The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In...The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In this context,keratin fibers,as a waste from the tannery industry,represent a great opportunity for the development of green functional materials.In this paper,keratin fibers were surface functionalized using the Layer-by-Layer(LbL)deposition technique and then freeze-dried in order to obtain a lightweight,fire-resistant,and sustainable material.The LbL coating,made with chitosan and carboxymethylated cellulose nanofibers,is fundamental in enabling the formation of a self-sustained structure after freeze-drying.The prepared porous fiber networks(density 100 kg m^(-3))display a keratin fiber content greater than 95 wt%and can easily self-extinguish the flame during a flammability test in a vertical configuration.In addition,during forced combustion tests(50 kW m^(-2))the samples exhibited a reduction of 37% in heat release rate and a reduction of 75%in smoke production if compared with a commercial polyurethane foam.The results obtained represent an excellent opportunity for the development of fire-safe sustainable materials based on fiber wastes.展开更多
Based on reanalysis data and CMIP6 simulations,this study investigates the distinct responses of the cross-equatorial flows(CEFs)over the Maritime Continent(MC)under the simultaneous summer condition of two types of E...Based on reanalysis data and CMIP6 simulations,this study investigates the distinct responses of the cross-equatorial flows(CEFs)over the Maritime Continent(MC)under the simultaneous summer condition of two types of ENSO:central Pacific(CP)and eastern Pacific(EP).Results indicate that CP ENSO tends to exert stronger impacts on CEF.In CP ENSO years,significant lower-level southerly anomalies can be observed across all CEF branches adjacent to MC,accompanied by broader and deeper upper-level northerly anomalies,indicating a well-organized strengthening of both upper-and lowerlevel CEFs.In contrast,CEF anomalies in EP ENSO years tend to be weaker,with significant meridional wind anomalies confined to the east of MC.The disparities in the CEF responses can be elucidated from the perspective of convection over MC,a crucial factor in triggering CEF.In CP ENSO years,westward-leaning sea surface temperature(SST)anomalies result in a distinct cooling in MC and suppressed convection above,driving pronounced CEF anomalies.Conversely,the absence of such organized SST cooling during EP ENSO results in weaker convective forcing and subdued CEF responses.Furthermore,historical simulations from 48 CMIP6 models are utilized to validate the observational findings.Results show that model simulations can successfully reproduce the stronger impacts of CP ENSO,with a remarkable intermodel consistency.This research contributes toward a comprehensive understanding of the diversity in the relationship between CEF and ENSO types,and has implications for seasonal forecasting of CEF variability.展开更多
Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of mineral...Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of minerals,with reserves of at least 38 of over 80 widely used minerals worldwide accounting for more than30%of the global total reserves.Asia continent experienced three main tectonic evolution and mineralization stages:The Precambrian,the Paleozoic,and the Mesozoic to Cenozoic.The abundant mineral resources in this continent can be divided into seven first-order metallogenic belts(metallogenic domains),18 second-order metallogenic belts(metallogenic provinces),61 third-order metallogenic belts(metallogenic zones),and nine main minerogenetic series.Asia continent exhibits the most significant metallogenic specialization among all continents.Specifically,granite belts of Asia continent manifest pronounced metallogenic specialization of tin,rare metals,and porphyry Cu-Au-Mo deposits.Its maficultramafic rock belts and ophiolite belts display notable metallogenic specialization of lateritic nickel deposits and magmatic type chromite deposits,while its Mesozoic to Cenozoic basalt belts show remarkable metallogenic specialization of lateritic bauxite deposits.Consequently,many giant metallogenic belts were formed,including the Southeast Asian tin belt,the Qinghai-Xizang Plateau rare metal metallogenic belt,the Tethyan porphyry Cu-Au-Mo metallogenic belt,the circum-Pacific porphyry Cu-Au-Mo metallogenic belt,the Southeast Asian lateritic bauxite metallogenic belt,the Deccan Plateau lateritic bauxite metallogenic belt in India,the Southeast Asian lateritic nickel metallogenic belt,and the Tethyan magmatic type chromite metallogenic belt—all of which are significant metallogenic belts in Asia continent.Future mineral exploration in Asia should focus primarily on the Precambrian mineralization of ancient cratons,the Paleozoic mineralization of the Central Asian-Mongolian orogenic belt,and the Mesozoic to Cenozoic mineralization of the Tethyan and circum-Pacific mobile belts.Asia's mining industry not only underpins its own economic growth but also propels global economic development and industrialization,contributing significantly to the world economy.Asia boasts the highest production value of minerals,the largest annual production of minerals,and the greatest trade value of mineral products among all the continents,having emerged as the trade center of global mineral products and the center of the mining industry economy.China is identified as one of the few countries that possess the most comprehensive kinds of minerals,and its mining industry has supported and driven the economic development and industrialization of Asia and even the world.Standing as the largest mineral producer worldwide,China ranked first in the production of 28 mineral commodities in the world in 2022.Besides,China exhibits the highest annual production value of minerals and the largest trade value of mineral products among all countries.Therefore,China's demand for global mineral products influences the global supply and demand patterns of minerals and the world economic situation.展开更多
To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnes...To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnesium alloy substrates by an in-situ hydrothermal method and well-defined multilayer coatings, consisting of gentamicin sulfate（GS） and poly（sodium 4-styrene sulfonate）（PSS）, were prepared via layer-by-layer（Lb L） assembly. The morphologies, chemical compositions and corrosion resistance of the obtained（PSS/GS）n/Mg sample were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, electrochemical methods and immersion tests. Finally, the bactericidal activity of（PSS/GS）n/Mg samples against Staphylococcus aureus was assessed by the zone of inhibition methods and plate-counting method. The so-synthesized composite coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance, which make them attractive as coatings for medical implanted devices.展开更多
The key technology of semi-continuous conveyor system decides the successful using of this system. The key technology includes optimal initial building depth of this system,the crusher moving step and the layout of co...The key technology of semi-continuous conveyor system decides the successful using of this system. The key technology includes optimal initial building depth of this system,the crusher moving step and the layout of conveyor system are studied, and their calculating models are built up.展开更多
Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg ...Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg alloy surface by layer-by-layer(LbL)assembly of chitosan(CHI)and poly-L-glutamic acid(PGA)by electrostatic attraction.The functionalized surfaces of the Mg alloys were characterized by field-emission scanning electron microscopy(FE-SEM),Fourier transform infrared(FT-IR)spectroscopy and electrochemical tests.The bactericidal activity of the samples against Staphylococcus aureus was assessed by the zone of plate-counting method.The obtained coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance.展开更多
A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photo...A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photoelectron spectrometry,Fourier transform infrared spectroscopy and field-emission scanning electron microscopy were utilized to represent the chemical compositions and surface morphologies of the coatings.Electrochemical tests and hydrogen evolution measurements were implemented to confirm the good corrosion resistance of the composite coating in artificial body fluid.Antimicrobial activity of the composite coatings was tested via the plate-counting method,and the cytotoxicity of the samples was appraised by MTT assay and Live/dead staining.A double action was put into effect for the composite coating,which the inner Mg(OH)2 coating plays the part of physical barrier,and the outer(CHI/DNA)5 coating is employed as an inducer to fabricate a biocompatible Ca-P corrosion product coating during immersion,making up for its thin thickness.Otherwise,the composite coating is also beneficial for the growth of bone,resulting from the biomineralization effect of the outer polyelectrolyte multilayer.The good antibacterial property of the(CHI/DNA)5/Mg(OH)2 coating is ascribed to the contact-killing strength of CHI.Thus,the obtained(CHI/DNA)5/Mg(OH)2 coating has a wide application prospect in the field of Mg-based bone implantation.展开更多
Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly...Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly permeable gradient phenolic membranes with tight selectivity are used as substrates to prepare TFC membranes with high permeances by the layer-by-layer assembly method. The negatively charged phenolic substrates are alternately assembled with polycation polyethylenimine(PEI) and polyanion poly(acrylic acid)(PAA)as a result of electrostatic interactions, forming thin and compact PEI/PAA layers tightly attached to the substrate surface. Benefiting from the high permeances and tight surface pores of the gradient nanoporous structures of the substrates, the produced PEI/PAA membranes exhibit a permeance up to 506 L? m-2?h-1?MPa-1, which is ~2–10 times higher than that of other membranes with similar rejections. The PEI/PAA membranes are capable of retaining N 96.1% of negatively charged dyes following the mechanism of electrostatic repulsion. We demonstrate that the membranes can also separate positively and neutrally charged dyes from water via other mechanisms.This work opens a new avenue for the design and preparation of high-flux NF membranes, which is also applicable to enhance the permeance of other TFC membranes.展开更多
Layer-by-layer(LbL)assembly technology is a facile method for constructing thin film composite membrane.Herein,a novel nanofiltration(NF)membrane was prepared by LbL assembly of polyethyleneimine(PEI)and sodium lignos...Layer-by-layer(LbL)assembly technology is a facile method for constructing thin film composite membrane.Herein,a novel nanofiltration(NF)membrane was prepared by LbL assembly of polyethyleneimine(PEI)and sodium lignosulfonate(LS)followed by cross-linking.The surface composition,morphology,and property of PEI/LS bilayer were detailedly investigated by FTIR/ATR,XPS,SEM,AFM,and water contact angle test.The PEI/LS bilayer full of amino and hydroxyl groups presents increased roughness and improved hydrophilicity.Moreover,the NF performance of PEI/LS LbL assembly membranes can be modulated by bilayer number,polyelectrolyte concentration,and salt content.The water flux reduced while the salt rejection greatly improved as increasing the bilayer numbers,PEI concentration,or NaCl content.More than 95%MgSO4 and MgCl2,as well as 80%NaCl can be rejected by a NF membrane prepared by 6 PEI/LS bilayers,1 wt%PEI,0.5 wt%LS,and 1 mol/L NaCl.Furthermore,this NF membrane can be used to remove more than 95%heavy metal ions(Cd2+,Zn2+,Mn2+,Cr2+,Cu2+,and Ni2+).This work proposed a promising NF membrane by using PEI/LS as low cost polyelectrolytes and facile LbL assembly method,which should receive much attention in water purification.展开更多
Morphology is of great significance to the performance of organic solar cells(OSCs),since appropriate morphology could not only promote the exciton dissociation,but also reduce the charge recombination.In this work,we...Morphology is of great significance to the performance of organic solar cells(OSCs),since appropriate morphology could not only promote the exciton dissociation,but also reduce the charge recombination.In this work,we have developed a solid additive-assisted layer-by-layer(SAA-LBL)processing to fabricate high-efficiency OSCs.By adding the solid additive of fatty acid(FA)into polymer donor PM6 solution,controllable pre-phase separation forms between PM6 and FA.This intermixed morphology facilitates the diffusion of acceptor Y6 into the donor PM6 during the LBL processing,due to the good miscibility and fast-solvation of the FA with chloroform solution dripping.Interestingly,this results in the desired morphology with refined phase-separated domain and vertical phase-separation structure to better balance the charge transport/collection and exciton dissociation.Consequently,the binary single junction OSCs based on PM6:Y6 blend reach champion power conversion efficiency(PCE)of 18.16%with SAA-LBL processing,which can be generally applicable to diverse systems,e.g.,the PM6:L8-BO-based devices and thick-film devices.The efficacy of SAA-LBL is confirmed in binary OSCs based on PM6:L8-BO,where record PCEs of 19.02%and 16.44%are realized for devices with 100 and 250 nm active layers,respectively.The work provides a simple but effective way to control the morphology for high-efficiency OSCs and demonstrates the SAA-LBL processing a promising methodology for boosting the industrial manufacturing of OSCs.展开更多
Layer-by-layer(LBL)assembly shows great potential in fabrication of flexible conductive cotton fabrics(FCCF)with carbon nanotubes(CNT)as conductive components but is limited because complicated chemical modification o...Layer-by-layer(LBL)assembly shows great potential in fabrication of flexible conductive cotton fabrics(FCCF)with carbon nanotubes(CNT)as conductive components but is limited because complicated chemical modification of CNT is usually required.Herein,we reported a facile and eco-friendly LBL approach to fabricating FCCF by dipping in chitosan(CS)aqueous solution and poly(sodium 4-styrenesulfonate)(PSS)wrapped CNT aqueous dispersion alternately.The FCCF with electrical conductivity higher than 30 S/m was achieved when 4 layers of CNT were coated on the cotton fabric(CF).The obtained FCCF possessed outstanding mechanical stability with electrical resistivity almost unchanged after exposure to 500 times mechanical abrasion and 500 circles of tape peeling.The FCCF showed excellent strain sensing performance with high sensitivity(with a gauge factor up to 35.1)and a fast response time(70 ms).It can be used as a strain sensor to accurately detect various human deformations such as finger bending and joint movements.The FCCF could be used as a temperature sensor in that it exhibited stable and reproducible negative temperature sensing behavior in the temperature range of 30-100℃.展开更多
The layer-by-layer(LBL) self assembly of anionic and cationic multi-walled carbon nanotubes(MWNTs) through electrostatic interaction has been carried out to fabricate all-MWNT multilayer films.The alternate uniform as...The layer-by-layer(LBL) self assembly of anionic and cationic multi-walled carbon nanotubes(MWNTs) through electrostatic interaction has been carried out to fabricate all-MWNT multilayer films.The alternate uniform assembly of anionic and cationic MWNTs was investigated by UV-vis spectroscopy.Scanning electron microscopy(SEM) images displayed the growth of the MWNT films.展开更多
Multifunctional（poly（diallyldimethyl ammonium chloride）/sodium poly（4-styrene sulfonate）） n（（PDDA/PSS） n） thin films were fabricated by layer-by-layer assembled on the glass substrate.The monolayer silica na...Multifunctional（poly（diallyldimethyl ammonium chloride）/sodium poly（4-styrene sulfonate）） n（（PDDA/PSS） n） thin films were fabricated by layer-by-layer assembled on the glass substrate.The monolayer silica nanoparticles were prepared on the（PDDA/PSS） n films.The SiO 2-polyelectrolyte coatings exhibit antireflection properties with low refractive index（as low as 1.22）.Interestingly,wavelengths of maximum transmittance could be well tailored by simply changing the particle size of SiO 2.A maximum transmittance of 97.03% in the visible spectral range is achieved for the particle size of 100 nm SiO 2 films.The coatings also show excellent mechanical stability and good adhesion to substrates.The easy availability of the raw materials and simplicity of the fabrication method for such films might make them be potentially useful for various applications.展开更多
Spherical polyelectrolyte brushes （SPBs） consisting of polystyrene （PS） core and poly（2-aminoethyl methacrylate hydrochloride） （PAEMH） shell were prepared by photo-emulsion polymerization. Au nanoparticles （A...Spherical polyelectrolyte brushes （SPBs） consisting of polystyrene （PS） core and poly（2-aminoethyl methacrylate hydrochloride） （PAEMH） shell were prepared by photo-emulsion polymerization. Au nanoparticles （Au-NPs） with controlled size and size distribution were synthesized in situ using SPBs as nanoreactors. Via layer-by-layer deposition technique on the surface of SPBs, nano-composite particles with Au/Ag-NPs bilayer and Au/Ag/Au-NPs trilayer were prepared. The structures of the as-prepared Au/Ag multilayer SPBs were characterized by UV-Vis spectroscopy, TEM, ICP-AES and DLS. The charge reversal of the nano-composite particles observed by zeta potential confirmed the success of layer-by-layer assembly. The Au/Ag-NPs bilayer nano-composite particles showed high catalytic efficiency with an apparent activation energy of about 41.2 kJ/mol in the reduction reaction of 4-nitrophenol to 4-aminophenol in the existence of sodium borohydride monitored. The catalytic activity ofAu/Ag-NPs multilayer SPBs close to that of Au-NPs SPBs and much higher than that of Ag-NPs SPBs reveals its potential applications in cost-effective catalysts with high-performance.展开更多
The simple LBL technique was introduced to fabricate green nacre-like chatosan/montmorillonite （CHI/MMT） films. The results of SEM and XRD analysis demonstrate that the produced CHI/MMT composites films stacked dens...The simple LBL technique was introduced to fabricate green nacre-like chatosan/montmorillonite （CHI/MMT） films. The results of SEM and XRD analysis demonstrate that the produced CHI/MMT composites films stacked densely together to bring out well-defined nacre-like brick-mortar structure. The nanoindentation technique is used to characterize the mechanical properties of the layered nanocomposite films, which show enhanced mechanical modulus （up to -6.64 GPa） compared with the pure chitosan.展开更多
In the past few decades, supercapacitor(SC) has attracted great attention due to its significant advantages over traditional rechargeable battery systems, such as high power density, fast charge-discharge rate, long c...In the past few decades, supercapacitor(SC) has attracted great attention due to its significant advantages over traditional rechargeable battery systems, such as high power density, fast charge-discharge rate, long cycle life and environmental friendliness [1]. Up to now, supercapacitors have been widely used in backup power, electric vehicles, mobile power and so on [2,3].展开更多
In order to get a sound casting of the alloy with a solidification range, the principle of directional solidification (DS) and the layer-by-layer solidification(LBLS) should be followed, especially in designing foundr...In order to get a sound casting of the alloy with a solidification range, the principle of directional solidification (DS) and the layer-by-layer solidification(LBLS) should be followed, especially in designing foundry process of steel casting. Using the principles, the reasons for the forming of the defects on the surface of the chain wheels teeth and groove and the forming of MT (magnetic particle testing) thin lines were analyzed. The results of the metallographic observation and the numerical simulation show that the low temperature gradient results in a wider mushy zone at the S/L interface that causes the defects and MT thin lines on the surface of the chain wheel casting. Based on the analysis, a new casting technology of the chain wheel was designed and used in the casting production successfully.展开更多
Orthopedic implants for the treatment of bone defects from various causes have been challenged by insufficient osseointegration,bacterial infection,oxidative stress,immune rejection,and insufficient individualized tre...Orthopedic implants for the treatment of bone defects from various causes have been challenged by insufficient osseointegration,bacterial infection,oxidative stress,immune rejection,and insufficient individualized treatment.These challenges not only impact treatment outcomes but also severely impact patients’daily lives.Layer-by-Layer(LbL)serves as a simple surface coating technique,in simple terms,to functionalize implants by sequentially adsorbing oppositely charged materials onto a substrate.In orthopaedics,LbL self-assembly technology solves some of the challenges by loading various drugs or biological agents on the implant surface and controlling their release precisely to the site of bone defects in a personalized way.This review will introduce the basic principle and the development of LbL in orthopaedics,review and analyze the chemical strategy of LbL in the preparation of bone implants to ensure the stability of the implant,and introduce the use of LbL bone implants in orthopaedics in recent years.The application of LbL includes the realization of programmed drug delivery and sustained release,thereby promoting osseointegration and the formation of new blood vessels,antibacterial,antioxidant,etc.This review focuses on the LbL technology,involving the technology selection for the preparation of bone implants,the chemical strategies of the stability guarantee of LbL implants,the pharmacological properties,loading and release mechanisms of loaded drugs,and the molecular mechanisms of osteogenesis and angiogenesis.The aim of this review is to provide an overview of current research advances,and a prospect in this field was also described.展开更多
In this paper,the multilayer films of poly-L-lysine（PLL） and DNA were created on TiO2 nanotube surfaces using the layer-by-layer（LBL） self-assembly technique.Chemical compositions of the assembled multilayered fil...In this paper,the multilayer films of poly-L-lysine（PLL） and DNA were created on TiO2 nanotube surfaces using the layer-by-layer（LBL） self-assembly technique.Chemical compositions of the assembled multilayered films were investigated by X-ray photoelectron spectroscopy.Biological properties of the multilayered films were evaluated by the biomimetic mineralization and osteoblast cell culture experiments.The results indicated that PLL and DNA were successfully assembled onto TiO2 nanotube surfaces by electrostatic attraction.Moreover,the samples of assembled PLL or/and DNA had better bioactivity in inducing HA formation and promoting osteoblast cells adhesion,proliferation and early differentiation.展开更多
Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic a...Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic acid）（PSS） and poly（diallyl-dimethylammonium chloride）（PDADMAC） to improve the anchoring of the Ti O2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic Ti O2 nanoparticles to construct Ti O2/PDADMAC bilayer in the Lb L fashion. The number of deposited Ti O2/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust Ti O2 loading. The Lb L technique showed higher Ti O2 loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue（MB）. Results showed that the Ti O2 modified fibers exhibited excellent photocatalytic activity efficiency similar to that of Ti O2 powder dispersed in solution. The deposition of Ti O23 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr.Ti O2-Lb L constructions also preserved Ti O2 adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of Ti O2 particles from the substrate outer surface. However, even in the third cycle, the Ti O2 modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.展开更多
基金supported by the Italian Ministry of University(MIUR)call PRIN 2017 with the project“PANACEA:A technology Platform for the sustainable recovery and advanced use of NAnostructured CEllulose from Agro-food residues”(grant No.2017LEPH3M).
文摘The increasing consciousness about the depletion of natural resources and the sustainability agenda are the major driving forces to try to reuse and recycle organic materials such as agri-food and industrial wastes.In this context,keratin fibers,as a waste from the tannery industry,represent a great opportunity for the development of green functional materials.In this paper,keratin fibers were surface functionalized using the Layer-by-Layer(LbL)deposition technique and then freeze-dried in order to obtain a lightweight,fire-resistant,and sustainable material.The LbL coating,made with chitosan and carboxymethylated cellulose nanofibers,is fundamental in enabling the formation of a self-sustained structure after freeze-drying.The prepared porous fiber networks(density 100 kg m^(-3))display a keratin fiber content greater than 95 wt%and can easily self-extinguish the flame during a flammability test in a vertical configuration.In addition,during forced combustion tests(50 kW m^(-2))the samples exhibited a reduction of 37% in heat release rate and a reduction of 75%in smoke production if compared with a commercial polyurethane foam.The results obtained represent an excellent opportunity for the development of fire-safe sustainable materials based on fiber wastes.
基金supported by the National Natural Science Foundation of China(Grant No.42405029).
文摘Based on reanalysis data and CMIP6 simulations,this study investigates the distinct responses of the cross-equatorial flows(CEFs)over the Maritime Continent(MC)under the simultaneous summer condition of two types of ENSO:central Pacific(CP)and eastern Pacific(EP).Results indicate that CP ENSO tends to exert stronger impacts on CEF.In CP ENSO years,significant lower-level southerly anomalies can be observed across all CEF branches adjacent to MC,accompanied by broader and deeper upper-level northerly anomalies,indicating a well-organized strengthening of both upper-and lowerlevel CEFs.In contrast,CEF anomalies in EP ENSO years tend to be weaker,with significant meridional wind anomalies confined to the east of MC.The disparities in the CEF responses can be elucidated from the perspective of convection over MC,a crucial factor in triggering CEF.In CP ENSO years,westward-leaning sea surface temperature(SST)anomalies result in a distinct cooling in MC and suppressed convection above,driving pronounced CEF anomalies.Conversely,the absence of such organized SST cooling during EP ENSO results in weaker convective forcing and subdued CEF responses.Furthermore,historical simulations from 48 CMIP6 models are utilized to validate the observational findings.Results show that model simulations can successfully reproduce the stronger impacts of CP ENSO,with a remarkable intermodel consistency.This research contributes toward a comprehensive understanding of the diversity in the relationship between CEF and ENSO types,and has implications for seasonal forecasting of CEF variability.
基金funded by geological survey project of China Geological Survey(DD20211404)。
文摘Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of minerals,with reserves of at least 38 of over 80 widely used minerals worldwide accounting for more than30%of the global total reserves.Asia continent experienced three main tectonic evolution and mineralization stages:The Precambrian,the Paleozoic,and the Mesozoic to Cenozoic.The abundant mineral resources in this continent can be divided into seven first-order metallogenic belts(metallogenic domains),18 second-order metallogenic belts(metallogenic provinces),61 third-order metallogenic belts(metallogenic zones),and nine main minerogenetic series.Asia continent exhibits the most significant metallogenic specialization among all continents.Specifically,granite belts of Asia continent manifest pronounced metallogenic specialization of tin,rare metals,and porphyry Cu-Au-Mo deposits.Its maficultramafic rock belts and ophiolite belts display notable metallogenic specialization of lateritic nickel deposits and magmatic type chromite deposits,while its Mesozoic to Cenozoic basalt belts show remarkable metallogenic specialization of lateritic bauxite deposits.Consequently,many giant metallogenic belts were formed,including the Southeast Asian tin belt,the Qinghai-Xizang Plateau rare metal metallogenic belt,the Tethyan porphyry Cu-Au-Mo metallogenic belt,the circum-Pacific porphyry Cu-Au-Mo metallogenic belt,the Southeast Asian lateritic bauxite metallogenic belt,the Deccan Plateau lateritic bauxite metallogenic belt in India,the Southeast Asian lateritic nickel metallogenic belt,and the Tethyan magmatic type chromite metallogenic belt—all of which are significant metallogenic belts in Asia continent.Future mineral exploration in Asia should focus primarily on the Precambrian mineralization of ancient cratons,the Paleozoic mineralization of the Central Asian-Mongolian orogenic belt,and the Mesozoic to Cenozoic mineralization of the Tethyan and circum-Pacific mobile belts.Asia's mining industry not only underpins its own economic growth but also propels global economic development and industrialization,contributing significantly to the world economy.Asia boasts the highest production value of minerals,the largest annual production of minerals,and the greatest trade value of mineral products among all the continents,having emerged as the trade center of global mineral products and the center of the mining industry economy.China is identified as one of the few countries that possess the most comprehensive kinds of minerals,and its mining industry has supported and driven the economic development and industrialization of Asia and even the world.Standing as the largest mineral producer worldwide,China ranked first in the production of 28 mineral commodities in the world in 2022.Besides,China exhibits the highest annual production value of minerals and the largest trade value of mineral products among all countries.Therefore,China's demand for global mineral products influences the global supply and demand patterns of minerals and the world economic situation.
基金Project(2014TDJH104)supported by Shandong University of Science and Technology(SDUST)Research FundChina+3 种基金Project(2013RCJJ006)supported by Scientific Research Foundation of Shandong University of Science and Technology for Recruited TalentsChinaProject(BS2013CL009)supported by Scientific Research Foundation of Shandong for Outstanding Young ScientistChina
文摘To enhance the corrosion resistance of magnesium（Mg） alloy and to impart its surface with antibacterial functionality for inhibiting biofilm formation and biocorrosion, Mg（OH）2 films were fabricated on AZ31 magnesium alloy substrates by an in-situ hydrothermal method and well-defined multilayer coatings, consisting of gentamicin sulfate（GS） and poly（sodium 4-styrene sulfonate）（PSS）, were prepared via layer-by-layer（Lb L） assembly. The morphologies, chemical compositions and corrosion resistance of the obtained（PSS/GS）n/Mg sample were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, electrochemical methods and immersion tests. Finally, the bactericidal activity of（PSS/GS）n/Mg samples against Staphylococcus aureus was assessed by the zone of inhibition methods and plate-counting method. The so-synthesized composite coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance, which make them attractive as coatings for medical implanted devices.
文摘The key technology of semi-continuous conveyor system decides the successful using of this system. The key technology includes optimal initial building depth of this system,the crusher moving step and the layout of conveyor system are studied, and their calculating models are built up.
基金Projects(51571134,51601108)supported by the National Natural Science Foundation of ChinaProject(2013RCJJ006)supported by the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents,China+1 种基金Project(2016ZRB01A62)supported by the Natural Science Foundation of Shandong Province,ChinaProject(2014TDJH104)supported by Shandong University of Science and Technology Research Fund,China
文摘Surface functionalization of magnesium(Mg)alloys is desired to obtain the surfaces with both improved corrosion resistance and antibacterial property.A corrosion-resistant and antimicrobial coating was prepared on Mg alloy surface by layer-by-layer(LbL)assembly of chitosan(CHI)and poly-L-glutamic acid(PGA)by electrostatic attraction.The functionalized surfaces of the Mg alloys were characterized by field-emission scanning electron microscopy(FE-SEM),Fourier transform infrared(FT-IR)spectroscopy and electrochemical tests.The bactericidal activity of the samples against Staphylococcus aureus was assessed by the zone of plate-counting method.The obtained coating on the Mg alloy substrates exhibits good corrosion resistance and antibacterial performance.
基金This work was supported by the National Natural Sci-ence Foundation of China(51571134)Shandong Provincial Natural Science Foundation(ZR2017BEM002)Shan-dong University of Science and Technology Research Fund(2014TDJH104).
文摘A chitosan/deoxyribonucleic acid(CHI/DNA)_(5)coating was constructed by layer-by-layer(LbL)assembly dip coating method with Mg(OH)_(2)coating as an inner protective layer on AZ31 alloy.X-ray diffractometry,X-ray photoelectron spectrometry,Fourier transform infrared spectroscopy and field-emission scanning electron microscopy were utilized to represent the chemical compositions and surface morphologies of the coatings.Electrochemical tests and hydrogen evolution measurements were implemented to confirm the good corrosion resistance of the composite coating in artificial body fluid.Antimicrobial activity of the composite coatings was tested via the plate-counting method,and the cytotoxicity of the samples was appraised by MTT assay and Live/dead staining.A double action was put into effect for the composite coating,which the inner Mg(OH)2 coating plays the part of physical barrier,and the outer(CHI/DNA)5 coating is employed as an inducer to fabricate a biocompatible Ca-P corrosion product coating during immersion,making up for its thin thickness.Otherwise,the composite coating is also beneficial for the growth of bone,resulting from the biomineralization effect of the outer polyelectrolyte multilayer.The good antibacterial property of the(CHI/DNA)5/Mg(OH)2 coating is ascribed to the contact-killing strength of CHI.Thus,the obtained(CHI/DNA)5/Mg(OH)2 coating has a wide application prospect in the field of Mg-based bone implantation.
基金Supported by the National Basic Research Program of China(2015CB655301)the Natural Science Foundation of China(21825803)+2 种基金and the Natural Science Foundation of Jiangsu Province(BK20150063)the Program of Excellent Innovation Teams of Jiangsu Higher Education Institutionsthe Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly permeable gradient phenolic membranes with tight selectivity are used as substrates to prepare TFC membranes with high permeances by the layer-by-layer assembly method. The negatively charged phenolic substrates are alternately assembled with polycation polyethylenimine(PEI) and polyanion poly(acrylic acid)(PAA)as a result of electrostatic interactions, forming thin and compact PEI/PAA layers tightly attached to the substrate surface. Benefiting from the high permeances and tight surface pores of the gradient nanoporous structures of the substrates, the produced PEI/PAA membranes exhibit a permeance up to 506 L? m-2?h-1?MPa-1, which is ~2–10 times higher than that of other membranes with similar rejections. The PEI/PAA membranes are capable of retaining N 96.1% of negatively charged dyes following the mechanism of electrostatic repulsion. We demonstrate that the membranes can also separate positively and neutrally charged dyes from water via other mechanisms.This work opens a new avenue for the design and preparation of high-flux NF membranes, which is also applicable to enhance the permeance of other TFC membranes.
基金Zhejiang Provincial Natural Science Foundation of China(No.LY18E030002)Natural Science Foundation of Ningbo(No.2018A610111)K.C.Wong Magna Fund in Ningbo University.
文摘Layer-by-layer(LbL)assembly technology is a facile method for constructing thin film composite membrane.Herein,a novel nanofiltration(NF)membrane was prepared by LbL assembly of polyethyleneimine(PEI)and sodium lignosulfonate(LS)followed by cross-linking.The surface composition,morphology,and property of PEI/LS bilayer were detailedly investigated by FTIR/ATR,XPS,SEM,AFM,and water contact angle test.The PEI/LS bilayer full of amino and hydroxyl groups presents increased roughness and improved hydrophilicity.Moreover,the NF performance of PEI/LS LbL assembly membranes can be modulated by bilayer number,polyelectrolyte concentration,and salt content.The water flux reduced while the salt rejection greatly improved as increasing the bilayer numbers,PEI concentration,or NaCl content.More than 95%MgSO4 and MgCl2,as well as 80%NaCl can be rejected by a NF membrane prepared by 6 PEI/LS bilayers,1 wt%PEI,0.5 wt%LS,and 1 mol/L NaCl.Furthermore,this NF membrane can be used to remove more than 95%heavy metal ions(Cd2+,Zn2+,Mn2+,Cr2+,Cu2+,and Ni2+).This work proposed a promising NF membrane by using PEI/LS as low cost polyelectrolytes and facile LbL assembly method,which should receive much attention in water purification.
基金supported by the National Key Research and Development Program of China(No.2019YFA0705900)the National Natural Science Foundation of China(Nos.52127806,52173185,21734008,and 61721005)+1 种基金the Fundamental Research Funds for the Central Universities(No.226-2022-00133 and No.226-2022-00209)research start up fund from Zhejiang University。
文摘Morphology is of great significance to the performance of organic solar cells(OSCs),since appropriate morphology could not only promote the exciton dissociation,but also reduce the charge recombination.In this work,we have developed a solid additive-assisted layer-by-layer(SAA-LBL)processing to fabricate high-efficiency OSCs.By adding the solid additive of fatty acid(FA)into polymer donor PM6 solution,controllable pre-phase separation forms between PM6 and FA.This intermixed morphology facilitates the diffusion of acceptor Y6 into the donor PM6 during the LBL processing,due to the good miscibility and fast-solvation of the FA with chloroform solution dripping.Interestingly,this results in the desired morphology with refined phase-separated domain and vertical phase-separation structure to better balance the charge transport/collection and exciton dissociation.Consequently,the binary single junction OSCs based on PM6:Y6 blend reach champion power conversion efficiency(PCE)of 18.16%with SAA-LBL processing,which can be generally applicable to diverse systems,e.g.,the PM6:L8-BO-based devices and thick-film devices.The efficacy of SAA-LBL is confirmed in binary OSCs based on PM6:L8-BO,where record PCEs of 19.02%and 16.44%are realized for devices with 100 and 250 nm active layers,respectively.The work provides a simple but effective way to control the morphology for high-efficiency OSCs and demonstrates the SAA-LBL processing a promising methodology for boosting the industrial manufacturing of OSCs.
基金financially supported by the Natural Science Foundation of Chongqing,China(No.cstc2021jcyj-msxmX0943)the Chongqing Talent Plan for Young Top-Notch Talents(No.CQYC2021059217)the Foundation of Science and Technology Department of Sichuan Province(No.2022YFH0019).
文摘Layer-by-layer(LBL)assembly shows great potential in fabrication of flexible conductive cotton fabrics(FCCF)with carbon nanotubes(CNT)as conductive components but is limited because complicated chemical modification of CNT is usually required.Herein,we reported a facile and eco-friendly LBL approach to fabricating FCCF by dipping in chitosan(CS)aqueous solution and poly(sodium 4-styrenesulfonate)(PSS)wrapped CNT aqueous dispersion alternately.The FCCF with electrical conductivity higher than 30 S/m was achieved when 4 layers of CNT were coated on the cotton fabric(CF).The obtained FCCF possessed outstanding mechanical stability with electrical resistivity almost unchanged after exposure to 500 times mechanical abrasion and 500 circles of tape peeling.The FCCF showed excellent strain sensing performance with high sensitivity(with a gauge factor up to 35.1)and a fast response time(70 ms).It can be used as a strain sensor to accurately detect various human deformations such as finger bending and joint movements.The FCCF could be used as a temperature sensor in that it exhibited stable and reproducible negative temperature sensing behavior in the temperature range of 30-100℃.
基金supported by the Starting Foundation of Renmin University of China and the National Natural Science Foundation of China(No.20703066).
文摘The layer-by-layer(LBL) self assembly of anionic and cationic multi-walled carbon nanotubes(MWNTs) through electrostatic interaction has been carried out to fabricate all-MWNT multilayer films.The alternate uniform assembly of anionic and cationic MWNTs was investigated by UV-vis spectroscopy.Scanning electron microscopy(SEM) images displayed the growth of the MWNT films.
基金Supported by the National Science Foundation of China(21174108)the Fundamental Research Funds for the Central Universities(20102020201000017)
文摘Multifunctional（poly（diallyldimethyl ammonium chloride）/sodium poly（4-styrene sulfonate）） n（（PDDA/PSS） n） thin films were fabricated by layer-by-layer assembled on the glass substrate.The monolayer silica nanoparticles were prepared on the（PDDA/PSS） n films.The SiO 2-polyelectrolyte coatings exhibit antireflection properties with low refractive index（as low as 1.22）.Interestingly,wavelengths of maximum transmittance could be well tailored by simply changing the particle size of SiO 2.A maximum transmittance of 97.03% in the visible spectral range is achieved for the particle size of 100 nm SiO 2 films.The coatings also show excellent mechanical stability and good adhesion to substrates.The easy availability of the raw materials and simplicity of the fabrication method for such films might make them be potentially useful for various applications.
基金financially supported by the National Natural Science Foundation of China(No.51273063 and 51003028)the Fundamental Research Funds for the Central Universities+1 种基金the Higher School Specialized Research Fund for the Doctoral Program(No.20110074110003)111 Project Grant(No.B08021)
文摘Spherical polyelectrolyte brushes （SPBs） consisting of polystyrene （PS） core and poly（2-aminoethyl methacrylate hydrochloride） （PAEMH） shell were prepared by photo-emulsion polymerization. Au nanoparticles （Au-NPs） with controlled size and size distribution were synthesized in situ using SPBs as nanoreactors. Via layer-by-layer deposition technique on the surface of SPBs, nano-composite particles with Au/Ag-NPs bilayer and Au/Ag/Au-NPs trilayer were prepared. The structures of the as-prepared Au/Ag multilayer SPBs were characterized by UV-Vis spectroscopy, TEM, ICP-AES and DLS. The charge reversal of the nano-composite particles observed by zeta potential confirmed the success of layer-by-layer assembly. The Au/Ag-NPs bilayer nano-composite particles showed high catalytic efficiency with an apparent activation energy of about 41.2 kJ/mol in the reduction reaction of 4-nitrophenol to 4-aminophenol in the existence of sodium borohydride monitored. The catalytic activity ofAu/Ag-NPs multilayer SPBs close to that of Au-NPs SPBs and much higher than that of Ag-NPs SPBs reveals its potential applications in cost-effective catalysts with high-performance.
基金financially supported by the National Basic Research Program of China(No.2010CB934700)the Doctoral Fund of Innovation of Beijing University of Technology
文摘The simple LBL technique was introduced to fabricate green nacre-like chatosan/montmorillonite （CHI/MMT） films. The results of SEM and XRD analysis demonstrate that the produced CHI/MMT composites films stacked densely together to bring out well-defined nacre-like brick-mortar structure. The nanoindentation technique is used to characterize the mechanical properties of the layered nanocomposite films, which show enhanced mechanical modulus （up to -6.64 GPa） compared with the pure chitosan.
基金financially supported by the Shandong Provincial Natural Science Foundation, China (ZR2019PB018)National Natural Science Foundation, China (21506210)。
文摘In the past few decades, supercapacitor(SC) has attracted great attention due to its significant advantages over traditional rechargeable battery systems, such as high power density, fast charge-discharge rate, long cycle life and environmental friendliness [1]. Up to now, supercapacitors have been widely used in backup power, electric vehicles, mobile power and so on [2,3].
文摘In order to get a sound casting of the alloy with a solidification range, the principle of directional solidification (DS) and the layer-by-layer solidification(LBLS) should be followed, especially in designing foundry process of steel casting. Using the principles, the reasons for the forming of the defects on the surface of the chain wheels teeth and groove and the forming of MT (magnetic particle testing) thin lines were analyzed. The results of the metallographic observation and the numerical simulation show that the low temperature gradient results in a wider mushy zone at the S/L interface that causes the defects and MT thin lines on the surface of the chain wheel casting. Based on the analysis, a new casting technology of the chain wheel was designed and used in the casting production successfully.
文摘Orthopedic implants for the treatment of bone defects from various causes have been challenged by insufficient osseointegration,bacterial infection,oxidative stress,immune rejection,and insufficient individualized treatment.These challenges not only impact treatment outcomes but also severely impact patients’daily lives.Layer-by-Layer(LbL)serves as a simple surface coating technique,in simple terms,to functionalize implants by sequentially adsorbing oppositely charged materials onto a substrate.In orthopaedics,LbL self-assembly technology solves some of the challenges by loading various drugs or biological agents on the implant surface and controlling their release precisely to the site of bone defects in a personalized way.This review will introduce the basic principle and the development of LbL in orthopaedics,review and analyze the chemical strategy of LbL in the preparation of bone implants to ensure the stability of the implant,and introduce the use of LbL bone implants in orthopaedics in recent years.The application of LbL includes the realization of programmed drug delivery and sustained release,thereby promoting osseointegration and the formation of new blood vessels,antibacterial,antioxidant,etc.This review focuses on the LbL technology,involving the technology selection for the preparation of bone implants,the chemical strategies of the stability guarantee of LbL implants,the pharmacological properties,loading and release mechanisms of loaded drugs,and the molecular mechanisms of osteogenesis and angiogenesis.The aim of this review is to provide an overview of current research advances,and a prospect in this field was also described.
基金supported by the National Natural Science Foundation of China (No. 31570955)Applied Basic Research Programs of Sichuan Province, China (No. 2015JY0036)
文摘In this paper,the multilayer films of poly-L-lysine（PLL） and DNA were created on TiO2 nanotube surfaces using the layer-by-layer（LBL） self-assembly technique.Chemical compositions of the assembled multilayered films were investigated by X-ray photoelectron spectroscopy.Biological properties of the multilayered films were evaluated by the biomimetic mineralization and osteoblast cell culture experiments.The results indicated that PLL and DNA were successfully assembled onto TiO2 nanotube surfaces by electrostatic attraction.Moreover,the samples of assembled PLL or/and DNA had better bioactivity in inducing HA formation and promoting osteoblast cells adhesion,proliferation and early differentiation.
基金supported by Rachadapisek Sompote Fund for Postdoctoral Fellowship, Chulalongkorn University, Thailandthe Nanotechnology Center (NANOTEC), NSTDA Ministry of Science and Technology, Thailand, through its program of Center of Excellence Network+1 种基金National Research University Project of CHEthe Rachadapisek Sompote Endowment Fund (No. AM1041A)
文摘Polypropylene（PP） meltblown fibers were coated with titanium dioxide（Ti O2） nanoparticles using layer-by-layer（Lb L） deposition technique. The fibers were first modified with 3layers of poly（4-styrenesulfonic acid）（PSS） and poly（diallyl-dimethylammonium chloride）（PDADMAC） to improve the anchoring of the Ti O2 nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic Ti O2 nanoparticles to construct Ti O2/PDADMAC bilayer in the Lb L fashion. The number of deposited Ti O2/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust Ti O2 loading. The Lb L technique showed higher Ti O2 loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue（MB）. Results showed that the Ti O2 modified fibers exhibited excellent photocatalytic activity efficiency similar to that of Ti O2 powder dispersed in solution. The deposition of Ti O23 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr.Ti O2-Lb L constructions also preserved Ti O2 adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of Ti O2 particles from the substrate outer surface. However, even in the third cycle, the Ti O2 modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.
