Ti O2 modified fibers exhibited excellent photocatalytic activity efficiency similar to that of Ti O2 powder dispersed in solution. The deposition of Ti O23 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr.Ti O2-Lb L constructions also preserved Ti O2 adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of Ti O2 particles from the substrate outer surface. However, even in the third cycle, the Ti O2 modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.展开更多
Inspired by the birch bark, which has multilayered structures, we fabricated layer-by-layer （LbL） assembled montmorillonite （MMT） and poly（p-aminostyrene） （PPAS） nanocomposites on cotton fiber curved surfaces ...Inspired by the birch bark, which has multilayered structures, we fabricated layer-by-layer （LbL） assembled montmorillonite （MMT） and poly（p-aminostyrene） （PPAS） nanocomposites on cotton fiber curved surfaces to provide protection from atomic oxygen （AO） erosion. The multilayer coated fibers had high flexibility, uniformity, defect free, ease of preparation and low cost. The AO erosion durability has been dramatically enhanced which was evidenced by testing in the ground-based AO effects simulation facility. And the dimension and surface morphologies of the fibers observed by SEM had few changes, indicating excellent AO erosion resistant ability of the coatings. These results provide us a new method to design fibrous materials exposed directly in low earth orbit environment.展开更多
We investigate the power-dependent luminescence of CdSe/ZnS semiconductor quantum dots closely packed layer- by-layer in the proximity of a silver nanorod array cavity. It is found that the emission peak shifts signif...We investigate the power-dependent luminescence of CdSe/ZnS semiconductor quantum dots closely packed layer- by-layer in the proximity of a silver nanorod array cavity. It is found that the emission peak shifts significantly to the longer wavelengths as the excitation power increases, especially when the longitudinal surface plasmon resonance of the Ag nanorod array cavity is adjusted to be close to the emission wavelength. The equivalent gain varies with the coating layer of CdSe/ZnS semiconductor quantum dots and the excitation power is also studied to explain this interesting spectrum-shifting effect. These findings could find applications in the dynamic information processing of active plasmonic and photonic nanodevices.展开更多
Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly...Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly permeable gradient phenolic membranes with tight selectivity are used as substrates to prepare TFC membranes with high permeances by the layer-by-layer assembly method. The negatively charged phenolic substrates are alternately assembled with polycation polyethylenimine(PEI) and polyanion poly(acrylic acid)(PAA)as a result of electrostatic interactions, forming thin and compact PEI/PAA layers tightly attached to the substrate surface. Benefiting from the high permeances and tight surface pores of the gradient nanoporous structures of the substrates, the produced PEI/PAA membranes exhibit a permeance up to 506 L? m-2?h-1?MPa-1, which is ~2–10 times higher than that of other membranes with similar rejections. The PEI/PAA membranes are capable of retaining N 96.1% of negatively charged dyes following the mechanism of electrostatic repulsion. We demonstrate that the membranes can also separate positively and neutrally charged dyes from water via other mechanisms.This work opens a new avenue for the design and preparation of high-flux NF membranes, which is also applicable to enhance the permeance of other TFC membranes.展开更多
A simple and controllable layer-by-layer （LBL） assembly method was proposed for the construction of reagentless biosensors based on electrostatic interaction between functional multiwall carbon nanotubes （MWNTs） a...A simple and controllable layer-by-layer （LBL） assembly method was proposed for the construction of reagentless biosensors based on electrostatic interaction between functional multiwall carbon nanotubes （MWNTs） and enzyme-mediator biocomposites. The carboxylated MWNTs were wrapped with polycations poly（allylamine hydrochloride） （PAH） and the resulting PAH-MWNTs were well dispersed and positively charged. As a water-soluble dye methylene blue （MB） could mix well with horseradish peroxidase （HRP） to form a biocompatible and negativelycharged HRP-MB biocomposite. A （PAH-MWNTs/HRP-MB）, bionanomultilayer was then prepared by electrostatic LBL assembly of PAH-MWNTs and HRP-MB on a polyelectrolyte precursor film-modified Au electrode. Due to the excellent biocompatibility of HRP-MB biocomposite and the uniform LBL assembly, the immobilized HRP could retain its natural bioactivity and MB could efficiently shuttle electrons between HRP and the electrode. The incorporation of MWNTs in the bionanomultilayer enhanced the surface coverage concentration of the electroactive enzyme and increased the catalytic current response of the electrode. The proposed biosensor displayed a fast response （2 s） to hydrogen peroxide with a low detection limit of 2.0× 10^-7 mol/L （S/N=3）. This work provided a versatile platform in the further development of reagentless biosensors.展开更多
An eleetrochromic variable optical attenuator （ECVOA） was fabricated by layer-by-layer （LBL） assembly of disodium N,N-bis（p-sulfonatophenyl）naphthalenedicarboximide （Naph-SO3Na） and common cationic polymer pol...An eleetrochromic variable optical attenuator （ECVOA） was fabricated by layer-by-layer （LBL） assembly of disodium N,N-bis（p-sulfonatophenyl）naphthalenedicarboximide （Naph-SO3Na） and common cationic polymer poly（diallyldimethylammonium） chloride （PDDA）. The UV-Vis absorption spectra of the multilayer films revealed that approximately an equal amount of Naph-SO3Na was assembled in each deposition cycle. Upon one-electron reduction, multilayer films exhibited intense absorption around 452 nm and also a broad absorption band from 1200 nm to 1900 nm. Owing to the improved ionic conductivity, the optical attenuation at 1550 nm of the films showed rapid response time and reached 1.3 dB/μm within 5 s. These results indicate that layer-by-layer assembly could be an effective method for the preparation of ECVOA operating in near infrared region.展开更多
It was tried to prepare the microcapsules containing grape polyphenol with the spray drying method followed by the layer-by-layer method. As grape polyphenol was water soluble, the spray drying method was adopted to o...It was tried to prepare the microcapsules containing grape polyphenol with the spray drying method followed by the layer-by-layer method. As grape polyphenol was water soluble, the spray drying method was adopted to obtain the higher content. As the shell material of the first microcapsules prepared by the spray drying method, palmitic acid with the melting point of 60°C was adopted in order to prevent grape polyphenol from dissolution into water. As the shell material of the second microcapsules prepared by the layer-by-layer method, chitosan was used to coat the first microcapsules and to give the microcapsules alcohol resistance. In the experiment, the spray drying conditions such as the inlet temperature and the spraying pressure, the oil soluble surfactant species and the chitosan concentration were changed. The mean diameters of microcapsules could be controlled in the range from 5 μm to 35 μm by changing the spraying pressure and the inlet temperature. The yield of microcapsules and the microencapsulation efficiency over 50% could be obtained under the conditions of P = 1.0 kgf/cm2 and Tin = 100°C. Furthermore, the microencapsulation efficiency could be increased by adding the oil soluble surfactant with the larger HLB value. Coating with chitosan could considerably increase alcohol resistance.展开更多
The layer-by-layer assembly of graphene oxide and diazoresin is carried out via the electrostatic and hydrogen bond interactions on planar substrates and colloidal templates.The successful planar and spherical growth ...The layer-by-layer assembly of graphene oxide and diazoresin is carried out via the electrostatic and hydrogen bond interactions on planar substrates and colloidal templates.The successful planar and spherical growth of multilayer could be investigated by UV-vis spectrophotometry and scanning electron microscopy,respectively.Subsequent UV irradiation or heating would convert the ionic bonds and hydrogen bonds to covalent bands,which significantly improves the stability of the multilayer composite against solvent etching.For the cross-linked core-shell composites,the template cores could be removed by dissolution and hollow microspheres are obtained.展开更多
Metal oxide semiconductor materials such as ZnO have tremendous potential as light absorbers for photocatalysed electrodes in the electrochemical reduction of water. Promoters such as rGO have been added to reduce the...Metal oxide semiconductor materials such as ZnO have tremendous potential as light absorbers for photocatalysed electrodes in the electrochemical reduction of water. Promoters such as rGO have been added to reduce the recombination losses of charge carriers and improve its photoelectrochemical activity. In this study, the effect of layer ordering on the charge transfer properties of rGO-hybridised ZnO sandwich thin films for the photo-catalysed electrochemical reduction of water was investigated. rGO-hybridised ZnO sandwich thin films were prepared via a facile electrode position technique using a layer-by-layer approach. The thin films were analysed using FESEM, XRD, Raman, PL, UV–vis, EIS and CV techniques to investigate its morphological, optical and electrochemical properties. The FESEM images show the formation of distinct layers of rGO and ZnO nanorods/flakes via the layer-by-layer method. XRD confirmed the wurtzite structure of ZnO. PL spectroscopy revealed a reduction of photoemission intensity in the visible region（580 nm） when rGO was incorporated into the ZnO thin film. Among the six thin films prepared, ZnO/rGO showed superior performance compared to the other thin films（0.964 m A/cm） due to the presence of graphene edges which participate as heterogenous electrocatalysts in the photocatalysed electrolysis of water. rGO also acts as electron acceptor, forming an n-p heterojunction which improves the activity of ZnO to oxidise water molecules to O2. EIS revealed that the application of rGO as back contact（rGO/ZnO, rGO/ZnO/rGO） reduces the charge transfer resistance of a semiconductor thin film. Alternatively, rGO as front contact（ZnO/rGO, rGO/ZnO/rGO） improves the photo-catalysed electrolysis of water through the participation of the rGO edges in the chemical activation of water. The findings from this study indicate that the layer ordering significantly affects the thin film＇s electrostatic properties and this understanding can be further advantageous for tunable applications.展开更多
With the development of economic globalization,distributedmanufacturing is becomingmore andmore prevalent.Recently,integrated scheduling of distributed production and assembly has captured much concern.This research s...With the development of economic globalization,distributedmanufacturing is becomingmore andmore prevalent.Recently,integrated scheduling of distributed production and assembly has captured much concern.This research studies a distributed flexible job shop scheduling problem with assembly operations.Firstly,a mixed integer programming model is formulated to minimize the maximum completion time.Secondly,a Q-learning-assisted coevolutionary algorithmis presented to solve themodel:(1)Multiple populations are developed to seek required decisions simultaneously;(2)An encoding and decoding method based on problem features is applied to represent individuals;(3)A hybrid approach of heuristic rules and random methods is employed to acquire a high-quality population;(4)Three evolutionary strategies having crossover and mutation methods are adopted to enhance exploration capabilities;(5)Three neighborhood structures based on problem features are constructed,and a Q-learning-based iterative local search method is devised to improve exploitation abilities.The Q-learning approach is applied to intelligently select better neighborhood structures.Finally,a group of instances is constructed to perform comparison experiments.The effectiveness of the Q-learning approach is verified by comparing the developed algorithm with its variant without the Q-learning method.Three renowned meta-heuristic algorithms are used in comparison with the developed algorithm.The comparison results demonstrate that the designed method exhibits better performance in coping with the formulated problem.展开更多
Because of the randomness of many impact factors influencing the dynamic assembly relationship of complex machinery, the reliability analysis of dynamic assembly relationship needs to be accomplished considering the r...Because of the randomness of many impact factors influencing the dynamic assembly relationship of complex machinery, the reliability analysis of dynamic assembly relationship needs to be accomplished considering the randomness from a probabilistic perspective. To improve the accuracy and efficiency of dynamic assembly relationship reliability analysis, the mechanical dynamic assembly reliability（MDAR） theory and a distributed collaborative response surface method（DCRSM） are proposed. The mathematic model of DCRSM is established based on the quadratic response surface function, and verified by the assembly relationship reliability analysis of aeroengine high pressure turbine（HPT） blade-tip radial running clearance（BTRRC）. Through the comparison of the DCRSM, traditional response surface method（RSM） and Monte Carlo Method（MCM）, the results show that the DCRSM is not able to accomplish the computational task which is impossible for the other methods when the number of simulation is more than 100 000 times, but also the computational precision for the DCRSM is basically consistent with the MCM and improved by 0.40-4.63% to the RSM, furthermore, the computational efficiency of DCRSM is up to about 188 times of the MCM and 55 times of the RSM under 10000 times simulations. The DCRSM is demonstrated to be a feasible and effective approach for markedly improving the computational efficiency and accuracy of MDAR analysis. Thus, the proposed research provides the promising theory and method for the MDAR design and optimization, and opens a novel research direction of probabilistic analysis for developing the high-performance and high-reliability of aeroengine.展开更多
In order to prepare a novel hemostatic dressing for uncontrolled hemorrhage, a porous chitosan sponge was coated with self-assembled（thrombin/tannic acid）n films, which were based on hydrogen bonding interactions be...In order to prepare a novel hemostatic dressing for uncontrolled hemorrhage, a porous chitosan sponge was coated with self-assembled（thrombin/tannic acid）n films, which were based on hydrogen bonding interactions between thrombin and tannic acid at physiologic p H. According to the whole blood clotting test, the coated chitosan sponges showed a significantly high rate of blood clotting due to the addition of thrombin. On the other hand, the storable half-life of immobilized thrombin is extended to 66.9 days at room temperature, which is 8.5 times longer than unfixed thrombin. It is because of the immobilization effect of, not only the porous structure of chitosan sponge but also the interactions between thrombin and tannic acid. In addition, the tannic acid has similar antibacterial effect to chitosan. Therefore, it is an excellent combination of chitosan, thrombin and tannic acid. Besides, all of materials in this research have been approved by the United States Food and Drug Administration（FDA）. So the chitosan-based sponge is a promising candidate dressing for uncontrolled hemorrhage due to its storable, bio-safe and highly effective hemostatic properties.展开更多
This study presents a structural analysis algorithm called the finite particle method （FPM） for kinematically indeterminate bar assemblies. Different from the traditional analysis method, FPM is based on the combina...This study presents a structural analysis algorithm called the finite particle method （FPM） for kinematically indeterminate bar assemblies. Different from the traditional analysis method, FPM is based on the combination of the vector mechanics and numerical calculations. It models the analyzed domain composed of finite particles. Newton＇s second law is adopted to describe the motions of all particles. A convected material flame and explicit time integration for the solution procedure is also adopted in this method. By using the FPM, there is no need to solve any nonlinear equations, to calculate the stiffness matrix or equilibrium matrix, which is very helpful in the analysis of kinematically indeterminate structures. The basic formulations for the space bar are derived, following its solution procedures for bar assemblies. Three numerical examples are analyzed using the FPM. Results obtained from both the straight pretension cable and the suspension cable assembly show that the FPM can produce a more accurate analysis result. The motion simulation of the four-bar space assembly demonstrates the capability of this method in the analysis ofkinematically indeterminate structures.展开更多
Target assembly is a key consumable material for producing thin fi lm used in the electronic packaging and devices. The residual stresses induced during the process of soldering are detrimental to the performance of t...Target assembly is a key consumable material for producing thin fi lm used in the electronic packaging and devices. The residual stresses induced during the process of soldering are detrimental to the performance of target assembly. In this work, the intensity and distribution of the soldering residual stress of Co/In/Cu target assembly subjected to a 20 W/(m^2 K) cooling condition corresponding to the actual air cooling process were studied, based on fi nite element simulation and Taguchi method, to optimize the sputtering target assembly. Effects of different control factors, including solder material, thickness of solder layer, target and backing plate, on the soldering residual stress of target assembly are investigated. The maximum residual stress is calculated as 9.28 MPa in the target located at 0.16 mm from target–solder layer interface and at a distance of 0.78 mm from symmetry axis. The optimal design in target assembly has the combination of indium solder material, cobalt target at 12 mm thick, solder layer at 0.8 mm thick, copper backing plate at 15 mm thick. Moreover, solder material is the most important factor among control factors in the target assembly.展开更多
Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Labor...Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Laboratory of Chemical Resource Engineering in Beiiing University of Chemical Technology, the orinciole for the design of controlled intercalation processes in the light of tuture production processing requirements has been developed. Intercalation assembly methods and technologies have been invented to control the intercalation process for preparing layered intercalated materials with various structures and functions.展开更多
基金Project(2014TDJH104)supported by Shandong University of Science and Technology(SDUST)Research FundChina+3 种基金Project(2013RCJJ006)supported by Scientific Research Foundation of Shandong University of Science and Technology for Recruited TalentsChinaProject(BS2013CL009)supported by Scientific Research Foundation of Shandong for Outstanding Young ScientistChina
文摘To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnesium alloy substrates by an in-situ hydrothermal method and well-defined multilayer coatings, consisting of gentamicin sulfate（GS） and poly（sodium 4-styrene sulfonate）（PSS）, were prepared via layer-by-layer（Lb L） assembly. The morphologies, chemical compositions and corrosion resistance of the obtained（PSS/GS）n/Mg sample were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, electrochemical methods and immersion tests. Finally, the bactericidal activity of（PSS/GS）n/Mg samples against Staphylococcus aureus was assessed by the zone of inhibition methods and plate-counting method. The so-synthesized composite coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance, which make them attractive as coatings for medical implanted devices.
基金the National Natural Science Foundation of China(22279097)the Key R&D Program of Hubei Province(2023BAB103)the PhD Scientific Research and Innovation Foundation of The Education Department of Hainan Province Joint Project of Sanya Yazhou Bay Science and Technology City(HSPHDSRF-2024-03-022)。
文摘Because of their low electrical conductivity,sluggish ion diffusion,and poor stability,conventional electrode materials are not able to meet the growing demands of energy storage and portable devices.Graphene assembled films(GAFs)formed from graphene nanosheets have an ultrahigh conductivity,a unique 2D network structure,and exceptional mechanical strength,which give them the potential to solve these problems.However,a systematic understanding of GAFs as an advanced electrode material is lacking.This review focuses on the use of GAFs in electrochemistry,providing a comprehensive analysis of their synthesis methods,surface/structural characteristics,and physical properties,and thus understand their structure-property relationships.Their advantages in batteries,supercapacitors,and electrochemical sensors are systematically evaluated,with an emphasis on their excellent electrical conductivity,ion transport kinetics,and interfacial stability.The existing problems in these devices,such as chemical inertness and mechanical brittleness,are discussed and potential solutions are proposed,including defect engineering and hybrid structures.This review should deepen our mechanistic understanding of the use of GAFs in electrochemical systems and provide actionable strategies for developing stable,high-performance electrode materials.
基金supported by the Italian Ministry of University(MIUR)call PRIN 2017 with the project“PANACEA:A technology Platform for the sustainable recovery and advanced use of NAnostructured CEllulose from Agro-food residues”(grant No.2017LEPH3M).
文摘The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In this context,keratin fibers,as a waste from the tannery industry,represent a great opportunity for the development of green functional materials.In this paper,keratin fibers were surface functionalized using the Layer-by-Layer(LbL)deposition technique and then freeze-dried in order to obtain a lightweight,fire-resistant,and sustainable material.The LbL coating,made with chitosan and carboxymethylated cellulose nanofibers,is fundamental in enabling the formation of a self-sustained structure after freeze-drying.The prepared porous fiber networks(density 100 kg m^(-3))display a keratin fiber content greater than 95 wt%and can easily self-extinguish the flame during a flammability test in a vertical configuration.In addition,during forced combustion tests(50 kW m^(-2))the samples exhibited a reduction of 37% in heat release rate and a reduction of 75%in smoke production if compared with a commercial polyurethane foam.The results obtained represent an excellent opportunity for the development of fire-safe sustainable materials based on fiber wastes.
基金Projects(51571134,51601108)supported by the National Natural Science Foundation of ChinaProject(2013RCJJ006)supported by the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents,China+1 种基金Project(2016ZRB01A62)supported by the Natural Science Foundation of Shandong Province,ChinaProject(2014TDJH104)supported by Shandong University of Science and Technology Research Fund,China
文摘Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg alloy surface by layer-by-layer(LbL)assembly of chitosan(CHI)and poly-L-glutamic acid(PGA)by electrostatic attraction.The functionalized surfaces of the Mg alloys were characterized by field-emission scanning electron microscopy(FE-SEM),Fourier transform infrared(FT-IR)spectroscopy and electrochemical tests.The bactericidal activity of the samples against Staphylococcus aureus was assessed by the zone of plate-counting method.The obtained coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance.
基金This work was supported by the National Natural Sci-ence Foundation of China(51571134)Shandong Provincial Natural Science Foundation(ZR2017BEM002)Shan-dong University of Science and Technology Research Fund(2014TDJH104).
文摘A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photoelectron spectrometry,Fourier transform infrared spectroscopy and field-emission scanning electron microscopy were utilized to represent the chemical compositions and surface morphologies of the coatings.Electrochemical tests and hydrogen evolution measurements were implemented to confirm the good corrosion resistance of the composite coating in artificial body fluid.Antimicrobial activity of the composite coatings was tested via the plate-counting method,and the cytotoxicity of the samples was appraised by MTT assay and Live/dead staining.A double action was put into effect for the composite coating,which the inner Mg(OH)2 coating plays the part of physical barrier,and the outer(CHI/DNA)5 coating is employed as an inducer to fabricate a biocompatible Ca-P corrosion product coating during immersion,making up for its thin thickness.Otherwise,the composite coating is also beneficial for the growth of bone,resulting from the biomineralization effect of the outer polyelectrolyte multilayer.The good antibacterial property of the(CHI/DNA)5/Mg(OH)2 coating is ascribed to the contact-killing strength of CHI.Thus,the obtained(CHI/DNA)5/Mg(OH)2 coating has a wide application prospect in the field of Mg-based bone implantation.
基金supported by Rachadapisek Sompote Fund for Postdoctoral Fellowship, Chulalongkorn University, Thailandthe Nanotechnology Center (NANOTEC), NSTDA Ministry of Science and Technology, Thailand, through its program of Center of Excellence Network+1 种基金National Research University Project of CHEthe Rachadapisek Sompote Endowment Fund (No. AM1041A)
文摘Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic acid）（PSS） and poly（diallyl-dimethylammonium chloride）（PDADMAC） to improve the anchoring of the Ti O2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic Ti O2 nanoparticles to construct Ti O2/PDADMAC bilayer in the Lb L fashion. The number of deposited Ti O2/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust Ti O2 loading. The Lb L technique showed higher Ti O2 loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue（MB）. Results showed that the Ti O2 modified fibers exhibited excellent photocatalytic activity efficiency similar to that of Ti O2 powder dispersed in solution. The deposition of Ti O23 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr.Ti O2-Lb L constructions also preserved Ti O2 adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of Ti O2 particles from the substrate outer surface. However, even in the third cycle, the Ti O2 modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.
基金supported by the Specialized Research Fund for the Doctoral Program of High Education(Nos. 20111102120050 and 20101102110035)National Basic Research Program of China (No. 2010CB934700)
文摘Inspired by the birch bark, which has multilayered structures, we fabricated layer-by-layer （LbL） assembled montmorillonite （MMT） and poly（p-aminostyrene） （PPAS） nanocomposites on cotton fiber curved surfaces to provide protection from atomic oxygen （AO） erosion. The multilayer coated fibers had high flexibility, uniformity, defect free, ease of preparation and low cost. The AO erosion durability has been dramatically enhanced which was evidenced by testing in the ground-based AO effects simulation facility. And the dimension and surface morphologies of the fibers observed by SEM had few changes, indicating excellent AO erosion resistant ability of the coatings. These results provide us a new method to design fibrous materials exposed directly in low earth orbit environment.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174229,11374236 and 11204221the National Basic Research Program of China under Grant No 2011CB922201
文摘We investigate the power-dependent luminescence of CdSe/ZnS semiconductor quantum dots closely packed layer- by-layer in the proximity of a silver nanorod array cavity. It is found that the emission peak shifts significantly to the longer wavelengths as the excitation power increases, especially when the longitudinal surface plasmon resonance of the Ag nanorod array cavity is adjusted to be close to the emission wavelength. The equivalent gain varies with the coating layer of CdSe/ZnS semiconductor quantum dots and the excitation power is also studied to explain this interesting spectrum-shifting effect. These findings could find applications in the dynamic information processing of active plasmonic and photonic nanodevices.
基金Supported by the National Basic Research Program of China(2015CB655301)the Natural Science Foundation of China(21825803)+2 种基金and the Natural Science Foundation of Jiangsu Province(BK20150063)the Program of Excellent Innovation Teams of Jiangsu Higher Education Institutionsthe Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly permeable gradient phenolic membranes with tight selectivity are used as substrates to prepare TFC membranes with high permeances by the layer-by-layer assembly method. The negatively charged phenolic substrates are alternately assembled with polycation polyethylenimine(PEI) and polyanion poly(acrylic acid)(PAA)as a result of electrostatic interactions, forming thin and compact PEI/PAA layers tightly attached to the substrate surface. Benefiting from the high permeances and tight surface pores of the gradient nanoporous structures of the substrates, the produced PEI/PAA membranes exhibit a permeance up to 506 L? m-2?h-1?MPa-1, which is ~2–10 times higher than that of other membranes with similar rejections. The PEI/PAA membranes are capable of retaining N 96.1% of negatively charged dyes following the mechanism of electrostatic repulsion. We demonstrate that the membranes can also separate positively and neutrally charged dyes from water via other mechanisms.This work opens a new avenue for the design and preparation of high-flux NF membranes, which is also applicable to enhance the permeance of other TFC membranes.
基金Project (Nos.20805043 and 30800247) supported by the National Natural Science Foundation of China
文摘A simple and controllable layer-by-layer （LBL） assembly method was proposed for the construction of reagentless biosensors based on electrostatic interaction between functional multiwall carbon nanotubes （MWNTs） and enzyme-mediator biocomposites. The carboxylated MWNTs were wrapped with polycations poly（allylamine hydrochloride） （PAH） and the resulting PAH-MWNTs were well dispersed and positively charged. As a water-soluble dye methylene blue （MB） could mix well with horseradish peroxidase （HRP） to form a biocompatible and negativelycharged HRP-MB biocomposite. A （PAH-MWNTs/HRP-MB）, bionanomultilayer was then prepared by electrostatic LBL assembly of PAH-MWNTs and HRP-MB on a polyelectrolyte precursor film-modified Au electrode. Due to the excellent biocompatibility of HRP-MB biocomposite and the uniform LBL assembly, the immobilized HRP could retain its natural bioactivity and MB could efficiently shuttle electrons between HRP and the electrode. The incorporation of MWNTs in the bionanomultilayer enhanced the surface coverage concentration of the electroactive enzyme and increased the catalytic current response of the electrode. The proposed biosensor displayed a fast response （2 s） to hydrogen peroxide with a low detection limit of 2.0× 10^-7 mol/L （S/N=3）. This work provided a versatile platform in the further development of reagentless biosensors.
基金supported by the National Natural Science Foundation of China(Nos.20674001,20325415, 20834001)the Research Fund for Doctoral Program of Higher Education of MOE of China(No.20060001029)
文摘An eleetrochromic variable optical attenuator （ECVOA） was fabricated by layer-by-layer （LBL） assembly of disodium N,N-bis（p-sulfonatophenyl）naphthalenedicarboximide （Naph-SO3Na） and common cationic polymer poly（diallyldimethylammonium） chloride （PDDA）. The UV-Vis absorption spectra of the multilayer films revealed that approximately an equal amount of Naph-SO3Na was assembled in each deposition cycle. Upon one-electron reduction, multilayer films exhibited intense absorption around 452 nm and also a broad absorption band from 1200 nm to 1900 nm. Owing to the improved ionic conductivity, the optical attenuation at 1550 nm of the films showed rapid response time and reached 1.3 dB/μm within 5 s. These results indicate that layer-by-layer assembly could be an effective method for the preparation of ECVOA operating in near infrared region.
文摘It was tried to prepare the microcapsules containing grape polyphenol with the spray drying method followed by the layer-by-layer method. As grape polyphenol was water soluble, the spray drying method was adopted to obtain the higher content. As the shell material of the first microcapsules prepared by the spray drying method, palmitic acid with the melting point of 60°C was adopted in order to prevent grape polyphenol from dissolution into water. As the shell material of the second microcapsules prepared by the layer-by-layer method, chitosan was used to coat the first microcapsules and to give the microcapsules alcohol resistance. In the experiment, the spray drying conditions such as the inlet temperature and the spraying pressure, the oil soluble surfactant species and the chitosan concentration were changed. The mean diameters of microcapsules could be controlled in the range from 5 μm to 35 μm by changing the spraying pressure and the inlet temperature. The yield of microcapsules and the microencapsulation efficiency over 50% could be obtained under the conditions of P = 1.0 kgf/cm2 and Tin = 100°C. Furthermore, the microencapsulation efficiency could be increased by adding the oil soluble surfactant with the larger HLB value. Coating with chitosan could considerably increase alcohol resistance.
基金supported by the Natural Science Foundation of China(Nos.21173266 and 21473250)the Fundamental Research Funds for the Central Universitiesthe Research Funds of Renmin University of China(No.11XNJ021)
文摘The layer-by-layer assembly of graphene oxide and diazoresin is carried out via the electrostatic and hydrogen bond interactions on planar substrates and colloidal templates.The successful planar and spherical growth of multilayer could be investigated by UV-vis spectrophotometry and scanning electron microscopy,respectively.Subsequent UV irradiation or heating would convert the ionic bonds and hydrogen bonds to covalent bands,which significantly improves the stability of the multilayer composite against solvent etching.For the cross-linked core-shell composites,the template cores could be removed by dissolution and hollow microspheres are obtained.
基金the Ministry of Higher Education High Impact Research (HIR F000032)the University of Malaya (RP022-2012A)for their generous financial support, and the Nanotechnology and Catalysis Research Centre (NANOCAT) for their analytical services
文摘Metal oxide semiconductor materials such as ZnO have tremendous potential as light absorbers for photocatalysed electrodes in the electrochemical reduction of water. Promoters such as rGO have been added to reduce the recombination losses of charge carriers and improve its photoelectrochemical activity. In this study, the effect of layer ordering on the charge transfer properties of rGO-hybridised ZnO sandwich thin films for the photo-catalysed electrochemical reduction of water was investigated. rGO-hybridised ZnO sandwich thin films were prepared via a facile electrode position technique using a layer-by-layer approach. The thin films were analysed using FESEM, XRD, Raman, PL, UV–vis, EIS and CV techniques to investigate its morphological, optical and electrochemical properties. The FESEM images show the formation of distinct layers of rGO and ZnO nanorods/flakes via the layer-by-layer method. XRD confirmed the wurtzite structure of ZnO. PL spectroscopy revealed a reduction of photoemission intensity in the visible region（580 nm） when rGO was incorporated into the ZnO thin film. Among the six thin films prepared, ZnO/rGO showed superior performance compared to the other thin films（0.964 m A/cm） due to the presence of graphene edges which participate as heterogenous electrocatalysts in the photocatalysed electrolysis of water. rGO also acts as electron acceptor, forming an n-p heterojunction which improves the activity of ZnO to oxidise water molecules to O2. EIS revealed that the application of rGO as back contact（rGO/ZnO, rGO/ZnO/rGO） reduces the charge transfer resistance of a semiconductor thin film. Alternatively, rGO as front contact（ZnO/rGO, rGO/ZnO/rGO） improves the photo-catalysed electrolysis of water through the participation of the rGO edges in the chemical activation of water. The findings from this study indicate that the layer ordering significantly affects the thin film＇s electrostatic properties and this understanding can be further advantageous for tunable applications.
文摘With the development of economic globalization,distributedmanufacturing is becomingmore andmore prevalent.Recently,integrated scheduling of distributed production and assembly has captured much concern.This research studies a distributed flexible job shop scheduling problem with assembly operations.Firstly,a mixed integer programming model is formulated to minimize the maximum completion time.Secondly,a Q-learning-assisted coevolutionary algorithmis presented to solve themodel:(1)Multiple populations are developed to seek required decisions simultaneously;(2)An encoding and decoding method based on problem features is applied to represent individuals;(3)A hybrid approach of heuristic rules and random methods is employed to acquire a high-quality population;(4)Three evolutionary strategies having crossover and mutation methods are adopted to enhance exploration capabilities;(5)Three neighborhood structures based on problem features are constructed,and a Q-learning-based iterative local search method is devised to improve exploitation abilities.The Q-learning approach is applied to intelligently select better neighborhood structures.Finally,a group of instances is constructed to perform comparison experiments.The effectiveness of the Q-learning approach is verified by comparing the developed algorithm with its variant without the Q-learning method.Three renowned meta-heuristic algorithms are used in comparison with the developed algorithm.The comparison results demonstrate that the designed method exhibits better performance in coping with the formulated problem.
基金supported by National Natural Science Foundation of China(Grant Nos.51175017,51245027)Innovation Foundation of Beihang University for PhD Graduates,China(Grant No.YWF-12-RBYJ008)Research Fund for the Doctoral Program of Higher Education of China(Grant No.20111102110011)
文摘Because of the randomness of many impact factors influencing the dynamic assembly relationship of complex machinery, the reliability analysis of dynamic assembly relationship needs to be accomplished considering the randomness from a probabilistic perspective. To improve the accuracy and efficiency of dynamic assembly relationship reliability analysis, the mechanical dynamic assembly reliability（MDAR） theory and a distributed collaborative response surface method（DCRSM） are proposed. The mathematic model of DCRSM is established based on the quadratic response surface function, and verified by the assembly relationship reliability analysis of aeroengine high pressure turbine（HPT） blade-tip radial running clearance（BTRRC）. Through the comparison of the DCRSM, traditional response surface method（RSM） and Monte Carlo Method（MCM）, the results show that the DCRSM is not able to accomplish the computational task which is impossible for the other methods when the number of simulation is more than 100 000 times, but also the computational precision for the DCRSM is basically consistent with the MCM and improved by 0.40-4.63% to the RSM, furthermore, the computational efficiency of DCRSM is up to about 188 times of the MCM and 55 times of the RSM under 10000 times simulations. The DCRSM is demonstrated to be a feasible and effective approach for markedly improving the computational efficiency and accuracy of MDAR analysis. Thus, the proposed research provides the promising theory and method for the MDAR design and optimization, and opens a novel research direction of probabilistic analysis for developing the high-performance and high-reliability of aeroengine.
基金financially supported by the National Natural Science Foundation of China(Nos.21104067,21274127 and 21374099 and 51473144)Key Basic Research Development Plan(973 Program)of China(Nos.2009CB930104 and 2011CB606203)+1 种基金Fundamental Research Funds for the Central Universities(No.2013QNA4048)Technology Foundation for Selected Overseas Scholar of Zhejiang Province
文摘In order to prepare a novel hemostatic dressing for uncontrolled hemorrhage, a porous chitosan sponge was coated with self-assembled（thrombin/tannic acid）n films, which were based on hydrogen bonding interactions between thrombin and tannic acid at physiologic p H. According to the whole blood clotting test, the coated chitosan sponges showed a significantly high rate of blood clotting due to the addition of thrombin. On the other hand, the storable half-life of immobilized thrombin is extended to 66.9 days at room temperature, which is 8.5 times longer than unfixed thrombin. It is because of the immobilization effect of, not only the porous structure of chitosan sponge but also the interactions between thrombin and tannic acid. In addition, the tannic acid has similar antibacterial effect to chitosan. Therefore, it is an excellent combination of chitosan, thrombin and tannic acid. Besides, all of materials in this research have been approved by the United States Food and Drug Administration（FDA）. So the chitosan-based sponge is a promising candidate dressing for uncontrolled hemorrhage due to its storable, bio-safe and highly effective hemostatic properties.
基金supported by the National Natural Science Foundation of China (No. 50638050)the National High-Tech R&D (863) Program (No. 2007AA04Z441), China
文摘This study presents a structural analysis algorithm called the finite particle method （FPM） for kinematically indeterminate bar assemblies. Different from the traditional analysis method, FPM is based on the combination of the vector mechanics and numerical calculations. It models the analyzed domain composed of finite particles. Newton＇s second law is adopted to describe the motions of all particles. A convected material flame and explicit time integration for the solution procedure is also adopted in this method. By using the FPM, there is no need to solve any nonlinear equations, to calculate the stiffness matrix or equilibrium matrix, which is very helpful in the analysis of kinematically indeterminate structures. The basic formulations for the space bar are derived, following its solution procedures for bar assemblies. Three numerical examples are analyzed using the FPM. Results obtained from both the straight pretension cable and the suspension cable assembly show that the FPM can produce a more accurate analysis result. The motion simulation of the four-bar space assembly demonstrates the capability of this method in the analysis ofkinematically indeterminate structures.
基金supported financially by the National Key R&D Program of China (No. 2017YFB0305501)the National Natural Science Foundation of China (No. 51475220)the China Postdoctoral Science Foundation Funded Project (No. 2016M591464)
文摘Target assembly is a key consumable material for producing thin fi lm used in the electronic packaging and devices. The residual stresses induced during the process of soldering are detrimental to the performance of target assembly. In this work, the intensity and distribution of the soldering residual stress of Co/In/Cu target assembly subjected to a 20 W/(m^2 K) cooling condition corresponding to the actual air cooling process were studied, based on fi nite element simulation and Taguchi method, to optimize the sputtering target assembly. Effects of different control factors, including solder material, thickness of solder layer, target and backing plate, on the soldering residual stress of target assembly are investigated. The maximum residual stress is calculated as 9.28 MPa in the target located at 0.16 mm from target–solder layer interface and at a distance of 0.78 mm from symmetry axis. The optimal design in target assembly has the combination of indium solder material, cobalt target at 12 mm thick, solder layer at 0.8 mm thick, copper backing plate at 15 mm thick. Moreover, solder material is the most important factor among control factors in the target assembly.
基金Supported by the National Key Technologies R＆D Program （2011BAE28B01） and the National Natural Science Foundation of China （21276016）.
文摘Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Laboratory of Chemical Resource Engineering in Beiiing University of Chemical Technology, the orinciole for the design of controlled intercalation processes in the light of tuture production processing requirements has been developed. Intercalation assembly methods and technologies have been invented to control the intercalation process for preparing layered intercalated materials with various structures and functions.
